nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

05.04.2021 | ORIGINAL ARTICLE

Improving the grindability of Inconel 718 by hydrogen embrittlement in ultrasonic-assisted grinding

verfasst von: Sisi Li, Jiaping Qiao, Hanqiang Wu, Jiang Zeng, Haohao Cui, Feng Ming, Yongbo Wu

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 7-8/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Inconel 718 has been widely investigated due to its machining properties. The purpose of this work was to investigate a novel proposed grinding technique for Inconel 718 with a combination of ultrasonic-assisted grinding and hydrogen embrittlement (HE) treatment. The technique was hence named hydrogen embrittlement-enhanced ultrasonic-assisted grinding (HEUAG). Before grinding, a thin stress layer was formed on the surface of the workpiece. To reveal its fundamental performance in the grinding of Inconel 718, experiments were conducted to investigate the effect of ultrasonic vibration on the grinding forces and the surface roughness in the presence of hydrogen embrittlement. To investigate the material removal process for HEUAG, single-grit grinding tests were also conducted with hydrogenated samples. Furthermore, the subsurfaces for HEUAG samples were obtained with the transmission electron microscope (TEM) micrographs. The HE treatment reduced the generation of burrs around the scratches and improved the surface quality after grinding.

Vorheriger Artikel Optimization and execution of multiple holes-drilling operations based on STEP-NC

Nächster Artikel Evaluation and prediction of drilling wear based on machine vision

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Sharman A, Dewes RC, Aspinwall DK (2001) Tool life when high speed ball nose end milling Inconel 718. J Mater Process Technol 118:29–35. https://doi.org/10.1016/S0924-0136(01)00855-XCrossRef

Sharman ARC, Hughes JI, Ridgway K (2015) The effect of tool nose radius on surface integrity and residual stresses when turning Inconel 718. J Mater Process Technol 216:123–132. https://doi.org/10.1016/j.jmatprotec.2014.09.002CrossRef

Radhakrishna CH, Prasad Rao K (1997) The formation and control of Laves phase in superalloy 718 welds. J Mater Sci 32:1977–1984. https://doi.org/10.1023/A:1018541915113CrossRef

Zhao J, Liu Z (2020) Influences of coating thickness on cutting temperature for dry hard turning Inconel 718 with PVD TiAlN coated carbide tools in initial tool wear stage. J Manuf Process 56(A):1155–1165. https://doi.org/10.1016/j.jmapro.2020.06.010CrossRef

Ulutan D, Ozel T (2011) Machining induced surface integrity in titanium and nickel alloys: a review. Int J Mach Tools Manuf 51:250–280. https://doi.org/10.1016/j.ijmachtools.2010.11.003CrossRef

Ozcelik B, Oktem H, Kurtaran H (2005) Optimum surface roughness in end milling Inconel 718 by coupling neural network model and genetic algorithm. Int J Adv Manuf Technol 27:234–241. https://doi.org/10.1007/s00170-004-2175-7CrossRef

Kitagawa T, Kubo A, Maekawa K (1997) Temperature and wear of cutting tools in high-speed machining of Inconel 718 and Ti-6Al-6V-2Sn. Wear 202:142–148. https://doi.org/10.1016/S0043-1648(96)07255-9CrossRef

Devillez A, Schneider F, Dominiak S, Dudzinski D, Larrouquere D (2007) Cutting forces and wear in dry machining of Inconel 718 with coated carbide tools. Wear 262:913–942. https://doi.org/10.1016/j.wear.2006.10.009CrossRef

Xu W, Zhang LC, Wu Y (2014) Elliptic vibration-assisted cutting of fibre-reinforced polymer composites: understanding the material removal mechanisms. Compos Sci Technol 92:103–111. https://doi.org/10.1016/j.compscitech.2013.12.011CrossRef

10.

Welling D (2014) Results of surface integrity and fatigue study of Wire-EDM compared to broaching and grinding for demanding jet engine components made of Inconel 718. Procedia CIRP 13:339–344. https://doi.org/10.1016/j.procir.2014.04.057CrossRef

11.

Devillez A, Le Coz G, Dominiak S, Dudzinski D (2011) Dry machining of Inconel 718, workpiece surface integrity. J Mater Process Technol 211:1590–1598. https://doi.org/10.1016/j.jmatprotec.2011.04.011CrossRef

12.

Zhena J, Li F, Zhu S, Ma J, Qiao Z, Liu W, Yang J (2014) Friction and wear behavior of nickel-alloy-based high temperature self-lubricating composites against Si3N4 and Inconel 718. Tribol Int 75:1–9. https://doi.org/10.1016/j.triboint.2014.03.005CrossRef

13.

