Skip to main content
Fachgebiete
Automobil + Motoren Bauwesen + Immobilien Business IT + Informatik Elektrotechnik + Elektronik Energie + Nachhaltigkeit Finance + Banking Management + Führung Marketing + Vertrieb Maschinenbau + Werkstoffe Versicherung + Risiko
DE
EN
Themenseiten
Organisationspsychologie Projektmanagement Marketing Smart Manufacturing
Bücher
Zeitschriften
Weitere Formate
Podcasts Webinare Technik Webinare Wirtschaft Kongresse Veranstaltungskalender Awards
Jetzt Einzelzugang starten
Zugang für Unternehmen
Referenzkunden
ATZ-Fachkongress

Chassis.tech plus 2024


4 Kongresse in einer Veranstaltung

Treffen Sie in München die Fachleute von Chassis, Lenkung, Bremsen sowie Reifen/Räder.
Erweiterte Suche
Anmelden
nach oben
Polymer Bulletin
Erschienen in: Polymer Bulletin 2/2023

11.02.2022 | Review Paper

Filament-wound glass-fibre reinforced polymer composites: Potential applications for cross arm structure in transmission towers

verfasst von: M. R. M. Asyraf, M. R. Ishak, Agusril Syamsir, A. L. Amir, N. M. Nurazzi, M. N. F. Norrrahim, Mochamad Asrofi, M. Rafidah, R. A. Ilyas, Mohamad Zakir Abd Rashid, M. R. Razman

Erschienen in: Polymer Bulletin | Ausgabe 2/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

This manuscript reviews previous literature on filament-wound polymer composites and their potential applications as cross arm structures in latticed transmission towers. The current trends of cross arms implement pultruded glass fibre-reinforced polymer composites without any additional configurations. However, extreme tropical climate and dynamic wind loads can cause a high risk of sudden failure due to creep, followed by laminate crack propagation, which can induce structural failure. Glass fibre-reinforced polymer composites are more resilient in corrosion resistance, strength, extreme conditions, and life serviceability according to previous literature. The composite can also function as a good insulator in lightning impulse strength of composite cross arms. It is suggested that the current cross arm design has to adopt core structure as reinforcement to the structure by using filament winding process for long-term structures. Hence, the composite structure can withstand extreme environmental conditions via the filament winding process. Thus, this manuscript is expected to deliver a state-of-art review on the manufacturing process, perspectives, and potential of filament-wounded composite as cross arms in transmission towers.
Nächster Artikel A review on synthesis and applications of polyaniline and polypyrrole hydrogels

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Jetzt informieren
Literatur
1.
Asyraf MRM, Ishak MR, Sapuan SM, Yidris N (2021) Utilization of bracing arms as additional reinforcement in pultruded glass fiber-reinforced polymer composite cross-arms: creep experimental and numerical analyses. Polymers (Basel) 4:620CrossRef
2.
Asyraf MRM, Ishak MR, Sapuan SM, Yidris N (2021) Influence of additional bracing arms as reinforcement members in wooden timber cross-arms on their long-term creep responses and properties. Appl Sci 5:2061CrossRef
3.
Nadhirah A, Mohamad D, Zainoodin M, Nabihah S, Mubin N et al (2017) Properties of fiberglass crossarm in transmission tower-a review. Int J Appl Eng Res 24:15228–15233
4.
Nurazzi NM, Asyraf MRM, Khalina A, Abdullah N, Aisyah HA et al (2021) A Review on natural fiber reinforced polymer composite for bullet proof and ballistic applications. Polymers 4:646CrossRef
5.
Mohd Nurazzi NM, Muhammad Asyraf MRM, Khalina A, Abdullah N, Sabaruddin FA et al (2021) Fabrication, functionalization, and application of carbon nanotube-reinforced polymer composite: an overview. Polymers (Basel) 7:1047CrossRef
6.
Zhu Y, Wang L, Yu J, Fang J (2017) Optimal insulation design for new-type transmission tower with composite cross-arm. In: Proceedings of the international symposium on electrical insulating materials, vol 2, Toyohashi, Japan, pp 578–581
7.
Abd Rahman MS, Ab Kadir MZA, Ab-Rahman MS, Osman M, Mohd Nor SF et al (2020) Effects of a crossarm brace application on a 275 kV fiberglass-reinforced polymer crossarm subjected to a lightning impulse. Energies 23:6248CrossRef
8.
Rawi IM, Rahman MSA, Ab Kadir MZA, Izadi M (2017) Wood and fiberglass crossarm performance against lightning strikes on transmission towers. In: International conference on power systems transient (IPST), Seoul, Republic of Korea, pp 1–6
9.
Ilyas RA, Zuhri MYM, Norrrahim MNF, Misenan MSM, Jenol MA et al (2022) Natural fiber-reinforced polycaprolactone green and hybrid biocomposites for various advanced applications. Polymers (Basel) 14:182CrossRef
10.
Asyraf MRM, Rafidah M, Ishak MR, Sapuan SM, Yidris N et al (2020) Integration of TRIZ, morphological chart and ANP method for development of FRP composite portable fire extinguisher. Polym Compos 7:2917–2932CrossRef
11.
Omran AAB, Mohammed AABA, Sapuan SM, Ilyas RA, Asyraf MRM et al (2021) Micro- and nanocellulose in polymer composite materials: a review. Polymers (Basel) 2:231CrossRef
12.
Asyraf MRM, Rafidah M, Azrina A, Razman MR (2021) Dynamic mechanical behaviour of kenaf cellulosic fibre biocomposites: a comprehensive review on chemical treatments. Cellulose 5:2675–2695CrossRef
13.
Azman MA, Asyraf MRM, Khalina A, Petrů M, Ruzaidi CM et al (2021) Natural Fiber reinforced composite material for product design: a short review. Polymers (Basel) 12:1917CrossRef
14.
Ilyas RA, Sapuan SM, Asyraf MRM, Dayana DAZN, Amelia JJN et al (2021) Polymer composites filled with metal derivatives: a review of flame retardants. Polymers (Basel) 13:1701CrossRef
15.
Ilyas RA, Sapuan SM, Harussani MM, Hakimi MYAY, Haziq MZM et al (2021) Polylactic acid (PLA) biocomposite: processing. Addit Manuf Adv Appl Polym (Basel) 8:1326
16.
Nurazzi NM, Sabaruddin FA, Harussani MM, Kamarudin SH, Rayung M et al (2021) Mechanical performance and applications of CNTs reinforced polymer composites—a review. Nanomaterials 9:2186CrossRef
17.
Nurazzi NM, Asyraf MRM, Rayung M, Norrrahim MNF, Shazleen SS et al (2021) Thermogravimetric analysis properties of cellulosic natural fiber polymer composites: a review on influence of chemical treatments. Polymers (Basel) 16:2710CrossRef
