nach oben

Journal of Material Cycles and Waste Management

Erschienen in:

22.02.2022 | ORIGINAL ARTICLE

Influence of acetic acid soaking and mechanical grinding treatment on the properties of treated recycled aggregate concrete

verfasst von: Abhishek Verma, V. S. Babu, S. Arunachalam

Erschienen in: Journal of Material Cycles and Waste Management | Ausgabe 3/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The utilization of recycled aggregate (RA) extracted from construction and demolition (C&D) waste contributes to reducing the usage of natural aggregate (NA) to produce new concrete. The authors used immersion of RA in mild acetic acid (3%concentration), with subsequent rotation in Los Angeles (LA) abrasion machine (mechanical grinding) treatment to produce high-quality RA in the current work. To study the influence of treated recycled aggregates (TRAs), various types of TRAs [viz: TRA (0 min), TRA (3 min), TRA (5 min), TRA (7 min), TRA (10 min), TRA (12 min)] were replaced with NA in a control mix of M40 grade concrete. In this work, different replacement levels (viz: 0%, 25%, 50%, 75%, and 100%) were used to substitute NA in each different type of TRAs. The properties viz: slump, compressive, tensile strength, flexural strength, density, modulus of elasticity, ultrasonic pulse velocity, drying shrinkage, and Scanning electron microscope of RA were reported. Based on the test results, 72 h of soaking in mild acetic acid (3% concentration) followed by 7 min of mechanical grinding in the LA abrasion machine was observed as the optimal treatment duration to generate high-quality RA. The compressive and split tensile strength were reduced by 17.11%, 14.33%, respectively, in concrete with RA compared to natural aggregate concrete (NAC).

Vorheriger Artikel Potential and future prospects of biochar-based materials and their applications in removal of organic contaminants from industrial wastewater

Nächster Artikel The investment and treatment efficiencies of industrial solid waste in China’s Yangtze and non-Yangtze River Economic Belts

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Singh M, Choudhary K, Srivastava A, Singh-Sangwan K, Bhunia D (2017) A study on environmental and economic impacts of using waste marble powder in concrete. J Build Eng 13:87–95. https://doi.org/10.1016/j.jobe.2017.07.009CrossRef

Leite FDC, Motta RDS, Vasconcelos KL, Bernucci L (2011) Laboratory evaluation of recycled construction and demolition waste for pavements. Constr Build Mater 25(6):2972–2979. https://doi.org/10.1016/j.conbuildmat.2010.11.105CrossRef

Kisku N, Joshi H, Ansari M, Panda SK, Nayak S, Dutta SC (2017) A critical review and assessment for usage of recycled aggregate as sustainable construction material. Constr Build Mater 131:721–740. https://doi.org/10.1016/j.conbuildmat.2016.11.029CrossRef

Al-Bayati HKA, Das PK, Tighe SL, Baaj H (2016) Evaluation of various treatment methods for enhancing the physical and morphological properties of coarse recycled concrete aggregate. Constr Build Mater 112:284–298. https://doi.org/10.1016/j.conbuildmat.2016.02.176CrossRef

Bostanci SC (2020) Use of waste marble dust and recycled glass for sustainable concrete production. J Clean Prod. https://doi.org/10.1016/j.jclepro.2019.119785CrossRef

Fan Y, Xiao J, Tam VWY (2014) Effect of old attached mortar on the creep of recycled aggregate concrete. Struct Concr 15(2):169–178. https://doi.org/10.1002/suco.201300055CrossRef

Ying J, Meng Q, Xiao J (2017) Effect of CO₂-modified recycled aggregate on compressive strength of concrete. Jianzhu Cailiao Xuebao/J Build Mater 20(2):277–282. https://doi.org/10.3969/j.issn.1007-9629.2017.02.021CrossRef

Babu VS, Mullick AK, Jain KK, Singh PK (2014) Strength and durability characteristics of high-strength concrete with recycled aggregate-influence of processing. J Sustain Cem Mater 4(1):54–71. https://doi.org/10.1080/21650373.2014.976777CrossRef

Dimitriou G, Savva P, Petrou MF (2018) Enhancing mechanical and durability properties of recycled aggregate concrete. Constr Build Mater 158:228–235. https://doi.org/10.1016/j.conbuildmat.2017.09.137CrossRef

10.

