nach oben

Journal of Material Cycles and Waste Management

Erschienen in:

20.03.2022 | ORIGINAL ARTICLE

Examining the effect of the particle modification on zinc tailing waste as a cementitious material in concrete: performance and toxicity assessment

verfasst von: Yash Agrawal, Trilok Gupta

Erschienen in: Journal of Material Cycles and Waste Management | Ausgabe 3/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The main purpose of this study is to assess the performance of zinc mine tailing waste as a substitute for cement (upto 20%) in concrete and in novelty effect of the mechanical treatment on the zinc tailing waste concrete is studied and compared with the results of the untreated zinc tailing waste. Mechanical and durability (water permeability, drying shrinkage, dynamic elastic modulus, and energy absorption capacity) tests were tailored to evaluate the effect of both treated and untreated zinc mine tailing waste in the study. Additionally, the scanning electron microscopic analysis and sustainability assessments of the concrete mixtures were also carried out. The mechanical and durability properties of the zinc tailing waste concrete decreased as the cement content reduce. However, the obtained test results revealed that comparable mechanical and durability performance was achieved with the 5% with both types of zinc mine tailing waste. The findings of the sustainability assessment revealed that replacing cement with the tailing waste lowered the embodied emission (EE) and embodied CO₂ emission (ECO₂E), which gives an encouraging insight into the development of eco-friendly concrete and helps to resolve the issue of waste disposal caused by zinc mine tailing waste.

Vorheriger Artikel Challenges to reducing post-consumer plastic rejects from the MSW selective collection at two MRFs in São Paulo city, Brazil

Nächster Artikel Seasonal quantification and characterization of solid waste generation in tertiary institution: a case study

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Lu X, Wang H (2012) Microbial oxidation of sulfide tailings and the environmental consequences. Elements 8(2):119–124. https://doi.org/10.2113/gselements.8.2.119CrossRef

Siddique S, Jang JG (2020) Assessment of molybdenum mine tailings as filler in cement mortar. J Build Eng 31:101322. https://doi.org/10.1016/j.jobe.2020.101322CrossRef

Hudson-Edwards KA, Jamieson HE, Lottermoser BG (2011) Mine wastes: past, present, future. Elements 7:375–380. https://doi.org/10.2113/gselements.7.6.375CrossRef

Simonsen AMT, Solismaa S, Hansen HK, Jensen PE (2020) Evaluation of mine tailings’ potential as supplementary cementitious materials based on chemical, mineralogical and physical characteristics. Waste Manag 102:710–721. https://doi.org/10.1016/j.wasman.2019.11.037CrossRef

Dudka S, Adriano DC (1997) Environmental impacts of metal ore mining and processing: a review. J Environ Qual 26(3):590–602. https://doi.org/10.2134/jeq1997.00472425002600030003xCrossRef

Perner K, Leipe T, Dellwig O et al (2010) Contamination of arctic Fjord sediments by Pb-Zn mining at Maarmorilik in central West Greenland. Mar Pollut Bull 60(7):1065–1073CrossRef

Dold B (2014) Evolution of acid mine drainage formation in sulphidic mine tailings. Minerals 4(3):621–641. https://doi.org/10.3390/min4030621CrossRef

Panchal S, Deb D, Sreenivas T (2018) Mill tailings based composites as paste backfill in mines of U-bearing dolomitic limestone ore. J Rock Mech Geotech Eng 10(2):310–322. https://doi.org/10.1016/j.jrmge.2017.08.004CrossRef

Zhang Z, Zhang Z, Yin S, Yu L (2020) Utilization of iron tailings sand as an environmentally friendly alternative to natural river sand in high-strength concrete: shrinkage characterization and mitigation strategies. Materials (Basel) 13(24):5614. https://doi.org/10.3390/ma13245614CrossRef

10.

Wang Q, Yao G, Zhu X et al (2019) Preparation of portland cement with gold ore tailings. Adv Mater Sci Eng. https://doi.org/10.1155/2019/1324065CrossRef

11.

Alegbe MJ, Ayanda OS, Ndungu P et al (2019) Physicochemical characteristics of acid mine drainage, simultaneous remediation and use as feedstock for value added products. J Environ Chem Eng 7(3):103097. https://doi.org/10.1016/j.jece.2019.103097CrossRef

12.