18.
Nurazzi NM, Asyraf MRM, Fatimah Athiyah S, Shazleen SS, Rafiqah SA et al (2021) A review on mechanical performance of hybrid natural fiber polymer composites for structural applications. Polymers (Basel) 13:2170CrossRef
19.
Amir AL, Ishak MR, Yidris N, Zuhri MYM, Asyraf MRM (2021) Potential of honeycomb-filled composite structure in composite cross-arm component: a review on recent progress and its mechanical properties. Polymers (Basel) 8:1341CrossRef
20.
Asyraf MRM, Ishak MR, Norrrahim MNF, Nurazzi NM, Shazleen SS et al (2021) Recent advances of thermal properties of sugar palm lignocellulosic fibre reinforced polymer composites. Int J Biol Macromol 193:1587–1599CrossRef
21.
Alias AH, Norizan MN, Sabaruddin FA, Asyraf MRM, Norrrahim MNF et al (2021) Hybridization of MMT/lignocellulosic fiber reinforced polymer nanocomposites for structural applications: a review. Coatings 11:1355CrossRef
22.
Zhu JJ, Schoenoff MS (2018) Effects of natural sunlight on fiberglass reinforced polymers for crossarms. In: IEEE rural electric power conference (REPC), Memphis, pp 101–105
23.
Wang Y, Zhupanska OI (2015) Lightning strike thermal damage model for glass fiber reinforced polymer matrix composites and its application to wind turbine blades. Compos Struct 132:1182–1191CrossRef
24.
Asyraf MRM, Ishak MR, Sapuan SM, Yidris N (2021) Comparison of static and long-term creep behaviors between balau wood and glass fiber reinforced polymer composite for cross-arm application. Fibers Polym 3:793–803CrossRef
25.
Asyraf MRM, Ishak MR, Sapuan SM, Yidris N, Rafidah M et al (2020) Potential application of green composites for cross arm component in transmission tower: a brief review. Int J Polym Sci 2020:8878300CrossRef
26.
Ilyas R, Sapuan S, Atikah M, Asyraf M, Rafiqah SA et al (2021) Effect of hydrolysis time on the morphological, physical, chemical, and thermal behavior of sugar palm nanocrystalline cellulose (Arenga pinnata (Wurmb.) Merr ). Text Res J 1–2:152–167CrossRef
27.
Alsubari S, Zuhri MYM, Sapuan SM, Ishak MR, Ilyas RA et al (2021) Potential of natural fiber reinforced polymer composites in sandwich structures: a review on its mechanical properties. Polymers (Basel) 3:423CrossRef
28.
Asyraf MRM, Ishak MR, Sapuan SM, Yidris N (2019) Conceptual design of creep testing rig for full-scale cross arm using TRIZ-morphological chart-analytic network process technique. J Mater Res Technol 6:5647–5658CrossRef
29.
Asyraf MRM, Ishak MR, Sapuan SM, Yidris N, Ilyas RA et al (2020) Evaluation of design and simulation of creep test rig for full-scale cross arm structure. Adv Civ Eng 2020:6980918
30.
Asyraf MRM, Ishak MR, Sapuan SM, Yidris N (2020) Conceptual design of multi-operation outdoor flexural creep test rig using hybrid concurrent engineering approach. J Mater Res Technol 2:2357–2368CrossRef
31.
Johari AN, Ishak MR, Leman Z, Yusoff MZM, Asyraf MRM (2020) Influence of CaCO3 in pultruded glass fibre/unsaturated polyester composite on flexural creep behaviour using conventional and TTSP methods. Polimery 10:46–54
32.
Johari AN, Ishak MR, Leman Z, Yusoff MZM, Asyraf MRM (2020) Creep behaviour monitoring of short-term duration for fiber-glass reinforced composite cross-arms with unsaturated polyester resin samples using conventional analysis. J Mech Eng Sci 4:7361–7368CrossRef
33.
Sharaf HK, Ishak MR, Sapuan SM, Yidris N, Fattahi A (2020) Experimental and numerical investigation of the mechanical behavior of full-scale wooden cross arm in the transmission towers in terms of load-deflection test. J Mater Res Technol 4:7937–7946CrossRef
