nach oben

Journal of Material Cycles and Waste Management

Erschienen in:

11.03.2022 | ORIGINAL ARTICLE

The clayey quarry sludge from a waste to a valuable raw material for red ceramics

verfasst von: Rachida Bouachera, Rachida Kasimi, Mounsif Ibnoussina, Mariam El Aoud, Yassine Taha, Hicham El Boudour El Idrissi, Rachid Hakkou

Erschienen in: Journal of Material Cycles and Waste Management | Ausgabe 3/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This study aims to evaluate the reuse of clayey quarry sludge generated during the washing process of aggregates in crushing plants as a raw material in ceramic bricks production. The representative sludge samples were collected from three quarries (S, G, and B) in Marrakesh region (Morocco). Different analytical techniques were used to investigate their mineralogical, chemical and physical properties. Ceramic pastes were elaborated using binary formulations based on the incorporation of each sludge at 0, 25%, 50%, 75%, and 100% with the conventional clay then sintered at 1050 °C. The mineralogical changes that take place during the incorporation of sludge were followed using XRD. The obtained results showed that the incorporation of sludge does not change the mineralogy of the fired bricks while the vitrification intensity increases. The sludge S and G can be used, at 100%, as an efficient substitute raw material, with a compressive strength of 20 MPa and flexural strength of 12 MPa. The optimal compressive and flexural strength were noticed to be about 36 MPa and 17 MPa, respectively, after the incorporation of 50% of sludge S. The total substitution by S and G as raw material in bricks manufacturing can contribute to the achievement of circular economy goals.

Graphical abstract

Vorheriger Artikel Fly ash bricks development using concrete waste debris and self-healing bacteria

Nächster Artikel Scaled-up and economic assessment approach of the split-phase glycolysis process for the recycling of flexible polyurethane foam wastes

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Coronado ECM, Alonso NQR, Andrés SA (2019) Waelz slag—based construction ceramics: effect of the trial scale on technological and environmental properties. J Mater Cycles Waste Manag. https://doi.org/10.1007/s10163-019-00896-4CrossRef

Singh SK, Rekha P, Surya M (2020) Utilization of Linz-Donawitz slag from steel industry for waste minimization. J Mater Cycles Waste Manag 22:611–627. https://doi.org/10.1007/s10163-020-00981-zCrossRef

Taha Y, Benzaazoua M, Hakkou R, Mansori M (2017) Coal mine wastes recycling for coal recovery and eco-friendly bricks production. Miner Eng 107:123–138. https://doi.org/10.1016/J.MINENG.2016.09.001CrossRef

Loutou M, Taha Y, Benzaazoua M et al (2019) Valorization of clay by-product from moroccan phosphate mines for the production of fired bricks. J Clean Prod 229:169–179. https://doi.org/10.1016/j.jclepro.2019.05.003CrossRef

Taha Y, Benzaazoua M, Hakkou R, Mansori M (2016) Natural clay substitution by calamine processing wastes to manufacture fired bricks. J Clean Prod 135:847–858. https://doi.org/10.1016/j.jclepro.2016.06.200CrossRef

Taha Y, Benzaazoua M, Mansori M, Hakkou R (2017) Recycling feasibility of glass wastes and calamine processing tailings in fired bricks making. Waste Biomass Valoriz 8:1479–1489. https://doi.org/10.1007/s12649-016-9657-3CrossRef

Wang L, Sun H, Sun Z, Ma E (2016) New technology and application of brick making with coal fly ash. J Mater Cycles Waste Manag 18:763–770. https://doi.org/10.1007/s10163-015-0368-9CrossRef

Xu H, Song W, Cao W et al (2017) Utilization of coal gangue for the production of brick. J Mater Cycles Waste Manag 19:1270–1278. https://doi.org/10.1007/s10163-016-0521-0CrossRef

Du B, Zhou C, Duan N (2014) Recycling of electrolytic manganese solid waste in autoclaved bricks preparation in China. J Mater Cycles Waste Manag 16:258–269. https://doi.org/10.1007/s10163-013-0181-2CrossRef

10.

