nach oben

International Journal on Interactive Design and Manufacturing (IJIDeM)

Erschienen in:

26.10.2022 | Review

Exploring the application sphere of electrical discharge machining in composite materials considering surface features: a content analysis

verfasst von: Arvinder Singh Channi, Harminder Singh Bains, Jasmaninder Singh Grewal, Raman Kumar, Dharam Buddhi

Erschienen in: International Journal on Interactive Design and Manufacturing (IJIDeM) | Ausgabe 5/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The quantitative content analysis focuses on identifying and quantifying, whereas the qualitative approach focuses on analyzing and comprehending. It examines words, ideas, and concepts in both forms of writing before analyzing the results. This paper investigated the effectiveness of keywords as a metric for collecting the information and philosophy of science offered in EDM articles in composite materials considering surface roughness/finish/integrity. It consists of 440 articles published from 2000 to 2021 and collected from Scopus. The content analysis includes author and index keywords, word clouds, three field plots, a tree map of title and abstract terms, and word growth of the top keywords. Content analysis was performed with the assistance of VOSviwer and Biblioshiny. The latest trends, future roadmaps, and concluding annotations are presented at the end of the analysis. Buddy researchers working in the field may use content analysis to identify research hotspots and gaps. Scholars can quantify and analyze the existence, meanings, and linkages of specific phrases, patterns, or notions.

Vorheriger Artikel 4D printing of thermoresponsive materials: a state-of-the-art review and prospective applications

Nächster Artikel Review on multi-objective optimization of FDM process parameters for composite materials

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Baroi, B.K., Jagadish, Patowari, P.K.: A review on sustainability, health, and safety issues of electrical discharge machining. J. Brazilian Soc. Mech. Sci. Eng. 44(2) (2022). doi:https://doi.org/10.1007/s40430-021-03351-4

Sakthivel, M., Vijayakumar, S., Channankaiah, Rajesh, M.: An overview of delamination in conventional and vibration assisted drilling on glass fiber reinforced polymer composites. J. Chem. Pharm. Sci. 8(1), 99–104 (2015)

Pandey, A.K., Anas, M.: Sustainability and recent trends in micro- electric discharge machining (µ-EDM): A state-of-the-art review. Materials Today: Proceedings:2049–2055. doi: (2022). https://doi.org/10.1016/j.matpr.2021.11.250

Kiran, L.S.N.V.P., Satyanarayana, D.: An improvement of die sinking edm using on hybrid metal matrix composites. Int. J. Sci. Technol. Res. 9(2), 2413–2418 (2020)

Gous, M.Z., Pandey, A., Sarfaraj, S., Tamboli, S.: Fabrication and machining of fiber based composite materials using advance machining process, a review. Materials Today: Proceedings:3617–3622. doi: (2022). https://doi.org/10.1016/j.matpr.2021.12.070

Shyn, C.S., Rajesh, R.: Optimization algorithms and intelligent techniques on electrical discharge machining process. Intl J. Model. Simul. Sci. Comput. 12(4) (2021). doi:https://doi.org/10.1142/S179396232150015X

Thakur, S.S., Patel, B., Upadhyay, R.K., Bagal, D.K., Barua, A.: Machining characteristics of metal matrix composite in powder-mixed electrical discharge machining–A review. Aust J. Mech. Eng. (2022). doi:https://doi.org/10.1080/14484846.2022.2030089CrossRef

Goyal, K.K., Sharma, N., Gupta, R.D., Singh, G., Rani, D., Banga, H.K., Kumar, R., Pimenov, D.Y., Giasin, K.: A Soft Computing-Based Analysis of Cutting Rate and Recast Layer Thickness for AZ31 Alloy on WEDM Using RSM-MOPSO. Materials. 15(2) (2022). doi:https://doi.org/10.3390/ma15020635

Zhang, C.: Effect of wire electrical discharge machining (WEDM) parameters on surface integrity of nanocomposite ceramics. Ceram. Int. 40, 9657–9662 (2014). doi:https://doi.org/10.1016/j.ceramint.2014.02.046CrossRef

10.

Uhlmann, E., Schimmelpfennig, T.-M., Perfilov, I., Streckenbach, J., Schweitzer, L.: Comparative Analysis of Dry-EDM and Conventional EDM for the Manufacturing of Micro Holes in Si3N4-TiN. Procedia CIRP. 42, 173–178 (2016). doi:https://doi.org/10.1016/j.procir.2016.02.214CrossRef

11.

Sakthivel, M., Vijayakumar, S., Channankaiah, Rajesh, M.: A review on delamination in conventional and vibrated assisted drilling in glass fiber reinforced polymer composites. Int. J. ChemTech Res. 7(6), 2794–2801 (2014)

12.

