nach oben

International Journal of Steel Structures

Erschienen in:

13.06.2023

Fatigue Behavior of High-Performance Steel Beams Subjected to Different Corrosion Conditions

verfasst von: Ying Chai, Jianxin Peng, Linfa Xiao, Xinhua Liu, Jianren Zhang

Erschienen in: International Journal of Steel Structures | Ausgabe 4/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The existing research mainly considers the fatigue properties of steel structures under the influence of the environment, corrosion rate, and load conditions without considering the effect of corrosion locations and areas. However, corrosion can happen to a steel structure in a practical engineering setting at any position. This paper investigates the fatigue behavior of high-performance steel beams (Q550E) subjected to different corrosion conditions through various tests. Results show that the fatigue life of the wholly corroded steel beams decreases as the frequency increases and increases as the stress ratio increases. Additionally, local corrosion has a greater impact on flexural stiffness than whole corrosion, and the lower half area has a greater impact than the right half area. Other corroded steel beams, with the exception of SCU-10, have fracture positions that are within the corrosion area. Because, despite the corrosion in the bending shear section, the fatigue strength of the corrosion area is higher than that of the fracture location. In addition, the degradation curves of the mid-span flexural stiffness of other steel beams under cyclic loading have not observed S-shaped curve characteristics, with the exception of GC-10B and SCU-20.

Vorheriger Artikel Simulation and Modelling for Bending Analysis of Elastically Supported Laminated Plates Under Concentrated Load: A Meshless Approach

Nächster Artikel Explicit Finite Element Formulations for the Free Vibrations and Buckling of Partial-Interaction Composite Beams with Two Sub-components

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Adel, M., Matsumoto, K., Ueda, T., & Nagai, K. (2022). Material comparative analysis of crack-bridging degradation of SFRC structural beams under flexural fatigue loading. Construction and Building Materials, 339.

Albrecht, P., & Lenwari, A. (2009). Fatigue strength of weathered A588 steel beams. Journal of Bridge Engineering, 14(6), 436–443.CrossRef

Bjorhovde, R. (2004). Development and use of high performance steel. Journal of Constructional Steel Research, 60(3–5), 393–400.CrossRef

Cao, Z. (2018). Experimental study on fatigue behavior of concrete beams under the effect of corrosion and fatigue. North China University of Technology.

Cha, H., Liu, B., Prakash, A., & Varma, A. H. (2016). Effect of local damage caused by overweight trucks on the durability of steel bridges. Journal of Performance of Constructed Facilities, 30(1), 04014183.CrossRef

Chen, J., Zhang, H., & Yu, Q. (2021). Monotonic and fatigue behavior of steel-concrete composite beams subjected to corrosion. Structures, 34, 1973–1984.CrossRef

El Maaddawy, T. A., & Soudki, K. A. (2003). Effectiveness of impressed current technique to simulate corrosion of steel reinforcement in concrete. Journal of Materials in Civil Engineering, 15(1), 41–47.CrossRef

Guo, H., Wei, H., Yang, D., Liu, Y., Wang, Z., & Tian, J. (2021). Experimental research on fatigue performance of Q690 high strength steel in marine corrosive environment. China Civil Engineering Journal, 54(5), 36–45. (In Chinese).

Kang, D. H., Lee, J. K., & Kim, T. W. (2011). Corrosion fatigue crack propagation of high-strength steel HSB800 in a seawater environment. Procedia Engineering, 10, 1170–1175.CrossRef

Kayser, J. R., & Nowak, A. S. (1987). Evaluation of corroded steel bridges. ASCE.

Li, L., Li, C., & Mahmoodian, M. (2019). Prediction of fatigue failure of steel beams subjected to simultaneous corrosion and cyclic loading. Structures, 19, 386–393.CrossRef

Liu, F., & Zhou, J. (2018). Experimental research on fatigue damage of reinforced concrete rectangular beam. KSCE Journal of Civil Engineering, 22(9), 3512–3523.CrossRef

Liu, X., Xiao, L., Cai, C. S., Zhang, J., & Wang, L. (2021). Fatigue properties investigation of corroded high-performance steel specimens. Journal of Materials in Civil Engineering, 33(1), 04020410.CrossRef

McAdam, D. J. (1927). Corrosion-fatigue of non-ferrous metals. PROC ASTM, 27, 102–127.