Quina MJ, Almeida MA, Santos R et al (2014) Compatibility analysis of municipal solid waste incineration residues and clay for producing lightweight aggregates. Appl Clay Sci 102:71–80. https://doi.org/10.1016/j.clay.2014.10.016CrossRef

11.

Hossain SS, Majhi LMMR (2018) Manufacturing of green building brick: recycling of waste for construction purpose. J Mater Cycles Waste Manag. https://doi.org/10.1007/s10163-018-0788-4CrossRef

12.

Ahmadi R, Souri B, Ebrahimi M (2020) Evaluation of wheat straw to insulate fired clay hollow bricks as a construction material. J Clean Prod 254:120043. https://doi.org/10.1016/j.jclepro.2020.120043CrossRef

13.

Ullah SMH, Hasan M, Ishtiaq S, Tanvir A (2020) Performance of industrial sludge—amended bricks manufactured in conventional kilns. J Mater Cycles Waste Manag. https://doi.org/10.1007/s10163-020-01080-9CrossRef

14.

Athira G, Bahurudeen A, Sahu PK et al (2020) Effective utilization of sugar industry waste in Indian construction sector: a geospatial approach. J Mater Cycles Waste Manag 22:724–736. https://doi.org/10.1007/s10163-019-00963-wCrossRef

15.

Luo DLH (2016) Characterizations of temperature effects on sintered ceramics manufactured with waste foundry sand and clay. J Mater Cycles Waste Manag. https://doi.org/10.1007/s10163-016-0553-5CrossRef

16.

Smol M, Kulczycka J, Henclik A et al (2015) The possible use of sewage sludge ash (SSA) in the construction industry as a way towards a circular economy. J Clean Prod 95:45–54. https://doi.org/10.1016/j.jclepro.2015.02.051CrossRef

17.

Girondi GD, Marvila MM, de Azevedo ARG et al (2020) Recycling potential of powdered cigarette waste in the development of ceramic materials. J Mater Cycles Waste Manag 22:1672–1681. https://doi.org/10.1007/s10163-020-01058-7CrossRef

18.

Martínez-García C, Eliche-Quesada D, Pérez-Villarejo L et al (2012) Sludge valorization from wastewater treatment plant to its application on the ceramic industry. J Environ Manage 95:S343–S348. https://doi.org/10.1016/j.jenvman.2011.06.016CrossRef

19.

Teixeira SR, Santos GTA, Souza AE et al (2011) The effect of incorporation of a Brazilian water treatment plant sludge on the properties of ceramic materials. Appl Clay Sci 53:561–565. https://doi.org/10.1016/j.clay.2011.05.004CrossRef

20.

Yaras A, Sutcu M, Gencel O, Erdogmus E (2019) Use of carbonation sludge in clay based building materials processing for eco-friendly, lightweight and thermal insulation. Constr Build Mater 224:57–65. https://doi.org/10.1016/j.conbuildmat.2019.07.080CrossRef

21.

Zhang M, Chen C, Mao L, Wu Q (2018) Use of electroplating sludge in production of fired clay bricks: Characterization and environmental risk evaluation. Constr Build Mater 159:27–36. https://doi.org/10.1016/j.conbuildmat.2017.10.130CrossRef

22.

Basegio T, Berutti F, Bernardes A, Bergmann CP (2002) Environmental and technical aspects of the utilisation of tannery sludge as a raw material for clay products. J Eur Ceram Soc 22:2251–2259. https://doi.org/10.1016/S0955-2219(02)00024-9CrossRef

23.

Herek LCS, Hori CE, Reis MHM et al (2012) Characterization of ceramic bricks incorporated with textile laundry sludge. Ceram Int 38:951–959. https://doi.org/10.1016/j.ceramint.2011.08.015CrossRef

24.