Kataria, R., Kumar, J.: Machining of WC-Co composites- A review. Materials Science Forum, vol 808. Trans Tech Publications Ltd. doi: (2015). https://doi.org/10.4028/www.scientific.net/MSF.808.51

13.

Das, A., Ambastha, S., Priyadarshni, N., Samanta, S., Nagahanumaiah: Fabrication of hydrophobic surfaces on Titanium using Micro-EDM exhibiting antibacterial properties. Proc. Inst. Mech. Eng. Part. B J. Eng. Manuf. 236(8), 1093–1101 (2022). doi:https://doi.org/10.1177/09544054211060981CrossRef

14.

Mohanty, S., Routara, B.C.: A review on machining of metal matrix composites using nanoparticle mixed dielectric in electro-discharge machining. Int. J. Automot. Mech. Eng. 13(2), 3518–3539 (2016). doi:https://doi.org/10.15282/ijame.13.2.2016.18.0290CrossRef

15.

Chandel, R.S., Kumar, R., Kapoor, J.: Sustainability aspects of machining operations: A summary of concepts. Materials Today: Proceedings. doi: (2021). https://doi.org/10.1016/j.matpr.2021.04.624

16.

Gopalakannan, S., Senthilvelan, T.: A parametric study of electrical discharge machining process parameters on machining of cast Al/B4C metal matrix nanocomposites. Proc. Inst. Mech. Eng. Part. B J. Eng. Manuf. 227(7), 993–1004 (2013). doi:https://doi.org/10.1177/0954405413479505CrossRef

17.

Lee, S.W., Oh, Y.S.A., Study on Dry Electrical Discharge Machining Process:. In: 2008 International Conference on Smart Manufacturing Application, 9–11 April 2008 2008. pp 234–238. doi:https://doi.org/10.1109/ICSMA.2008.4505648

18.

Garg, R.K., Singh, K.K., Sachdeva, A., Sharma, V.S., Ojha, K., Singh, S.: Review of research work in sinking EDM and WEDM on metal matrix composite materials. Int. J. Adv. Manuf. Technol. 50(5–8), 611–624 (2010). doi:https://doi.org/10.1007/s00170-010-2534-5CrossRef

19.

Zadafiya, K., Dinbandhu, Kumari, S., Chattarjee, S., Abhishek, K.: Recent trends in non-traditional machining of shape memory alloys (SMAs): A review. CIRP J. Manuf. Sci. Technol. 32, 217–227 (2021). doi:https://doi.org/10.1016/j.cirpj.2021.01.003CrossRef

20.

Zhu, Z., Guo, D., Xu, J., Lin, J., Lei, J., Xu, B., Wu, X., Wang, X.: Processing characteristics of micro electrical discharge machining for surface modification of TiNi shape memory alloys using a TiC powder dielectric. Micromachines. 11(11), 1–15 (2020). doi:https://doi.org/10.3390/mi11111018CrossRef

21.

Chaudhari, R., Vora, J., Parikh, D.M., Wankhede, V., Khanna, S.: Multi-response Optimization of WEDM Parameters Using an Integrated Approach of RSM–GRA Analysis for Pure Titanium. J. Inst. Eng. Ser. D. 101(1), 117–126 (2020). doi:https://doi.org/10.1007/s40033-020-00204-7CrossRef

22.

Sharma, N., Singh, G., Gupta, M., Hegab, H., Mia, M.: Investigations of surface integrity, bio-activity and performance characteristics during wire-electrical discharge machining of Ti-6Al-7Nb biomedical alloy. Mater. Res. Express. 6(9) (2019). doi:https://doi.org/10.1088/2053-1591/ab3094

23.

Roy, B.K., Mandal, A.: Surface integrity analysis of Nitinol-60 shape memory alloy in WEDM. Mater. Manuf. Process. 34(10), 1091–1102 (2019). doi:https://doi.org/10.1080/10426914.2019.1628256CrossRef

24.

Mahajan, A., Sidhu, S.S.: Enhancing biocompatibility of Co-Cr alloy implants via electrical discharge process. Mater. Technol. 33(8), 524–531 (2018). doi:https://doi.org/10.1080/10667857.2018.1475144CrossRef

25.

Devarajaiah, D., Muthumari, C.: Evaluation of power consumption and MRR in WEDM of Ti–6Al–4V alloy and its simultaneous optimization for sustainable production. J. Brazilian Soc. Mech. Sci. Eng. 40(8) (2018). doi:https://doi.org/10.1007/s40430-018-1318-y

26.