Cai L, Ma B, Li X et al (2016) Mechanical and hydration characteristics of autoclaved aerated concrete (AAC) containing iron-tailings: effect of content and fineness. Constr Build Mater 128:361–372. https://doi.org/10.1016/j.conbuildmat.2016.10.031CrossRef

13.

Thomas BS, Damare A, Gupta RC (2013) Strength and durability characteristics of copper tailing concrete. Constr Build Mater 48:894–900. https://doi.org/10.1016/j.conbuildmat.2013.07.075CrossRef

14.

Choi YW, Kim YJ, Choi O et al (2009) Utilization of tailings from tungsten mine waste as a substitution material for cement. Constr Build Mater 23(7):2481–2486. https://doi.org/10.1016/j.conbuildmat.2009.02.006CrossRef

15.

Kundu S, Aggarwal A, Mazumdar S, Dutt KB (2016) Stabilization characteristics of copper mine tailings through its utilization as a partial substitute for cement in concrete: preliminary investigations. Environ Earth Sci 75(3):227. https://doi.org/10.1007/s12665-015-5089-9CrossRef

16.

Dandautiya R, Singh AP (2019) Utilization potential of fly ash and copper tailings in concrete as partial replacement of cement along with life cycle assessment. Waste Manag 99:90–101. https://doi.org/10.1016/j.wasman.2019.08.036CrossRef

17.

Han F, Song S, Liu J, Huang S (2019) Properties of steam-cured precast concrete containing iron tailing powder. Powder Technol 345:292–299. https://doi.org/10.1016/j.powtec.2019.01.007CrossRef

18.

Saedi A, Jamshidi-Zanjani A, Darban AK (2020) A review on different methods of activating tailings to improve their cementitious property as cemented paste and reusability. J Environ Manage 270:110881CrossRef

19.

Wei B, Zhang Y, Bao S (2017) Preparation of geopolymers from vanadium tailings by mechanical activation. Constr Build Mater 145:236–242. https://doi.org/10.1016/j.conbuildmat.2017.03.234CrossRef

20.

Mucsi G, Kumar S, Csoke B et al (2015) Control of geopolymer properties by grinding of land filled fly ash. Int J Miner Process 143:50–58. https://doi.org/10.1016/j.minpro.2015.08.010CrossRef

21.

Yao G, Liu Q, Wang J et al (2019) Effect of mechanical grinding on pozzolanic activity and hydration properties of siliceous gold ore tailings. J Clean Prod 217:12–21. https://doi.org/10.1016/j.jclepro.2019.01.175CrossRef

22.

Ermolovich EA, Ermolovich OV (2016) Effects of mechanical activation on the structural changes and microstructural characteristics of the components of ferruginous quartzite beneficiation tailings. Int J Min Sci Technol 26(6):1043–1049. https://doi.org/10.1016/j.ijmst.2016.09.012CrossRef

23.

Lyu X, Yao G, Wang Z et al (2020) Hydration kinetics and properties of cement blended with mechanically activated gold mine tailings. Thermochim Acta 683:178457. https://doi.org/10.1016/j.tca.2019.178457CrossRef

24.

Xu W, Yang X, Li W, Guo L (2020) Fineness effect on pozzolanic activity of Cu-Ni slag in cemented tailing backfill. Adv Mater Sci Eng. https://doi.org/10.1155/2020/7172890CrossRef

25.

Brás I, Silva PC, Almeida RMSF, Silva ME (2020) Recycling wastes in concrete production: performance and eco-toxicity assessment. Waste Biomass Valor 11(3):1169–1180. https://doi.org/10.1007/s12649-018-0382-yCrossRef

26.

Fontes CMA, Silva RB, Lima PRL (2019) Characterization and effect of using bottom and fly ashes from co-combustion of cocoa waste as mineral addition in concrete. Waste Biomass Valor. https://doi.org/10.1007/s12649-017-0031-xCrossRef

27.

Saranya P, Nagarajan P, Shashikala AP (2019) Development of ground-granulated blast-furnace slag-dolomite geopolymer concrete. ACI Mater J. https://doi.org/10.14359/51716981CrossRef

28.

