nach oben

Journal of Material Cycles and Waste Management

Erschienen in:

17.03.2022 | ORIGINAL ARTICLE

Fabrication and characterization of lightweight aggregate prepared from steel mill sludge in one step

verfasst von: Jianguo Hong, Zhuming Chen, Ying Huang, Yue Cao, Shuhua Geng, Yuwen Zhang, Xingli Zou, Xionggang Lu

Erschienen in: Journal of Material Cycles and Waste Management | Ausgabe 3/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The qualified green lightweight aggregate (LWA) was successfully prepared from steel mill sludge (SMS) and fly ash (FAS) in one step using the cost-effective sintering method. The effects of the ratio of FAS and SMS, sintering temperature, and sintering time on the performance of LWA were studied. The results show that the optimal LWA has bulk density of 721 kg m⁻³, compressive strength of 14.0 MPa, and water absorption of 12.6% under the follow optimized conditions: FAS and SMS mixed at a ratio of 8:2 at the sintering temperature of 1150 °C for 25 min. The mechanisms of mineralogical phases and microstructures formation were proposed. The microstructure of qualified LWA was characterized by a dense surface and a porous structure inside. The presence of mullite and anorthite phase can improve the strength of aggregate.

Vorheriger Artikel Scaled-up and economic assessment approach of the split-phase glycolysis process for the recycling of flexible polyurethane foam wastes

Nächster Artikel Long-term estimation of plastic material resources from end-of-life vehicles in China: a scenario analysis considering multiple industry standards

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Alloway BJ, Jackson AP (1991) The behaviour of heavy metals in sewage sludge-amended soils. Sci Total Environ 100:151–176. https://doi.org/10.1016/0048-9697(91)90377-QCrossRef

Verlicchi P, Aukidy MAL, Zambello E (2012) Occurrence of pharmaceutical compounds in urban wastewater: Removal, mass load and environmental risk after a secondary treatment—a review. Sci Total Environ 429:123–155. https://doi.org/10.1016/j.scitotenv.2012.04.028CrossRef

Appels L, Degrève J, Bruggen BVD, Impe JV, Dewil R (2010) Influence of low temperature thermal pre-treatment on sludge solubilisation, heavy metal release and anaerobic digestion. Bioresour Technol 101:5743–5748. https://doi.org/10.1016/j.biortech.2010.02.068CrossRef

Houillon G, Jolliet O (2005) Life cycle assessment of processes for the treatment of wastewater urban sludge: energy and global warming analysis. J Clean Prod 13:287–299. https://doi.org/10.1016/j.jclepro.2004.02.022CrossRef

Yang G, Zhang GM, Wang HC (2018) Current state of sludge production, management, treatment and disposal in China. Water Res 78:60–73. https://doi.org/10.1016/j.watres.2015.04.002CrossRef

Das B, Prakash S, Reddy PSR, Misra VN (2007) An overview of utilization of slag and sludge from steel industries. Resour Conserv Recy 50:40–57. https://doi.org/10.1016/j.resconrec.2006.05.008CrossRef

Gomez V, Wright K, Esquenazi GL, Barron AR (2019) Microwave treatment of a hot mill sludge from the steel industry: an route to recycling an industrial waste. J Clean Prod 207:182–189. https://doi.org/10.1016/j.jclepro.2018.08.294CrossRef

Mocellin J, Mercier G, Morel JL, Blais JF, Simonnot MO (2005) Factors influencing the Zn and Mn extraction from pyrometallurgical sludge in the steel manufacturing industry. J Environ Manage 158:48–54. https://doi.org/10.1016/j.jenvman.2015.04.039CrossRef

Malliou O, Katsioti M, Georgiadis A, Katsiri A (2007) Properties of stabilized/solidified admixtures of cement and sewage sludge. Cement Concrete Comp 29:55–61. https://doi.org/10.1016/j.cemconcomp.2006.08.005CrossRef

10.

Weng CH, Lin DF, Chiang PC (2003) Utilization of sludge as brick materials. Adv Environ Res 7:679–685. https://doi.org/10.1016/S1093-0191(02)00037-0CrossRef

11.

Mun KJ (2007) Development and tests of lightweight aggregate using sewage sludge for nonstructural concrete. Constr Build Mater 21:1583–1588. https://doi.org/10.1016/j.conbuildmat.2005.09.009CrossRef

12.

Lynn CJ, Dhir RK, Ghataora GS, West RP (2015) Sewage sludge ash characteristics and potential for use in concrete. Constr Build Mater 98:767–779. https://doi.org/10.1016/j.conbuildmat.2015.08.122CrossRef

13.

BS (2002) EN 13055. Part 1: Lightweight aggregates for concrete, mortar and grout. Lightweight Aggregates. British Standards Institution, London

14.

BS (2013) EN 206. Part 1: Specification, performance, production and conformity. Concrete. British Standards Institution, London

15.

Meyer C (2009) The greening of the concrete industry. Cement Concrete Comp 31:601–605. https://doi.org/10.1016/j.cemconcomp.2008.12.010CrossRef

16.

Li B, Ling TC, Qu L, Wang Y (2016) Effects of a two-step heating process on the properties of lightweight aggregate prepared with sewage sludge and saline clay. Constr Build Mater 114:119–126. https://doi.org/10.1016/j.conbuildmat.2016.03.159CrossRef

17.

Corrochano BG, Azcárate JA, Rodas M (2009) Characterization of lightweight aggregates manufactured from washing aggregate sludge and fly ash. Resour Conserv Recy 53:571–581. https://doi.org/10.1016/j.resconrec.2009.04.008CrossRef

18.

Corrochano BG, Azcárate JA, Rodríguez L, Lorenzo AP, Torío MF, Ramos JJT, Corvinos MD, Muro C (2016) Valorization of washing aggregate sludge and sewage sludge for lightweight aggregates production. Constr Build Mater 116:252–262. https://doi.org/10.1016/j.conbuildmat.2016.04.095CrossRef

19.

Cheeseman CR, Virdi GS (2005) Properties and microstructure of lightweight aggregate produced from sintered sewage sludge ash. Resour Conserv Recy 45:18–30. https://doi.org/10.1016/j.resconrec.2004.12.006CrossRef

20.

Tuan BLA, Hwang CL, Lin KL, Chen YY, Young MP (2013) Development of lightweight aggregate from sewage sludge and waste glass powder for concrete. Constr Build Mater 47:334–339. https://doi.org/10.1016/j.conbuildmat.2013.05.039CrossRef

21.

Lau PC, Teo DCL, Mannan MA (2017) Characteristics of lightweight aggregate produced from lime-treated sewage sludge and palm oil fuel ash. Constr Build Mater 152:558–567. https://doi.org/10.1016/j.conbuildmat.2017.07.022CrossRef

22.

Liu JZ, Li YS (2012) Preparation and microstructure of green ceramsite made from sewage sludge. J Wuhan Univ Technol 27: 149–153. http://www.cnki.com.cn/Article/CJFDTotal-WLGY201201031.htm

23.

Wang XR, Jin YY, Wang ZY, Nie YF, Huang QF, Wang Q (2009) Development of lightweight aggregate from dry sewage sludge and coal ash. Waste Manage 29:1330–1335. https://doi.org/10.1016/j.wasman.2008.09.006CrossRef

24.

Corrochano BG, Azcárate JA, Rodas M, Luque FJ, Barrenechea JF (2010) Microstructure and mineralogy of lightweight aggregates produced from washing aggregate sludge, fly ash and used motor oil. Cement Conc Comp 32:694–707. https://doi.org/10.1016/j.cemconcomp.2010.07.014CrossRef

25.

Baykal G, Döven AG (2000) Utilization of fly ash by pelletization process; theory, application areas and research results. Resour Conserv Recy 30:59–77. https://doi.org/10.1016/S0921-3449(00)00042-2CrossRef

26.

Thomas J, Harilal B (2016) Mechanical properties of cold bonded quarry dust aggregate concrete subjected to elevated temperature. Constr Build Mater 125:724–730. https://doi.org/10.1016/j.conbuildmat.2016.08.093CrossRef

27.

Gesoğlu M, Özturan T, Güneyisi E (2007) Effects of fly ash properties on characteristics of cold-bonded fly ash lightweight aggregates. Constr Build Mater 21:1869–1878. https://doi.org/10.1016/j.conbuildmat.2006.05.038CrossRef

28.

