nach oben

Rare Metals

Erschienen in:

20.11.2023 | Original Article

Interface strengthening for thermal sprayed WC-10Co4Cr coating subjected to pulsed magnetic treatment

verfasst von: Cheng-Kai Qian, Qu Liu, Heng Wang, Ke-Jian Li, Zhi-Peng Cai

Erschienen in: Rare Metals | Ausgabe 2/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The reliability of the coated industry components demands ideal fatigue properties of the coating, and it is mainly determined by the performance of the interfaces. In this study, pulsed magnetic treatment (PMT) was applied to the thermal sprayed WC-10Co4Cr coating, and the fatigue lifetime of the coated bolt increased by 219.82% under an imitation of the operating mode condition. Scratch tests further proved that both the adhesion and cohesion strength were improved after PMT, and they benefit from the interface strengthening effects. The formation of coherent WC/Co interfaces was characterized by in-situ transmission electron microscopy (TEM), and the molecular dynamic simulations indicate that the work of separation of these interfaces is much higher than the original disordered ones. Residual stress was relaxed and distributed more homogeneously after PMT, and it mainly contributes to the coating/substrate strengthening. This work provides a new post-treatment method focusing on the interfaces in the WC-based coating and gives insight into its mechanism so that it is hopeful to be applied to other kinds of coatings.

Graphical abstract

Vorheriger Artikel Insight into vertical piezoelectric characteristics regulated thermal transport in van der Waals two-dimensional materials

Nächster Artikel Universal paradigm of ternary metacomposites with tunable epsilon-negative and epsilon-near-zero response for perfect electromagnetic shielding

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

[1]

Matikainen V, Koivuluoto H, Vuoristo P. A study of Cr₃C₂-based HVOF- and HVAF-sprayed coatings: abrasion, dry particle erosion and cavitation erosion resistance. Wear. 2020;446:203188. https://doi.org/10.1016/j.wear.2020.203188.CrossRef

[2]

Lamana MS, Pukasiewicz AGM, Sampath S. Influence of cobalt content and HVOF deposition process on the cavitation erosion resistance of WC-Co coatings. Wear. 2018;398:209. https://doi.org/10.1016/j.wear.2017.12.009.CrossRef

[3]

Zhou YK, Liu XB, Kang JJ, Yue W, Qin WB, Ma GZ, Fu ZQ, Zhu LN, She DS, Wang HD, Liang J, Weng W, Wang CB. Corrosion behavior of HVOF sprayed WC-10Co-4Cr coatings in the simulated seawater drilling fluid under the high pressure. Eng Fail Anal. 2020;109:104338. https://doi.org/10.1016/j.engfailanal.2019.104338.CrossRef

[4]

Hong S, Wu YP, Gao WW, Zhang JF, Zheng YG, Zheng Y. Slurry erosion-corrosion resistance and microbial corrosion electrochemical characteristics of HVOF sprayed WC–10Co–4Cr coating for offshore hydraulic machinery. Int J Refract Metal Hard Mater. 2018;74:7. https://doi.org/10.1016/j.ijrmhm.2018.02.019.CrossRef

[5]

Kiilakoski J, Langlade C, Koivuluoto H, Vuoristo P. Characterizing the micro-impact fatigue behavior of APS and HVOF-sprayed ceramic coatings. Surf Coat Technol. 2019;371:245. https://doi.org/10.1016/j.surfcoat.2018.10.097.CrossRef

[6]

Ibrahim A, Berndt CC. Fatigue and deformation of HVOF sprayed WC–Co coatings and hard chrome plating. Mater Sci Eng A Struct Materi Prop Microstruct Process. 2007;456(1–2):114. https://doi.org/10.1016/j.msea.2006.12.030.CrossRef

[7]

Gui M, Eybel R, Asselin B, Monerie-Moulin F. Cracking and spalling behavior of HVOF thermally sprayed WC–Co–Cr coating in bend and axial fatigue tests. J Mater Eng Perform. 2015;24(3):1347. https://doi.org/10.1007/s11665-014-1378-9.CrossRef

[8]

Garcia JR, Fernandez JE, Cuetos JM, Costales FG. Fatigue effect of WC coatings thermal sprayed by HVOF and laser treated, on medium carbon steel. Eng Fail Anal. 2011;18(7):1750. https://doi.org/10.1016/j.engfailanal.2011.03.026.CrossRef

[9]

Baragetti S, Gerosa R, Villa F. WC/C coating protection effects on 7075-T6 fatigue strength in an aggressive environment. In: Proceedings of the 17th international colloquium on mechanical fatigue of metals (ICMFM), Verbania, Italy. 2014. 33.

[10]

Prasad DS, Radha PT, Shoba C, Rao PS. Dynamic mechanical behavior of WC-Co coated A356.2 aluminum alloy. J Alloys Compd. 2018;767:988. https://doi.org/10.1016/j.jallcom.2018.07.203.CrossRef

[11]

Lamana MS, Pukasiewicz AGM, Sampath S. Influence of cobalt content and HVOF deposition process on the cavitation erosion resistance of WC-Co coatings. Wear. 2018;398–399:209. https://doi.org/10.1016/j.wear.2017.12.009.CrossRef

[12]

Shi KH, Zhou KC, Li ZY, Zan XQ, Dong KL. Microstructure and properties of ultrafine WC-Co-VC cemented carbides with different Co contents. Rare Met. 2022;41(6):1995. https://doi.org/10.1007/s12598-014-0424-y.CrossRef

[13]

Stokes J, Looney L. Residual stress in HVOF thermally sprayed thick deposits. Surf Coat Technol. 2004;177:18. https://doi.org/10.1016/j.surfcoat.2003.06.003.CrossRef

[14]

Puchi-Cabrera ES, Staia MH, Santana YY, Mora-Zorrilla EJ, Lesage J, Chicot D, La Barbera-Sosa JG, Ochoa-Perez E, Villalobos-Gutierrez CJ. Fatigue behavior of AA7075-T6 aluminum alloy coated with a WC-10Co-4Cr cermet by HVOF thermal spray. Surf Coat Technol. 2013;220:122. https://doi.org/10.1016/j.surfcoat.2012.04.087.CrossRef

[15]

Hernandez L, Oliveira F, Berrios JA, Villalobos C, Pertuz A, Cabrera ESP. Fatigue properties of a 4340 steel coated with a colmonoy 88 deposit applied by high-velocity oxygen fuel. Surf Coat Technol. 2000;133:68. https://doi.org/10.1016/s0257-8972(00)00874-4.CrossRef

[16]

Baragetti S, Gerosa R, Villa F. Step loading corrosion fatigue testing of 7075-T6 WC/C coated specimens in air and methanol. Eng Fract Mech. 2016;164:106. https://doi.org/10.1016/j.engfracmech.2016.02.027.CrossRef

[17]

Mingard KP, Jones HG, Gee MG, Roebuck B, Nunn JW. In situ observation of crack growth in a WC-Co hardmetal and characterisation of crack growth morphologies by EBSD. Int J Refract Metal Hard Mater. 2013;36:136. https://doi.org/10.1016/j.ijrmhm.2012.08.006.CrossRef

[18]

Csanádi T, Vojtko M, Dusza J. Deformation and fracture of WC grains and grain boundaries in a WC-Co hardmetal during microcantilever bending tests. Int J Refract Met Hard Mater. 2020;87:105163. https://doi.org/10.1016/j.ijrmhm.2019.105163.CrossRef

[19]

Elizalde MR, Ocaña I, Alkorta J, Sánchez-Moreno JM. Mechanical strength assessment of single WC–WC interfaces present in WC-Co hardmetals through micro-beam bending experiments. Int J Refract Metal Hard Mater. 2018;72:39. https://doi.org/10.1016/j.ijrmhm.2017.12.009.CrossRef

[20]

Li WY, Cao CC, Yin S. Solid-state cold spraying of Ti and its alloys: a literature review. Prog Mater Sci. 2020;110:100633. https://doi.org/10.1016/j.pmatsci.2019.100633.CrossRef

[21]

Munteanu C, Paleu V, Istrate B, Dascălu A, Cîrlan PC, Bhaumik S, Ancaş AD. Tribological behavior and microstructural analysis of atmospheric plasma spray deposited thin coatings on cardan cross spindles. Materials. 2021;14(23):7322. https://doi.org/10.3390/ma14237322.CrossRef

[22]

Wang H, Li Y, Gee M, Zhang H, Liu X, Song X. Sliding wear resistance enhancement by controlling W₂C precipitation in HVOF sprayed WC-based cermet coating. Surf Coat Technol. 2020;387:125533. https://doi.org/10.1016/j.surfcoat.2020.125533.CrossRef

[23]

Chen X, Wang HT, Ji GC, Bai XB, Fu W. Microstructure and properties of TiB₂–Ni coatings with different binder phase contents deposited by HVOF spray process. Rare Met. 2022;41:1385. https://doi.org/10.1007/s12598-015-0528-z.CrossRef

[24]

