nach oben

Experimental Mechanics

Erschienen in:

09.05.2023 | Research paper

High-Throughput High-Resolution Digital Image Correlation Measurements by Multi-Beam SEM Imaging

verfasst von: R. L. Black, T. Garbowski, C. Bean, A. L. Eberle, S. Nickell, D. Texier, V. Valle, J. C. Stinville

Erschienen in: Experimental Mechanics | Ausgabe 5/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Background

Recent improvements in spatial resolution and measurement sensitivity for high-resolution digital image correlation (HR-DIC) now provide an avenue for the quantitative measurement of deformation events and capturing the physical nature of deformation mechanisms. However, HR-DIC measurements require significant time due to scanning electron image acquisition; such a limitation prevents the widespread use of HR-DIC for material characterization.

Objective

Apply a novel SEM acquisition technology to enhance HR-DIC measurements for high throughput applications.

Methods

Multi-beam SEM technology is employed to image an entire gauge length at once at high resolution and at nearly a hundredfold acceleration of typical HR-DIC image acquisition, even when automated stage movement and image acquisition are employed. These images were fed into a discontinuity-tolerant HR-DIC software to determine slip localization induced by non-metallic inclusions and grain structure.

Results

Slip localization was able to be analyzed to an unprecedented level, with over 210,000 slip bands able to be investigated, with the most intense slip localizing near and parallel to twin boundaries and in the vicinity of non-metallic inclusion clusters. Additionally, secondary slip activation and grain boundary shearing by intense dislocation pileups are observed to reduce slip amplitude near and parallel to twin boundaries.

Conclusions

By performing HR-DIC in conjunction with a multi-beam SEM, high-throughput measurements of large field-of-view, high-resolution images were able to be performed in a timely manner. These measurements provided an immense number of slip events for statistical analysis to be performed on to relate to microstructural features.

Vorheriger Artikel Experimental Evaluation of Curved Aluminum Structures Subjected to Underwater Explosions

Nächster Artikel Thermal Shock and Residual Strength Testing of SiC/SiC Composite Braided Tubes

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Stinville JC, Echlin MP, Texier D, Bridier F, Bocher P, Pollock TM (2016) Sub-grain scale digital image correlation by electron microscopy for polycrystalline materials during elastic and plastic deformation. Exp Mech 56(2):197–216. https://doi.org/10.1007/s11340-015-0083-4. (ISSN 1741–2765)CrossRef

Magazzeni CM, Gardner HM, Howe I, Gopon P, Waite JC, Rugg D, Armstrong DEJ, Wilkinson AJ (2021) Nanoindentation in multi-modal map combinations: a correlative approach to local mechanical property assessment. J Mater Res 36(11):2235–2250. https://doi.org/10.1557/s43578-020-00035-y. (ISSN 2044–5326)CrossRef

Wheeler JM, Gan B, Spolenak R (2022) Combinatorial investigation of the ni–ta system via correlated high-speed nanoindentation and edx mapping. Small Methods 6(2):2101084. https://doi.org/10.1002/smtd.202101084CrossRef

Jelinek A, Zak S, Alfreider M, Kiener D (2022) High-throughput micromechanical testing enabled by optimized direct laser writing. Adv Eng Mater 25(7):202200288. https://doi.org/10.1002/ademCrossRef

Ando T (2017) High-speed atomic force microscopy and its future prospects. Biophys Rev 10(2):285–292. https://doi.org/10.1007/s12551-017-0356-5CrossRef

Stinville JC, Charpagne MC, Cervellon A, Hemery S, Wang F, Callahan PG, Valle V, Pollock TM (2022) On the origins of fatigue strength in crystalline metallic materials. Science 377(6610):1065–1071MathSciNetCrossRef

Bourdin F, Stinville JC, Echlin MP, Callahan PG, Lenthe WC, Torbet CJ, Texier D, Bridier F, Cormier J, Villechaise P, Pollock TM, Valle V (2018) Measurements of plastic localization by heaviside-digital image correlation. Acta Mater 157:307–325. https://doi.org/10.1016/j.actamat.2018.07.013. (ISSN 1359–6454)CrossRef

Chen Z, Lenthe W, Stinville JC, Echlin M, Pollock TM, Daly S (2018) High-resolution deformation mapping across large fields of view using scanning electron microscopy and digital image correlation. Exp Mech 58(9):1407–1421. https://doi.org/10.1007/s11340-018-0419-y. (ISSN 1741–2765)CrossRef

Jiang R, Pierron F, Octaviani S, Reed PAS (2017) Characterisation of strain localisation processes during fatigue crack initiation and early crack propagation by sem-dic in an advanced disc alloy. Mater Sci Eng A 699:128–144. https://doi.org/10.1016/j.msea.2017.05.091. (ISSN 0921–5093)CrossRef

10.

