nach oben

Rock Mechanics and Rock Engineering

Erschienen in:

26.12.2023 | Original Paper

Experimental Study on Shear Characteristics of a Rock Joint Subjected to Dynamic Shear Load

verfasst von: W. Yuan, J. C. Li, Y. L. Zheng, Z. J. Wang

Erschienen in: Rock Mechanics and Rock Engineering | Ausgabe 4/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Exploring the mechanical response of rock joint subjected to dynamic shear load is essential for revealing the mechanism of dynamic disasters in jointed rock masses. Using an impact-induced direct-shear method, a series of dynamic shear experiments were conducted on artificial granite joints with regularly undulating interface. The dynamic friction coefficient of joint was first obtained from planar jointed granite specimens before the dynamic shear strength and shear displacement of the regularly undulating joints were tested. During the test, the effects of normal stress and shear rate were both considered. The results show that when the shear velocity ranges from 1 to 9 m/s, the dynamic friction coefficient of the planar joint is negatively correlated with shear velocity, and decreases by at least 50% compared with that under quasi-static condition. The rate dependence of shear strength appears opposite for granite joints with undulating angles of 11.3° and 26.6°, respectively. A shear strength model for rock joint with an undulating angle of 11.3° is then suggested based on the test results. During impact shear sliding, the maximum shear displacement of the joint is linearly negatively related to the initial normal stress. While, non-driven sliding may occur under low normal stress and high impact velocity, which leads to a large magnitude of shear slip.

Vorheriger Artikel The Role of a Rock Discontinuity’s Micro-structure and Aperture on the Detection of Seismic Precursors to Shear Failure

Nächster Artikel Effects of Loading Rate and Notch Geometry on Dynamic Fracture Behavior of Rocks Containing Blunt V-Notched Defects

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Atapour H, Moosavi M (2013) The influence of shearing velocity on shear behavior of artificial joints. Rock Mech Rock Eng 47(5):1745–1761. https://doi.org/10.1007/s00603-013-0481-9CrossRef

Barbero M, Barla G, Zaninetti A (1996) Dynamic shear strength of rock joints subjected to impulse loading. Int J Rock Mech Min Sci Geomech Abstr 33(2):141–151. https://doi.org/10.1016/0148-9062(95)00049-6CrossRef

Crawford AM, Curran JH (1981) The influence of shear velocity on the frictional resistance of rock discontinuities. Int J Rock Mech Min Sci Geomech Abstr 18(6):505–515. https://doi.org/10.1016/0148-9062(81)90514-3CrossRef

Dang W, Chen J, Huang L (2021) Experimental study on the velocity-dependent frictional resistance of a rough rock fracture exposed to normal load vibrations. Acta Geotech 16:2189–2202. https://doi.org/10.1007/s11440-021-01168-yCrossRef

Deng XF, Zhu JB, Chen SG, Zhao ZY, Zhou YX, Zhao J (2014) Numerical study on tunnel damage subject to blast-induced shock wave in jointed rock masses. Tunn Undergr Sp Tech 43:88–100. https://doi.org/10.1016/j.tust.2014.04.004CrossRef

Dowding CH, Rozen A (1978) Damage to rock tunnels from earthquake loading. J Geotech Eng Division 104(2):175–191CrossRef

Fan LF, Yang QH, Du XL (2023) Spalling characteristics of high-temperature treated granitic rock at different strain rates. J Rock Mech Geotech Eng. https://doi.org/10.1016/j.jrmge.2023.05.016CrossRef

Fathi A, Moradian Z, Rivard P, Ballivy G, Boyd AJ (2015) Geometric effect of asperities on shear mechanism of rock joints. Rock Mech Rock Eng 49(3):801–820. https://doi.org/10.1007/s00603-015-0799-6CrossRef

Fathi A, Moradian Z, Rivard P, Ballivy G (2016) Shear mechanism of rock joints under pre-peak cyclic loading condition. Int J Rock Mech Min Sci 83:197–210. https://doi.org/10.1016/j.ijrmms.2016.01.009CrossRef

Han GS, Jing HW, Jiang YJ, Liu RC, Wu JY (2019) Effect of cyclic loading on the shear behaviours of both unfilled and infilled rough rock joints under constant normal stiffness conditions. Rock Mech Rock Eng 53(1):31–57. https://doi.org/10.1007/s00603-019-01866-wCrossRef