34.
Sharaf HK, Ishak MR, Sapuan SM, Yidris N (2020) Conceptual design of the cross-arm for the application in the transmission towers by using TRIZ–morphological chart-ANP methods. J Mater Res Technol 4:9182–9188CrossRef
35.
Qaiss A, Bouhfid R, Essabir H (2015) Effect of processing conditions on the mechanical and morphological properties of composites reinforced by natural fibres. In: Salit MS, Jawaid M, Yusoff NB, Hoque ME (eds) Manufacturing of natural fibre reinforced polymer composites, pp 177–197
36.
Onder A, Sayman O, Dogan T, Tarakcioglu N (2009) Burst failure load of composite pressure vessels. Compos Struct 1:159–166CrossRef
37.
Quanjin M, Rejab MRM, Kaige J, Idris MS, Harith MN (2018) Filament winding technique, experiment and simulation analysis on tubular structure. IOP Conf Ser Mater Sci Eng 342:012029CrossRef
38.
Khennane A (2013) Filament winding processes in the manufacture of advanced fibre-reinforced polymer (FRP) composites. Advanced fibre-reinforced polymer (FRP) composites for structural applications. Woodhead Publishing, Sawston, pp 187–206CrossRef
39.
Guo K, Wen L, Xiao J, Lei M, Wang S et al (2020) Design of winding pattern of filament-wound composite pressure vessel with unequal openings based on non-geodesics. J Eng Fiber Fabr 15:1–17
40.
Päßler M, Schledjewski R (2012) Filament winding with increased efficiency. Inst für Verbundwerkstoffe GmbH, Kaiserslautern
41.
Tele D, Wakhare N, Bhosale R, Bharde P, Nerkar S (2016) A review on design and development of filament winding machine for composite materials. Int J Curr Eng Technol 6:74–77
42.
Quanjin M, Rejab M, Sahat I, Amiruddin M, Bachtiar D et al (2018) Design of portable 3-axis filament winding machine with inexpensive control system. J Mech Eng Sci 1:3479–3493CrossRef
43.
Santos RAM, Reis PNB, Silva FGA, de Moura MFSF (2017) Influence of inclined holes on the impact strength of CFRP composites. Compos Struct 172:130–136CrossRef
44.
Ang JY, Abdul Majid MS, Mohd Nor A, Yaacob S, Ridzuan MJM (2018) First-ply failure prediction of glass/epoxy composite pipes using an artificial neural network model. Compos Struct 200:579–588CrossRef
45.
Rafiee R (2013) Experimental and theoretical investigations on the failure of filament wound GRP pipes. Compos Part B Eng 1:257–267CrossRef
46.
Taşyürek M, Tarakçioğlu N (2017) Enhanced fatigue behavior under internal pressure of CNT reinforced filament wound cracked pipes. Compos Part B Eng 124:23–30CrossRef
47.
Conder RL, Newhouse NL (1980) Cyclic pressure test of a filament-wound vessel containing liquid nitrogen. Cryogenics (Guildf) 12:697–701CrossRef
48.
Frost SR, Cervenka A (1994) Glass fibre-reinforced epoxy matrix filament-wound pipes for use in the oil industry. Compos Manuf 2:73–81CrossRef
49.
Gemi L, Kayrıcı M, Uludağ M, Gemi DS, Şahin ÖS (2018) Experimental and statistical analysis of low velocity impact response of filament wound composite pipes. Compos Part B Eng 149:38–48CrossRef
50.
Hu JH, Sun MQ, Li J, Wang YJ (2018) Mechanical performances and evolution of stiffness of thin-walled strain hardening cement-based composites pipes during cyclic loading. Constr Build Mater 184:400–407CrossRef
51.
Rafiee R, Habibagahi MR (2018) Evaluating mechanical performance of GFRP pipes subjected to transverse loading. Thin-Walled Struct 131:347–359CrossRef
52.
Kara M, Uyaner M, Avci A, Akdemir A (2014) Effect of non-penetrating impact damages of pre-stressed GRP tubes at low velocities on the burst strength. Compos Part B Eng 60:507–514CrossRef