Edwards TEJ, Di Gioacchino F, Clegg WJ (2021) High resolution digital image correlation mapping of strain localization upon room and high temperature, high cycle fatigue of a tial intermetallic alloy. Int J Fatigue 142:105905. https://doi.org/10.1016/j.ijfatigue.2020.105905. (ISSN 0142–1123)CrossRef

11.

Mello AW, Nicolas A, Sangid MD (2017) Fatigue strain mapping via digital image correlation for ni-based superalloys: the role of thermal activation on cube slip. Mater Sci Eng A 695:332–341. https://doi.org/10.1016/j.msea.2017.04.002. (ISSN 0921–5093)CrossRef

12.

Xu X, Lunt D, Thomas R, Prasath Babu R, Harte A, Atkinson M, da Fonseca JQ, Preuss M (2019) Identification of active slip mode in a hexagonal material by correlative scanning electron microscopy. Acta Mater 175:376–393. https://doi.org/10.1016/j.actamat.2019.06.024. (ISSN 1359–6454)CrossRef

13.

Sperry R, Han S, Chen Z, Daly SH, Crimp MA, Fullwood DT (2021) Comparison of ebsd, dic, afm, and ecci for active slip system identification in deformed ti-7al. Mater Charact 173:110941. https://doi.org/10.1016/j.matchar.2021.110941. (ISSN 1044–5803)CrossRef

14.

Stinville JC, Francis T, Polonsky AT, Torbet CJ, Charpagne MA, Chen Z, Balbus GH, Bourdin F, Valle V, Callahan PG, Echlin MP, Pollock TM (2021) Time-resolved digital image correlation in the scanning electron microscope for analysis of time-dependent mechanisms. Exp Mech 61(2):331–348. https://doi.org/10.1007/s11340-020-00632-2. (ISSN 17412765)CrossRef

15.

Montgomery CB, Koohbor B, Sottos NR (2019) A robust patterning technique for electron microscopy-based digital image correlation at sub-micron resolutions. Exp Mech 59(7):1063–1073. https://doi.org/10.1007/s11340-019-00487-2CrossRef

16.

Hoefnagels JPM, van Maris MPFHL, Vermeij T (2019) One-step deposition of nano-to-micron-scalable, high-quality digital image correlation patterns for high-strainiin-situ/imulti-microscopy testing. Strain 55(6):e12330. https://doi.org/10.1111/str.12330CrossRef

17.

Kammers AD, Daly S (2013) Self-assembled nanoparticle surface patterning for improved digital image correlation in a scanning electron microscope. Exp Mech 53(8):1333–1341. https://doi.org/10.1007/s11340-013-9734-5. (ISSN 0014–4851)CrossRef

18.

Kammers AD, Daly S (2013) Digital image correlation under scanning electron microscopy: Methodology and validation. Exp Mech 53(9):1743–1761. https://doi.org/10.1007/s11340-013-9782-x. (ISSN 0014–4851)CrossRef

19.

Chen Z, Daly S (2018) Deformation twin identification in magnesium through clustering and computer vision. Mater Sci Eng A 736:61–75. https://doi.org/10.1016/j.msea.2018.08.083. (ISSN 0921–5093)CrossRef

20.

Mansouri Arani M, Ramesh NS, Wang X, Parson N, Li M, Poole WJ (2022) The localization of plastic deformation in the precipitate free zone of an al-mg-si-mn alloy. Acta Mater 231:117872. https://doi.org/10.1016/j.actamat.2022.117872. (ISSN 1359–6454)CrossRef

21.

Atkinson MD, Donoghue JM, da Fonseca JQ (2020) Measurement of local plastic strain during uniaxial reversed loading of nickel alloy 625. Mater Charact 168:110561. https://doi.org/10.1016/j.matchar.2020.110561. (ISSN 1044–5803)CrossRef

22.

Harr ME, Daly S, Pilchak AL (2021) The effect of temperature on slip in microtextured ti-6al-2sn-4zr-2mo under dwell fatigue. Int J Fatigue 147:106173. https://doi.org/10.1016/j.ijfatigue.2021.106173. (ISSN 0142–1123)CrossRef

23.

Linne MA, Bieler TR, Daly S (2020) The effect of microstructure on the relationship between grain boundary sliding and slip transmission in high purity aluminum. Int J Plast 135:102818. https://doi.org/10.1016/j.ijplas.2020.102818. (ISSN 0749–6419)CrossRef

24.

Rotella J, Mello AW, Venkataraman A, Buckingham R, Hardy M, Sangid MD (2021) Dwellfatigue of ni-based superalloys with serrated and planar grain boundary morphologies: yhe role of the γ phase on strain accumulation and cavitation. Metall Mater Trans A 52(11):5079–5095. https://doi.org/10.1007/s11661-021-06454-8. (ISSN 1543–1940)CrossRef

25.

