nach oben

Tribology Letters

Erschienen in:

01.03.2020 | Original Paper

Hybrid Wear-Reducing Micro-pits Counterface Texture Against Polymeric Solid Lubricants

verfasst von: Jiaxin Ye, Yifan Zhang, Kaisen Zhang, Wei Wang, Xiaojun Liu, Kun Liu

Erschienen in: Tribology Letters | Ausgabe 1/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

We report a hybrid wear-reducing surface by sliding steel counterfaces with pre-textured micro-pits pattern against polymeric solid lubricants. When being slid against a freshly prepared pin of the same polymer material, the hybrid surface significantly reduced wear rate of the polymer and steel counterface by up to 69% and 550% compared with the untextured unconditioned surface for the four different polymers surveyed in this study. Polymer wear generally decreased with increased iteration round of preconditioning while counterface wear was more dependent on transfer film and wear track topography. Worn counterface profilometry analysis suggested the preconditioned hybrid surface improved debris retention within the micro-pits which might mitigate wear by acting as debris reservoirs at the sliding interface and promoting transfer film formation.

Graphical abstract

Vorheriger Artikel Effect of Supporting Metal Substrates on the Tribological Properties of Monolayer Graphene

Nächster Artikel Efficient Chemical Mechanical Polishing of AISI 52100 Bearing Steel with TiSol-NH4 Dispersion-Based Slurries

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Burris, D.L., Boesl, B., Bourne, G.R., Sawyer, W.G.: Polymeric nanocomposites for tribological applications. Macromol. Mater. Eng. 292, 387–402 (2007)CrossRef

Sawyer, W.G., Argibay, N., Burris, D.L., Krick, B.A.: Mechanistic studies in friction and wear of bulk materials. Annu. Rev. Mater. Res. 44, 395–427 (2014). https://doi.org/10.1146/annurev-matsci-070813-113533 CrossRef

Ye, J., Burris, D.L., Xie, T.: A review of transfer films and their role in ultra-low-wear sliding of polymers. Lubricants. 4, 4 (2016). https://doi.org/10.3390/lubricants4010004 CrossRef

Ye, J., Sun, W., Zhang, Y., Liu, X., Liu, K.: Measuring evolution of transfer film–substrate interface using low wear alumina PTFE. Tribol. Lett. (2018). https://doi.org/10.1007/s11249-018-1054-6 CrossRef

Wieleba, W.: The statistical correlation of the coefficient of friction and wear rate of PTFE composites with steel counterface roughness and hardness. Wear 252, 719–729 (2002). https://doi.org/10.1016/S0043-1648(02)00029-7 CrossRef

Franklin, S.E., de Kraker, A.: Investigation of counterface surface topography effects on the wear and transfer behaviour of a POM–20% PTFE composite. Wear 255, 766–773 (2003). https://doi.org/10.1016/S0043-1648(03)00193-5 CrossRef

Blanchet, T.A., Kandanur, S.S., Schadler, L.S.: Coupled effect of filler content and countersurface roughness on PTFE nanocomposite wear resistance. Tribol. Lett. 40, 11–21 (2009). https://doi.org/10.1007/s11249-009-9519-2 CrossRef

Laux, K.A., Schwartz, C.J.: Influence of linear reciprocating and multi-directional sliding on PEEK wear performance and transfer film formation. Wear 301, 727–734 (2013). https://doi.org/10.1016/j.wear.2012.12.004 CrossRef

Burris, D.L., Sawyer, W.G.: Tribological sensitivity of PTFE/alumina nanocomposites to a range of traditional surface finishes. Tribol. Trans. 48, 147–153 (2005). https://doi.org/10.1080/05698190590923842 CrossRef

10.

Harris, K.L., Curry, J.F., Pitenis, A.A., Rowe, K.G., Sidebottom, M.A., Sawyer, W.G., Krick, B.A.: Wear debris mobility, aligned surface roughness, and the low wear behavior of filled polytetrafluoroethylene. Tribol. Lett. 60, 1–8 (2015). https://doi.org/10.1007/s11249-015-0581-7 CrossRef

11.

Ye, J., Tao, B., Sun, W., Haidar, D.R., Alam, K.I., Liu, K., Burris, D.L.: The competing effects of counterface peaks and valleys on the wear and transfer of ultra-low wear alumina–PTFE. Tribol. Lett. 66, 12 (2018). https://doi.org/10.1007/s11249-017-0966-x CrossRef

12.