Zhang SH, Cho TY, Yoon JH, Li MX, Shum PW, Kwon SC. Investigation on microstructure, surface properties and anti-wear performance of HVOF sprayed WC–CrC–Ni coatings modified by laser heat treatment. Mater Sci Eng B Adv Funct Solid-State Mater. 2009;162(2):127. https://doi.org/10.1016/j.mseb.2009.03.017.CrossRef

[25]

Wang T, Ye FX. The elevated-temperature wear behavior evolution of HVOF sprayed tungsten carbide coatings: Respond to heat treatment. Int J Refract Metal Hard Mater. 2018;71:92. https://doi.org/10.1016/j.ijrmhm.2017.11.007.CrossRef

[26]

Hang ZQ, Xi NY, Liu Y, Liu Y, Chen H. High-temperature oxidation behavior of HVOF-sprayed rare earth-modified WC-12Co coating. Rare Met. 2022;41:3895. https://doi.org/10.1007/s12598-018-1075-1.CrossRef

[27]

Wang J, Zhang Z. Thermal deformation strengthening of WC-10Co4Cr coating prepared by high velocity air-fule process. Mater Res Express. 2020;7(3):036528. https://doi.org/10.1088/2053-1591/ab7fc4.CrossRef

[28]

Badylevich MV, Iunin YL, Kveder VV, Orlov VI, Osipyan YA. Influence of magnetic field on critical stress and mobility of dislocations in silicon. Solid State Phenom. 2004;95–96:433. https://doi.org/10.4028/www.scientific.net/SSP.95-96.433.CrossRef

[29]

Ossipyan YA, Morgunov RB, Baskakov AA, Orlov AM, Skvortsov AA, Inkina EN, Tanimoto Y. Magnetoresonant hardening of silicon single crystals. JETP Lett. 2004;79(3):126. https://doi.org/10.1134/1.1719128.CrossRef

[30]

Zhang X, Zhao Q, Wang ZY, Cai ZP, Pan JL. A study on the room-temperature magnetoplastic effect of silicon and its mechanism. J Phys Condens Matter. 2021;33(43):435702. https://doi.org/10.1088/1361-648X/ac1823.CrossRef

[31]

Qian CK, Li KJ, Rui SS, Hou MD, Zhang X, Wu Y, Cai ZP. Magnetic induced re-dissolution and microstructure modifications on mechanical properties of Cr₄Mo₄V steel subjected to pulsed magnetic treatment. J Alloys Compd. 2021;881:160471. https://doi.org/10.1016/j.jallcom.2021.160471.CrossRef

[32]

Alshits VI, Darinskaya EV, Koldaeva MV, Petrzhik EA. Electric amplification of the magnetoplastic effect in nonmagnetic crystals. J Appl Phys. 2009;105(6):063520. https://doi.org/10.1063/1.3094007.CrossRef

[33]

Zhang X, Zhao Q, Cai ZP, Pan JL. Effects of magnetic field on the residual stress and structural defects of Ti-6Al-4V. Metals. 2020;10(1):141. https://doi.org/10.3390/met10010141.CrossRef

[34]

Qian CK, Liu Q, Xiong XY, Ye BJ, Li ZY, Li KJ, Ying SJ, Zhang HJ, Huang DM, Zhang X, Cai ZP. Mechanism for magnetic field induced structural relaxation and accompanying fracture toughness improvement of the thermal spraying coating. Mater Des. 2022;223:111113. https://doi.org/10.1016/j.matdes.2022.111113.CrossRef

[35]

Fatemi A, Yang L. Cumulative fatigue damage and life prediction theories: a survey of the state of the art for homogeneous materials. Int J Fatigue. 1998;20(1):9. https://doi.org/10.1016/S0142-1123(97)00081-9.CrossRef

[36]

Watanabe M, Owada A, Kuroda S, Gotoh Y. Effect of WC size on interface fracture toughness of WC-Co HVOF sprayed coatings. Surf Coat Technol. 2006;201(3):619. https://doi.org/10.1016/j.surfcoat.2005.12.019.CrossRef

[37]

Bull SJ. Failure mode maps in the thin film scratch adhesion test. Tribol Int. 1997;30(7):491. https://doi.org/10.1016/S0301-679X(97)00012-1.CrossRef

[38]

Ghabchi A, Sampath S, Holmberg K, Varis T. Damage mechanisms and cracking behavior of thermal sprayed WC–CoCr coating under scratch testing. Wear. 2014;313(1):97. https://doi.org/10.1016/j.wear.2014.02.017.CrossRef

[39]

