nach oben

Journal of Materials Engineering and Performance

Erschienen in:

14.03.2022 | Technical Article

Induction Welding of 304L Stainless Steel and Copper in Vacuum Environment

verfasst von: R. K. Bhogendro Meitei, Pabitra Maji, Pawan Kumar, Ranit Karmakar, Pritam Paul, Subrata Kumar Ghosh, Subhash Chandra Saha

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 9/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Welding of dissimilar metals like copper and 304L steel which is very difficult to achieve, was successfully carried out by induction welding in partial vacuum condition. Microstructural and spectroscopic analysis suggests a sound, crack and pore-free joint with diffusion of Fe and other alloying elements of steel in Cu side. Microhardness distribution suggests enhancement of copper microhardness near the interface. The interface microhardness and ultimate tensile strength of the joint as well as the elongation are improved with increase in current and load. The results indicate that the vacuum environment is beneficial in terms of tensile strength of the welded joints. Within the range of the present study, maximum tensile strength of about 97.92% of the un-welded copper is obtained for welding with 650 A and 2.5 kg load.

Vorheriger Artikel Isoxazoline Derivatives as Inhibitors for Mild Steel Corrosion in 1M H2SO4: Computational and Experimental Investigations

Nächster Artikel Preparation and Properties of Multiwalled Carbon Nanotube/Waterborne Polyurethane Superhydrophobic Conductive Coatings Using Electrostatic Spraying

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

M. Velu and S. Bhat, Metallurgical and Mechanical Examinations of Steel-Copper Joints Arc Welded Using Bronze and Nickel-Base Superalloy Filler Materials, Mater. Des., 2013, 47, p 793–809. https://doi.org/10.1016/j.matdes.2012.12.073CrossRef

M. Velu and S. Bhat, Experimental Investigations of Fracture and Fatigue Crack Growth of Copper-Steel Joints Arc Welded Using Nickel-Base Filler, Mater. Des., 2015, 67, p 244–260. https://doi.org/10.1016/j.matdes.2014.11.026CrossRef

R. Karmakar and S.K. Ghosh, in Effect of Composition and Process Parameter on Mechanical Properties of Composite Coating by Laser Cladding: An Overview. Lecture Notes in Mechanical Engineering, pp. 387–395 (2020)

T.A. Mai and A.C. Spowage, Characterisation of Dissimilar Joints in Laser Welding of Steel-Kovar, Copper-Steel and Copper-Aluminium, Mater. Sci. Eng. A, 2004, 374(1–2), p 224–233.CrossRef

C. Yao, B. Xu, X. Zhang, J. Huang, J. Fu and Y. Wu, Interface Microstructure and Mechanical Properties of Laser Welding Copper-Steel Dissimilar Joint, Opt. Lasers Eng., 2009, 47(7–8), p 807–814.CrossRef

S. Chen, J. Huang, J. Xia, X. Zhao and S. Lin, Influence of Processing Parameters on the Characteristics of Stainless Steel/Copper Laser Welding, J. Mater. Process. Technol., 2015, 222, p 43–51. https://doi.org/10.1016/j.jmatprotec.2015.03.003CrossRef

S. Tosto, F. Nenci, H. Jiandong, G. Corniani and F. Pierdominici, Microstructure of Copper-AISI Type 304L Electron Beam Welded Alloy, Mater. Sci. Technol., 2003, 19(4), p 519–522.CrossRef

I. Magnabosco, P. Ferro, F. Bonollo and L. Arnberg, An Investigation of Fusion Zone Microstructures in Electron Beam Welding of Copper-Stainless Steel, Mater. Sci. Eng. A, 2006, 424(1–2), p 163–173.CrossRef

J. He, D. Sirois, S. Li, M.A. Sullivan, C. Wikle and B.A. Chin, Ballistic Impact Welding of Copper to Low Carbon Steel, J. Mater. Process. Technol., 2016, 232, p 165–174. https://doi.org/10.1016/j.jmatprotec.2016.01.029CrossRef

10.

S.D. Kore, P.P. Date, S.V. Kulkarni, S. Kumar, D. Rani, M.R. Kulkarni, S.V. Desai, R.K. Rajawat, K.V. Nagesh and D.P. Chakravarty, Application of Electromagnetic Impact Technique for Welding Copper-to-Stainless Steel Sheets, Int. J. Adv. Manuf. Technol., 2011, 54(9–12), p 949–955.CrossRef

11.

O. Yilmaz and H. Çelik, Electrical and Thermal Properties of the Interface at Diffusion-Bonded and Soldered 304 Stainless Steel and Copper Bimetal, J. Mater. Process. Technol., 2003, 141(1), p 67–76.CrossRef

12.

A. Durgutlu, B. Gülenç and F. Findik, Examination of Copper/Stainless Steel Joints Formed by Explosive Welding, Mater. Des., 2005, 26(6), p 497–507.CrossRef

13.

Y. Wang, J. Luo, X. Wang and X. Xu, Interfacial Characterization of T3 Copper/35CrMnSi Steel Dissimilar Metal Joints by Inertia Radial Friction Welding, Int. J. Adv. Manuf. Technol., 2013, 68(5–8), p 1479–1490.CrossRef

14.

Y. Zhang, J. Huang, H. Chi, N. Cheng, Z. Cheng and S. Chen, Study on Welding-Brazing of Copper and Stainless Steel Using Tungsten/Metal Gas Suspended Arc Welding, Mater. Lett., 2015, 156, p 7–9. https://doi.org/10.1016/j.matlet.2015.04.128CrossRef

15.

Z. Cheng, J. Huang, Z. Ye, Y. Chen, J. Yang and S. Chen, Microstructures and Mechanical Properties of Copper-Stainless Steel Butt-Welded Joints by MIG-TIG Double-Sided Arc Welding, J. Mater. Process. Technol., 2019, 265, p 87–98. https://doi.org/10.1016/j.jmatprotec.2018.10.007CrossRef

16.

P. Yan, O.E. Güngör, P. Thibaux, M. Liebeherr and H.K.D.H. Bhadeshia, Tackling the Toughness of Steel Pipes Produced by High Frequency Induction Welding and Heat-Treatment, Mater. Sci. Eng. A, 2011, 528(29–30), p 8492–8499. https://doi.org/10.1016/j.msea.2011.07.034CrossRef

17.

T. Noda, T. Shimizu, M. Okabe and T. Iikubo, Joining of TiAl and Steels by Induction Brazing, Mater. Sci. Eng. A, 1997, 239–240(1–2), p 613–618.CrossRef

18.

P. He, J.C. Feng and W. Xu, Mechanical Property of Induction Brazing TiAl-Based Intermetallics to Steel 35CrMo Using AgCuTi Filler Metal, Mater. Sci. Eng. A, 2006, 418(1–2), p 45–52.CrossRef

19.

T.J. Ahmed, D. Stavrov, H.E.N. Bersee and A. Beukers, Induction Welding of Thermoplastic Composites-an Overview, Compos. Part A Appl. Sci. Manuf., 2006, 37(10), p 1638–1651.CrossRef

20.

M. Chen, X. Song, Q. Lv, Z. Gan and S. Liu, Bonding of Carbon Nanotubes onto Microelectrodes by Localized Induction Heating, Sens. Actuators A Phys., 2011, 170(1–2), p 202–206. https://doi.org/10.1016/j.sna.2011.06.016CrossRef

21.

P. Mitschang, R. Velthuis and M. Didi, Induction Spot Welding of Metal/CFRPC Hybrid Joints, Adv. Eng. Mater., 2013, 15(9), p 804–813.CrossRef

22.

R.K. Bhogendro Meitei, P. Maji, A. Samadhiya, S.K. Ghosh, B.S. Roy, A.K. Das and S.C. Saha, A Study on Induction Welding of Mild Steel and Copper with Flux under Applied Load Condition, J. Manuf. Process., 2018, 34, p 435–441. https://doi.org/10.1016/j.jmapro.2018.06.029CrossRef

23.

R.K. Bhogendro Meitei, P. Maji, A. Samadhiya, R. Karmakar, S.K. Ghosh and S.C. Saha, An Experimental Investigation on Joining of Copper and Stainless Steel by Induction Welding Technique, Int. J. Precis. Eng. Manuf., 2019 https://doi.org/10.1007/s12541-019-00284-wCrossRef

24.

S. Katayama, Y. Kobayashi, M. Mizutani and A. Matsunawa, Effect of Vacuum on Penetration and Defects in Laser Welding, J. Laser Appl., 2001, 13(5), p 187–192.CrossRef

25.

S. Katayama, A. Yohei, M. Mizutani and Y. Kawahito, Development of Deep Penetration Welding Technology with High Brightness Laser under Vacuum, Phys. Procedia, 2022, 12, p 75–80.CrossRef

26.

U. Reisgen, S. Olschok, S. Jakobs and C. Turner, Sound Welding of Copper: Laser Beam Welding in Vacuum, Phys. Procedia, 2016, 83, p 447–454.CrossRef

27.

L. Li, G. Mi and C. Wang, A Comparison between Induction Pre-Heating and Induction Post-Heating of Laser-Induction Hybrid Welding on S690QL Steel, J. Manuf. Process., 2018, 2019(43), p 276–291.

28.

Y. Poo-arporn, S. Duangnil, D. Bamrungkoh, P. Klangkaew, C. Huasranoi, P. Pruekthaisong, S. Boonsuya, J. Chaiprapa, A. Ruangvittayanon and C. Saisombat, Gas Tungsten Arc Welding of Copper to Stainless Steel for Ultra-High Vacuum Applications, J. Mater. Process. Technol., 2020, 277, p 116490. https://doi.org/10.1016/j.jmatprotec.2019.116490CrossRef

29.

A.A. Shirzadi, H. Assadi and E.R. Wallach, Interface Evolution and Bond Strength When Diffusion Bonding Materials with Stable Oxide Films, Surf. Interface Anal., 2001, 31(7), p 609–618.CrossRef

30.

R. Saranarayanan, A.K. Lakshminarayanan and B. Venkatraman, A Combined Full-Field Imaging and Metallography Approach to Assess the Local Properties of Gas Tungsten Arc Welded Copper-Stainless Steel Joints, Arch. Civ. Mech. Eng., 2019, 19(1), p 251–267. https://doi.org/10.1016/j.acme.2018.08.009CrossRef

31.

Q. Nguyen, A. Azadkhou, M. Akbari, A. Panjehpour and A. Karimipour, Experimental Investigation of Temperature Field and Fusion Zone Microstructure in Dissimilar Pulsed Laser Welding of Austenitic Stainless Steel and Copper, J. Manuf. Process., 2020, 56, p 206–215.CrossRef

32.

Y. Meng, X. Li, M. Gao and X. Zeng, Microstructures and Mechanical Properties of Laser-Arc Hybrid Welded Dissimilar Pure Copper to Stainless Steel, Opt. Laser Technol., 2019, 111, p 140.CrossRef

33.

M.H. Bina, F. Dehghani and M. Salimi, Effect of Heat Treatment on Bonding Interface in Explosive Welded Copper/Stainless Steel, Mater. Des., 2013, 45, p 504–509. https://doi.org/10.1016/j.matdes.2012.09.037CrossRef

34.

M. Bahrami, K. Dehghani and M.K. Besharati Givi, A Novel Approach to Develop Aluminum Matrix Nano-Composite Employing Friction Stir Welding Technique, Mater. Des., 2014, 53, p 217–225. https://doi.org/10.1016/j.matdes.2013.07.006CrossRef

35.

P. Maji, S.K. Ghosh, R.K. Nath and R. Karmakar, Microstructural, Mechanical and Wear Characteristics of Aluminum Matrix Composites Fabricated by Friction Stir Processing, J. Braz. Soc. Mech. Sci. Eng., 2020, 42(4), p 191. https://doi.org/10.1007/s40430-020-02279-5CrossRef

36.

A.H. Blake and C.H. Cáceres, Solid Solution Effects on the Tensile Behaviour of Concentrated Mg-Zn Alloys, Essent. Read. Magnes. Technol., 2014, 9781118858943, p 263–267.CrossRef

37.

M. Moeser, Fractography with the SEM (failure analysis). http://martin-moeser.de/. Accessed 01 May 2016 (2016)

38.

S.G. Shiri, M. Nazarzadeh, M. Sharifitabar and M.S. Afarani, Gas Tungsten Arc Welding of CP-Copper to 304 Stainless Steel Using Different Filler Materials, Trans. Nonferrous Met. Soc. China, 2012, 22(12), p 2937–2942. https://doi.org/10.1016/S1003-6326(11)61553-7CrossRef

39.

C.C. Chang, L.H. Wu, C. Shueh, C.K. Chan, I.C. Shen and C.K. Kuan, Evaluation of Microstructure and Mechanical Properties of Dissimilar Welding of Copper Alloy and Stainless Steel, Int. J. Adv. Manuf. Technol., 2017, 91(5–8), p 2217–2224. https://doi.org/10.1007/s00170-016-9956-7CrossRef

Titel: Induction Welding of 304L Stainless Steel and Copper in Vacuum Environment
verfasst von: R. K. Bhogendro Meitei
Pabitra Maji
Pawan Kumar
Ranit Karmakar
Pritam Paul
Subrata Kumar Ghosh
Subhash Chandra Saha
Publikationsdatum: 14.03.2022
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 9/2022
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-022-06773-w

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 9/2022

Isoxazoline Derivatives as Inhibitors for Mild Steel Corrosion in 1M H2SO4: Computational and Experimental Investigations

Investigation on the Precipitation Behavior of a Ni-Based Alloy Containing Tungsten during Thermal Exposure at 850 °C

Microstructure and Crystallographic Texture Evolution during Isothermal Annealing of Cold-Rolled Fe-6.8Al Low-Density Steel

Analysis of Local Strain Evolution during Electron Beam Welding of Hot Crack Sensitive Nickel Base Conventionally Cast Alloy 247 LC CC

Optimization of Cutting Conditions, Parameters, and Cryogenic Heat Treatment for Surface Roughness in Milling of NiTi Shape Memory Alloy

Interface Reaction between Tin Solder and Nanocrystalline Ni and Ni-Mo Coatings Obtained by Electrodeposition

Premium Partner

Marktübersichten