53.
Manoj Prabhakar M, Rajini N, Ayrilmis N, Mayandi K, Siengchin S et al (2019) An overview of burst, buckling, durability and corrosion analysis of lightweight FRP composite pipes and their applicability. Compos Struct 230:111419CrossRef
54.
Colombo C, Vergani L (2018) Optimization of filament winding parameters for the design of a composite pipe. Compos Part B Eng 148:207–216CrossRef
55.
Khan Z, Naik MK (2016) Low velocity impact of filament-wound glass-fiber reinforced composite pipes. J Mater Sci Eng 5(4):1–5
56.
Shen FC (1995) A filament-wound structure technology overview. Mater Chem Phys 2:96–100CrossRef
57.
Abdalla FH, Mutasher SA, Khalid YA, Sapuan SM, Hamouda AMS et al (2007) Design and fabrication of low cost filament winding machine. Mater Des 1:234–239CrossRef
58.
Rousseau J, Perreux D, Verdière N (1999) The influence of winding patterns on the damage behaviour of filament-wound pipes. Compos Sci Technol 9:1439–1449CrossRef
59.
Zhang B, Xu H, Zu L, Li D, Zi B et al (2018) Design of filament-wound composite elbows based on non-geodesic trajectories. Compos Struct 189:635–640CrossRef
60.
Supian ABM, Sapuan SM, Zuhri MYM, Zainudin ES, Ya HH et al (2021) Effect of winding orientation on energy absorption and failure modes of filament wound kenaf/glass fibre reinforced epoxy hybrid composite tubes under intermediate-velocity impact (IVI) load. J Mater Res Technol 10:1–14CrossRef
61.
Supian ABM, Sapuan SM, Zuhri MYM, Zainudin ES, Ya HH (2020) Crashworthiness performance of hybrid kenaf/glass fiber reinforced epoxy tube on winding orientation effect under quasi-static compression load. Def Technol 5:1051–1061CrossRef
62.
Zhang XW, Su H, Yu TX (2009) Energy absorption of an axially crushed square tube with a buckling initiator. Int J Impact Eng 3:402–417CrossRef
63.
Oshkovr SA, Taher ST, Oshkour AA, Ariffin AK, Azhari CH (2013) Finite element modelling of axially crushed silk/epoxy composite square tubes. Compos Struct 95:411–418CrossRef
64.
Abu Bakar MS, Salit MS, Mohamad Yusoff MZ, Zainudin ES, Ya HH (2020) The crashworthiness performance of stacking sequence on filament wound hybrid composite energy absorption tube subjected to quasi-static compression load. J Mater Res Technol 1:654–666CrossRef
65.
Yan L, Chouw N (2013) Crashworthiness characteristics of flax fibre reinforced epoxy tubes for energy absorption application. Mater Des 51:629–640CrossRef
66.
Morozov EV (2006) The effect of filament-winding mosaic patterns on the strength of thin-walled composite shells. Compos Struct 76(1–2):123–129CrossRef
67.
Zu L, Xu H, Wang H, Zhang B, Zi B (2019) Design and analysis of filament-wound composite pressure vessels based on non-geodesic winding. Compos Struct 207:41–52CrossRef
68.
Geng P, Xing J, Wang Q (2021) Analytical model for stress and deformation of multiple-winding-angle filament-wound composite pipes/vessels under multiple combined loads. Appl Math Model 94:576–596CrossRef
69.
Cui Z, Liu Q, Sun Y, Li Q (2020) On crushing responses of filament winding CFRP/aluminum and GFRP/CFRP/aluminum hybrid structures. Compos Part B Eng 200:108341CrossRef
70.
Kamal NLM, Beddu S, Syamsir A, Mohammad D, Itam Z et al (2019) Immobilization of heavy metals for building materials in the construction industry-an overview. Mater Today Proc 17:787–791CrossRef
71.
Supian ABM, Sapuan SM, Jawaid M, Zuhri MYM, Ilyas RA et al (2021) Crashworthiness response of filament wound kenaf/glass fibre-reinforced epoxy composite tubes with influence of stacking sequence under intermediate-velocity impact load. Fibers Polym 23:222–233CrossRef