Li, J., Xiong, D., Dai, J., Huang, Z., Tyagi, R.: Effect of surface laser texture on friction properties of nickel-based composite. Tribol. Int. 43, 1193–1199 (2010). https://doi.org/10.1016/j.triboint.2009.12.044 CrossRef

13.

Hu, T., Hu, L., Ding, Q.: Effective solution for the tribological problems of Ti-6Al-4V: combination of laser surface texturing and solid lubricant film. Surf. Coat. Technol. 206, 5060–5066 (2012). https://doi.org/10.1016/j.surfcoat.2012.06.014 CrossRef

14.

Wu, Z., Deng, J., Zhang, H., Lian, Y., Zhao, J.: Tribological behavior of textured cemented carbide filled with solid lubricants in dry sliding with titanium alloys. Wear 292–293, 135–143 (2012). https://doi.org/10.1016/j.wear.2012.05.021 CrossRef

15.

Hu, T., Zhang, Y., Hu, L.: Tribological investigation of MoS₂ coatings deposited on the laser textured surface. Wear 278–279, 77–82 (2012). https://doi.org/10.1016/j.wear.2012.01.001 CrossRef

16.

Li, J., Xiong, D., Zhang, Y., Zhu, H., Qin, Y., Kong, J.: Friction and wear properties of MoS₂-overcoated laser surface-textured silver-containing nickel-based alloy at elevated temperatures. Tribol. Lett. 43, 221–228 (2011). https://doi.org/10.1007/s11249-011-9797-3 CrossRef

17.

Basnyat, P., Luster, B., Muratore, C., Voevodin, A.A., Haasch, R., Zakeri, R., Kohli, P., Aouadi, S.M.: Surface texturing for adaptive solid lubrication. Surf. Coat. Technol. 203, 73–79 (2008). https://doi.org/10.1016/j.surfcoat.2008.07.033 CrossRef

18.

Voevodin, A.A., Zabinski, J.S.: Laser surface texturing for adaptive solid lubrication. Wear 261, 1285–1292 (2006). https://doi.org/10.1016/j.wear.2006.03.013 CrossRef

19.

Cho, M.: Friction and wear of a hybrid surface texturing of polyphenylene sulfide-filled micropores. Wear 346–347, 158–167 (2016). https://doi.org/10.1016/j.wear.2015.11.010 CrossRef

20.

Ye, J., Zhang, H., Liu, X., Liu, K.: Low wear steel counterface texture design: a case study using micro-pits texture and alumina–PTFE nanocomposite. Tribol. Lett. 65, 165 (2017). https://doi.org/10.1007/s11249-017-0948-z CrossRef

21.

McCook, N., Hamilton, M., Burris, D., Sawyer, W.: Tribological results of PEEK nanocomposites in dry sliding against 440C in various gas environments. Wear 262, 1511–1515 (2007)CrossRef

22.

Burris, D.L., Sawyer, W.G.: Improved wear resistance in alumina-PTFE nanocomposites with irregular shaped nanoparticles. Wear 260, 915–918 (2006)CrossRef

23.

San, J., Liu, J., Zhu, B., Liu, Z., Dong, C., Zhang, Q.: Tribological properties of ion-implanted polyphenylene oxide (PPO). Wear 251, 1504–1510 (2001). https://doi.org/10.1016/S0043-1648(01)00805-5 CrossRef

24.

Amstutz, H.C.: Polymers as bearing materials for total hip replacement: a friction and wear analysis. J. Biomed. Mater. Res. 3, 547–568 (1969). https://doi.org/10.1002/jbm.820030402 CrossRef

25.

Krick, B.A., Pitenis, A.A., Harris, K.L., Junk, C.P., Sawyer, W.G., Brown, S.C., Rosenfeld, H.D., Kasprzak, D.J., Johnson, R.S., Chan, C.D., Blackman, G.S.: Ultralow wear fluoropolymer composites: nanoscale functionality from microscale fillers. Tribol. Int. 95, 245–255 (2016). https://doi.org/10.1016/j.triboint.2015.10.002 CrossRef

26.

Song, L., Shi, G., Li, Z.: Simulation of laser drilling temperature field by using ANSYS. Acta Armamentarii 5, 879–882 (2006)

27.

