nach oben

Erschienen in:

2017 | OriginalPaper | Buchkapitel

6. Fiber Laser Micro-machining of Engineering Materials

verfasst von : A. Sen, B. Doloi, B. Bhattacharyya

Erschienen in: Non-traditional Micromachining Processes

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In the present era, fiber lasers have been successfully replacing Nd-YAG and CO₂ lasers along with other conventional laser systems for various micro-machining applications such as micro-cutting of stents, thin sheet of ferrous and non-metals in terms of cutting speed, cut edge quality and the length of micro cracks. The usage of fiber laser can also be observed in field of micro-machining of various engineering materials owing to the characteristics of short pulse lengths which range from millisecond to picosecond or even femtosecond. The present chapter aims to carry out an in depth study of the fiber laser micro-machining, i.e., micro-cutting, micro-drilling, engraving, marking, etc., of engineering materials ranging from polymer to ceramics. The aim of the chapter is also to include an overall concept of fiber laser micro-machining system in the present scenario and its applications along with the occurring physical phenomena and influence of various process parameters on the fiber laser generated micro-features.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Laser Micro-turning Process of Aluminium Oxide Ceramic Using Pulsed Nd:YAG Laser

Nächstes Kapitel Laser Beam Micro-cutting

J. D. Majumdar and I. Manna (2013), Introduction to Laser-Assisted Fabrication of Materials, Laser assisted fabrication of materials, Springer series in material science, Springer-Verlag, 1–68.

R. D. Schaeffer (2012), Fundamentals of laser micromachining, CRC Press, Taylor & Francis Group, 5–36.

A. K. Nath (2013), High Power Lasers in Material Processing Applications: An Overview of Recent Developments, Laser assisted fabrication of materials, Springer series in material science, Springer-Verlag, 69–112.

R. Stępień, M. Franczyk, D. Pysz, I. Kujawa, M. Klimczak and R. Buczyński (2014), Ytterbium-Phosphate Glass for Microstructured Fiber Laser, Materials 2014, 7, 4723–4738.

M. Tagliaferri, F. Cannone and D. Nolli (2015), Pulsed fiber laser with double- pass pumping, US 20150010025 A1, Jan 2015.

R. G. Smith (1972), Optical power handling capacity of low loss optical fibers as determined by stimulated Raman and Brillouin scattering, Applied Optics, 11, 2489–2494.

S. Woods (2009), Understanding materials processing lasers- a comprehensive overview covering the capabilities and applicability of the major systems, Laser Technik Journal, Willey online Library, 6: 5, 23–26.

M.L. Stock, A. Galvanauskas, M.E. Fermann, G. Mourou and D. Harter (1993), Generation of high-power femtosecond optical pulses by chirped pulse amplification in erbium doped fibers. Pro. Opt. Soc. Am. Top. Meeting on Nonlinear Guided Wave Phenomena (OSA).

M. E. Fermann and I. Hartl (2013), Ultrafast fibre lasers, Review articles focus, Nature photonics, DOI:10.1038/NPHOTON.2013.280.

10.

L. Dong and M. E. Fermann (2011), Introduction to optical fiber lasers, High power laser handbook, McGraw-Hill, ISBN: 978-0-07-160902-9, 413-461.

11.

M. Naeem, Choice of laser sources for micro-machining applications, SPI Lasers, http://www.spilasers.com/whitepapers/choice-of-laser-sources-for-micromachining applications/.

12.

D. Teixidor, F. Orozco, T. Thepsonthi (2013), Effect of process parameters in nanosecond pulsed laser micromachining of PMMA-based microchannels at near-infrared and ultraviolet wavelengths, The International Journal of Advanced Manufacturing Technology, 67 (5), 1651–1664.

13.

J. Meijer (2002), Laser micromachining, Micromachining of engineering materials. USA: Marcel Dekker, 203–238.

14.

A. Sen, B. Doloi and B. Bhattacharyya (2015), Fiber laser micro-machining of Ti-6Al-4 V, Lasers Based Manufacturing: 5th International and 26th All India Manufacturing Technology, Design and Research Conference, AIMTDR 2014, Springer India, 255–281.

15.

F. O. Olsen, K. S. Hansen, and J. S. Nielsen (2009), Multibeam fiber laser cutting. Journal of Laser Applications, 21, 133.

16.

K.F. Kleine and K.G. Watkins (2003), Fiber laser for micro cutting of metals. Proc. SPIE 4974, 185.

17.

H. Meng, J. Liao and Y. Zhou (2009), Laser micro-processing of cardiovascular stent with fiber laser cutting system. Optics of Laser Technology, 41(3), 300–302.

18.

W.P. Risk, T. R. Gosnell and A. V. Nurmikko (2003), Compact blue-green lasers, Cambridge University Press, Cambridge, 1–19.

19.

C.H. Fu, J.F. Liu and A. Guo (2015), Statistical characteristics of surface integrity by fiber laser cutting of Nitinol vascular stents. Applied Surface Science. 353, 291–299.

20.

Y. Okamoto, N. Kataoka, H. Tahara, K. Shiwayama and Y. Uno (2006), Micro cutting of thin copper plate by fiber laser with laval nozzle, Journal of Laser Micro/Nanoengineering, 1, 3.

21.

H. Niino, Y. Kawaguchi, T. Sato, A. Narazaki, R. Kurosaki, M. Muramatsu, Y. Harada, K. Wakabayashi, T. Nagashima, Z. Kase, M. Matsushita, K. Furukawa and M. Nishino (2013), Laser Cutting of Carbon Fiber Reinforced Plastics (CFRP) by Fiber Laser Irradiation, Conference on Lasers and Electro-Optics/Pacific Rim, ISBN: 978-1-4673-6475-1.

22.

J.B. Lecourt, C. Duterte, F. Liegeois, D. Lekime and Y. Hernandez (2012), High-power ultrashort fiber laser for solar cells micromachining, Proc. SPIE8237, Fiber Lasers IX: Technology, Systems, and Applications, 823738, DOI:10.1117/12.907951.

23.

P. Deladurantaye, A. Cournoyer, M. Drolet, L. Desbiens and D. Lemieux (2011), Material micromachining using bursts of high repetition rate picosecond pulses from a fiber laser source, Proc. SPIE 7914, Fiber Lasers VIII: Technology, Systems, and Applications, 791404, DOI:10.1117/12.875265.

24.

Toru Mizunami and and A. Ehara (2011), Femtosecond-pulsed laser micromachining and optical damage by an erbium-doped fiber-laser system, Proceedings of the 36th International Conference on Micro- and Nano-Engineering (MNE), 36th International Conference on Micro- and Nano-Engineering (MNE), Microelectronic Engineering, 88(8), 2334–2337.

25.

H. Qi and H. Lai (2012), Micromachining of metals and thermal barrier coatings using a 532 nm nanosecond fiber laser, Physics Procedia, Laser Assisted Net shape Engineering 7, 39, 603–612.

26.

YP. Kathuria (2003), Biocompatible metallic stent for medical therapy. SPIE, 5287:52–61.

27.

L. Liu, D. B. Li, Y. F.Tong and Y.F.Zh (2016), Applied Physics A, 122:638, DOI 10.1007/s00339-016-0170-0.

28.

N. Muhammad, D. Whitehead, A. Boor and L. Li (2010), Comparison of dry and wet fibre laser profile cutting of thin 316L stainless steel tubes for medical device applications, Journal of Materials Processing Technology, 210, 15, 2261–2267.

29.

W.C. Choi and G. Chryssolouris (1995), Analysis of the laser grooving and cutting processes, J. Phys., Appl. Phys, 28, 873–878.

30.

C.A. Biffi and A. Tuissi (2016), Micro-processing of NiMnGa shape memory alloy by using a nanosecond fiber laser, Optics &LaserTechnology, 78, 42–49.

31.

A. Sen, B. Doloi and B. Bhattacharyya (2016), Fibre laser micro-channeling of PMMA, Lasers in Engineering, 35, 1–4, 123–138.

32.

A. Sen, B. Doloi and B. Bhattacharyya (2015), Effect of process parameters on IR fiber laser micro-machining of PMMA, International Conference on Precision, Meso, Micro and Nano Engineering, IIT Bombay, India, 10–12 December 2015, 1–6.

33.

C.A. Biffi, N. Lecis, B. Previtali, M. Vedani and G. M. Vimercati (2011), Fiber laser microdrilling of titanium and its effect on material microstructure; International journal of Advanced Manufacturing Technology, 54:149–160, DOI 10.1007/s00170-010-2918-6.

34.

A. Ancona, D. Nodop, J. Limpert, S. Nolte and A. Tünnermann (2009), Microdrilling of metals with an inexpensive and compact ultra-short-pulse fiber amplified microchip laser, Applied Physics A, 94: 19–24, DOI 10.1007/s00339-008-4906-3.

35.

A. Ghosal and A. Manna (2013), Response surface method based optimization of ytterbium fiber laser parameter during machining of Al/Al₂O₃-MMC, Optics and Laser Technology, 46, 67–76.

36.

H. Huang, L-M. Yang and J. Liu (2014), Micro-hole drilling and cutting using femtosecond fiber laser, Optical Engineering, 53 (5), 051513.

37.

B. Adelmann and R. Hellmann (2015), Rapid micro hole laser drilling in ceramic substrates using singlemode fiber laser, Journal of Materials Processing Technology, 221, 80–86.

38.

S. Genna, C. Leone, V. Lopresto, L. Santo and F. Trovalusci (2010), Study of fibre laser machining of C45 steel: influence of process parameters on material removal rate and roughness, International Journal of Material Forming, 1, 1115–1118.

39.

F. Tagliaferria, N. Paganob, C. Leoneb, B. Palumbo, Statistical analysis of fiber laser machining of titanium alloy, https://www.researchgate.net/publication/267411159.

40.

O. F. Biswas, A. Sen, G. Kibria, B. Doloi and B. Bhattacharyya (2016), Experimental investigation into spiral micro-grooving on aluminium using fiber laser, Proceedings of 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016), College of Engineering, India, 16–18 December, 411–415.

41.

A. Astarita, S. Genna, C. Leone, F.M.C. Minutolo, A. Squillace and C. Velotti (2016), Study of the laser marking process of cold sprayed titanium coatings on aluminium substrates, Optics & Laser Technology, 83, 168–176.

Titel: Fiber Laser Micro-machining of Engineering Materials
verfasst von: A. Sen
B. Doloi
B. Bhattacharyya
Verlag: Springer International Publishing
Buch: Non-traditional Micromachining Processes
Print ISBN: 978-3-319-52008-7

Electronic ISBN: 978-3-319-52009-4

Copyright-Jahr: 2017
DOI: https://doi.org/10.1007/978-3-319-52009-4_6

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht