nach oben

Erschienen in:

2024 | OriginalPaper | Buchkapitel

Influence of Solidification Rate and Impurity Content on 5/7-Crossover Alloys

verfasst von : Sebastian Samberger, Lukas Stemper, Peter J. Uggowitzer, Ramona Tosone, Stefan Pogatscher

Erschienen in: Light Metals 2024

Verlag: Springer Nature Switzerland

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In view of an upcoming scrap wave and the need for products with lower carbon footprint, there is an urgent need to increase the recycled fraction in wrought aluminum alloys. However, due to the narrow compositional limits of conventional aluminum wrought alloys and the higher impurity levels in scrap material, the applicable recycling content is limited. Therefore, new approaches need to be identified to increase the recycled content. The introduction of the AlMgZn(Cu) Crossover alloy concept may prove to be a step forward in escaping the corset of conventional alloying systems. The 5/7-Crossover alloy not only overcomes the long-standing trade-off between the excellent formability of 5xxx-series alloys and the outstanding strength of 7xxx-series alloys by combining both properties but may also tolerate a higher content of impurity elements. The scope of this study is to properly address the 5/7-Crossover alloy’s sustainability in terms of its ability to be manufactured from secondary raw materials. AlMgZn(Cu) alloys with different tramp element concentrations were investigated.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Enhancing Recycling Efficiency and Critical Raw Material Substitution in 6xxx Alloys’ Production with Respect to Their Extrusion Feasibility and Mechanical Properties

Nächstes Kapitel Influence of Increased Fe, Cu, and Zn Concentrations on Phase Formation in Aluminum A356 (AlSi7Mg0.3) Alloy

Hirsch J (2011) Aluminium in Innovative Light-Weight Car Design. Materials Transactions 52:818–824. https://doi.org/10.2320/matertrans.L-MZ201132.CrossRef

Hirsch J, Søreide J, Payer T (2020) Environmental Advantages of Sustainable Aluminum Structures. Proceedings of 14th International Aluminium Conference (INALCO-2019) (Environmental Advantages of Sustainable Aluminum Structures). Japan Light Metal Welding Association & Japan Aluminium Association vol. 58:125–130.

Carle D, Blount G (1999) The suitability of aluminium as an alternative material for car bodies. Materials & Design 20:267–272. https://doi.org/10.1016/S0261-3069(99)00003-5.CrossRef

Das SK, Green JA, Kaufman JG (2007) The development of recycle-friendly automotive aluminum alloys. JOM 57:47–51.CrossRef

AMAG Austria Metall AG AluReport 02 2022.

AMAG Austria Metall AG AluReport 01 2023.

Stemper L, Tunes MA, Tosone R et al. (2021) On the potential of aluminum crossover alloys. Progress in Materials Science. https://doi.org/10.1016/j.pmatsci.2021.100873.CrossRef

Stemper L, Tunes MA, Dumitraschkewitz P et al. (2021) Giant hardening response in AlMgZn(Cu) alloys. Acta Materialia 206:116617. https://doi.org/10.1016/j.actamat.2020.116617.CrossRef

Pan Y, Di Zhang, Liu H et al. (2021) Precipitation hardening and intergranular corrosion behavior of novel Al–Mg–Zn(-Cu) alloys. Journal of Alloys and Compounds 853:157199. https://doi.org/10.1016/j.jallcom.2020.157199.CrossRef

10.

Cao C, Di Zhang, Wang X et al. (2016) Effects of Cu addition on the precipitation hardening response and intergranular corrosion of Al-5.2Mg-2.0Zn (wt.%) alloy. Materials Characterization 122:177–182. https://doi.org/https://doi.org/10.1016/j.matchar.2016.11.004.CrossRef

11.

Caroll MC, Mills MJ, Daehn GS et al. (2000) Effects of Zn additions on the grain boundary precipitation and corrosion of Al-5083. Scripta Materialia 42:335–340.CrossRef

12.

Meng C, Di Zhang, Zhuang L et al. (2016) Correlations between stress corrosion cracking, grain boundary precipitates and Zn content of Al–Mg–Zn alloys. Journal of Alloys and Compounds 655:178–187. https://doi.org/10.1016/j.jallcom.2015.09.159.CrossRef

13.

Geng Y, Di Zhang, Zhang J et al. (2020) On the suppression of Lüders elongation in high-strength Cu/Zn modified 5xxx series aluminum alloy. Journal of Alloys and Compounds 834:155138. https://doi.org/10.1016/j.jallcom.2020.155138.CrossRef

14.