Huang S, Feng XT, Xia K (2011) A dynamic punch method to quantify the dynamic shear strength of brittle solids. Rev Sci Instrum 82(5):053901. https://doi.org/10.1063/1.3585983CrossRef

Jiang Y, Xiao J, Tanabashi Y, Mizokami T (2004) Development of an automated servo-controlled direct shear apparatus applying a constant normal stiffness condition. Int J Rock Mech Min Sci 41(2):275–286. https://doi.org/10.1016/j.ijrmms.2003.08.004CrossRef

Ju MH, Li JC, Yao QL, Li XF, Zhao J (2019) Rate effect on crack propagation measurement results with crack propagation gauge, digital image correlation, and visual methods. Eng Fract Mech 219:106537. https://doi.org/10.1016/j.engfracmech.2019.106537CrossRef

Li HH (2017) Mechanical responses of rock joints with regular asperities under various shear rates investigated by double shear test. J Test Eval 45(2):470–483. https://doi.org/10.1520/jte20150314CrossRef

Li JL, Zhao GF (2023) Further development of digital image correlation (DIC) to measure the discontinuous deformation of rock on small-scale tests. Rock Mech Rock Eng 56:1163–1183. https://doi.org/10.1007/s00603-022-03120-2CrossRef

Li HB, Feng HP, Liu B (2006) Study on strength behaviors of rock joints under different shearing deformation velocities. Chin J Rock Mech Eng 25(12):2435–2440 (in Chinese)

Li JC, Li HB, Jiao YY, Liu YQ, Xia X, Yu C (2014) Analysis for oblique wave propagation across filled joints based on thin-layer interface model. J Appl Geophys 102:39–46. https://doi.org/10.1016/j.jappgeo.2013.11.014CrossRef

Li JC, Yuan W, Li HB, Zou CJ (2022a) Study on dynamic shear deformation behaviors and test methodology of sawtooth-shaped rock joints under impact load. Int J Rock Mech Min Sci 158:105210. https://doi.org/10.1016/j.ijrmms.2022.105210CrossRef

Li Z, Wu W, Li J, Zhao J (2022b) Dynamic tensile failure of a V-shaped canyon induced by vertically travelling SV waves. Soil Dyn Earthq Eng 162:107458. https://doi.org/10.1016/j.soildyn.2022.107458CrossRef

Liu K, Zhao J (2021) Progressive damage behaviours of triaxially confined rocks under multiple dynamic loads. Rock Mech Rock Eng 54(6):3327–3358. https://doi.org/10.1007/s00603-021-02408-zCrossRef

Liu K, Zhang QB, Wu G, Li JC, Zhao J (2019) Dynamic mechanical and fracture behaviour of sandstone under multiaxial loads using a triaxial Hopkinson bar. Rock Mech Rock Eng 52(7):2175–2195. https://doi.org/10.1007/s00603-018-1691-yCrossRef

Liu K, Zhao J, Wu G, Maksimenko A, Haque A, Zhang QB (2020) Dynamic strength and failure modes of sandstone under biaxial compression. Int J Rock Mech Min Sci 128:104260. https://doi.org/10.1016/j.ijrmms.2020.104260CrossRef

Luo GM, Qi SW, Zheng BW (2022) Rate effect on the direct shear behavior of granite rock bridges at low to subseismic shear rates. J Geophys Res-Sol Ea 127:e2022JB024348. https://doi.org/10.1029/2022JB024348CrossRef

Mehrishal S, Sharifzadeh M, Shahriar K, Song JJ (2016) An experimental study on normal stress and shear rate dependency of basic friction coefficient in dry and wet limestone joints. Rock Mech Rock Eng 49(12):4607–4629. https://doi.org/10.1007/s00603-016-1073-2CrossRef

Meng FZ, Wong LNY, Zhou H, Yu J, Cheng GT (2019) Shear rate effects on the post-peak shear behaviour and acoustic emission characteristics of artificially split granite joints. Rock Mech Rock Eng 52(7):2155–2174. https://doi.org/10.1007/s00603-018-1722-8CrossRef