Radhakrishnan, P., Vijayaraghavan, L., Ramesh Babu, N.: Assessment of material removal capability with vibration-assisted wire electrical discharge machining. J. Manuf. Process. 26, 323–329 (2017). doi:https://doi.org/10.1016/j.jmapro.2017.03.002CrossRef

27.

Ou, S.F., Wang, C.Y.: Effects of bioceramic particles in dielectric of powder-mixed electrical discharge machining on machining and surface characteristics of titanium alloys. J. Mater. Process. Technol. 245, 70–79 (2017). doi:https://doi.org/10.1016/j.jmatprotec.2017.02.018CrossRef

28.

Li, L., Zhao, L., Li, Z.Y., Feng, L., Bai, X.: Surface characteristics of Ti-6Al-4V by SiC abrasive-mixed EDM with magnetic stirring. Mater. Manuf. Process. 32(1), 83–86 (2017). doi:https://doi.org/10.1080/10426914.2016.1151043CrossRef

29.

Sales, W.F., Oliveira, A.R.F., Raslan, A.A.: Titanium perovskite (CaTiO3) formation in Ti6Al4V alloy using the electrical discharge machining process for biomedical applications. Surf. Coat. Technol. 307, 1011–1015 (2016). doi:https://doi.org/10.1016/j.surfcoat.2016.10.028CrossRef

30.

Ekmekci, N., Ekmekci, B.: Electrical Discharge Machining of Ti6Al4V in Hydroxyapatite Powder Mixed Dielectric Liquid. Mater. Manuf. Process. 31(13), 1663–1670 (2016). doi:https://doi.org/10.1080/10426914.2015.1090591CrossRef

31.

Huang, T.S., Hsieh, S.F., Chen, S.L., Lin, M.H., Ou, S.F., Chang, W.T.: Surface modification of TiNi-based shape memory alloys by dry electrical discharge machining. J. Mater. Process. Technol. 221, 279–284 (2015). doi:https://doi.org/10.1016/j.jmatprotec.2015.02.025CrossRef

32.

Jose, J.V., Shunmugam, M.S.: Investigation into white layer formed on wire electrical discharge machined Ti6Al4V surface. Int. J. Mach. Mach. Mater. 6(3–4), 234–249 (2009). doi:https://doi.org/10.1504/IJMMM.2009.027326CrossRef

33.

Prakash, C., Senthil, P., Manikandan, N., Palanisamy, D.: Investigations on machinability characteristics of Cast Aluminum Alloy based (LM 26 + Graphite + Fly ash) Hybrid Metal Matrix Composites for automobile components. Mater. Manuf. Process. 37(7), 748–763 (2022). doi:https://doi.org/10.1080/10426914.2021.1962531CrossRef

34.

Nair, H., Pramanik, A., Basak, A.K., Prakash, C., Debnath, S., Shankar, S., Dixit, A.R.: Experimental investigation on material removal rate, kerf width, surface roughness and the dimensional accuracy the accuracy of hole in Inconel 718 using wire electric discharge. Proc. Inst. Mech. Eng. Part. E J. Process. Mech. Eng. (2022). doi:https://doi.org/10.1177/09544089221096025CrossRef

35.

Walia, A.S., Srivastava, V., Garg, M., Somani, N., Gupta, N.K., Prakash, C., Bhargava, C., Kotecha, K.: Surface roughness analysis of H13 steel during electrical discharge machining process using Cu–TiC sintered electrode. Materials. 14(20) (2021). doi:https://doi.org/10.3390/ma14205943

36.

Sharma, A., Kumar, V., Babbar, A., Dhawan, V., Kotecha, K., Prakash, C.: Experimental investigation and optimization of electric discharge machining process parameters using grey-fuzzy-based hybrid techniques. Materials. 14(19) (2021). doi:https://doi.org/10.3390/ma14195820

37.

Pramanik, A., Basak, A.K., Prakash, C., Shankar, S., Sharma, S., Narendranath, S.: Recast Layer Formation during Wire Electrical Discharge Machining of Titanium (Ti-Al6-V4) Alloy. J. Mater. Eng. Perform. 30(12), 8926–8935 (2021). doi:https://doi.org/10.1007/s11665-021-06116-1CrossRef

38.

Prakash, C., Singh, S., Wu, L.Y., Zheng, H.Y., Królczyk, G.: Functional grading of surfaces through hybrid ultrasonic, abrasive water jet, and electric discharge machining processing. J. Brazilian Soc. Mech. Sci. Eng. 43(4) (2021). doi:https://doi.org/10.1007/s40430-021-02931-8

39.

Gupta, N.K., Somani, N., Prakash, C., Singh, R., Walia, A.S., Singh, S., Pruncu, C.I.: Revealing the WEDM process parameters for the machining of pure and heat-treated titanium (Ti-6Al-4V) alloy. Materials. 14(9) (2021). doi:https://doi.org/10.3390/ma14092292

40.

Basak, A., Pramanik, A., Prakash, C., Kotecha, K.: Micro-mechanical characterization of superficial layer synthesized by electric discharge machining process. Mater. Lett. 305 (2021). doi:https://doi.org/10.1016/j.matlet.2021.130769

41.

Kumar, A., Grover, N., Manna, A., Chohan, J.S., Kumar, R., Singh, S., Prakash, C., Pruncu, C.I.: Investigating the influence of wedm process parameters in machining of hybrid aluminum composites. Adv. Compos. Lett. 29, 1–14 (2020). doi:https://doi.org/10.1177/2633366x20963137CrossRef

42.

Antil, P., Kumar Antil, S., Prakash, C., Królczyk, G., Pruncu, C.: Multi-objective optimization of drilling parameters for orthopaedic implants. Meas. Control. 53(9–10), 1902–1910 (2020). doi:https://doi.org/10.1177/0020294020947126CrossRef

43.

Pramanik, A., Islam, M.N., Basak, A.K., Dong, Y., Littlefair, G., Prakash, C.: Optimizing dimensional accuracy of titanium alloy features produced by wire electrical discharge machining. Mater. Manuf. Process. 34(10), 1083–1090 (2019). doi:https://doi.org/10.1080/10426914.2019.1628259CrossRef

44.

Prakash, C., Singh, S., Singh, M., Verma, K., Chaudhary, B., Singh, S.: Multi-objective particle swarm optimization of EDM parameters to deposit HA-coating on biodegradable Mg-alloy. Vacuum. 158, 180–190 (2018). doi:https://doi.org/10.1016/j.vacuum.2018.09.050CrossRef

45.

Prakash, C., Singh, S., Pabla, B.S., Uddin, M.S.: Synthesis, characterization, corrosion and bioactivity investigation of nano-HA coating deposited on biodegradable Mg-Zn-Mn alloy. Surf. Coat. Technol. 346, 9–18 (2018). doi:https://doi.org/10.1016/j.surfcoat.2018.04.035CrossRef

46.

Vakharia, V., Vora, J., Khanna, S., Chaudhari, R., Shah, M., Pimenov, D.Y., Giasin, K., Prajapati, P., Wojciechowski, S.: Experimental investigations and prediction of WEDMed surface of nitinol SMA using SinGAN and DenseNet deep learning model. J. Mater. Res. Technol. 18, 325–337 (2022). doi:https://doi.org/10.1016/j.jmrt.2022.02.093CrossRef

47.

Hou, Y., Xu, J., Lian, Z., Zhai, C., Li, M., Yang, S., Yu, H.: Research on surface microstructures and properties of NiTi shape memory alloy after wire electrical discharge machining. Mater. Today Commun. 31 (2022). doi:https://doi.org/10.1016/j.mtcomm.2022.103521

48.

Singh, S.K., Mali, H.S., Unune, D.R., Abdul-Rani, A.M., Wojciechowski, S.: Material independent effectiveness of workpiece vibration in µ-EDM drilling. J. Mater. Res. Technol. 18, 531–546 (2022). doi:https://doi.org/10.1016/j.jmrt.2022.02.063CrossRef

49.

Serruys, P.W., Kutryk, M.J.B., Ong, A.T.L.: Coronary-Artery Stents. N. Engl. J. Med. 354(5), 483–495 (2006). doi:https://doi.org/10.1056/NEJMra051091CrossRef

50.

Erne, P., Schier, M., Resink, T.J.: The Road to Bioabsorbable Stents: Reaching Clinical Reality? Cardiovasc. Interv. Radiol. 29(1), 11–16 (2006). doi:https://doi.org/10.1007/s00270-004-0341-9CrossRef

51.

Kumar, R., Kaur, S.: Biocompatible and Bioactive Ceramics for Biomedical Applications: Content Analysis. In: Additive Manufacturing of Polymers for Tissue Engineering.CRC Press, pp61–78

52.

Grigoriev, S.N., Hamdy, K., Volosova, M.A., Okunkova, A.A., Fedorov, S.V.: Electrical discharge machining of oxide and nitride ceramics: A review. Mater. Des. 209. (2021). doi:https://doi.org/10.1016/j.matdes.2021.109965CrossRef

53.

Xie, B., Liu, L., Ji, X., Wang, Y., Zeng, Z., Gou, H., Zhang, B.: Recent Patents on a Discharge State Detection of EDM. Recent. Pat. Eng. 15(6) (2021). doi:https://doi.org/10.2174/1872212115666210712105718

54.

Ma, J., Yuan, J., Ming, W., He, W., Zhang, G., Zhang, H., Cao, Y., Jiang, Z.: Non-traditional processing of carbon nanotubes: A review. Alexandria Eng. J. 61(1), 597–617 (2022). doi:https://doi.org/10.1016/j.aej.2021.06.041CrossRef

55.

Sun, Y., Jin, L., Liu, M., Gong, Y., Wen, X., Yin, G., Wen, Q.: A comprehensive review on fabrication of ultra small micro tools via electrical discharge machining-based methods. Int. J. Adv. Manuf. Technol. 118(3–4), 703–735 (2022). doi:https://doi.org/10.1007/s00170-021-07976-6CrossRef

56.

Rajaguru, J., Kumar, P., Arunachalam, N.: Novel carbon nanotubes reinforced copper composite electrode for improved performance of electric discharge machining. Mater. Lett. 307 (2022). doi:https://doi.org/10.1016/j.matlet.2021.131063

57.

Ming, W., Zhang, S., Zhang, G., Du, J., Ma, J., He, W., Cao, C., Liu, K.: Progress in modeling of electrical discharge machining process. Int. J. Heat. Mass. Transf. 187 (2022). doi:https://doi.org/10.1016/j.ijheatmasstransfer.2022.122563

58.

Puertas, I., Luis, C.J.: A study of optimization of machining parameters for electrical discharge machining of boron carbide. Mater. Manuf. Process. 19(6), 1041–1070 (2004). doi:https://doi.org/10.1081/AMP-200035200CrossRef

59.

Aspinwall, D.K., Soo, S.L., Berrisford, A.E., Walder, G.: Workpiece surface roughness and integrity after WEDM of Ti-6Al-4V and Inconel 718 using minimum damage generator technology. CIRP Ann. Manuf. Technol. 57(1), 187–190 (2008). doi:https://doi.org/10.1016/j.cirp.2008.03.054CrossRef

60.

Kumar, S., Singh, R., Singh, T.P., Sethi, B.L.: Surface modification by electrical discharge machining: A review. J. Mater. Process. Technol. 209(8), 3675–3687 (2009). doi:https://doi.org/10.1016/j.jmatprotec.2008.09.032CrossRef

61.

Beri, N., Maheshwari, S., Sharma, C., Kumar, A.: Technological advancement in electrical discharge machining with powder metallurgy processed electrodes: A review. Mater. Manuf. Process. 25(10), 1186–1197 (2010). doi:https://doi.org/10.1080/10426914.2010.512647CrossRef

62.

Kumar, A., Maheshwari, S., Sharma, C., Beri, N.: Research developments in additives mixed electrical discharge machining (AEDM): A state of art review. Mater. Manuf. Process. 25(10), 1166–1180 (2010). doi:https://doi.org/10.1080/10426914.2010.502954CrossRef

63.

Muthuramalingam, T., Mohan, B.: A review on influence of electrical process parameters in EDM process. Arch. Civ. Mech. Eng. 15(1), 87–94 (2015). doi:https://doi.org/10.1016/j.acme.2014.02.009CrossRef

64.

Devgan, S., Sidhu, S.S.: Evolution of surface modification trends in bone related biomaterials: A review. Mater. Chem. Phys. 233, 68–78 (2019). doi:https://doi.org/10.1016/j.matchemphys.2019.05.039CrossRef

65.

Joshi, A.Y., Joshi, A.Y.: A systematic review on powder mixed electrical discharge machining. Heliyon. 5(12) (2019). doi:https://doi.org/10.1016/j.heliyon.2019.e02963

66.

Maity, K.P., Choubey, M.: A review on vibration-assisted EDM, micro-EDM and WEDM. Surf. Rev. Lett. 26(5) (2019). doi:https://doi.org/10.1142/S0218625X18300083

67.

Kumar, S.S., Varol, T., Canakci, A., Kumaran, S.T., Uthayakumar, M.: A review on the performance of the materials by surface modification through EDM. Int. J. Lightweight Mater. Manuf. 4(1), 127–144 (2021). doi:https://doi.org/10.1016/j.ijlmm.2020.08.002CrossRef

68.

Aspinwall, D.K., Dewes, R.C., Lee, H.G., Simao, J.: Electrical discharge surface alloying of Ti and Fe workpiece materials using refractory powder compact electrodes and Cu wire. CIRP Ann. Manuf. Technol. 52(1), 151–156 (2003). doi:https://doi.org/10.1016/S0007-8506(07)60553-8CrossRef

69.

Donthu, N., Kumar, S., Mukherjee, D., Pandey, N., Lim, W.M.: How to conduct a bibliometric analysis: An overview and guidelines. J. Bus. Res. 133, 285–296 (2021). doi:https://doi.org/10.1016/j.jbusres.2021.04.070CrossRef

70.

Moral-Muñoz, J.A., Herrera-Viedma, E., Santisteban-Espejo, A., Cobo, M.J.: Software tools for conducting bibliometric analysis in science: An up-to-date review.Profesional de la Información29 (1) (2020)

71.

Kaur, S., Kumar, R., Kaur, R., Singh, S., Rani, S., Kaur, A.: Piezoelectric materials in sensors: Bibliometric and visualization analysis. Materials Today: Proceedings 65:3780–3786. doi: (2022). https://doi.org/10.1016/j.matpr.2022.06.484

72.

Kumar, R., Singh, S., Sidhu, A.S., Pruncu, C.I.: Bibliometric analysis of specific energy consumption (Sec) in machining operations: A sustainable response. Sustainability. 13(10) (2021). doi:https://doi.org/10.3390/su13105617

73.

Rani, S., Kumar, R.: Bibliometric review of actuators: Key automation technology in a smart city framework. Materials Today: Proceedings. doi: (2022). https://doi.org/10.1016/j.matpr.2021.12.469

74.

Kumar, R., Goel, P.: Exploring the Domain of Interpretive Structural Modelling (ISM) for Sustainable Future Panorama: A Bibliometric and Content Analysis. Arch. Comput. Methods Eng. (2021). doi:https://doi.org/10.1007/s11831-021-09675-7CrossRef

75.

van Eck, N.J., Waltman, L.: Software survey: VOSviewer, a computer program for bibliometric mapping. Scientometrics. 84, 523–538 (2010). doi:https://doi.org/10.1007/s11192-009-0146-3CrossRef

76.

Aria, M.: bibliometrix: An R-tool for comprehensive science mapping analysis. J. Informetrics. 11, 959–975 (2017). doi:https://doi.org/10.1016/j.joi.2017.08.007CrossRef

77.

van Eck, N.J., Waltman, L.: How to Normalize Cooccurrence Data? An Analysis of Some Well-Known Similarity Measures. JASIST. 60, 1635–1651 (2009). doi:https://doi.org/10.1002/asi.21075CrossRef

78.

Chandel, R.S., Sharma, S., Kaur, S., Singh, S., Kumar, R.: Smart watches: A review of evolution in bio-medical sector. Mater. Today Proc. 50, 1053–1066 (2021). doi:https://doi.org/10.1016/j.matpr.2021.07.460CrossRef

79.

Kumar, R., Singh, S., Sidhu, A.S., Pruncu, C.I.: Bibliometric Analysis of Specific Energy Consumption (SEC) in Machining Operations: A Sustainable Response. Sustainability. 13(10) (2021). doi:https://doi.org/10.3390/su13105617

80.

Sidhu, A.S., Singh, S., Kumar, R.: Bibliometric analysis of entropy weights method for multi-objective optimization in machining operations. Mater. Today Proc. 50, 1248–1255 (2021). doi:https://doi.org/10.1016/j.matpr.2021.08.132CrossRef

81.

Zhang, J., Yu, Q., Zheng, F., Long, C., Lu, Z., Duan, Z.: Comparing keywords plus of WOS and author keywords: A case study of patient adherence research. J. Association Inform. Sci. Technol. 67 (2015). doi:https://doi.org/10.1002/asi.23437

82.

Kumar, R., Rani, S., Awadh, M.A.: Exploring the Application Sphere of the Internet of Things in Industry 4.0: A Review, Bibliometric and Content Analysis. Sensors. 22(11), 4276 (2022)CrossRef

83.

Van Eck, N.J.W.: Text mining and visualization using VOSviewer. ISSI Newsl. 7(3), 50–54 (2011). https://arxiv.org/ftp/arxiv/papers/1109/1109.2058.pdf

84.

Kumar, R., Bilga, P.S., Singh, S.: An Investigation of Energy Efficiency in Finish Turning of en 353 Alloy Steel. In: Sangwan KS, Herrmann C (eds) 28th CIRP Conference on Life Cycle Engineering, LCE 2021, 2021. Elsevier B.V., pp 654–659. doi:https://doi.org/10.1016/j.procir.2021.01.170

85.

Banga, H.K., Kalra, P., Kumar, R., Singh, S., Pruncu, C.I.: Optimization of the Cycle Time of Robotics Resistance Spot Welding for Automotive Applications. J. Adv. Manuf. Process. n/a (n/a). e10084 (2021). doi:https://doi.org/10.1002/amp2.10084

86.

Singh, S., Kumar, R., Kumar, R., Chohan, J.S., Ranjan, N., Kumar, R.: Aluminum metal composites primed by fused deposition modeling-assisted investment casting: Hardness, surface, wear, and dimensional properties. Proc. Inst. Mech. Eng. Part. L J. Mat. Des. Appl. 236(3), 674–691 (2022). doi:https://doi.org/10.1177/14644207211054143CrossRef

87.

Kumar, R., Kaur, S.: Multi Attribute Decision Making Approach to Select Microwave Oven with TOPSIS Method. Paper presented at the 7th International Conference on Advancements in Engineering and Technology (ICAET-2019), Bhai Gurdas Institute of Engineering & Technology, Sangrur, Punjab, India, (2019)

88.

Kumar, R., Singh, S., Aggarwal, V., Singh, S., Pimenov, D.Y., Giasin, K., Nadolny, K.: Hand and Abrasive Flow Polished Tungsten Carbide Die: Optimization of Surface Roughness, Polishing Time and Comparative Analysis in Wire Drawing. Materials. 15(4) (2022). doi:https://doi.org/10.3390/ma15041287

89.

Sidhu, R.S., Kumar, R., Kumar, R., Goel, P., Singh, S., Pimenov, D.Y., Giasin, K., Adamczuk, K.: Joining of Dissimilar Al and Mg Metal Alloys by Friction Stir Welding. Materials. 15(17) (2022). doi:https://doi.org/10.3390/ma15175901

90.

Sidhu, A.S., Singh, S., Kumar, R., Pimenov, D.Y., Giasin, K.: Prioritizing energy-intensive machining operations and gauging the influence of electric parameters: An industrial case study. Energies. 14(16) (2021). doi:https://doi.org/10.3390/en14164761

91.

Trzepieciński, T., Najm, S.M., Lemu, H.G.: Current Concepts for Cutting Metal-Based and Polymer-Based Composite Materials. J. Compos. Sci. 6(5) (2022). doi:https://doi.org/10.3390/jcs6050150

92.

Maurya, S.K., Susheel, C.K., Manna, A.: Experimental investigation of wire EDM parameters during machining of fabricated hybrid Al/(SiC + ZrO2 + NiTi)-MMC. Adv. Mat. Proc. Tech. (2022). doi:https://doi.org/10.1080/2374068X.2022.2109684CrossRef

93.

Channi, A.S., Bains, H.S., Grewal, J.S., Chidambaranthan, V.S., Kumar, R.: Tool wear rate during electrical discharge machining for aluminium metal matrix composite prepared by squeeze casting:A prospect as a biomaterial

94.

Daud, N.D., Hasan, M.N., Saleh, T., Leow, P.L., Mohamed Ali, M.S.: Non-traditional machining techniques for silicon wafers. Int. J. Adv. Manuf. Technol. 121(1–2), 29–57 (2022). doi:https://doi.org/10.1007/s00170-022-09365-zCrossRef

95.

Zhong, Z.W.: Processes for environmentally friendly and/or cost-effective manufacturing. Mater. Manuf. Process. 36(9), 987–1009 (2021). doi:https://doi.org/10.1080/10426914.2021.1885709CrossRef

96.

Prakash, C., Kansal, H.K., Pabla, B.S., Puri, S.: Processing and Characterization of Novel Biomimetic Nanoporous Bioceramic Surface on β-Ti Implant by Powder Mixed Electric Discharge Machining. J. Mater. Eng. Perform. 24(9), 3622–3633 (2015). doi:https://doi.org/10.1007/s11665-015-1619-6CrossRef

97.

Singh, N.K., Singh, S., Patel, B., Upadhyay, R.K.: Improvement of process performance of powder mixed electrical discharge machining by optimisation -A Review. Adv. Mat. Proc. Tech. (2021). doi:https://doi.org/10.1080/2374068X.2021.1945300CrossRef

98.

Sagbas, A., Gürtuna, F., Polat, U.: Comparison of ANN and RSM modeling approaches for WEDM process optimization. Materialpruefung. 63(4), 386–392 (2021)

99.

Prakash, C., Kansal, H.K., Pabla, B.S., Puri, S., Aggarwal, A.: Electric discharge machining - A potential choice for surface modification of metallic implants for orthopedic applications: A review. Proc. Inst. Mech. Eng. Part. B J. Eng. Manuf. 230(2), 331–353 (2016). doi:https://doi.org/10.1177/0954405415579113CrossRef

100.

Prakash, C., Kansal, H.K., Pabla, B.S., Puri, S.: To optimize the surface roughness and microhardness of β-Ti alloy in PMEDM process using Non-dominated Sorting Genetic Algorithm-II. In: 2nd International Conference on Recent Advances in Engineering and Computational Sciences, RAECS 2015, 2016. Institute of Electrical and Electronics Engineers Inc. doi:https://doi.org/10.1109/RAECS.2015.7453288

101.