Vencl A, Arostegui S, Favaro G, Zivic F, Mrdak M, Mitrović S, Popovic V. Evaluation of adhesion/cohesion bond strength of the thick plasma spray coatings by scratch testing on coatings cross-sections. Tribol Int. 2011;44(11):1281. https://doi.org/10.1016/j.triboint.2011.04.002.CrossRef

[40]

Bull SJ, Berasetegui EG. An overview of the potential of quantitative coating adhesion measurement by scratch testing. Tribol Int. 2006;39(2):99. https://doi.org/10.1016/j.triboint.2005.04.013.CrossRef

[41]

Han XY, Sun Y, Liu XL, Wu ZZ, Zhang L, Wang DZ. Influence of thermal shock behavior on microstructure and interface bonding strength of WC/W coating. Surf Coat Technol. 2020;393:125787. https://doi.org/10.1016/j.surfcoat.2020.125787.CrossRef

[42]

Lopez E, Beltzung F, Zambelli G. Measurement of cohesion and adhesion strengths in alumina coatings produced by plasma spraying. J Mater Sci Lett. 1989;8(3):346. https://doi.org/10.1007/BF00725519.CrossRef

[43]

Li YH, Yang C, Kang LM, Zhao HD, Qu SG, Li XQ, Zhang WW, Li YY. Non-isothermal and isothermal crystallization kinetics and their effect on microstructure of sintered and crystallized TiNbZrTaSi bulk alloys. J Non-Cryst Solids. 2016;432:440. https://doi.org/10.1016/j.jnoncrysol.2015.11.005.CrossRef

[44]

Paul T, Loganathan A, Agarwal A, Harimkar SP. Kinetics of isochronal crystallization in a Fe-based amorphous alloy. J Alloys Compd. 2018;753:679. https://doi.org/10.1016/j.jallcom.2018.04.133.CrossRef

[45]

Ahmed R, Yu H, Stoica V, Edwards L, Santisteban JR. Neutron diffraction residual strain measurements in post-treated thermal spray cermet coatings. Mater Sci Eng A. 2008;498(1):191. https://doi.org/10.1016/j.msea.2008.08.023.CrossRef

[46]

Oladijo OP, Venter AM, Cornish LA. Correlation between residual stress and abrasive wear of WC-17Co coatings. Int J Refract Metal Hard Mater. 2014;44:68. https://doi.org/10.1016/j.ijrmhm.2014.01.009.CrossRef

[47]

Oladijo OP, Venter AM, Cornish LA, Sacks N. X-ray diffraction measurement of residual stress in WC-Co thermally sprayed coatings onto metal substrates. Surf Coat Technol. 2012;206(23):4725. https://doi.org/10.1016/j.surfcoat.2012.01.044.CrossRef

[48]

Xiang C, Shen M, Hu C, Wong LW, Nie H, Lei H, Luo J, Zhao J, Yu Z. Atomistic observation of in situ fractured surfaces at a V-doped WCCo interface. J Mater Sci Technol. 2022;110:103. https://doi.org/10.1016/j.jmst.2021.09.021.CrossRef

[49]

Li J, Li X, Cao T, Pan C, Qiu H, Zhang Y. The Sigma = 2 and Sigma = 13a grain boundary distributions in cemented tungsten carbides with/without metallic binders. Mater Charact. 2021;173:110872. https://doi.org/10.1016/j.matchar.2021.110872.CrossRef

[50]

Pellan M, Lay S, Missiaen J-M, Norgren S, Angseryd J, Coronel E, Persson T. A new insight into the Sigma = 2 grain boundary characteristics in WC powder and in WC–Co sintered materials. Acta Mater. 2018;155:372. https://doi.org/10.1016/j.actamat.2018.06.022.CrossRef

[51]

Petisme MVG, Gren MA, Wahnström G. Molecular dynamics simulation of WC/WC grain boundary sliding resistance in WC–Co cemented carbides at high temperature. Int J Refract Metal Hard Mater. 2015;49:75. https://doi.org/10.1016/j.ijrmhm.2014.07.037.CrossRef

[52]

Wang D, Zhang B, Jia C, Gao F, Yu Y, Chu K, Zhang M, Zhao X. Influence of carbide grain size and crystal characteristics on the microstructure and mechanical properties of HVOF-sprayed WC-CoCr coatings. Int J Refract Metal Hard Mater. 2017;69:138. https://doi.org/10.1016/j.ijrmhm.2017.08.008.CrossRef

[53]

Verdon C, Karimi A, Martin JL. A study of high velocity oxy-fuel thermally sprayed tungsten carbide based coatings. Part 1: microstructures. Mater Sci Eng A. 1998;246(1):11. https://doi.org/10.1016/S0921-5093(97)00759-4.CrossRef

