nach oben

Journal of Materials Engineering and Performance

Erschienen in:

14.12.2022 | Technical Article

Fabrication and Characterization of Al₂O₃ Particles Reinforced Ni-P-Polytetrafluoroethylene Nanocomposite Coating by Jet Electrodeposition

verfasst von: Long Zheng, Yongfeng Li, Mengyu Liu, Yixin Wang, Bin Sun, Chenming Zhang, Haoyuan Leng

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 18/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In order to achieve the purpose of material surface strengthening and protection, Ni-P-Al₂O₃-PTFE nanocomposite coatings were prepared by jet electrodeposition, and the effect of Al₂O₃ nanoparticle concentration in the plating solution on the microstructure and mechanical properties of the composite coatings was investigated. The surface morphology, microstructure, wear resistance and elastoplasticity of the composite coatings were characterized by x-ray diffractometer, scanning electron microscope, energy-dispersive spectrometer, friction and wear tester and nanoindenter. The experimental results show that the deposition of Al₂O₃ nanoparticles can significantly improve the comprehensive properties of the composite coating. When the addition amount of Al₂O₃ sol in the plating solution is 40 ml/L, the surface morphology of the composite coating is uniform and dense, the content of Al and F elements reaches the maximum value of 1.49 and 0.77 wt.%, the average friction coefficient and wear scar width reach the minimum value of 0.1456 and 131.40 μm, and the elastic recovery ratio (h_e/h_max) reaches the maximum value of 0.32. At this time, the nanocomposite coating exhibits excellent wear resistance and toughness. The development of this research will have a positive effect in the field of preparation and optimization of nanocomposite coatings.

Vorheriger Artikel Effect of Rolling Process on Formability and Mechanical Properties of AA 1050/Mg AZ31B Bilayer Sheet

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

S. Roy, B.M. Mishra, and G.K. Bose, Characterization of Ni-P Based Poly-Alloy and Composite Coatings Involving Nanoindentation and Nanoscratch Tests, Mater. Today Commun., 2021, 29, p 102991. https://doi.org/10.1016/j.mtcomm.2021.102991CrossRef

A.P. Meshram, M.K. Punith Kumar, and C. Srivastava, Enhancement in Anti-Corrosive Behavior of Ni-P Coatings by Incorporation of Carbon Nanotubes, J. Mater. Eng. Perform., 2021, 31, p 1573–1584. https://doi.org/10.1007/s11665-021-06260-8CrossRef

T. Rabizadeh, S.R. Allahkaram, and A. Zarebidaki, An Investigation on Effects of Heat Treatment on Corrosion Properties of Ni-P Electroless Nano-Coatings, Mater. Design, 2010, 31, p 3174–3179. https://doi.org/10.1016/j.matdes.2010.02.027CrossRef

S. Sharma, S. Sharma, A. Sharma, and V. Agarwala, Co-Deposition of Synthesized ZnO Nanoparticles into Ni-P Matrix Using Electroless Technique and Their Corrosion Study, J. Mater. Eng. Perform., 2016, 25, p 4383–4393. https://doi.org/10.1007/s11665-016-2292-0CrossRef

M. Rostami, A. Fahami, B. Nasiri-Tabrizi, R. Ebrahimi-Kahrizsangi, and A. Saatchi, Characterization of Electrodeposited Ni-SiC-Cg Nanocomposite Coating, Appl. Surf. Sci., 2013, 265, p 369–374. https://doi.org/10.1016/j.apsusc.2012.11.014CrossRef

C.M. Pacheco, B.A. Cecilia, G. Reyes, C. Oviedo, A. Fernández-Pérez, M. Elso, and O.J. Rojas, Nanocomposite Additive of SiO₂/TiO₂/Nanocellulose on Waterborne Coating Formulations for Mechanical and Aesthetic Properties Stability on Wood, Mater. Today Commun., 2021, 29, p 102990. https://doi.org/10.1016/j.mtcomm.2021.102990CrossRef