72.
Fleischer J, Schaedel J (2013) Joining automotive space frame structures by filament winding. CIRP J Manuf Sci Technol 2:98–101CrossRef
73.
Stedile Filho P, Almeida JHS, Amico SC (2018) Carbon/epoxy filament wound composite drive shafts under torsion and compression. J Compos Mater 8:1103–1111CrossRef
74.
Kassapoglou C (2010) Design and analysis of composite structures: with applications to aerospace structures, 2nd edn. Wiley, West SussexCrossRef
75.
Del Pero F, Delogu M, Kerschbaum M (2020) Design of a lightweight rear crash management system in a sustainable perspective. Sustain 12(13):5243CrossRef
76.
Tian X, Liu T, Yang C, Wang Q, Li D (2016) Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites. Compos Part A Appl Sci Manuf 88:198–205CrossRef
77.
Ilyas RA, Zuhri MYM, Aisyah HA, Asyraf MRM, Hassan SA et al (2022) Natural fiber-reinforced polylactic acid, polylactic acid blends and their composites for advanced applications. Polymers (Basel) 14:202CrossRef
78.
Das M, Sahu S, Parhi DR (2020) Composite materials and their damage detection using AI techniques for aerospace application: a brief review. Mater Today Proc 44:955–960CrossRef
79.
Soutis C (2019) Aerospace engineering requirements in building with composites. In: Erviring PE, Soutis C (eds) Polymer composites in the aerospace industry. Elsevier, Amsterdam, pp 3–22
80.
Zu L, Xu H, Zhang B, Li D, Zi B et al (2018) Design and production of filament-wound composite square tubes. Compos Struct 191:202–208CrossRef
81.
Rajendra Prasad K, Syamsundar C (2019) Theoretical and FE analysis of epoxy composite pressure cylinder used for aerospace applications. Mater Today Proc 19:A1–A9CrossRef
82.
Chaikittiratana A, Pornpeerakeat S, Suwanpakpraek K, Limrungruengrat S, Dietz-Röthlingshöfer J (2020) Bicycle frame from hemp fibre filament wound composites. Technol Light Struct 3:42–49
83.
Jois KC, Welsh M, Gries T, Sackmann J (2021) Numerical analysis of filament wound cylindrical composite pressure vessels accounting for variable dome contour. J Compos Sci 2:56CrossRef
84.
Sulaiman S, Borazjani S, Tang SH (2013) Finite element analysis of filament-wound composite pressure vessel under internal pressure. IOP Conf Ser Mater Sci Eng 50:012061CrossRef
85.
Friedrich K, Glienke N, Flöck J, Haupert F, Paipetis SA (2002) Reinforcement of damaged concrete columns by filament winding of thermoplastic composites. Polym Polym Compos 4:273–279
86.
Mosallam AS (2014) Polymer composites in construction: an overview. SOJ Mater Sci Eng 1:01–25CrossRef
87.
Asyraf MRM, Ishak MR, Syamsir S, Nurazzi NM, Sabaruddin FA et al (2022) Mechanical properties of oil palm fibre-reinforced polymer composites: a review. J Mater Res Technol 17:33–65CrossRef
88.
Beddu S, Syamsir A, Arifin Z, Ishak M (2018) Creep behavior of glass fibre reinforced polymer structures in crossarms transmission line towers. In: AIP conference proceedings, vol 020039
89.
Itam Z, Ishak ZAM, Yusof ZM, Salwi N, Zainoodin M (2018) Effect on the temperature behavior of glass fiber reinforced polymer (GFRP) in various application-a review. AIP Conf Proc, pp 1–5
90.
Hashim SA, Nisar JA (2013) An investigation into failure and behaviour of GFRP pultrusion joints. Int J Adhes Adhes 40:80–88CrossRef
91.
Singh S, Kumar V (2017) Review of current technology in glass fibre composite. Int J Mech Prod Eng Res Dev 4:109–118
92.
Mohamad D, Syamsir A, Beddu S, Abas A, Ng FC et al (2019) Numerical study of composite fiberglass cross arms under statics loading and improvement with sleeve installation. IOP Conf Ser Mater Sci Eng 530:012027CrossRef