Micallef, C., Zhuk, Y., Aria, A.I.: Recent progress in precision machining and surface finishing of tungsten carbide hard composite coatings. Coatings. 10(8) (2020). doi:https://doi.org/10.3390/COATINGS10080731

102.

Li, J., Laghari, R.A.: A review on machining and optimization of particle-reinforced metal matrix composites. Int. J. Adv. Manuf. Technol. 100(9–12), 2929–2943 (2019). doi:https://doi.org/10.1007/s00170-018-2837-5CrossRef

103.

Prakash, C., Kansal, H.K., Pabla, B.S., Puri, S.: Multi-objective optimization of powder mixed electric discharge machining parameters for fabrication of biocompatible layer on β-Ti alloy using NSGA-II coupled with Taguchi based response surface methodology. J. Mech. Sci. Technol. 30(9), 4195–4204 (2016). doi:https://doi.org/10.1007/s12206-016-0831-0CrossRef

104.

Prakash, C., Kansal, H.K., Pabla, B.S., Puri, S.: Effect of surface nano-porosities fabricated by powder mixed electric discharge machining on bone-implant interface: An experimental and finite element study. Nanosci. Nanatechnol. Lett. 8(10), 815–826 (2016). doi:https://doi.org/10.1166/nnl.2016.2255CrossRef

105.

Venkatesh, V., Swain, N., Srinivas, G., Kumar, P., Barshilia, H.C.: Review on the machining characteristics and research prospects of conventional microscale machining operations. Mater. Manuf. Process. 32(3), 235–262 (2017). doi:https://doi.org/10.1080/10426914.2016.1151045CrossRef

106.

Kapoor, J., Singh, S., Khamba, J.S.: High-performance wire electrodes for wire electrical-discharge machining - A review. Proc. Inst. Mech. Eng. Part. B J. Eng. Manuf. 226(11), 1757–1773 (2012). doi:https://doi.org/10.1177/0954405412460354CrossRef

107.

Prakash, C., Kansal, H.K., Pabla, B.S., Puri, S.: Powder Mixed Electric Discharge Machining: An Innovative Surface Modification Technique to Enhance Fatigue Performance and Bioactivity of β-Ti Implant for Orthopedics Application. J. Comput. Inf. Sci. Eng. 16(4) (2016). doi:https://doi.org/10.1115/1.4033901

108.

Aliyu, A.A., Abdul-Rani, A.M., Ginta, T.L., Prakash, C., Axinte, E., Razak, M.A., Ali, S.: A Review of Additive Mixed-Electric Discharge Machining: Current Status and Future Perspectives for Surface Modification of Biomedical Implants. Adv Mater Sci Eng 2017. doi: (2017). https://doi.org/10.1155/2017/8723239

109.

Prakash, C., Kansal, H.K., Pabla, B.S., Puri, S.: Experimental investigations in powder mixed electric discharge machining of Ti–35Nb–7Ta–5Zrβ-titanium alloy. Mater. Manuf. Process. 32(3), 274–285 (2017). doi:https://doi.org/10.1080/10426914.2016.1198018CrossRef

110.

Prakash, C., Uddin, M.S.: Surface modification of β-phase Ti implant by hydroaxyapatite mixed electric discharge machining to enhance the corrosion resistance and in-vitro bioactivity. Surf. Coat. Technol. 326, 134–145 (2017). doi:https://doi.org/10.1016/j.surfcoat.2017.07.040CrossRef

Titel: Exploring the application sphere of electrical discharge machining in composite materials considering surface features: a content analysis
verfasst von: Arvinder Singh Channi
Harminder Singh Bains
Jasmaninder Singh Grewal
Raman Kumar
Dharam Buddhi
Publikationsdatum: 26.10.2022
Verlag: Springer Paris
Erschienen in: International Journal on Interactive Design and Manufacturing (IJIDeM) / Ausgabe 5/2023
Print ISSN: 1955-2513
Elektronische ISSN: 1955-2505
DOI: https://doi.org/10.1007/s12008-022-01060-3

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Weitere Artikel der Ausgabe 5/2023

Optimization of wear behavior of straw combine blade through RSM and ANN models

Innovative study of electro chemical discharge drilling of silica based BK7 optical glass

Modelling and simulation of lightweight hollow pins as a substitution for solid shear pins used for assembly joints in aerospace applications

Optimization of gate valve structure based on strength parameters using finite element analysis

Effects of temperature, die angle and number of passes on the extrusion of 6063 aluminium alloy: experimental and numerical study

Computational model on influence of prestress level on vehicle-bridge coupled vibrations

Premium Partner