Dong H, Liu Y, Li M, Liu T, Yu Z, Li D, Yang S (2019) High-speed compound sinking machining of Inconel 718 using water in oil nanoemulsion. J Mater Process Technol 274:116271. https://doi.org/10.1016/j.jmatprotec.2019.116271CrossRef

14.

Devillez A, Schneider F, Dominiak S, Dudzinski D, Larrouquere D (2007) Cutting forces and wear in dry machining of Inconel 718 with coated carbide tools. Wear 262:931–942. https://doi.org/10.1016/j.wear.2006.10.009CrossRef

15.

Bushlya V, Zhoua J, Stahl JE (2012) Effect of cutting conditions on machinability of superalloy Inconel 718 during high speed turning with coated and uncoated PCBN tools. Procedia CIRP 3:370–375. https://doi.org/10.1016/j.procir.2012.07.064CrossRef

16.

Hamid J, Walid J, Elvi D, Myriam B, Philippe B (2018) Influence of surface residual stresses on the fatigue life and crack propagation behaviour of turned Inconel 718 super-alloy. MATEC Web of Conferences 165:18004–18246. https://doi.org/10.1016/j.msea.2015.07.077CrossRef

17.

ASME (2009) International Manufacturing Science and Engineering Conference (2009) Experimental investigations into the carbide cracking phenomenon on Inconel 718 superalloy material. West Lafayette, Indiana, USA. https://doi.org/10.1115/MSEC2009-84085

18.

Nadolny K, Sienicki W, Wojtewicz M (2014) The effect upon the grinding wheel active surface condition when impregnation with non-metallic elements during internal cylindrical grinding of titanium. Arch Civ Mech Eng 15:529–533. https://doi.org/10.1016/j.acme.2014.03.004CrossRef

19.

Zhao Z, Fu Y, Xu J, Zhang Z (2016) Behavior and quantitative characterization of CBN wheel wear in high-speed grinding of nickel-based superalloy. Int J Adv Manuf Technol 87:3545–3555. https://doi.org/10.1007/s00170-016-8686-1CrossRef

20.

Shokrani A, Dhokia V, Neman ST (2012) Environmentally conscious machining of difficult-to- machine materials with regard to cutting fluids. Int J Mach Tools Manuf 57:83–101. https://doi.org/10.1016/j.ijmachtools.2012.02.002CrossRef

21.

Irani RA, Bauer RJ, Warkentin A (2005) A review of cutting fluid application in the grinding process. Int J Mach Tool Manu 45:1696–1705. https://doi.org/10.1016/j.ijmachtools.2005.03.006CrossRef

22.

Qu NS, Zhang QL, Fang XL, Ye EK, Zhu D (2015) Experimental investigation on electrochemical grinding of Inconel 718. Procedia CIRP 35:16 – 19. https://doi.org/10.1016/j.procir.2015.08.055

23.

Yang Y, Zhao G, Hu M, Liang L, He N, Jamil M (2019) Fabrication of CVD diamond micro-milling tool by hybrid machining of laser-induced graphitization and precision grinding. Ceram Int 45(18):24127–24136. https://doi.org/10.1016/j.ceramint.2019.08.121CrossRef

24.

Satyarthi MK, Pandey PM (2013) Modeling of material removal rate in electric discharge grinding process. Int J Mach Tools Manuf 74:65–73. https://doi.org/10.1016/j.ijmachtools.2013.07.008CrossRef

25.

Pei Z, Ferreira P (1998) Modeling of ductile-mode material removal in rotary ultrasonic machining. Int J Mach Tool Manu 38:1399–1418. https://doi.org/10.1016/S0890-6955(98)00007-8CrossRef

26.

Cao J, Wu Y, Lu D (2014) Masakazu Fujimoto, Mitsuyoshi Nomura, Material removal behavior in ultrasonic-assisted scratching of SiC ceramics with a single diamond tool. Int J Mach Tool Manu 79:49–61. https://doi.org/10.1016/j.ijmachtools.2014.02.002CrossRef

27.

Bhaduri D, Soo SL, Aspinwall DK (2012) A study on ultrasonic assisted creep feed grinding of nickel based superalloys. Procedia CIRP 1:359–364. https://doi.org/10.1016/j.procir.2012.04.064CrossRef

28.

