nach oben

Journal of Materials Engineering and Performance

Erschienen in:

03.01.2019

Influence of Wear Test Parameters on the Electrical Contact Performance of Brass Alloy/Copper Contactors Under Fretting Wear

verfasst von: Xinlong Liu, Zhenbing Cai, Shanbang Liu, Songbo Wu, Minhao Zhu

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 2/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Fretting of mated electronic connectors may be due to extreme increase in contact resistance. We present a detailed analysis of contact resistance by fretting experiments using brass alloys/copper contact pairs. The relationship between wear mechanisms and contact resistance was determined. The influence of fundamental factors such as normal load, displacement amplitude, and current on contact resistance change was also evaluated. It was found out that displacement amplitude, normal load, and current are important parameters for infinite lifetime or stable electrical resistance during fretting condition. Influence of displacement amplitude on the electrical contact performance might be affected by wear debris in the contact area. Electric contact performance could be improved by increasing the power current, which could break down the thick oxide film formed. The predicted working lifetime and reliability requirements of the connector were determined to optimize and extend the service life under the working condition.

Vorheriger Artikel Initial Studies on Development of High-Performance Nano-structured Fe2O3 Catalysts for Solid Rocket Propellants

Nächster Artikel Effect of Oxygen Content on Wear and Cutting Performance of AlCrON Coatings

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

H. Chang, C.H. Pitt, and G.B. Alexander, Novel Method for Preparation of Silver-Tin Oxide Electrical Contacts, J. Mater. Eng. Perform., 1992, 1, p 255–260CrossRef

J.W. Mcbride, The Relationship Between Surface Wear and Contact Resistance During the Fretting of in vivo Electrical Contacts, IEEE Trans. Compon. Packag. Technol., 2008, 31, p 592–600CrossRef

Z. Wei, L. Zhang, and T. Shen, Effects of Oxide-Modified Spherical ZnO on Electrical Properties of Ag/ZnO Electrical Contact Material, J. Mater. Eng. Perform., 2016, 134, p 1–10

L. Kogut and K. Komvopoulos, Electrical Contact Resistance Theory for Conductive Rough Surfaces, J. Appl. Phys., 2003, 94, p 3153–3162CrossRef

J. Hu, K. Zhang, and Q. Yang, Fretting Behaviors of Interface Between CFRP and Coated Titanium Alloy in Composite Interference-Fit Joints Under Service Condition, Mater. Des., 2017, 134, p 91–102CrossRef

Z. Kong and J. Swingler, Combined Effects of Fretting and Pollutant Particles on the Contact Resistance of the Electrical Connectors, Prog. Nat. Sci. Mater. Int., 2017, 27, p 385–390CrossRef

S. Sett, K. Das, and A.K. Raychaudhuri, Investigation of Factors Affecting Electrical Contacts on Single Germanium Nanowires, J. Appl. Phys., 2017, 121, p 124503CrossRef

Z. Kong, R. Huang, and L. Xu, in International Conference on Electrical Contacts. IET. Investigation of electrical properties and morphology of several contact materials after cyclic damp-heat and sliding, 2012, p 426–429

H. Sun, Q. Zhou, and J. Zhu, Analysis on the Fracture of Al-Cu Dissimilar Materials Friction Stir Welding Lap Joint, j. Mater. Eng. Perform., 2017, 26, p 1–8CrossRef

10.

J. Chen, F. Yang, and K. Luo, Experimental Investigation on the Electrical Contact Behavior of Rolling Contact Connector, Rev. Sci. Instrum., 2015, 86, p 125110CrossRef

11.

G. Li, X. Fang, and W. Feng, In situ Formation and Doping of Ag/SnO₂ Electrical Contact Materials, J. Alloy. Compd., 2017, 716, p 106–111CrossRef

12.

B.D. Jensen, L.W. Chow, and K. Huang, Effect of Nanoscale Heating on Electrical Transport in RF MEMS Switch Contacts, J. Microelectromech. Syst., 2005, 14, p 935–946CrossRef

13.

H. Yu, M.T. Kesim, and Y. Sun, Extended Aging of Ag/W Circuit Breaker Contacts: Influence on Surface Structure, Electrical Properties, and UL Testing Performance, J. Mater. Eng. Perform., 2016, 25, p 91–101CrossRef

14.

E. Larsson, A.M. Andersson, and Å.K. Rudolphi, Grease Lubricated Fretting of Silver Coated Copper Electrical Contacts, Wear, 2017, 376, p 634–642CrossRef

15.

E. Mengotti, L.I. Duarte, and J. Pippola, Fretting Corrosion: Analysis of the Failure Mechanism for Low Voltage Drives Applications, Microelectron. Reliab., 2014, 54, p 2109–2114CrossRef

16.

X.L. Liu, Z.B. Cai, S.B. Liu et al., Effect of Roughness on Electrical Contact Performance of Electronic Components, Microelectron. Reliab., 2017, 74, p 100–109CrossRef

17.

M. Rashid, Some Tribological Influences on the Electrode-Worksheet Interface During Resistance Spot Welding of Aluminum Alloys, J. Mater. Eng. Perform., 2011, 20, p 456–462CrossRef

18.

J. Neijzen and J. Glashorster, Fretting Corrosion of Tin-Coated Electrical Contacts, IEEE Trans. Compon. Hybrids Manuf. Technol., 1987, 10, p 68–74CrossRef

19.

T. Liskiewicz, A. Neville, and S. Achanta, in IEEE Holm Conference on Proceedings of the Fifty-Second. IEEE. Impact of corrosion on fretting damage of electrical contacts, Electrical contacts-2006, 2006, p 257–262.

20.

R. Ramesh and R. Gnanamoorthy, Artificial Neural Network Prediction of Fretting Wear Behavior of Structural Steel, En 24 Against Bearing Steel, En 31, J. Mater. Eng. Perform., 2007, 16, p 703–709CrossRef

21.

H.J. Noh, J.W. Kim, and S.M. Lee, Effect of Grain Size on the Electrical Failure of Copper Contacts in Fretting Motion, Tribol. Int., 2017, 111, p 39–45CrossRef

22.

V. Deeva and S. Slobodyan, Influence of Gravity and Thermodynamics on the Sliding Electrical Contact, Tribol. Int., 2017, 105, p 299–303CrossRef

23.

J. Xu and K. Li, The Research on Resistance of Electrical Contact, Electr. Eng. Mater., 2011, 1, p 003

24.

K. Mashimo, and Y. Ishimaru, in 2011 IEEE 57th Holm Conference on Electrical Contacts (Holm). Computational modeling and analysis of a contact pair for the prediction of fretting dependent electrical contact resistance. 2011, p. 1–6.

25.

J. Yifu, K. Weicheng, and S. Tianyuan, Effect of Load on Friction-Wear Behavior of HVOF-Sprayed WC-12Co Coatings, J. Mater. Eng. Perform., 2017, 26, p 3465–3473CrossRef

26.

K.S. Weil, High-Temperature Electrical Testing of a Solid Oxide Fuel Cell Cathode Contact Material, J. Mater. Eng. Perform., 2004, 13, p 309–315CrossRef

27.

M. Tan, X. Wang, and Y. Hao, Novel Ag Nanowire Array with High Electrical Conductivity and Fast Heat Transfer Behavior as the Electrode for Film Devices, J. Alloy. Compd., 2017, 701, p 49–54CrossRef

28.

D.D.L. Chung, Electrical Conduction Behavior of Cement-Matrix Composites, J. Mater. Eng. Perform., 2002, 11, p 194–204CrossRef

29.

K. Krishnaveni, T.S.N.S. Narayanan, and S.K. Seshadri, Electrodeposited Ni–B Coatings: Formation and Evaluation of Hardness and Wear Resistance, Surf. Coat. Technol., 2006, 99, p 300–308

30.

Z. Wei, L. Zhang, and T. Shen, Effects of Oxide-Modified Spherical ZnO on Electrical Properties of Ag/ZnO Electrical Contact Material, J. Mater. Eng. Perform., 2016, 25, p 3662–3671CrossRef

31.

X.Q. Wei, B.Y. Man, and M. Liu, Blue Luminescent Centers and Microstructural Evaluation by XPS and Raman in ZnO Thin Films Annealed in Vacuum, N2, and O2, Phys. B Phys. Condens. Matter., 2007, 388, p 145–152CrossRef

32.

G.D. Khattak, A. Mekki, and M.A. Gondal, Effect of Laser Irradiation on the Structure and Valence States of Copper in Cu-Phosphate Glass by XPS Studies, Appl. Surf. Sci., 2010, 256, p 3630–3635CrossRef

33.

J.P. Espinós, J. Morales, and A. Barranco, Interface Effects for Cu, CuO, and Cu₂O Deposited on SiO₂ and ZrO₂ XPS Determination of the Valence State of Copper in Cu/SiO₂ and Cu/ZrO₂ Catalysts, J. Phys. Chem. B, 2002, 106, p 6921–6929CrossRef

34.

Y.K. Hsu, Y.C. Chen, and Y.G. Lin, Characteristics and Electrochemical Performances of Lotus-Like CuO/Cu(OH) 2, Hybrid Material Electrodes, J. Electroanal. Chem., 2012, 673, p 43–47CrossRef

35.

S. Anandan, G.J. Lee, and J.J. Wu, Sonochemical Synthesis of CuO Nanostructures with Different Morphology, Ultrason. Sonochem., 2012, 19, p 682–686CrossRef

36.

J. Xu, Y. Chang, and Y. Zhang, Effect of Silver Ions on the Structure of ZnO and Photocatalytic Performance of Ag/ZnO Composites, Appl. Surf. Sci., 2008, 255, p 1996–1999CrossRef

37.

W. Yang, Z. Liu, and D.L. Peng, Room-Temperature Deposition of Transparent Conducting Al-Doped ZnO Films by RF Magnetron Sputtering Method, Appl. Surf. Sci., 2009, 255, p 5669–5673CrossRef

38.

R. Al-Gaashani, S. Radiman, and A.R. Daud, XPS and Optical Studies of Different Morphologies of ZnO Nanostructures Prepared by Microwave Methods, Ceram. Int., 2013, 39, p 2283–2292CrossRef

39.

M. Chen, X. Wang, and Y.H. Yu, X-ray Photoelectron Spectroscopy and Auger Electron Spectroscopy Studies of Al-Doped ZnO Films, Appl. Surf. Sci., 2000, 158, p 134–140CrossRef

40.

G. Ballerini, K. Ogle, and M.G. Barthés-Labrousse, The Acid-Base Properties of the Surface of Native Zinc Oxide Layers: an XPS Study of Adsorption of 1,2-Diaminoethane, Appl. Surf. Sci., 2007, 253, p 6860–6867CrossRef

Titel: Influence of Wear Test Parameters on the Electrical Contact Performance of Brass Alloy/Copper Contactors Under Fretting Wear
verfasst von: Xinlong Liu
Zhenbing Cai
Shanbang Liu
Songbo Wu
Minhao Zhu
Publikationsdatum: 03.01.2019
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 2/2019
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-018-3821-9

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2019

A Perspective on Solid-State Additive Manufacturing of Aluminum Matrix Composites Using MELD

Microstructure and Mechanical Behavior of Friction Stir-Welded Sc-Modified Al-Zn-Mg Alloys Made Using Different Base Metal Tempers

Corrosion of Mild Steel Buried Underground for 3 Years in Different Soils of Varying Textures

Microstructural Properties of Heat-Treated LENS In Situ Additively Manufactured Titanium Aluminide

Brazing of Martensitic Stainless Steel to Copper Using Electroplated Copper and Silver Coatings

Hot Deformation Mechanisms of Ti22Al25Nb Orthorhombic Alloy

Premium Partner

Marktübersichten