A. Kumar and A.K. Das, Correction to: Development of Al-Ni-TiC Composite Coating on Commercially Pure Al Using Tungsten Inert Gas Welding Route and its Wear Behavior, J. Mater. Eng. Perform., 2022, 31, p 5332. https://doi.org/10.1007/s11665-022-06801-9CrossRef

D.J. Liu, B.L. Jiang, Z. Liu, Y.F. Ge, and Y.M. Wang, Preparation and Catalytic Properties of Cu₂O-CoO/Al₂O₃ Composite Coating Prepared on Aluminum Plate by Microarc Oxidation, Ceram. Int., 2014, 40, p 9981–9987. https://doi.org/10.1016/j.ceramint.2014.02.096CrossRef

S.F. Shi, S. Cho, T. Goto, and T. Sekino, The Effects of Sintering Temperature on Mechanical and Electrical Properties of Al₂O₃/Ti Composites, Mater. Today Commun., 2020, 25, p 101522. https://doi.org/10.1016/j.mtcomm.2020.101522CrossRef

10.

S.A. Lajevardi, T. Shahrabi, and J.A. Szpunar, Tribological Properties of Functionally Graded Ni-Al₂O₃ Nanocomposite Coating, J. Electrochem. Soc., 2017, 164, p D275–D281. https://doi.org/10.1149/2.0731706jesCrossRef

11.

S. Aslan and E. Duru, Microstructure and Wear Properties of Electrodeposited Ni-B-Al₂O₃ Composite Coating on Low Carbon Steel at Elevated Temperature, J. Mater. Eng. Perform., 2022, 31, p 1693–1704. https://doi.org/10.1007/s11665-021-06290-2CrossRef

12.

S. Karthikeyan and B. Ramamoorthy, Effect of Reducing Agent and nano Al₂O₃ Particles on the Properties of Electroless Ni-P Coating, Appl. Surf. Sci., 2014, 307, p 654–660. https://doi.org/10.1016/j.apsusc.2014.04.092CrossRef

13.

X.Y. Wang, F. Liu, Y. Song, Z.K. Liu, and D. Qin, Structure and Properties of Al₂O₃ Coatings Formed on NiTi alloy by Cathodic Plasma Electrolytic Deposition-Science Direct, Surf. Coat. Tech., 2016, 285, p 128–133. https://doi.org/10.1016/j.surfcoat.2015.11.034CrossRef

14.

B.H. Park, M.H. Lee, B.K. Sang, and Y.M. Jo, Evaluation of the Surface Properties of PTFE Foam Coating Filter Media Using XPS and Contact Angle Measurements, Appl. Surf. Sci., 2011, 257, p 3709–3716. https://doi.org/10.1016/j.apsusc.2010.11.116CrossRef

15.

H.Y. Wang, L. Yan, D. Gao, D.J. Liu, C. Wang, L.Y. Sun, and Y.J. Zhu, Tribological Properties of Superamphiphobic PPS/PTFE Composite Coating in the Oilfield Produced Water, Wear, 2014, 319, p 62–68. https://doi.org/10.1016/j.wear.2014.07.012CrossRef

16.

E. Mortezanejad, M. Atapour, H. Salimijazi, A. Alhaji, and A. Hakimizad, Wear and Corrosion Behavior Of Aluminate-and Phosphate-Based Plasma Electrolytic Oxidation Coatings with Polytetrafluoroethylene Nanoparticles on AZ80 Mg Alloy, J. Mater. Eng. Perform., 2021, 30, p 4030–4044. https://doi.org/10.1007/s11665-021-05803-3CrossRef

17.

H.H. Sheu, S.Y. Jian, M.H. Lin, C. Hsu, K.H. Hou, and M.D. Ger, Electroless Ni-P/PTFE Self-Lubricating Composite thin Films Applied for Medium-Carbon Steel Substrate, Int. J. Electrochem. Sc., 2017, 12, p 5464–5482. https://doi.org/10.20964/2017.06.30CrossRef

18.