Vashistha P, Kumar V, Singh SK et al (2019) Valorization of paper mill lime sludge via application in building construction materials: a review. Constr Build Mater 211:371–382. https://doi.org/10.1016/J.CONBUILDMAT.2019.03.085CrossRef

25.

El-Mahllawy MS (2008) Characteristics of acid resisting bricks made from quarry residues and waste steel slag. Constr Build Mater 22:1887–1896. https://doi.org/10.1016/j.conbuildmat.2007.04.007CrossRef

26.

Galetakis M, Soultana A (2016) A review on the utilisation of quarry and ornamental stone industry fine by-products in the construction sector. Constr Build Mater 102:769–781. https://doi.org/10.1016/j.conbuildmat.2015.10.204CrossRef

27.

Medina G, Sáez del Bosque IF, Frías M et al (2018) Durability of new recycled granite quarry dust-bearing cements. Constr Build Mater 187:414–425. https://doi.org/10.1016/j.conbuildmat.2018.07.134CrossRef

28.

Loutou M, Hakkou R, Argane R et al (2018) Clayey quarry sludges: thermal transformation, microstructure and technological properties. Waste Biomass Valoriz 9:1805–1815. https://doi.org/10.1007/s12649-017-9972-3CrossRef

29.

Kahime K, Salem ABEN, Hidan AEL, Chakhchar A (2018) Vulnerability and adaptation strategies to climate change on water resources and agriculture in Morocco. Focus on Marrakech-Tensift-Al Haouz, pp 58–77

30.

Ibnoussina M, Dimad A, El Amrani A et al (2016) Caractérisation des matériaux du sol dans la plaine du Haouz (Maroc), pour la construction en terre crue. J Mater Environ Sci 7:3623–3633

31.

AFNOR (1992) NF P94—057—Analyse granulométrique des sols–méthode par sédimentation, p 20

32.

Cook HE, Johnson PD, Matti JC, Zemmels I (1975) IV. Methods of sample preparation, and X-ray diffraction data analysis, X-ray mineralogy laboratory, Deep Sea Drilling Project, University of California, Riverside. Init Rep Deep Sea Drill Proj 25:999–1007

33.

Boski T, Pessoa J, Pedro P et al (1998) Factors governing abundance of hydrolyzable amino acids in the sediments from the N.W. European Continental Margin (47–50°N). Prog Oceanogr 42:145–164. https://doi.org/10.1016/S0079-6611(98)00032-9CrossRef

34.

Heiri O, Lotter AF, Lemcke G (2001) Loss on ignition as a method for estimating organic and carbonate content in sediments: reproducibility and comparability of results. J Paleolimnol 25:101–110. https://doi.org/10.1023/A:1008119611481CrossRef

35.

El Boudour El Idrissi H (2017) Characterization of clays used in the earthenware sector of Marrakech region to improve the quality of the products. University of Cadi Ayyad (Morocco) and University of Liège (Belgium)

36.

Cultrone G, Rodriguez-Navarro C, Sebastian E et al (2001) Carbonate and silicate phase reactions during ceramic firing. Eur J Mineral 13:621–634. https://doi.org/10.1127/0935-1221/2001/0013-0621CrossRef

37.

Bouachera R, Kasimi R, Ibnoussina M et al (2020) Reuse of sewage sludge and waste glass in the production of lightweight aggregates. Mater Today Proc. https://doi.org/10.1016/j.matpr.2020.08.410CrossRef

38.

Bernasconi A, Diella V, Pagani A et al (2011) The role of firing temperature, firing time and quartz grain size on phase-formation, thermal dilatation and water absorption in sanitary-ware vitreous bodies. J Eur Ceram Soc. https://doi.org/10.1016/j.jeurceramsoc.2011.02.006CrossRef

39.

El Ouahabi M, Daoudi L, Fagel N (2014) Preliminary mineralogical and geotechnical characterization of clays from Morocco: application to ceramic industry. Clay Miner 49:35–51CrossRef

40.