93.
Sharma SD, Sowntharya L (2016) Kar KK (2016) Polymer-based composite structures: processing and applications. In: Kar KK (ed) Composite materials: processing, applications, characterizations, 1st edn. Springer, Berlin, pp 1–36
94.
Yeh HY, Yang SC (1997) Building of a composite transmission tower. J Reinf Plast Compos 5:414–424CrossRef
95.
Baran I, Tutum CC, Nielsen MW, Hattel JH (2013) Process induced residual stresses and distortions in pultrusion. Compos Part B Eng 51:148–161CrossRef
96.
Syamsir A, Mohamad D, Beddu S, Itam Z, Sadon SN (2019) A review on durability and degradation of glass fiber reinforced polymer structures. Int J Adv Sci Technol 10:218–226
97.
Zafar A, Bertocco F, Schjødt-Thomsen J, Rauhe JC (2012) Investigation of the long term effects of moisture on carbon fibre and epoxy matrix composites. Compos Sci Technol 6:656–666CrossRef
98.
Ray BC (2006) Temperature effect during humid ageing on interfaces of glass and carbon fibers reinforced epoxy composites. J Colloid Interface Sci 1:111–117CrossRef
99.
Correia J, Cabral-Fonseca S (2005) Durability of glass fibre reinforced polyester (GFRP) pultruded profiles used in civil engineering applications. Third Int Conf Compos Constr i:1–9
100.
Agusril ST, Nor NM, Zaidi AMA (2012) Failure analysis of carbon fiber reinforced polymer (CFRP) bridge using composite material failure theories. Adv Mater Res 488:525–529CrossRef
101.
Sousa JM, Correia JR, Firmo JP, Cabral-Fonseca S, Gonilha J (2018) Effects of thermal cycles on adhesively bonded joints between pultruded GFRP adherends. Compos Struct 202:518–529CrossRef
102.
Turon A, Costa J, Camanho PP, Dávila CG (2007) Simulation of delamination in composites under high-cycle fatigue. Compos Part A Appl Sci Manuf 11:2270–2282CrossRef
103.
Li H, Yao Y, Guo L, Zhang Q, Wang B (2018) The effects of delamination deficiencies on compressive mechanical properties of reinforced composite skin structures. Compos Part B Eng 155:138–147CrossRef
104.
Asyraf MRM, Ishak MR, Sapuan SM, Yidris N, Ilyas RA (2020) Woods and composites cantilever beam: a comprehensive review of experimental and numerical creep methodologies. J Mater Res Technol 3:6759–6776CrossRef
105.
Lee CS, Hwang W, Park HC, Han KS (1999) Failure of carbon/epoxy composite tubes under combined axial and torsional loading 1 experimental results and prediction of biaxial strength by the use of neural networks. Compos Sci Technol 12:1779–1788CrossRef
106.
Cardoso DCT, Togashi BS (2018) Experimental investigation on the flexural-torsional buckling behavior of pultruded GFRP angle columns. Thin-Walled Struct 125:269–280CrossRef
107.
Chin JW, Nguyen T, Aouadi K (1997) Effects of environmental exposure on fiber-reinforced plastic (FRP) materials used in construction. J Compos Technol Res 4:205–213
108.
Rodrigues LPS, Silva RV, Aquino EMF (2012) Effect of accelerated environmental aging on mechanical behavior of curaua/glass hybrid composite. J Compos Mater 17:2055–2064CrossRef
109.
Wang W, Sain M, Cooper PA (2006) Study of moisture absorption in natural fiber plastic composites. Compos Sci Technol 3–4:379–386CrossRef
110.
Karbhari VM, Chin JW, Hunston D, Benmokrane B, Juska T et al (2003) Durability gap analysis for fiber-reinforced polymer composites in civil infrastructure. J Compos Constr 3:238–247CrossRef
111.
Kasturiarachchi KA, Pritchard G (1983) Water absorption of glass/epoxy laminates under bending stresses. Composites 3:244–250CrossRef
112.