Gupta T, Sharma RK, Chaudhary S (2015) Impact resistance of concrete containing waste rubber fiber and silica fume. Int J Impact Eng 83:76–87. https://doi.org/10.1016/j.ijimpeng.2015.05.002CrossRef

29.

Agrawal Y, Siddique S, Sharma RK, Gupta T (2021) Valorization of granite production dust in development of rich and lean cement mortar. J Mater Cycles Waste Manag 23(2):686–698. https://doi.org/10.1007/s10163-020-01158-4CrossRef

30.

Lai Y, Yu J, Liu S et al (2021) Experimental study to improve the mechanical properties of iron tailings sand by using MICP at low pH. Constr Build Mater 273:121729. https://doi.org/10.1016/j.conbuildmat.2020.121729CrossRef

31.

Agrawal Y, Gupta T, Siddique S, Sharma RK (2021) Potential of dolomite industrial waste as construction material: a review. Innov Infrastruct Solut 6(4):1–15. https://doi.org/10.1007/s41062-021-00570-5CrossRef

32.

Chouhan DS, Agrawal Y, Gupta T, Sharma RK (2017) Utilization of granite slurry waste in concrete: a review. Indian J Sci Technol 10:6CrossRef

33.

BIS: 81121989 (2013) Specification for 43 grade ordinary portland cement. Bureau of Indian Standards, New Delhi

34.

BIS: 383 (2016) Coarse and fine aggregate for concrete—specification. Bureau of Indian Standards, New Delhi

35.

BIS: 456 (2006) Plain and reinforced concrete. Bureau of Indian Standards, New Delhi

36.

BIS: 10262 (2009) Indian standard guidelines for concrete mix design proportioning. Bureau of Indian Standards, New Delhi

37.

Cheng Y, Huang F, Li W et al (2016) Test research on the effects of mechanochemically activated iron tailings on the compressive strength of concrete. Constr Build Mater 118:164–170. https://doi.org/10.1016/j.conbuildmat.2016.05.020CrossRef

38.

Senneca O, Salatino P, Chirone R et al (2011) Mechanochemical activation of high-carbon fly ash for enhanced carbon reburning. Proc Combust Inst. https://doi.org/10.1016/j.proci.2010.07.067CrossRef

39.

BS 1881: Part 103 (1983) Determination of compacting factor. British Standards Institution, London

40.

BS 181: Part 116 (1983) Methods for determination of compressive strength of concrete cubes. British Standards Institution, London

41.

ASTM C78/C78M-16 (2018) Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading). ASTM Int.

42.

BIS:1237 (2012) Cement concrete flooring tiles—specification. Bureau of Indian Standards, New Delhi

43.

DIN 1048 (1991) EN-Testing Concr Determ Depth Penetration Water Under Press Hardened Concrete.

44.

ASTM C157/C157M-08 (2008) Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete. ASTM Int.

45.

BIS: 13311 (Part 1) (1992) Method of Non-destructive testing of concrete, Part 1: Ultrasonic pulse velocity. Bureau of Indian Standards, New Delhi

46.

ACI 544.2R-89 (1999) Measurement of Properties of Fiber Reinforced Concrete. Am Concr Inst

47.

Gupta T, Kothari S, Siddique S et al (2019) Influence of stone processing dust on mechanical, durability and sustainability of concrete. Constr Build Mater 223:918–927. https://doi.org/10.1016/j.conbuildmat.2019.07.188CrossRef

48.

Siddique S, Chaudhary S, Shrivastava S, Gupta T (2019) Sustainable utilisation of ceramic waste in concrete: exposure to adverse conditions. J Clean Prod 210:246–255. https://doi.org/10.1016/j.jclepro.2018.10.231CrossRef

49.

Wu R, Liu J (2018) Experimental study on the concrete with compound admixture of iron tailings and slag powder under low cement clinker system. Adv Mater Sci Eng. https://doi.org/10.1155/2018/9816923CrossRef

50.

Wang X, Yu R, Shui Z et al (2018) Development of a novel cleaner construction product: ultra-high performance concrete incorporating lead-zinc tailings. J Clean Prod 196:172–182. https://doi.org/10.1016/j.jclepro.2018.06.058CrossRef

51.