Spaeth V, Djerbi-Tegguer A (2013) Improvement of recycled concrete aggregate properties by polymer treatments. Int J Sustain Built Environ 2(2):143–152. https://doi.org/10.1016/j.ijsbe.2014.03.003CrossRef

11.

Kazemian F, Rooholamini H, Hassani A (2019) Mechanical and fracture properties of concrete containing treated and untreated recycled concrete aggregates. Constr Build Mater 209:690–700. https://doi.org/10.1016/j.conbuildmat.2019.03.179CrossRef

12.

Akbarnezhad A, Ong KCG, Zhang MH, Tam CT, Foo TWJ (2011) Microwave-assisted beneficiation of recycled concrete aggregates. Constr Build Mater 25(8):3469–3479. https://doi.org/10.1016/j.conbuildmat.2011.03.038CrossRef

13.

Abbas A, Fathifazl G, Burkan-Isgor O, Razaqpur AG, Fournier B, Foo S (2008) Proposed method for determining the residual mortar content of recycled concrete aggregates. J ASTM Int. https://doi.org/10.1520/JAI101087CrossRef

14.

Tam VWY, Tam CM, Le KN (2007) Removal of cement mortar remains from recycled aggregate using pre-soaking approaches. Resour Conserv Recycl 50(1):82–101. https://doi.org/10.1016/j.resconrec.2006.05.012CrossRef

15.

Zega CJ, Di Maio AA (2009) Recycled concrete made with different natural coarse aggregates exposed to high temperature. Constr Build Mater 23(5):2047–2052. https://doi.org/10.1016/j.conbuildmat.2008.08.017CrossRef

16.

Pawluczuk E, Kalinowska-Wichrowska K, Bołtryk M, Jiménez JR, Fernández JM (2019) The influence of heat and mechanical treatment of concrete rubble on the properties of recycled aggregate concrete. Materials (Basel). https://doi.org/10.3390/ma12030367CrossRef

17.

Santha-Kumar G, Minocha AK (2018) Studies on thermo-chemical treatment of recycled concrete fine aggregates for use in concrete. J Mater Cycles Waste Manag 20(1):469–480. https://doi.org/10.1007/s10163-017-0604-6CrossRef

18.

Santha-Kumar G, Saini PK, Karade SR, Minocha AK (2019) Chemico-thermal treatment for quality enhancement of recycled concrete fine aggregates. J Mater Cycles Waste Manag 21(5):1197–1210. https://doi.org/10.1007/s10163-019-00874-wCrossRef

19.

Kim HS, Kim JM, Kim B (2018) Quality improvement of recycled fine aggregate using steel ball with the help of acid treatment. J Mater Cycles Waste Manag 20(2):754–765. https://doi.org/10.1007/s10163-017-0639-8CrossRef

20.

Katz A (2004) Treatments for the improvement of recycled aggregate. J Mater Civ Eng 16(6):597–603. https://doi.org/10.1061/(ASCE)0899-1561(2004)16:6(597)CrossRef

21.

García-González J, Rodríguez-Robles D, Juan-Valdés A, del Pozo JMM, Guerra-Romero MI (2014) Pre-saturation technique of the recycled aggregates: Solution to the water absorption drawback in the recycled concrete manufacture. Materials (Basel) 7(9):6224–6236. https://doi.org/10.3390/ma7096224CrossRef

22.

Kou SC, Poon CS (2010) Properties of concrete prepared with PVA-impregnated recycled concrete aggregates. Cem Concr Compos. https://doi.org/10.1016/j.cemconcomp.2010.05.003CrossRef

23.

Qiu J, Tng DQS, Yang EH (2014) Surface treatment of recycled concrete aggregates through microbial carbonate precipitation. Constr Build Mater 57:144–150. https://doi.org/10.1016/j.conbuildmat.2014.01.085CrossRef

24.

Li J, Xiao H, Zhou Y (2009) Influence of coating recycled aggregate surface with pozzolanic powder on properties of recycled aggregate concrete. Constr Build Mater 23(3):1287–1291. https://doi.org/10.1016/j.conbuildmat.2008.07.019CrossRef

25.

Tsujino M, Noguchi T, Tamura M, Kanematsu M, Maruyama I (2007) Application of conventionally recycled coarse aggregate to concrete structure by surface modification treatment. J Adv Concr Technol. https://doi.org/10.3151/jact.5.13CrossRef

26.

Fang HY, Liu FL, Yang JH (2020) High-quality coarse aggregate recycling from waste concrete by impact crushing. J Mater Cycles Waste Manag 22(3):887–896. https://doi.org/10.1007/s10163-020-00984-wCrossRef

27.

Tam VWY, Tam CM, Le KN (2007) Removal of cement mortar remains from recycled aggregate using pre-soaking approaches. Resour Conser Recycl 50(1):82–101CrossRef

28.

Kapoor K, Bohroo AUR (2019) Study on the influence of attached mortar content on the properties of recycled concrete aggregate. Lecture Notes in Civil Engineering, vol 30. Springer, Singapore, pp 337–347

29.

Pandurangan K, Dayanithy A, Om-Prakash S (2016) Influence of treatment methods on the bond strength of recycled aggregate concrete. Constr Build Mater 120:212–221. https://doi.org/10.1016/j.conbuildmat.2016.05.093CrossRef

30.

Limbachiya MC, Leelawat T, Dhir RK (2000) Use of recycled concrete aggregate in high-strength concrete. Mater Struct Constr 33(9):574–580. https://doi.org/10.1007/bf02480538CrossRef

31.

Wang L, Wang J, Qian X, Chen P, Xu Y, Guo J (2017) An environmentally friendly method to improve the quality of recycled concrete aggregates. Constr Build Mater 144(February 2019):432–441. https://doi.org/10.1016/j.conbuildmat.2017.03.191CrossRef

32.

Ogawa H, Nawa T (2012) Improving the quality of recycled fine aggregate by selective removal of brittle defects. J Adv Concr Technol 10(12):395–410. https://doi.org/10.3151/jact.10.395CrossRef

33.

Despotovi IC. The improvement of recycled concrete aggregate-a review paper. In: 4th International Conference on Contemporary Achievements in Civil Engineering. University of Novi Sad, Faculty of Civil Engineering Subotica, pp 443–454

34.

Hanif A, Kim Y, Lu Z, Park C (2017) Early-age behavior of recycled aggregate concrete under steam curing regime. J Clean Prod 152:103–114. https://doi.org/10.1016/j.jclepro.2017.03.107CrossRef

35.

ND (Bureau of Indian Standards. IS:1489(part-1)-1999. Indian Stand. portland-pozzolana Cem. Specif. part-1 fly ash based, third Revis

36.

BIS (Bureau of Indian Standards, New Delhi): 15388-2003, Indian standard specification for silica fume

37.

ND (Bureau of Indian Standards, “IS : 2386-1963. Indian Stand. methods test aggregates Concr. (Part-I to Part-VIII).

38.

ND (Bureau of Indian Standards. “IS : 383-2016,” Indian Stand. Specif. coarse fine aggregates from Nat. sources Concr. third Revis. Reaffirmed 2016

39.

Neville AM (2011) Concrete technology fifth edition, 2nd edn. Pearson education asia, New delhi

40.

Babu VS, Mullick AK, Jain KK, Singh PK (2014) Mechanical properties of high strength concrete with recycled aggregate-influence of processing. Indian Concr J 88(5):10–26

41.

Silva RV, De Brito J, Dhir RK (2015) The influence of the use of recycled aggregates on the compressive strength of concrete: a review. Eur J Environ Civ Eng 19(7):825–849. https://doi.org/10.1080/19648189.2014.974831CrossRef

42.

Faysal RM, Maslehuddin M, Shameem M, Ahmad S, Adekunle SK (2020) Effect of mineral additives and two-stage mixing on the performance of recycled aggregate concrete. J Mater Cycles Waste Manag 22(5):1587–1601. https://doi.org/10.1007/s10163-020-01048-9CrossRef

43.

Tam VWY, Gao XF, Tam CM (2005) Microstructural analysis of recycled aggregate concrete produced from two-stage mixing approach. Cem Concr Res 35(6):1195–1203. https://doi.org/10.1016/j.cemconres.2004.10.025CrossRef

44.