Wenyuan, G., Maocai, W., Xiaobing, Z.: Recast layer formed by laser drilling of Ni-based superalloys and progress on its control. Laser J. 24, 1–3 (2003)

28.

Zeng, C., Tian, W., Hua, L.: A comprehensive study of thermal damage consequent to laser surface treatment. Mater. Sci. Eng. A. 564, 381–388 (2013). https://doi.org/10.1016/j.msea.2012.11.078 CrossRef

29.

Haidar, D.R., Alam, K.I., Burris, D.L.: Tribological insensitivity of an ultralow-wear poly(etheretherketone)–polytetrafluoroethylene polymer blend to changes in environmental moisture. J. Phys. Chem. C 122, 5518–5524 (2018). https://doi.org/10.1021/acs.jpcc.7b12487 CrossRef

30.

Burris, D.L., Sawyer, W.G.: Measurement uncertainties in wear rates. Tribol. Lett. 36, 81–87 (2009). https://doi.org/10.1007/s11249-009-9477-8 CrossRef

31.

George, D., Mallery, P.: IBM SPSS statistics 23 step by step: a simple guide and reference. Routledge, New York (2016)CrossRef

32.

Ruxton, G.D., Beauchamp, G.: Time for some a priori thinking about post hoc testing. Behav. Ecol. 19, 690–693 (2008). https://doi.org/10.1093/beheco/arn020 CrossRef

33.

Bahadur, S., Tabor, D.: The wear of filled polytetrafluoroethylene. Wear 98, 1–13 (1984). https://doi.org/10.1016/0043-1648(84)90213-8 CrossRef

34.

Khare, H.S., Moore, A.C., Haidar, D.R., Gong, L., Ye, J., Rabolt, J.F., Burris, D.L.: Interrelated effects of temperature and environment on wear and tribochemistry of an ultralow wear PTFE composite. J. Phys. Chem. C 119, 16518–16527 (2015). https://doi.org/10.1021/acs.jpcc.5b00947 CrossRef

35.

Pitenis, A.A., Ewin, J.J., Harris, K.L., Sawyer, W.G., Krick, B.A.: In vacuo tribological behavior of polytetrafluoroethylene (PTFE) and alumina nanocomposites: the importance of water for ultralow wear. Tribol. Lett. (2014). https://doi.org/10.1007/s11249-013-0256-1 CrossRef

36.

Pitenis, A.A., Harris, K.L., Junk, C.P., Blackman, G.S., Sawyer, W.G., Krick, B.A.: Ultralow wear PTFE and alumina composites: it is all about tribochemistry. Tribol. Lett. (2015). https://doi.org/10.1007/s11249-014-0445-6 CrossRef

37.

Wang, X.Y., Ng, G.K.L., Liu, Z., Li, L., Bradley, L.: EPMA microanalysis of recast layers produced during laser drilling of type 305 stainless steel. Thin Solid Films 453–454, 84–88 (2004). https://doi.org/10.1016/j.tsf.2003.11.158 CrossRef

38.

Imran, M., Mativenga, P.T., Gholinia, A., Withers, P.J.: Assessment of surface integrity of Ni superalloy after electrical-discharge, laser and mechanical micro-drilling processes. Int. J. Adv. Manuf. Technol. 79, 1303–1311 (2015). https://doi.org/10.1007/s00170-015-6909-5 CrossRef

Titel: Hybrid Wear-Reducing Micro-pits Counterface Texture Against Polymeric Solid Lubricants
verfasst von: Jiaxin Ye
Yifan Zhang
Kaisen Zhang
Wei Wang
Xiaojun Liu
Kun Liu
Publikationsdatum: 01.03.2020
Verlag: Springer US
Erschienen in: Tribology Letters / Ausgabe 1/2020
Print ISSN: 1023-8883
Elektronische ISSN: 1573-2711
DOI: https://doi.org/10.1007/s11249-020-1271-7

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Graphical abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1/2020

Comment on “A Scratch-Guide Model for the Motion of a Curling Rock”

Effect of Supporting Metal Substrates on the Tribological Properties of Monolayer Graphene

Conveyor Belt Drive Physics

The Relation Between Subsurface Stresses and Useful Wear Life in Sliding Contacts

Nanowear Mechanisms of Mg Alloyed with Al and Y at Elevated Temperatures

Response to Comment on “On the Origin of Frictional Energy Dissipation”, by B.N.J. Persson

Premium Partner

Marktübersichten