Miki, C., Homma, K., & Tominaga, T. (2002). High strength and high performance steels and their use in bridge structures. Journal of Constructional Steel Research, 58(1), 3–20.CrossRef

Oh, S. J., Cook, D. C., & Townsend, H. E. (1999). Atmospheric corrosion of different steels in marine, rural and industrial environments. Corrosion Science, 41(9), 1687–1702.CrossRef

Peng, J., Xiao, J., Zhou, Y., Liu, X., & Zhang, J. (2022). Experimental study of bending performance of Q550E steel beams subjected to local corrosion. China Journal of Highway and Transport, 35(5), 104–115. (In Chinese).

Rahgozar, R., & Sharifi, Y. (2011). Remaining fatigue life of corroded steel structural members. Advances in Structural Engineering, 14(5), 881–890.CrossRef

Shi, G., Ban, H., Shi, Y., & Wang, Y. (2012). Engineering application and recent research progress on high strength steel structures. Industrial Construction, 42(1), 1–7.

Tohidi, S., & Sharifi, Y. (2016). Load-carrying capacity of locally corroded steel plate girder ends using artificial neural network. Thin-Walled Structures, 100, 48–61.CrossRef

Wang, L. (2019). Experimental study on flexural rigidity of reinforced concrete beams under combined corrosion and fatigue. Changsha University of Science and Technology.

Wang, B., Huang, Q., & Liu, X. (2021). Stiffness degradation and its calculation model for composite beams after fatigue. Journal of Vibration and Shock, 40(6), 265–271. (In Chinese).

Xu, S., Yu, J., & Nie, B. (2021). Surface morphology and mechanical properties of corroded cold-formed steel. Journal of Hunan University (natural Sciences), 48(1), 163–172. (In Chinese).

Yang, D., Yi, T., & Li, H. (2017). Coupled fatigue-corrosion failure analysis and performance assessment of RC bridge deck slabs. Journal of Bridge Engineering, 22(10), 04017077.CrossRef

Yang, Y., Liu, Z., Tang, H., & Peng, J. (2023). Deflection-based failure probability analysis of low shrinkage-creep concrete structures in presence of non-stationary evolution of shrinkage and creep uncertainties. Construction and Building Materials, 376, 131077.CrossRef

Zhang, K., Zhang, J., Jin, W., Mao, J., & Long, J. (2020). Stiffness degradation for fatigue of reinforced concrete beams after electrochemical rehabilitation. Construction and Building Materials, 260(4), 120455.CrossRef

Zhang, W., & Yuan, H. (2014). Corrosion fatigue effects on life estimation of deteriorated bridges under vehicle impacts. Engineering Structures, 71, 128–136.CrossRef

Titel: Fatigue Behavior of High-Performance Steel Beams Subjected to Different Corrosion Conditions
verfasst von: Ying Chai
Jianxin Peng
Linfa Xiao
Xinhua Liu
Jianren Zhang
Publikationsdatum: 13.06.2023
Verlag: Korean Society of Steel Construction
Erschienen in: International Journal of Steel Structures / Ausgabe 4/2023
Print ISSN: 1598-2351
Elektronische ISSN: 2093-6311
DOI: https://doi.org/10.1007/s13296-023-00753-z

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2023

Optimization of the Multi-Level Spring Restrainer for Bridges by Hybrid Particle Swarm and Gravitational Search Algorithm

Exceptional Cross-Tension Property in Resistance Spot Welded 7Mn Steels by Combining Cyclic Heat Treatment and Intercritical Annealing

Numerical Analysis and Load-Carrying Capacity Estimation of Reinforced Concrete Slab Culvert Rehabilitated with a Grouted Corrugated Steel Plate

Shear Performance of Steel Thin Sheet-to-Thick Plate Bolted Connections

Web Crippling Behaviour of Cold-Formed High-Strength Steel Unlipped Channel Beams Under Interior-Two-Flange Load Case

Improvement of Welding Performance on Mild Steel by a Hybrid TIG-MAG Welding Technique

Premium Partner

Marktübersichten