Weidner A, Biermann H (2021) Review on strain localization phenomena studied by high-resolution digital image correlation. Adv Eng Mater 23(4):2001409. https://doi.org/10.1002/adem.202001409CrossRef

26.

Vermeij T, Hoefnagels JPM (2022) Plasticity, localization, and damage in ferritic-pearlitic steel studied by nanoscale digital image correlation. Scr Mater 208:114327. https://doi.org/10.1016/j.scriptamat.2021. (ISSN 1359–6462)CrossRef

27.

Carroll J, Abuzaid W, Lambros J, Sehitoglu H (2010) An experimental methodology to relate local strain to microstructural texture. Rev Sci Inst 81(8):083703. https://doi.org/10.1063/1.3474902CrossRef

28.

Guery A, Hild F, Latourte F, Roux S (2016) Slip activities in polycrystals determined by coupling dic measurements with crystal plasticity calculations. Int J Plast 81:249–266. https://doi.org/10.1016/j.ijplas.2016.01.008. (ISSN 0749–6419)CrossRef

29.

Wang X, Pan Z, Fan F, Wang J, Liu Y, Mao SX, Zhu T, Xia S (2015) Nanoscale deformation analysis with high-resolution transmission electron microscopy and digital image correlation. J Appl Mech 82(12):121001. https://doi.org/10.1115/1.4031332. (ISSN 0021–8936)CrossRef

30.

Zhang Y, Feng L, Dillon S, Lambros J (2022) Full-field deformation measurements in the transmission electron microscope using digital image correlation and particle tracking. Mater Charact 183:111598. https://doi.org/10.1016/j.matchar.2021.111598. (ISSN 1044–5803)CrossRef

31.

Carroll JD, Abuzaid W, Lambros J, Sehitoglu H (2013) High resolution digital image correlation measurements of strain accumulation in fatigue crack growth. Int J Fatigue 57:140–150. https://doi.org/10.1016/j.ijfatigue.2012.06.010. (ISSN 0142–1123; Fatigue and Microstructure: A special issue on recent advances)CrossRef

32.

Abuzaid WZ, Sangid MD, Carroll JD, Sehitoglu H, Lambros J (2012) Slip transfer and plastic strain accumulation across grain boundaries in hastelloy x. J Mech Phys Solids 60(6):1201–1220. https://doi.org/10.1016/j.jmps.2012.02.001. (ISSN 0022–5096)CrossRef

33.

Bertin M, Du C, Hoefnagels JPM, Hild F (2016) Crystal plasticity parameter identification with 3d measurements and integrated digital image correlation. Acta Mater 116:321–331. https://doi.org/10.1016/j.actamat.2016.06.039. (ISSN 1359–6454)CrossRef

34.

Keller AL, Zeidler D, Kemen T (2014) High throughput data acquisition with a multi-beam SEM. In: Postek MT, Newbury DE, Frank Platek S, Maugel TK (eds) SPIE Proceedings. SPIE. https://doi.org/10.1117/12.2069119CrossRef

35.

Texier D, Stinville JC, Echlin MP, Pierret S, Villechaise P, Pollock TM, Cormier J (2019) Short crack propagation from cracked non-metallic inclusions in a ni-based polycrystalline superalloy. Acta Mater 165:241–258. https://doi.org/10.1016/j.actamat.2018.11.051. (ISSN 1359–6454)CrossRef

36.

Texier D, Stinville JC, Charpagne MA, Chen Z, Valle V, Villechaise P, Pollock TM, Cormier J (2020) Role of non-metallic inclusions and twins on the variability in fatigue life in alloy 718 nickel base superalloy. In: Tin S, Hardy M, Clews J, Cormier J, Feng Q, Marcin J, O’Brien C, Suzuki A (eds) Superalloys. Springer International Publishing, Cham, pp 629–639 (ISBN 978–3–030–51834–9)

37.

Marx V (2013) Brain mapping in high resolution. Nature 503(7474):147–152. https://doi.org/10.1038/503147a. (ISSN 1476–4687)CrossRef

38.

Hull D, Bacon DJ (2011) Introduction to dislocations. Materials science and technology. Elsevier Science (ISBN 9780080966731)

39.

Charpagne MA, Strub F, Pollock TM (2019) Accurate reconstruction of ebsd datasets by a multimodal data approach using an evolutionary algorithm. Mater Charact 150:184–198. https://doi.org/10.1016/j.matchar.2019.01.033. (ISSN 1044–5803)CrossRef

40.

Preibisch S, Saalfeld S, Tomancak P (2009) Globally optimal stitching of tiled 3d microscopic image acquisitions. Bioinformatics 25(11):1463–1465. https://doi.org/10.1093/bioinformatics/btp184. (ISSN 1367–4811)CrossRef

41.

Stinville JC, Martin E, Karadge M, Ismonov S, Soare M, Hanlon T, Sundaram S, Echlin MP, Callahan PG, Lenthe WC, Miller VM, Miao J, Wessman AE, Finlay R, Loghin A, Marte J, Pollock TM (2018) Fatigue deformation in a polycrystalline nickel base superalloy at intermediate and high temperature: competing failure modes. Acta Mater 152:16–33. https://doi.org/10.1016/j.actamat.2018.03.035. (ISSN 1359–6454)CrossRef

42.

Luster J, Morris MA (1995) Compatibility of deformation in two-phase ti-al alloys: dependence on microstructure and orientation relationships. Metall Mater Trans A 26(7):1745–1756. https://doi.org/10.1007/BF02670762. (Cited by: 266)CrossRef

43.

Mughrabi H (2013) Cyclic slip irreversibility and fatigue life: a microstructure-based analysis. Acta Mater 61(4):1197–1203. https://doi.org/10.1016/j.actamat.2012.10.029. (ISSN 1359–6454)CrossRef

44.

Pinz M, Weber G, Stinville JC, Pollock T, Ghosh S (2022) Data-driven bayesian model-based prediction of fatigue crack nucleation in ni-based superalloys. npj Comput Mater 8(1):39. https://doi.org/10.1038/s41524-022-00727-5. (ISSN 2057–3960)CrossRef

45.

Zhang X, Stinville JC, Pollock TM, Dunne FPE (2021) Crystallography and elastic anisotropy in fatigue crack nucleation at nickel alloy twin boundaries. J Mech Phys Solids 155:104538. https://doi.org/10.1016/j.jmps.2021.104538. (ISSN 0022–5096)MathSciNetCrossRef

46.

Sperry R, Harte A, da Fonseca JQ, Homer ER, Wagoner RH, Fullwood DT (2020) Slip band characteristics in the presence of grain boundaries in nickel-based superalloy. Acta Mater 193:229–238. https://doi.org/10.1016/j.actamat.2020.04.037. (ISSN 1359–6454)CrossRef

47.

Hirth JP, Lothe J, Mura T (1983) Theory of dislocations (2nd ed.). J Appl Mech 50(2):476–477. https://doi.org/10.1115/1.3167075. (ISSN 0021–8936)CrossRef

48.

Villechaise P, Cormier J, Billot T, Mendez J (2012) Mechanical behaviour and damage processes of Udimet 720Li: influence of localized plasticity at grain boundaries. 12th International Symposium on Superalloys, pp 15–24

49.

Larrouy B, Villechaise P, Cormier J, Berteaux O (2015) Grain boundary–slip bands interactions: impact on the fatigue crack initiation in a polycrystalline forged ni-based superalloy. Acta Mater 99:325–336. https://doi.org/10.1016/j.actamat.2015.08.009. (ISSN 1359–6454)CrossRef

50.

Bergsmo A, Xu Y, Poole B, Dunne FPE (2022) Twin boundary fatigue crack nucleation in a polycrystalline nickel superalloy containing non-metallic inclusions. J Mech Phys Solids 160:104785. https://doi.org/10.1016/j.jmps.2022.104785. (ISSN 0022–5096)CrossRef

Titel: High-Throughput High-Resolution Digital Image Correlation Measurements by Multi-Beam SEM Imaging
verfasst von: R. L. Black
T. Garbowski
C. Bean
A. L. Eberle
S. Nickell
D. Texier
V. Valle
J. C. Stinville
Publikationsdatum: 09.05.2023
Verlag: Springer US
Erschienen in: Experimental Mechanics / Ausgabe 5/2023
Print ISSN: 0014-4851
Elektronische ISSN: 1741-2765
DOI: https://doi.org/10.1007/s11340-023-00961-y

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Background

Objective

Methods

Results

Conclusions

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 5/2023

Indentation Testing Method for Determining Mechanical Properties and Tensile Flow Curve of High-Strength Rail Steels

Feasibility of Nondestructive Measurement of 3D Vascular Intramural Strains by Optical Coherence Elastography Based on Distortion Correction and Digital Volume Correlation

Experimental Evaluation of Curved Aluminum Structures Subjected to Underwater Explosions

Thermal Shock and Residual Strength Testing of SiC/SiC Composite Braided Tubes

The Effect of Specimen Thickness on the Lüders Phenomena in AISI 1524 Steel Alloy: Experimental Observations Using DIC

Architecture-Driven Digital Volume Correlation: Application to the Analysis of In-Situ Crushing of a Polyurethane Foam

Premium Partner

Marktübersichten