Hiramatsu Y, Oka Y (1966) Determination of the tensile strength of rock by a compression test of an irregular test piece. Int J Rock Mech Min 3:89–90. https://doi.org/10.1016/0148-9062(66)90002-7CrossRef

29.

Liu MW, Wang CZ, Bai Y, Xu G (2018) Effects of sintering temperature on the characteristics of lightweight aggregate made from sewage sludge and river sediment. J Alloy Compd 748:522–527. https://doi.org/10.1016/j.jallcom.2018.03.216CrossRef

30.

Ahmaruzzaman M (2010) A review on the utilization of fly ash. Prog Energ Combust 36:327–363. https://doi.org/10.1016/j.pecs.2009.11.003CrossRef

31.

Qi YF, Yue QY, Han SX, Yue M, Gao BY, Yu H, Shao T (2010) Preparation and mechanism of ultra-lightweight ceramics produced from sewage sludge. J Hazard Mater 176:76–84. https://doi.org/10.1016/j.jhazmat.2009.11.001CrossRef

32.

Park YJ, Moon SO, Heo J (2003) Crystalline phase control of glass ceramics obtained from sewage sludge fly ash. Ceram Int 29:223–227. https://doi.org/10.1016/S0272-8842(02)00109-8CrossRef

33.

Zhu P, Wang LY, Hong D, Qian GR, Zhou M (2012) A study of making synthetic oxy-fluoride construction material using waste serpentine and kaolin mining tailings. Int J Miner Process 104–105:31–36. https://doi.org/10.1016/j.minpro.2011.12.003CrossRef

34.

Franus M, Franus DB, Wdowin M (2016) Utilization of sewage sludge in the manufacture of lightweight aggregate. Environ Monit Assess 188:10. https://doi.org/10.1007/s10661-015-5010-8CrossRef

35.

Huang ZH, Huang SF, Leng XF, Sun HR, Fang MH, Liu YG (2009) Phase design of anorthite/mullite composite refractories. Rare Metal Mat Eng 38:1252–1254. https://doi.org/10.3321/j.issn:1002-185X.2009.z2.333CrossRef

36.

Forray FL, Drouet C, Navrotsky A (2004) Thermochemistry of yavapaiite KFe(SO₄)₂: formation and decomposition. Cosmochim Ac 69:2133–2140. https://doi.org/10.1016/j.gca.2004.10.018CrossRef

37.

Xu GR, Zou JL, Li GB (2008) Ceramsite made with water and wastewater sludge and its characteristics affected by SiO₂ and Al₂O₃. Environ Sci Technol 42:7417–7423. https://doi.org/10.1021/es801446hCrossRef

38.

Johari I, Said S, Hisham B, Bakar B, Ahmad ZA (2010) Effect of the change of firing temperature on microstructure and physical properties of clay bricks from Beruas (Malaysia). Sci Sinter 42:245–254. https://doi.org/10.2298/SOS1002245JCrossRef

Titel: Fabrication and characterization of lightweight aggregate prepared from steel mill sludge in one step
verfasst von: Jianguo Hong
Zhuming Chen
Ying Huang
Yue Cao
Shuhua Geng
Yuwen Zhang
Xingli Zou
Xionggang Lu
Publikationsdatum: 17.03.2022
Verlag: Springer Japan
Erschienen in: Journal of Material Cycles and Waste Management / Ausgabe 3/2022
Print ISSN: 1438-4957
Elektronische ISSN: 1611-8227
DOI: https://doi.org/10.1007/s10163-022-01385-x

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3/2022

The clayey quarry sludge from a waste to a valuable raw material for red ceramics

Correction to: Management of food waste in restaurants by way of circular practices

Influence of ferrochrome ash on mechanical and microstructure properties of ambient cured fly ash-based geopolymer concrete

Application of titania from Ti-Salt flocculated sludge for UHPC

Optimization of process parameters using response surface methodology for maximum liquid yield during thermal pyrolysis of blend of virgin and waste high-density polyethylene

Scaled-up and economic assessment approach of the split-phase glycolysis process for the recycling of flexible polyurethane foam wastes