N. Jiang and C.Q. Fu, Research on the Microstructure and Tribological Properties of the Electroless Ni-P-PTFE Composite Repairing Coating on Gears, Appl. Mech. Mater., 2013, 327, p 136–139. https://doi.org/10.4028/www.scientific.net/AMM.327.136CrossRef

19.

T.C. Chen, S.R. Ge, H.T. Liu, Q.H. Sun, W. Zhu, W. Yan, and J.W. Qi, Fabrication of Low Adhesive Superhydrophobic Surfaces Using Nano Cu/Al₂O₃ Ni-Cr Composited Electro-Brush Plating, Appl. Surf. Sci., 2015, 356, p 81–90. https://doi.org/10.1016/j.apsusc.2015.08.045CrossRef

20.

Y.K. Liu, Q.L. Lu, Z. Huang, S.Q. Sun, B. Yu, U. Evariste, and G.H. Jiang ang J.M. Yao, Electrodeposition of Ni-Co-S Nanosheet Arrays on N-Doped Porous Carbon Nanofibers for Flexible Asymmetric Supercapacitors, J. Alloy. Compd., 2018, 762, p 301–311. https://doi.org/10.1016/j.jallcom.2018.05.239CrossRef

21.

J.E. Park, Y.S. Jang, S.Y. Kim, J.B. Choi, T.S. Bae, I.S. Park, and M.H. Lee, Corrosion Properties and Biocompatibility of Strontium Doped Calcium Phosphate Coated Magnesium Prepared by Electrodeposition, Mater. Today Commun., 2022, 31, p 103759. https://doi.org/10.1016/j.mtcomm.2022.103759CrossRef

22.

M. Cao, X. Zhang, J. Ren, Y. Sun, and N. Dai, Chemical Bath Deposition of SnS:Cu/ZnS for Solar Hydrogen Production and Solar Cells, J. Alloy. Compd., 2012, 863, p 158727. https://doi.org/10.1016/j.jallcom.2021.158727CrossRef

23.

G.P. Sklar, K. Paramguru, M. Misra, and J.C. Lacombe, Pulsed Electrodeposition into AAO Templates for CVD Growth of Carbon Nanotube Arrays, Nanotechnology, 2015, 16, p 1265–1271. https://doi.org/10.1088/0957-4484/16/8/047CrossRef

24.

R. Levinas, N. Tsyntsaru, and H. Cesiulis, Insights into Electrodeposition and Catalytic Activity of MoS₂ for Hydrogen Evolution Reaction Electrocatalysis, Electrochim. Acta, 2019, 317, p 427–436. https://doi.org/10.1016/j.electacta.2019.06.002CrossRef

25.

R.V. Prataap and S. Mohan, Electrodeposition of Ni-La₂O₃ Composite on AA6061 Alloy and its Enhanced Hardness, Corrosion Resistance and Thermal Stability, Surf. Coat. Tech., 2017, 324, p 471–477. https://doi.org/10.1016/j.surfcoat.2017.06.011CrossRef

26.

A. Zoikis-Karathanasis, E.A. Pavlatou, and N. Spyrellis, Pulse Electrodeposition of Ni-P Matrix Composite Coatings Reinforced by SiC Particles, J. Alloy. Compd., 2010, 494, p 396–403. https://doi.org/10.1016/j.jallcom.2010.01.057CrossRef

27.

Y.B. Zhong, P.W. Zhou, J.F. Zhou, H. Wang, L.J. Fan, L.C. Dong, T.X. Zheng, and W.W. Shen, Study on the Pulse Reverse Electrodeposition of Fe-Nano-Si Composite Coatings in Magnetic Field, Appl. Surf. Sci., 2014, 309, p 278–284. https://doi.org/10.1016/j.apsusc.2014.05.030CrossRef

28.

M.K. Camargo, I. Tudela, U. Schmidt, A.J. Cobley, and A. Bund, Ultrasound Assisted Electrodeposition of Zn and Zn-TiO₂ Coatings, Electrochim. Acta, 2016, 198, p 287–295. https://doi.org/10.1016/j.electacta.2016.03.078CrossRef

29.

X.L. Chen, J.S. Chen, K.K. Saxena, J.J. Zhu, X.L. Gu, and Z.N. Guo, Localization of Jet Electrochemical Additive Manufacturing With a Liquid Confinement Technique, J. Manuf. Process., 2022, 81, p 48–64. https://doi.org/10.1016/j.jmapro.2022.06.053CrossRef

30.

W. Cui, K. Wang, F. Xia, and P. Wang, Simulation and Characterization of Ni-doped SiC Nanocoatings Prepared by Jet Electrodeposition, Ceram. Int., 2017, 44, p 5500–5505. https://doi.org/10.1016/j.ceramint.2017.12.189CrossRef

31.

C.Y. Li, F.F. Xia, C.Y. Ma, and Q. Li, Research on the Corrosion Behavior of Ni-SiC Nanocoating Prepared Using a Jet Electrodeposition Technique, J. Mater. Eng. Perform., 2021, 30, p 6336–6344. https://doi.org/10.1007/s11665-021-05891-1CrossRef

32.

H. Jin, R.J. Ji, T.C. Dong, S. Liu, Y.H. Liu, F. Zhang, C. Ma, and S.G. Liu, Fabrication and Characterization of WC Particles Reinforced Ni Fe Composite Coating By Jet Electrodeposition, Surf. Coat. Tech., 2021, 421, p 127368. https://doi.org/10.1016/j.surfcoat.2021.127368CrossRef

33.

W. Jiang, X. Li, Y.L. Chen, H.G. Li, L.D. Li, Y. Chen, Z.J. Tian, and Y.X. Lao, Research on the Wear and Corrosion Resistance of Ni-GO-TiC Composite Coating by Scanning Jet Electrodeposition, Surf. Topogr-Metrol., 2022, 10, p 015048. https://doi.org/10.1088/2051-672X/ac5c67CrossRef

34.

H. Fan, J. Jiang, Y.P. Zhao, S.K. Wang, and Z.J. Li, Improvement of Microstructure and Properties of Ni-Al₂O₃ Composite Coating Via Jet Electrodeposition, Int. J. Mod. Phys. B, 2020, 34, p 2050243. https://doi.org/10.1142/S0217979220502434CrossRef

35.

C.A. Huang, C.H. Shen, and P.Y. Li, Effect of Fabrication Parameters on Grinding Performances of Electroplated Ni-B-Diamond Tools with D150-Diamond Particles, J. Manuf. Process., 2022, 80, p 374–381. https://doi.org/10.1016/j.jmapro.2022.05.055CrossRef

36.

A.G. Tang, M.L. Wang, W. Huang, and X.L. Wang, Composition Design of Ni-Nano-Al₂O₃-PTFE Coatings and their Tribological Characteristics, Surf. Coat. Tech., 2015, 282, p 121–128. https://doi.org/10.1016/j.surfcoat.2015.10.034CrossRef

37.

N. Guglielmi, Kinetics of the Deposition of Inert Particles from Electrolytic Baths, J. Electrocheml. Soc., 1972, 119, p 1009–1012. https://doi.org/10.1149/1.2404383CrossRef

38.

M.M. Peng, L.Q. Wang, L. Guo, J.Y. Guo, L.P. Zheng, F.W. Yang, Z. Ma, and X. Zhao, A Durable Nano-SiO₂-TiO₂/Dodecyltrimethoxysilane Superhydrophobic Coating for Stone Protection, Coatings, 2022, 12, p 1397. https://doi.org/10.3390/coatings12101397CrossRef

39.