Bhaduri D, Soo SL, Novovic D, Aspinwall DK, Harden P, Waterhouse C (2013) Ultrasonic assisted creep feed grinding of Inconel 718. Procedia CIRP 6:616–621. https://doi.org/10.1016/j.procir.2013.03.044CrossRef

29.

Rezende MC, Araujo LS, Gabriel SB, dos Santos DS, de Almeida LH (2015) Hydrogen embrittlement in nickel-based superalloy 718: relationship between γ′ + γ″ precipitation and the fracture mode. Int J Hydrog Energy 40(47):17075–17083. https://doi.org/10.1016/j.ijhydene.2015.07.053CrossRef

30.

Liu L, Tanaka K, Hirose A, Kobayashi KF (2002) Effects of precipitation phases on the hydrogen embrittlement sensitivity of Inconel 718. Sci Technol Adv Mater 3(4):335–344. https://doi.org/10.1016/S1468-6996(02)00039-6CrossRef

31.

Maj P, Zdunek J, Gizynski M, Mizera J, Kurzydlowski KJ (2014) Statistical analysis of the Portevin–Le Chatelier effect in Inconel 718 at high temperature. Mater Sci Eng A 619(1):158–164. https://doi.org/10.1016/j.msea.2014.09.075CrossRef

32.

Nix WD, Gao H (1998) Indentation size effects in crystalline materials: a law for strain gradient plasticity. J Mech Phys Solids 46(3):411–425. https://doi.org/10.1016/s0022-5096(97)00086-0CrossRefMATH

33.

Miroslav Nesluˇsan, Jakub ˇC´ıˇzek, Kamil Kolaˇr´ık, PeterMina´rik, Ma´ria Cˇ illikova´, Oksana Melikhova (2016) Monitoring of grinding burn via Barkhausen noise emission in case-hardened steel in large-bearing production. J Mater Process Technol 240: 104-117. https://doi.org/10.1016/j.jmatprotec.2016.09.015

34.

Dongxi Lv, Hongxiang Wang, Yongjian Tang, Yanhua Huang (2012) Surface observations and material removal machining of brittle material. Int J Eng Manuf 0 (0):1–10. https://doi.org/10.1177/0954405412454494, 226

35.

Armarego EJ, Brown RH (1969) The machining of metals, Prentice-Hall, Englewood Cliffs, New Jersey. https://doi.org/10.1016/C2009-0-23990-0

36.

ZhouWeihua TJ, ChenHaifeng SW (2019) A comprehensive investigation of surface generation and material removal characteristics in ultrasonic vibration assisted grinding. Int J Mech Sci 156:14–30. https://doi.org/10.1016/j.ijmecsci.2019.03.026CrossRef

37.

Zhu YX, Liu YL, Yang H (2015) Effect of mandrel-cores on springback and sectional deformation of rectangular H96 tube NC bending. Int J Adv Manuf Technol 78:351–360. https://doi.org/10.1007/s00170-014-6657-yCrossRef

38.

Sampath D, Akid R, Morana R (2018) Estimation of crack initiation stress and local fracture toughness of Ni-alloys 945X (UNS N09946) and 718 (UNS N07718) under a hydrogen environment via fracture surface topography analysis. Eng Fract Mech 191:424–343. https://doi.org/10.1016/j.engfracmech.2017.12.010CrossRef

39.

Zhao B, Chang B, XiaoboWang WB (2019) System design and experimental research on ultrasonic assisted elliptical vibration grinding of Nano-ZrO2 ceramics. Ceram Int 45(18):24865–24877. https://doi.org/10.1016/j.ceramint.2019.08.273

Titel: Improving the grindability of Inconel 718 by hydrogen embrittlement in ultrasonic-assisted grinding
verfasst von: Sisi Li
Jiaping Qiao
Hanqiang Wu
Jiang Zeng
Haohao Cui
Feng Ming
Yongbo Wu
Publikationsdatum: 05.04.2021
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 7-8/2021
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-021-07022-5

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 7-8/2021

Numerical simulation on the nonaxisymmetry arc characteristics in narrow gap TIG welding: responses to welding parameters

Study on simulation and experiment of non-circular gear surface topography in ball end milling

Study of milling of low thickness thermoplastic carbon fiber composites in function of tool geometry and cutting conditions

Investigation of flat-clinching process using various thicknesses aluminum alloy sheets

Simulation and analysis of LPBF multi-layer single-track forming process under different particle size distributions

Effects of ultrasonic vibration on the deformation behavior of copper in micro-coining

Premium Partner

Marktübersichten