Mirzaghorbanali A, Nemcik J, Aziz N (2013) Effects of shear rate on cyclic loading shear behaviour of rock joints under constant normal stiffness conditions. Rock Mech Rock Eng 47(5):1931–1938. https://doi.org/10.1007/s00603-013-0453-0CrossRef

Niktabar SMM, Rao KS, Shrivastava AK (2017) Effect of rock joint roughness on its cyclic shear behavior. J Rock Mech Geotech Eng 9:1071–1084. https://doi.org/10.1016/j.jrmge.2017.09.001CrossRef

Patton FD (1966) Multiple modes of shear failure in rock. 1st ISRM Congress. International Society for Rock Mechanics, Lisbon, pp 509–515

Qi SW, Zheng BW, Wu FQ, Huang XL, Guo SF, Zhan ZF, Zou Y, Barla G (2020) A new dynamic direct shear testing device on rock joints. Rock Mech Rock Eng 53(10):4787–4798. https://doi.org/10.1007/s00603-020-02175-3CrossRef

Reu P (2014) All about speckles: Aliasing. Exp Techniques 38:1–3. https://doi.org/10.1111/ext.12111CrossRef

Tang ZC, Wong LNY (2015) Influences of normal loading rate and shear velocity on the shear behavior of artificial rock joints. Rock Mech Rock Eng 49(6):2165–2172. https://doi.org/10.1007/s00603-015-0822-yCrossRef

Tang ZC, Huang RQ, Liu QS, Wong LNY (2015) Effect of contact state on the shear behavior of artificial rock joint. B Eng Geol Environ 75(2):761–769. https://doi.org/10.1007/s10064-015-0776-zCrossRef

Tang ZC, Zhang ZF, Zuo CQ, Jiao YY (2021) Peak shear strength criterion for mismatched rock joints: revisiting JRC-JMC criterion. Int J Rock Mech Min Sci 147:104894. https://doi.org/10.1016/j.ijrmms.2021.104894CrossRef

Wang G, Zhang XP, Jiang YJ, Wu XZ, Wang SG (2016) Rate-dependent mechanical behavior of rough rock joints. Int J Rock Mech Min Sci 83:231–240. https://doi.org/10.1016/j.ijrmms.2015.10.013CrossRef

Wang Z, Gu L, Shen M, Zhang F, Zhang G, Deng S (2020) Influence of shear rate on the shear strength of discontinuities with different joint roughness coefficients. Geotech Test J 43(3):683–700. https://doi.org/10.1520/gtj20180291CrossRef

Wang FL, Xia KW, Yao W, Wang SH, Wang CL, Xiu ZG (2021) Slip behavior of rough rock discontinuity under high velocity impact: experiments and models. Int J Rock Mech Min Sci 144:104831. https://doi.org/10.1016/j.ijrmms.2021.104831CrossRef

Wang X, Li JC, Zhao XB, Liang Y (2022) Propagation characteristics and prediction of blast-induced vibration on closely spaced rock tunnels. Tunn Undergr Sp Tech 123:104416. https://doi.org/10.1016/j.tust.2022.104416CrossRef

Wu W (2015) Slip initiation of granular gouge friction in a rock discontinuity induced by static and dynamic loads. Int J Rock Mech Min Sci 80:196–201. https://doi.org/10.1016/j.ijrmms.2015.09.021CrossRef

Wu W, Zhao J (2013) A dynamic-induced direct-shear model for dynamic triggering of frictional slip on simulated granular gouges. Exp Mech 54(4):605–613. https://doi.org/10.1007/s11340-013-9823-5CrossRef

Wu Q, Xu YJ, Tang HM, Fang K, Jiang YF, Liu CY, Wang LQ, Wang XH, Kang JT (2018) Investigation on the shear properties of discontinuities at the interface between different rock types in the Badong formation, China. Eng Geol 245:280–291. https://doi.org/10.1016/j.enggeo.2018.09.002CrossRef

Wu W, Gong F, Ren L, He L (2023) Strain rockburst failure characteristics and mechanism of high stress circular hard rock tunnel triggered by dynamic impact load. Int J Rock Mech Min Sci 171:105575. https://doi.org/10.1016/j.ijrmms.2023.105575CrossRef

Xie H, Pariseau WG (1992) Fractal estimation of the joint roughness coefficients. Proceeding of International Conference of Fract Jointed Rock Masses. Balkema, Rotterdam, pp 125–131

Xie X, Li J, Zheng Y (2023) Experimental study on dynamic mechanical and failure behavior of a jointed rock mass. Int J Rock Mech Min Sci 168:105415. https://doi.org/10.1016/j.ijrmms.2023.105415CrossRef

Xing HZ, Zhang QB, Braithwaite CH, Pan B, Zhao J (2017) High-speed photography and digital optical measurement techniques for geomaterials: fundamentals and applications. Rock Mech Rock Eng 50(6):1611–1659. https://doi.org/10.1007/s00603-016-1164-0CrossRef

Yao W, Wang C, Xia K, Zhang X (2021) An experimental system to evaluate impact shear failure of rock discontinuities. Rev Sci Instrum 92(3):034501. https://doi.org/10.1063/5.0032003

Yuan W, Li JC (2021a) Study on the effects and its mechanism of shear rate on friction of planar joints. Chin J Rock Mech Eng 40(S2):3241–3252 (in Chinese)

Yuan W, Li JC (2021b) Experimental research on the shear-rate-dependent shear strength of rock-like joints. IOP Conf Ser 861:042079. https://doi.org/10.1088/1755-1315/861/4/042079CrossRef

Zhang QB, Zhao J (2013) A review of dynamic experimental techniques and mechanical behaviour of rock materials. Rock Mech Rock Eng 47(4):1411–1478. https://doi.org/10.1007/s00603-013-0463-yCrossRef

Zhang CQ, Feng XT, Zhou H, Qiu SL, Wu WP (2012) Case histories of four extremely intense rockbursts in deep tunnels. Rock Mech Rock Eng 45(3):275–288. https://doi.org/10.1007/s00603-011-0218-6CrossRef

Zhao J (1997a) Joint surface matching and shear strength part A: joint matching coefficient (JMC). Int J Rock Mech Min Sci 34:173–178. https://doi.org/10.1016/S0148-9062(96)00062-9CrossRef

Zhao J (1997b) Joint surface matching and shear strength part B: JRC-JMC shear strength criterion. Int J Rock Mech Min Sci 34(2):179–185. https://doi.org/10.1016/S0148-9062(96)00063-0CrossRef

Zhao XB, Zhao J, Hefny AM, Cai JG (2006) Normal transmission of S-wave across parallel fractures with Coulomb slip behavior. J Eng Mech 132:641–650. https://doi.org/10.1061/(ASCE)0733-9399(2006)132:6(641)CrossRef

Zhu YG, Wang G, Li AQ, Chen HY, Liu TF, Guan H (2023) Effects of joint roughness, shear rate, and normal stress on shear behavior and acoustic emission characteristics in two parallel coplanar intermittently jointed rock: an experimental study. Rock Mech Rock Eng 56(2):1289–1303. https://doi.org/10.1007/s00603-022-03137-7CrossRef

Titel: Experimental Study on Shear Characteristics of a Rock Joint Subjected to Dynamic Shear Load
verfasst von: W. Yuan
J. C. Li
Y. L. Zheng
Z. J. Wang
Publikationsdatum: 26.12.2023
Verlag: Springer Vienna
Erschienen in: Rock Mechanics and Rock Engineering / Ausgabe 4/2024
Print ISSN: 0723-2632
Elektronische ISSN: 1434-453X
DOI: https://doi.org/10.1007/s00603-023-03692-7

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2024

Revealing Size Effect and Associated Variability of Rocks Based on BPM–μDFN Modelling: Significance of Internal Microstructure and Strain Rate

A Generalized Failure Mode Model for Transversely Isotropic Rocks Using a Machine Learning Classification Approach

The Analysis of the Fracturing Mechanism and Brittleness Characteristics of Anisotropic Shale Based on Finite-Discrete Element Method

Disturbance mechanical behaviors and anisotropic fracturing mechanisms of rock under novel three-stage true triaxial static-dynamic coupling loading

Insights into the Effect of Water Content on Mudstone Fragmentation and Cutter Force during TBM Cutter Indentation via the Combined Finite-Discrete Element Method

Water Effects on Elastic S-Wave Propagation and Attenuation Across Single Clay-Rich Rock Fractures: Insights from Ultrasonic Measurements