Debbarma S, Ransinchung G, Singh S (2020) Zinc waste as a substitute for portland cement in roller-compacted concrete pavement mixes containing RAP aggregates. J Mater Civ Eng 32(8):04020207. https://doi.org/10.1061/(asce)mt.1943-5533.0003278CrossRef

52.

Wang Z, Chen HJ, Pei LZ et al (2021) Preparation and characterisation of environmental-friendly ceramsites from iron ore tailings and sludge. Int J Sustain Eng 14(4):884–892. https://doi.org/10.1080/19397038.2020.1737753CrossRef

53.

Wu CR, Hong ZQ, Yin YH, Kou SC (2020) Mechanical activated waste magnetite tailing as pozzolanic material substitute for cement in the preparation of cement products. Constr Build Mater 252:119129. https://doi.org/10.1016/j.conbuildmat.2020.119129CrossRef

54.

Zheng K, Zhou J, Gbozee M (2015) Influences of phosphate tailings on hydration and properties of Portland cement. Constr Build Mater 98:593–601. https://doi.org/10.1016/j.conbuildmat.2015.08.115CrossRef

55.

Filho JNS, Da Silva SN, Silva GC et al (2017) Technical and environmental feasibility of interlocking concrete pavers with iron ore tailings from tailings dams. J Mater Civ Eng 29(9):04017104. https://doi.org/10.1061/(asce)mt.1943-5533.0001937CrossRef

56.

Onuaguluchi O, Eren Ö (2012) Cement mixtures containing copper tailings as an additive: durability properties. Mater Res 15:1029–1036. https://doi.org/10.1590/S1516-14392012005000129CrossRef

57.

Onuaguluchi O, Eren Ö (2012) Durability-related properties of mortar and concrete containing copper tailings as a cement replacement material. Mag Concr Res 64(11):1015–1023. https://doi.org/10.1680/macr.11.00170CrossRef

58.

Kalla P, Rana A, Chad YB et al (2015) Durability studies on concrete containing wollastonite. J Clean Prod 87:726–734. https://doi.org/10.1016/j.jclepro.2014.10.038CrossRef

59.

Ghafari E, Ghahari SA, Costa H et al (2016) Effect of supplementary cementitious materials on autogenous shrinkage of ultra-high performance concrete. Constr Build Mater 127:43–48. https://doi.org/10.1016/j.conbuildmat.2016.09.123CrossRef

60.

Aslam M, Shafigh P, Jumaat MZ (2016) Drying shrinkage behaviour of structural lightweight aggregate concrete containing blended oil palm bio-products. J Clean Prod 127:183–194. https://doi.org/10.1016/j.jclepro.2016.03.165CrossRef

61.

Belferra A, Kriker A, Abboudi S, Bi ST (2016) Effect of granulometric correction of dune sand and pneumatic waste metal fibers on shrinkage of concrete in arid climates. J Clean Prod 112:3048–3056. https://doi.org/10.1016/j.jclepro.2015.11.007CrossRef

62.

Ling G, Shui Z, Gao X et al (2021) Utilizing iron ore tailing as cementitious material for eco-friendly design of ultra-high performance concrete (Uhpc). Materials (Basel) 14(8):1829. https://doi.org/10.3390/ma14081829CrossRef

63.

ASTM C618–19 (2019) Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete. ASTM Int.

Titel: Examining the effect of the particle modification on zinc tailing waste as a cementitious material in concrete: performance and toxicity assessment
verfasst von: Yash Agrawal
Trilok Gupta
Publikationsdatum: 20.03.2022
Verlag: Springer Japan
Erschienen in: Journal of Material Cycles and Waste Management / Ausgabe 3/2022
Print ISSN: 1438-4957
Elektronische ISSN: 1611-8227
DOI: https://doi.org/10.1007/s10163-022-01388-8

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3/2022

The clayey quarry sludge from a waste to a valuable raw material for red ceramics

Optimization of process parameters using response surface methodology for maximum liquid yield during thermal pyrolysis of blend of virgin and waste high-density polyethylene

Correction to: Management of food waste in restaurants by way of circular practices

Potential and future prospects of biochar-based materials and their applications in removal of organic contaminants from industrial wastewater

Fly ash bricks development using concrete waste debris and self-healing bacteria

Valorization of marine sediments in geopolymer mortars: physico-mechanical, microstructural and environmental investigations at laboratory scale