[54]

Dong N, Zhang C, Liu H, Fan G, Fang X, Han P. Effects of different alloying additives X (X = Si, Al, V, Ti, Mo, W, Nb, Y) on the adhesive behavior of Fe/Cr₂O₃ interfaces: a first-principles study. Comput Mater Sci. 2015;109:293. https://doi.org/10.1016/j.commatsci.2015.07.031.CrossRef

[55]

Abdoos M, Bose B, Rawal S, Arif AFM, Veldhuis SC. The influence of residual stress on the properties and performance of thick TiAlN multilayer coating during dry turning of compacted graphite iron. Wear. 2020;454–455:203342. https://doi.org/10.1016/j.wear.2020.203342.CrossRef

[56]

Fu H, He Y, Yang J, Fu Y, Yin B, Zhang Y, Ji J, Gu Z, Zhou Y. Enhancing adhesion strength of PVD AlCrN coating by novel volcano-shaped micro-textures: experimental study and mechanism insight. Surf Coat Technol. 2022;445:128712. https://doi.org/10.1016/j.surfcoat.2022.128712.CrossRef

[57]

Selvadurai U, Hollingsworth P, Baumann I, Hussong B, Tillmann W, Rausch S, Biermann D. Influence of the handling parameters on residual stresses of HVOF-sprayed WC-12Co coatings. Surf Coat Technol. 2015;268:30. https://doi.org/10.1016/j.surfcoat.2014.11.055.CrossRef

[58]

Wang JS, Evans AG. Measurement and analysis of buckling and buckle propagation in compressed oxide layers on superalloy substrates. Acta Mater. 1998;46(14):4993. https://doi.org/10.1016/S1359-6454(98)00172-4.CrossRef

[59]

Teixeira V. Residual stress and cracking in thin PVD coatings. Vacuum. 2002;64(3):393. https://doi.org/10.1016/S0042-207X(01)00327-X.CrossRef

[60]

Holmberg K, Laukkanen A, Ghabchi A, Rombouts M, Turunen E, Waudby R, Suhonen T, Valtonen K, Sarlin E. Computational modelling based wear resistance analysis of thick composite coatings. Tribol Int. 2014;72:13. https://doi.org/10.1016/j.triboint.2013.12.001.CrossRef

[61]

Parsazadeh M, Fisher G, McDonald A, Hogan J. Computational investigation of the effect of microstructure on the scratch resistance of tungsten-carbide nickel composite coatings. Wear. 2021;478–479:203888. https://doi.org/10.1016/j.wear.2021.203888.CrossRef

[62]

Evans AG, Crumley GB, Demaray RE. On the mechanical-behavior of brittle coatings and layers. Oxid Met. 1983;20(5–6):193. https://doi.org/10.1007/BF00656841.CrossRef

[63]

Coats DL, Krawitz AD. Effect of particle size on thermal residual stress in WC–Co composites. Mater Sci Eng A. 2003;359(1):338. https://doi.org/10.1016/S0921-5093(03)00379-4.CrossRef

[64]

Han L, Ke H, Zhang P, Sang G, Huang H. Kinetic crystallization behavior of amorphous U₆₀Fe_27.5Al_12.5 alloy. Acta Mater Sin. 2022;58(10):1316. https://doi.org/10.11900/0412.1961.2021.00077.CrossRef

Titel: Interface strengthening for thermal sprayed WC-10Co4Cr coating subjected to pulsed magnetic treatment
verfasst von: Cheng-Kai Qian
Qu Liu
Heng Wang
Ke-Jian Li
Zhi-Peng Cai
Publikationsdatum: 20.11.2023
Verlag: Nonferrous Metals Society of China
Erschienen in: Rare Metals / Ausgabe 2/2024
Print ISSN: 1001-0521
Elektronische ISSN: 1867-7185
DOI: https://doi.org/10.1007/s12598-023-02457-z

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Graphical abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2024

Functional decoration on a regenerable bifunctional porous covalent organic framework probe for rapid detection and adsorption of copper ions

Stepwise colloidal lithography toward scalable and various planar chiral metamaterials

Creep property and microstructural evolution of DD11 alloy under high temperature and low stress

Interface engineering of Co9S8/SnS heterostructure as a high-performance anode for lithium/sodium-ion batteries

NaBH4-induced phase transition of CoSe2 with abundant Se deficiency for acidic oxygen reduction to hydrogen peroxide

A novel Ce0.485Zr0.485Y0.03O2 composite oxide with surface doping of Y and its application in Pd-only three-way catalyst

Premium Partner

Marktübersichten