Y.K. Xu, M.Y. Fan, Y.Q. Luo, Y.N. Chen, J.M. Hao, and X.H. Hou, Tribology and Corrosion Properties Investigation of a Pulse Electrodeposition Duplex Hard-Particle-Reinforced Ni-Mo Nanocomposite Coating, Surf. Coat. Tech., 2020, 393, p 125797. https://doi.org/10.1016/j.surfcoat.2020.125797CrossRef

40.

J.I. Langford and A.J.C. Wilson, Scherrer After Sixty Years: a Survey and Some New Results in the Determination of Crystallite Size, J. Appl. Crystallogr., 2015, 11, p 102–113. https://doi.org/10.1063/1.4928401CrossRef

41.

A. Brenner and S. Senderoff, Electrodeposition of Alloys, J. Electrochem. Soc., 2011, 111, p 34C. https://doi.org/10.1149/1.2426105CrossRef

42.

W. Jiang, L.D. Shen, M.B. Qiu, X. Wang, M.Z. Fan, and Z.J. Tian, Preparation of Ni-SiC Composite Coatings by Magnetic Field-Enhanced Jet Electrodeposition, J. Alloy. Compd., 2018, 762, p 115–124. https://doi.org/10.1016/j.jallcom.2018.05.097CrossRef

43.

L. Chen, L.P. Wang, Z.X. Zeng, and T. Xu, Influence of Pulse Frequency on the Microstructure and Wear Resistance of Electrodeposited Ni-Al₂O₃ Composite Coatings, Surf. Coat. Tech., 2006, 201, p 599–605. https://doi.org/10.1016/j.surfcoat.2005.12.008CrossRef

44.

S. Das, S. Banthia, A. Patra, S. Sengupta, and S.B. Singh, Novel bilayer Zn-Ni/Ni-Co-SiC Nanocomposite Coating with Exceptional Corrosion and Wear Properties by Pulse Electrodeposition, J. Alloy. Compd., 2018, 738, p 394–404. https://doi.org/10.1016/j.jallcom.2017.12.093CrossRef

45.

Y.F. Li, Z.J. Yang, H.J. Han, M.Y. Liu, M.M. Zhang, Z.K. Wang, and T.T. Wu, Effects of Duty Ratio on Properties of Ni-P-(sol) Al₂O₃ Coating Prepared by Pulse-Assisted Chemical Deposition, J. Mater. Res. Technol., 2021, 15, p 924–935. https://doi.org/10.1016/j.jmrt.2021.08.077CrossRef

Titel: Fabrication and Characterization of Al2O3 Particles Reinforced Ni-P-Polytetrafluoroethylene Nanocomposite Coating by Jet Electrodeposition
verfasst von: Long Zheng
Yongfeng Li
Mengyu Liu
Yixin Wang
Bin Sun
Chenming Zhang
Haoyuan Leng
Publikationsdatum: 14.12.2022
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 18/2023
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-022-07739-8

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 18/2023

Rejuvenation and Malleability Enhancement of Zr-Based Metallic Glass by Sub-Tg Annealing and Cryogenic Thermal Cycle Treatment

Structure and Chemical State of Oxide Films Formed on Crystalline TiNi Alloy and Glassy Ti-Ni-Ta-Si Surface Alloy

Crystal Orientation Effect on the Irradiation Mechanical Properties and Deformation Mechanism of α-Fe: Molecular Dynamic Simulations

Tribological Characterization of Alumina Ceramic Manufactured by Solvent-Based Slurry Stereolithography

Corrosion Behavior of EN18 Steel and Copper in the Sulfuric Acid Medium for As-Bought and Annealed Materials

Effect of Secondary Welding Thermal Cycle Peak Temperature on Microstructure and Properties in Simulated Reheat Coarse Grain Heat Affected Zone of High Strength Medium-Mn Steel

Premium Partner

Marktübersichten