Xin H, Liu Y, Mosallam A, Zhang Y (2016) Moisture diffusion and hygrothermal aging of pultruded glass fiber reinforced polymer laminates in bridge application. Compos Part B Eng 100:197–207CrossRef
113.
Hu Y, Li X, Lang AW, Zhang Y, Nutt SR (2016) Water immersion aging of polydicyclopentadiene resin and glass fiber composites. Polym Degrad Stab 124:35–42CrossRef
114.
Cardoso DCT, Harries KA, Batista EDM (2014) Compressive strength equation for GFRP square tube columns. Compos Part B Eng 59:1–11CrossRef
115.
Amir AL, Ishak MR, Yidris N, Zuhri MYM, Asyraf MRM (2021) Advances of composite cross arms with incorporation of material core structures: manufacturability, recent progress and views. J Mater Res Technol 13:1115–1131CrossRef
116.
Ali SSS, Razman MR, Awang A, Asyraf MRM, Ishak MR et al (2021) Critical determinants of household electricity consumption in a rapidly growing city. Sustainability 13:4441CrossRef
117.
Roslan ZB, Ramli Z, Razman MR, Asyraf MRM, Ishak MR et al (2021) Reflections on local community identity by evaluating heritage sustainability protection in Jugra, Selangor, Malaysia. Sustainability 16:8705CrossRef
118.
Ali SSS, Razman MR, Awang A (2020) The estimation and relationship of domestic electricity consumption and appliances ownership in Malaysia’s intermediate city. Int J Energy Econ Policy 6:116–122CrossRef
119.
Ali SSS, Razman MR, Awang A (2020) The nexus of population, GDP growth, electricity generation, electricity consumption and carbon emissions output in Malaysia. Int J Energy Econ Policy 3:84–89CrossRef
120.
Peesapati V, Zachariades C, Li Q, Rowland SM, Cotton I, et al. (2012) 3D electric field computation of a composite cross-arm. In: Densley J, (ed) IEEE international symposium on electrical insulation. IEEE, San Juan, pp 464-468
121.
Rawi IM, Ab Kadir MZA (2015) Investigation on the 132kV overhead lines lightning-related flashovers in Malaysia. Int Symp Light Prot XIII SIPDA 2015:239–243
Metadaten
Titel
Filament-wound glass-fibre reinforced polymer composites: Potential applications for cross arm structure in transmission towers
verfasst von
M. R. M. Asyraf
M. R. Ishak
Agusril Syamsir
A. L. Amir
N. M. Nurazzi
M. N. F. Norrrahim
Mochamad Asrofi
M. Rafidah
R. A. Ilyas
Mohamad Zakir Abd Rashid
M. R. Razman
Publikationsdatum
11.02.2022
Verlag
Springer Berlin Heidelberg
Erschienen in
Polymer Bulletin / Ausgabe 2/2023
Print ISSN: 0170-0839
Elektronische ISSN: 1436-2449
DOI
https://doi.org/10.1007/s00289-022-04114-4

Weitere Artikel der Ausgabe 2/2023

Polymer Bulletin 2/2023 Zur Ausgabe

Original Paper

Magnetic red mud/chitosan based bionanocomposites for adsorption of Cr(VI) from aqueous solutions: synthesis, characterization and adsorption kinetics

Original Paper

The effect of pigment volume concentration on self-stratification and physico-mechanical properties of solvent-free silicone/epoxy coating systems

Original Paper

Self-assembly and thermal behavior of amphiphilic di-block copolymers of poly(methyl methacrylate)-block-poly(ethylene oxide) (PMMA-b-PEO)

Original Paper

Synthesis and characterization of semi-interpenetrating polymer network hydrogel based on polyacrylic acid/polyallylamine and its application in wastewater remediation

Original Paper

Investigation into the antibacterial activity of covalent organic frameworks as a delivery system of trimethoprim against Escherichia coli and Staphylococcus aureus

Original Paper

Investigation of structural and electrical properties of a biopolymer materials with its potential application in solid-state batteries

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Zur Marktübersicht
    Bildnachweise