Bain JA (1979) Regional appraisal of clay resources—a challenge to the clay mineralogist. Dev Sedimentol 27:437–446. https://doi.org/10.1016/S0070-4571(08)70741-6CrossRef

41.

El IHEB, Daoudi L, El Ouahabi M et al (2016) Suitability of soils and river deposits from Marrakech for the manufacturing of earthenware. Appl Clay Sci 129:108–115. https://doi.org/10.1016/j.clay.2016.05.013CrossRef

42.

Cultrone G, Carrillo Rosua FJ (2020) Growth of metastable phases during brick firing: Mineralogical and microtextural changes induced by the composition of the raw material and the presence of additives. Appl Clay Sci 185:105419. https://doi.org/10.1016/J.CLAY.2019.105419CrossRef

43.

Hajjaji M, Mezouari H (2011) A calcareous clay from Tamesloht (Al Haouz, Morocco): properties and thermal transformations. Appl Clay Sci 51:507–510. https://doi.org/10.1016/j.clay.2011.01.018CrossRef

44.

Mahmoudi S, Bennour A, Srasra E, Zargouni F (2017) Characterization, firing behavior and ceramic application of clays from the Gabes region in South Tunisia. Appl Clay Sci 135:215–225. https://doi.org/10.1016/J.CLAY.2016.09.023CrossRef

45.

Cultrone G, Sebastián E, Elert K et al (2004) Influence of mineralogy and firing temperature on the porosity of bricks. J Eur Ceram Soc 24:547–564. https://doi.org/10.1016/S0955-2219(03)00249-8CrossRef

46.

Tabit K, Hajjou H, Waqif M, Saâdi L (2020) Effect of CaO/SiO₂ ratio on phase transformation and properties of anorthite-based ceramics from coal fly ash and steel slag. Ceram Int 46:7550–7558. https://doi.org/10.1016/j.ceramint.2019.11.254CrossRef

47.

Loutou M, Hajjaji M (2017) Clayey wastes-based lightweight aggregates: Heating transformations and physical/mechanical properties. Appl Clay Sci 150:56–62. https://doi.org/10.1016/J.CLAY.2017.09.011CrossRef

48.

El Boudour El Idrissi H, Daoudi L, El Ouahabi M et al (2018) The influence of clay composition and lithology on the industrial potential of earthenware. Constr Build Mater 172:650–659. https://doi.org/10.1016/j.conbuildmat.2018.04.019CrossRef

49.

Sahbaz O, Üniversitesi D (2012) Physicochemical problems of mineral processing view project, p 48

50.

Zhang J, Liu T, Huang Q et al (2020) Preparation, properties characterization and structure formation mechanism of silica sand tailings-based ceramic materials. Mater Chem Phys 255:123611. https://doi.org/10.1016/j.matchemphys.2020.123611CrossRef

Titel: The clayey quarry sludge from a waste to a valuable raw material for red ceramics
verfasst von: Rachida Bouachera
Rachida Kasimi
Mounsif Ibnoussina
Mariam El Aoud
Yassine Taha
Hicham El Boudour El Idrissi
Rachid Hakkou
Publikationsdatum: 11.03.2022
Verlag: Springer Japan
Erschienen in: Journal of Material Cycles and Waste Management / Ausgabe 3/2022
Print ISSN: 1438-4957
Elektronische ISSN: 1611-8227
DOI: https://doi.org/10.1007/s10163-022-01383-z

Springer Professional

Abstract

Graphical abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3/2022

Activity and emission inventory of open waste burning at the household level in developing countries: a case study of Semarang City

Valorization of marine sediments in geopolymer mortars: physico-mechanical, microstructural and environmental investigations at laboratory scale

The willingness to household waste disposal practices of residents in rural China

Application of titania from Ti-Salt flocculated sludge for UHPC

Seasonal quantification and characterization of solid waste generation in tertiary institution: a case study

Influence of acetic acid soaking and mechanical grinding treatment on the properties of treated recycled aggregate concrete