Shaikh FUA, Nguyen HL (2013) Properties of concrete containing recycled construction and demolition wastes as coarse aggregates. J Sustain Cem Mater 2(3–4):204–217. https://doi.org/10.1080/21650373.2013.833861CrossRef

45.

Guo Z, Chen C, Lehman DE, Xiao W, Zheng S, Fan B (2020) Mechanical and durability behaviours of concrete made with recycled coarse and fine aggregates. Eur J Environ Civ Eng 24(2):171–189. https://doi.org/10.1080/19648189.2017.1371083CrossRef

46.

Kang M, Weibin L (2018) Effect of the aggregate size on strength properties of recycled aggregate concrete. Adv Mater Sci Eng. https://doi.org/10.1155/2018/2428576CrossRef

47.

Bai G, Zhu C, Liu C, Liu B (2020) An evaluation of the recycled aggregate characteristics and the recycled aggregate concrete mechanical properties. Constr Build Mater 240:117978. https://doi.org/10.1016/j.conbuildmat.2019.117978CrossRef

48.

Chakradhara-Rao M, Bhattacharyya SK, Barai SV (2011) Influence of field recycled coarse aggregate on properties of concrete. Mater Struct Constr 44(1):205–220. https://doi.org/10.1617/s11527-010-9620-xCrossRef

49.

Mukharjee BB, Barai SV (2017) Mechanical and microstructural characterization of recycled aggregate concrete containing silica nanoparticles. J Sustain Cem Mater 6(1):37–53. https://doi.org/10.1080/21650373.2016.1230899CrossRef

50.

Bravo M, de Brito J, Evangelista L, Pacheco J (2017) Superplasticizer’s efficiency on the mechanical properties of recycled aggregates concrete: Influence of recycled aggregates composition and incorporation ratio. Constr Build Mater 153:129–138. https://doi.org/10.1016/j.conbuildmat.2017.07.103CrossRef

51.

Topçu IB, Şengel S (2004) Properties of concretes produced with waste concrete aggregate. Cem Concr Res 34(8):1307–1312. https://doi.org/10.1016/j.cemconres.2003.12.019CrossRef

52.

Padmini AK, Ramamurthy K, Mathews MS (2009) Influence of parent concrete on the properties of recycled aggregate concrete. Constr Build Mater 23(2):829–836. https://doi.org/10.1016/j.conbuildmat.2008.03.006CrossRef

53.

Alexandridou C, Angelopoulos GN, Coutelieris FA (2018) Mechanical and durability performance of concrete produced with recycled aggregates from Greek construction and demolition waste plants. J Clean Prod 176(2018):745–757. https://doi.org/10.1016/j.jclepro.2017.12.081CrossRef

54.

Limbachiya M, Meddah MS, Ouchagour Y (2012) Use of recycled concrete aggregate in fly-ash concrete. Constr Build Mater 27(1):439–449. https://doi.org/10.1016/j.conbuildmat.2011.07.023CrossRef

55.

Belén GF, Fernando MA, Diego CL, Sindy SP (2011) Stress-strain relationship in axial compression for concrete using recycled saturated coarse aggregate. Constr Build Mater 25(5):2335–2342. https://doi.org/10.1016/j.conbuildmat.2010.11.031CrossRef

56.

Silva RV, De Brito J, Dhir RK (2016) Establishing a relationship between modulus of elasticity and compressive strength of recycled aggregate concrete. J Clean Prod 112:2171–2186. https://doi.org/10.1016/j.jclepro.2015.10.064CrossRef

57.

Kou SC, Poon CS (2013) Long-term mechanical and durability properties of recycled aggregate concrete prepared with the incorporation of fly ash. Cem Concr Compos 37(1):12–19. https://doi.org/10.1016/j.cemconcomp.2012.12.011CrossRef

58.

Kwan WH, Ramli M, Kam KJ, Sulieman MZ (2012) Influence of the amount of recycled coarse aggregate in concrete design and durability properties. Constr Build Mater 26(1):565–573. https://doi.org/10.1016/j.conbuildmat.2011.06.059CrossRef

59.

Haddad K, Haddad O, Aggoun S, Kaci S (2017) Correlation between the porosity and ultrasonic pulse velocity of recycled aggregate concrete at different saturation levels. Can J Civ Eng 44(11):911–917. https://doi.org/10.1139/cjce-2016-0449CrossRef

60.

Wang J, Zhang J, Cao D, Dang H, Ding B (2020) Comparison of recycled aggregate treatment methods on the performance for recycled concrete. Constr Build Mater 234:117366. https://doi.org/10.1016/j.conbuildmat.2019.117366CrossRef

61.

Kim JH, Sung JH, Jeon CS, Lee SH, Kim HS (2019) A study on the properties of recycled aggregate concrete and its production facilities. Appl Sci. https://doi.org/10.3390/app9091935CrossRef

62.

Zhang H, Wang Y, Lehman DE, Geng Y, Kuder K (2020) Time-dependent drying shrinkage model for concrete with coarse and fine recycled aggregate. Cem Concr Compos 105(May 2019):103426. https://doi.org/10.1016/j.cemconcomp.2019.103426CrossRef

63.

Tam VWY, Tam CM (2008) Diversifying two-stage mixing approach (TSMA) for recycled aggregate concrete: TSMAs and TSMAsc. Constr Build Mater 22(10):2068–2077. https://doi.org/10.1016/j.conbuildmat.2007.07.024CrossRef

64.

Xiao J, Li W, Sun Z, Lange DA, Shah SP (2013) Properties of interfacial transition zones in recycled aggregate concrete tested by nanoindentation. Cem Concr Compos 37(1):276–292. https://doi.org/10.1016/j.cemconcomp.2013.01.006CrossRef

65.

Tam VWY, Wang K, Tam CM (2008) Assessing relationships among properties of demolished concrete, recycled aggregate and recycled aggregate concrete using regression analysis. J Hazard Mater 152(2):703–714. https://doi.org/10.1016/j.jhazmat.2007.07.061CrossRef

66.

Kou SC, Poon CS, Agrela F (2011) Comparisons of natural and recycled aggregate concretes prepared with the addition of different mineral admixtures. Cem Concr Compos 33(8):788–795. https://doi.org/10.1016/j.cemconcomp.2011.05.009CrossRef

67.

Ann KY, Moon HY, Kim YB, Ryou J (2008) Durability of recycled aggregate concrete using pozzolanic materials. Waste Manag 28(6):993–999. https://doi.org/10.1016/j.wasman.2007.03.003CrossRef

68.

Pedro D, de Brito J, Evangelista L (2017) Evaluation of high-performance concrete with recycled aggregates: use of densified silica fume as cement replacement. Constr Build Mater 147:803–814. https://doi.org/10.1016/j.conbuildmat.2017.05.007CrossRef

69.

Wang L, Wang J, Qian X, Chen P, Xu Y, Guo J (2017) An environmentally friendly method to improve the quality of recycled concrete aggregates. Constr Build Mater 144:432–441. https://doi.org/10.1016/j.conbuildmat.2017.03.191CrossRef

Titel: Influence of acetic acid soaking and mechanical grinding treatment on the properties of treated recycled aggregate concrete
verfasst von: Abhishek Verma
V. S. Babu
S. Arunachalam
Publikationsdatum: 22.02.2022
Verlag: Springer Japan
Erschienen in: Journal of Material Cycles and Waste Management / Ausgabe 3/2022
Print ISSN: 1438-4957
Elektronische ISSN: 1611-8227
DOI: https://doi.org/10.1007/s10163-022-01360-6

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3/2022

Sustainable alkali-activated binders with municipal solid waste incineration ashes as sand or fly ash replacement

Examining the effect of the particle modification on zinc tailing waste as a cementitious material in concrete: performance and toxicity assessment

Fly ash bricks development using concrete waste debris and self-healing bacteria

Influence of ferrochrome ash on mechanical and microstructure properties of ambient cured fly ash-based geopolymer concrete

Potential and future prospects of biochar-based materials and their applications in removal of organic contaminants from industrial wastewater

Long-term estimation of plastic material resources from end-of-life vehicles in China: a scenario analysis considering multiple industry standards