Geng Y, Di Zhang, Zhang J et al. (2020) Zn/Cu regulated critical strain and serrated flow behavior in Al–Mg alloys. Materials Science and Engineering: A 795:139991. https://doi.org/10.1016/j.msea.2020.139991.CrossRef

15.

Løvik AN, Modaresi R, Müller DB (2014) Long-term strategies for increased recycling of automotive aluminum and its alloying elements. Environ Sci Technol 48:4257–4265. https://doi.org/10.1021/es405604g.CrossRef

16.

Que Z, Wang Y, Mendis CL et al. (2022) Understanding Fe-Containing Intermetallic Compounds in Al Alloys: An Overview of Recent Advances from the LiME Research Hub. Metals 12:1677. https://doi.org/10.3390/met12101677.CrossRef

17.

Que Z, Zhou Y, Wang Y et al. (2021) Effects of Mg addition on the Al6(Fe,Mn) intermetallic compounds and the grain refinement of α-Al in Al-Fe-Mn alloys. Materials Characterization 171:110758. https://doi.org/10.1016/j.matchar.2020.110758.CrossRef

18.

Trink B, Weißensteiner I, Uggowitzer PJ et al. (2023) Processing and microstructure–property relations of Al-Mg-Si-Fe crossover alloys. Acta Materialia 257:119160. https://doi.org/10.1016/j.actamat.2023.119160.CrossRef

19.

Engler O, Kuhnke K, Hasenclever J (2017) Development of intermetallic particles during solidification and homogenization of two AA 5xxx series Al-Mg alloys with different Mg contents. Journal of Alloys and Compounds 728:669–681. https://doi.org/10.1016/j.jallcom.2017.09.060.CrossRef

20.

Schmid F, Stemper L, Ebner T et al. (2019) Industry-oriented sample preparation of 6xxx and 5xxx aluminium alloys in laboratory. Proceedings of EMC 2019.

21.

Bartosiaki BG, Pereira JAM, Bielefeldt WV et al. (2015) Assessment of inclusion analysis via manual and automated SEM and total oxygen content of steel. Journal of Materials Research and Technology 4:235–240. https://doi.org/10.1016/j.jmrt.2015.01.008.CrossRef

22.

Nuspl M, Wegscheider W, Angeli J et al. (2004) Qualitative and quantitative determination of micro-inclusions by automated SEM/EDX analysis. Anal Bioanal Chem 379:640–645. https://doi.org/10.1007/s00216-004-2528-y.CrossRefPubMed

23.

Walusinski O (2018) Doctoral Thesis. In: Walusinski O (ed) Georges Gilles de la Tourette. Oxford University Press, pp 129–144.CrossRef

24.

Corti CW, Cotterill P, Fitzpatrick GA (1974) The Evaluation of the Interparticle Spacing in Dispersion Alloys. International Metallurgical Reviews 19:77–88. https://doi.org/10.1179/imtlr.1974.19.1.77.CrossRef

25.

Bale CW, Chartrand P, Degterov SA et al. (2002) FactSage thermochemical software and databases. Calphad 26:189–228. https://doi.org/10.1016/S0364-5916(02)00035-4.CrossRef

26.

Ostermann F (2007) Anwendungstechnologie Aluminium, 2nd edn. Springer, Berlin Heidelberg.CrossRef

27.

Belov NA, Aksenov AA, Eskin DG (2002) Iron in Aluminium Alloys. CRC Press, London.CrossRef

28.

Liu Y, Luo L, Han C et al. (2016) Effect of Fe, Si and Cooling Rate on the Formation of Fe- and Mn-rich Intermetallics in Al–5Mg–0.8Mn Alloy. Journal of Materials Science & Technology 32:305–312. https://doi.org/10.1016/j.jmst.2015.10.010.CrossRef

29.

Závodská D, Tillová E, Švecová I et al. (2019) The Effect of Iron Content on Microstructure and Porosity of Secondary AlSi7Mg0.3 Cast Alloy. Period Polytech Transp Eng 47:283–289. https://doi.org/10.3311/PPtr.12101.CrossRef

Titel: Influence of Solidification Rate and Impurity Content on 5/7-Crossover Alloys
verfasst von: Sebastian Samberger
Lukas Stemper
Peter J. Uggowitzer
Ramona Tosone
Stefan Pogatscher
Verlag: Springer Nature Switzerland
Buch: Light Metals 2024
Print ISBN: 978-3-031-50307-8

Electronic ISBN: 978-3-031-50308-5

Copyright-Jahr: 2024
DOI: https://doi.org/10.1007/978-3-031-50308-5_28

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht