nach oben

Erschienen in:

2022 | OriginalPaper | Buchkapitel

Implementation of Complete Vector Control for DFIG Based Wind Turbine

verfasst von : Rajesh Kumar, Ch. Sekhar, Saibal Manna, A. K. Akella

Erschienen in: Recent Advances in Power Electronics and Drives

Verlag: Springer Nature Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

A lot of development is carried out on renewable energy technologies for the upcoming trend among which wind energy system and solar energy system is mostly admired and preferred due to the availability of their sources. This paper deals with the wind energy system and control method implementations on the wind turbine system for continuity in the supply of power. Basically, two types of generators, asynchronous and synchronous generator can be used in the function of wind power system. Among asynchronous machines, we are implementing doubly fed induction machine (DFIM), which operates as generator in one of the operation modes for the conversion of mechanical energy (obtained from the wind conversion system) to electrical energy. The wind turbine implemented with DFIM is linked to a grid modeled system via following converters termed as converter of rotor side and converter of stator side converter whose firing angles are dependent on the vector control designed for the system to ensure a better-quality output power. The DFIG based wind turbine model is designed by using MATLAB Simulink software and vector control on the rotor side depends on d-axis current and the required transformation matrices are modeled by using function blocks. The results obtained are studied and analyzed properly considering some of the practical considerations and are able to explain the working of the system.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Analysis and Design Optimization of Six-Phase Induction Motor by Metaheuristic Methods

Nächstes Kapitel TLO Based OPF with FACTS Devices for DC Link Placement Problem

Djeghloud H, Bentounsi A, Benalla H (2010) Simulation of a DFIG-based wind turbine with active filtering function using MATLAB/Simulink. In: The XIX international conference on electrical machines - ICEM 2010, Rome, Italy, pp 1–7. https://doi.org/10.1109/ICELMACH.2010.5607885.

Puchalapalli S, Singh B (2020) A novel control scheme for wind turbine driven DFIG interfaced to utility grid. IEEE Trans Indus Appl 56(3):2925–2937. https://doi.org/10.1109/TIA.2020.2969400

Tang W, Hu J, Chang Y, Liu F (2018) Modeling of DFIG-based wind turbine for power system transient response analysis in rotor speed control timescale. IEEE Trans Power Syst 33(6):6795–6805. https://doi.org/10.1109/TPWRS.2018.2827402CrossRef

Ouyang J, Tang T, Yao J, Li M (2019) Active voltage control for DFIG-based wind farm integrated power system by coordinating active and reactive powers under wind speed variations. IEEE Trans Energy Convers 34(3):1504–1511. https://doi.org/10.1109/TEC.2019.2905673CrossRef

Ekanayake J, Jenkins N (2004) Comparison of the response of doubly fed and fixed-speed induction generator wind turbines to changes in network frequency. IEEE Trans Energy Convers 19(4):800–802. https://doi.org/10.1109/TEC.2004.827712CrossRef

Arani MFM, Mohamed YAI (2015) Analysis and impacts of implementing droop control in DFIG-based wind turbines on microgrid/weak-grid stability. IEEE Trans Power Syst 30(1):385–396. https://doi.org/10.1109/TPWRS.2014.2321287CrossRef

Li Y, Xu Z, Meng K (2017) Optimal power sharing control of wind turbines. IEEE Trans Power Syst 32(1):824–825. https://doi.org/10.1109/TPWRS.2016.2549741CrossRef

Li S, Haskew TA, Williams KA, Swatloski RP (2012) Control of DFIG wind turbine with direct-current vector control configuration. IEEE Trans Sustain Energy 3(1):1–11. https://doi.org/10.1109/TSTE.2011.2167001CrossRef

Qiao W, Zhou W, Aller JM, Harley RG (2008) Wind speed estimation based sensor less output maximization control for a wind turbine driving a DFIG. IEEE Trans Power Electron 23(3):1156–1169. https://doi.org/10.1109/TPEL.2008.921185CrossRef

10.

Mohammadi J, VaezZadeh S, Afsharnia S, Daryabeigi E (2014) A combined vector and direct power control for DFIG-based wind turbines. IEEE Trans Sustain Energy 5(3):767–775. https://doi.org/10.1109/TSTE.2014.2301675CrossRef

11.

Ghosh S, Kamalasadan S, Senroy N, Enslin J (2016) Doubly fed induction generator (DFIG)-based wind farm control framework for primary frequency and inertial response application. IEEE Trans Power Syst 31(3):1861–1871. https://doi.org/10.1109/TPWRS.2015.2438861CrossRef

12.

Saruwatari M et al (2016) Design study of 15-MW fully superconducting generators for offshore wind turbine. IEEE Trans Appl Supercond 26(4):1–5, Art no. 5206805. https://doi.org/10.1109/TASC.2016.2535315

13.

Nguyen N, Almasabi S, Mitra J (2018) Impact of correlation between wind speed and turbine availability on wind farm reliability. In: 2018 IEEE industry applications society annual meeting (IAS). Portland, OR, USA, pp 1–7. https://doi.org/10.1109/IAS.2018.8544643

14.

Fischer K (2019) Reliability of power converters in wind turbines: exploratory analysis of failure and operating data from a worldwide turbine fleet. IEEE Trans Power Electron 34(7):6332–6344 https://doi.org/10.1109/TPEL.2018.2875005CrossRef

15.

Abad G, López J, Rodríguez M, Marroyo L, Iwanski G (2011) Vector control strategies for grid-connected DFIM wind turbines. In: Doubly fed induction machine: modeling and control for wind energy generation applications. IEEE, pp 303–361. https://doi.org/10.1002/9781118104965.ch7

16.

Ma L, Zheng Y, Ma H (2011) Research and simulation of double-fed wind power generation rotor side control technology. In: 2011 International conference on electrical and control engineering. Yichang, China, pp 2472–2475. https://doi.org/10.1109/ICECENG.2011.6058038

Titel: Implementation of Complete Vector Control for DFIG Based Wind Turbine
verfasst von: Rajesh Kumar
Ch. Sekhar
Saibal Manna
A. K. Akella
Verlag: Springer Nature Singapore
Buch: Recent Advances in Power Electronics and Drives
Print ISBN: 978-981-16-9238-3

Electronic ISBN: 978-981-16-9239-0

Copyright-Jahr: 2022
DOI: https://doi.org/10.1007/978-981-16-9239-0_16