nach oben

Erschienen in:

2007 | OriginalPaper | Buchkapitel

7. Introduction to Micro/Nanofabrication

verfasst von : Babak Ziaie, Prof., Antonio Baldi, Prof., Massood Atashbar, Prof.

Erschienen in: Springer Handbook of Nanotechnology

Verlag: Springer Berlin Heidelberg

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This chapter outlines and discusses important micro- and nanofabrication techniques. We start with the most basic methods borrowed from the integrated circuit (IC) industry, such as thin film deposition, lithography and etching, and then move on to look at MEMS and nanofabrication technologies. We cover a broad range of dimensions, from the micron to the nanometer scale. Although most of the current research is geared towards the nanodomain, a good understanding of top-down methods for fabricating micron-sized objects can aid our understanding of this research. Due to space constraints, we have focused here on the most important technologies; in the microdomain these include surface, bulk and high aspect ratio micromachining; in the nanodomain we concentrate on e-beam lithography, epitaxial growth, template manufacturing and self-assembly. MEMS technology is maturing rapidly, with some new technologies displacing older ones that have proven to be unsuited to manufacture on a commercial scale. However, the jury is still out on methods used in the nanodomain, although it appears that bottom-up methods are the most feasible, and these will have a major impact in a variety of application areas such as biology, medicine, environmental monitoring and nanoelectronics.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Three-Dimensional Nanostructure Fabrication by Focused Ion Beam Chemical Vapor Deposition

Nächstes Kapitel Nanoimprint Lithography

7.1.

S. A. Campbell: The Science and Engineering of Microelectronic Fabrication (Oxford Univ. Press, New York 2001)

7.2.

C. J. Jaeger: Introduction to Microelectronic Fabrication (Prentice Hall, New Jersey 2002)

7.3.

J. D. Plummer, M. D. Deal, P. B. Griffin: Silicon VLSI Technology (Prentice-Hall, New Jersey 2000)

7.4.

J. E. Bjorkholm: EUV lithography: the successor to optical lithography, Intel Technol. J. 2, 1–8 (1998)

7.5.

H. U. Krebs, M. Störmer, J. Faupel, E. Süske, T. Scharf, C. Fuhse, N. Seibt, H. Kijewski, D. Nelke, E. Panchenko, M. Buback: Pulsed laser deposition (PLD) – a versatile thin film technique, Adv. Solid State Phys. 43, 505–517 (2003)

7.6.

M. Leskela, M. Ritala: Atomic layer deposition chemistry: recent developments and future challenges, Angew. Chem. Int. Ed. 42, 5548–5554 (2003)

7.7.

J. L. Vossen: Thin Film Processes (Academic, New York 1976)

7.8.

M. Gad-el-Hak: The MEMS Handbook (CRC, Boca Raton 2002)

7.9.

T-R. Hsu: MEMS and Microsystems Design and Manufacture (McGraw-Hill, New York 2002)

7.10.

G. T. A. Kovacs: Micromachined Transducers Sourcebook (McGraw-Hill, New York 1998)

7.11.

P. Rai-Choudhury: Handbook of Microlithography, Micromachining and Microfabrication. Volume 2: Micromachining and Microfabrication (SPIE, IEE, Bellingham 1997)

7.12.

T. J. Cotler, M. E. Elta: Plasma-etch technology, IEEE Circuits Devices Mag. 6, 38–43 (1990)

7.13.

U. Gosele, Q. Y. Tong: Semiconductor wafer bonding, Annu. Rev. Mater. Sci 28, 215–241 (1998)

7.14.

Q. Y. Tong, U. Gosele: Semiconductor Wafer Bonding: Science and Technology (Wiley, New York 1999)

7.15.

F. Niklaus, P. Enoksson, E. Kalveston, G. Stemme: Void-free full-wafer adhesive bonding, J. Micromech. Microeng. 11, 100–107 (2000)

7.16.

C. A. Harper: Electronic Packaging and Interconnection Handbook (McGraw-Hill, New York 2000)

7.17.

W. H. Ko, J. T. Suminto, G. J. Yeh: Bonding techniques for microsensors. In: Micromachining and Micropackaging for Transducers, ed. by W. H. Ko (Elsevier, Amsterdam 1985)

7.18.

G. T. A. Kovacs, N. I. Maluf, K. A. Petersen: Bulk micromachining of silicon, Proc. IEEE 86, 1536–1551 (1998)

7.19.

K. Najafi, K. D. Wise, T. Mochizuki: A high-yield IC-compatible multichannel recording array, IEEE Trans. Electron Devices 32, 1206–1211 (1985)

7.20.

A. Selvakumar, K. Najafi: A high-sensitivity z-axis capacitive silicon microaccelerometer with a tortional suspension, J. Microelectromech. Sys. 7, 192–200 (1998)

7.21.

H. Baltes, O. Paul, O. Brand: Micromachined thermally based CMOS microsensors, Proc. IEEE 86, 1660–1678 (1998)

7.22.

B. Eyre, K. S. J. Pister, W. Gekelman: Multi-axis microcoil sensors in standard CMOS, Proc. SPIE Conf. Micromachined Devices and Components, Austin, TX, 183–191 (1995)

7.23.

K. A. Shaw, Z. L. Zhang, N. C. MacDonald: SCREAM: a single mask, single-crystal silicon process for microelectromechanical structures, Proc. IEEE Workshop Microelectromechanical Systems, Fort Lauderdale, 155–160 (1993)

7.24.

G. K. Fedder, S. Santhanam, M. L. Reed, S. C. Eagle, D. F. Guillo, M. S. C. Lu, L. R. Carley: Laminated high-aspect-ratio microstructures in a conventional CMOS process, Proc. IEEE Workshop Micro Electro Mechanical Systems, San Diego, CA, 13–18 (1996)

7.25.

N. C. MacDonald: SCREAM Microelectromechanical systems, Microelectron. Eng. 32, 51–55 (1996)

7.26.

X. Huikai, L. Erdmann, Z. Xu, K. J. Gabriel, G. K. Fedder: Post-CMOS processing for high-aspect-ratio integrated silicon microstructures, J. Microelectromech. Sys. 11, 93–101 (2002)

7.27.

B. P. Van Drieenhuizen, N. I. Maluf, I. E. Opris, G. T. A. Kovacs: Force-balanced accelerometer with mG resolution fabricated using silicon fusion bonding and deep reactive ion etching, Proc. Int. Conf. Solid-State Sensors and Actuators, Chicago, 1229–1230 (1997)

7.28.

J. M. Bustillo, R. S. Muller: Surface micromachining for microelectromechanical systems, Proc. IEEE 86, 1552–1574 (1998)

7.29.

H. C. Nathanson, W. E. Newell, R. A. Wickstrom, J. R. Davis: The resonant gate transistor, IEEE Trans. Electron Devices 14, 117–133 (1967)

7.30.

R. T. Howe, R. S. Muller: Polycrystalline silicon micromechanical beams, Proc. Electrochemical Soc., Spring Meeting, Montreal, 184–185 (1982)

7.31.

J. A. Geen, S. J. Sherman, J. F. Chang, S. R. Lewis: Single-chip surface-micromachined integrated gyroscope with 50 degrees /hour root Allan variance, IEEE J. Solid-St. Circ. 37, 1860–1866 (2002)

7.32.

P. F. Van Kessel, L. J. Hornbeck, R. E. Meier, M. R. Douglass: A MEMS-based projection display, Proc. IEEE 86, 1687–1704 (1998)

7.33.

A. E. Franke, D. Bilic, D. T. Chang, P. T. Jones, R. T. Howe, G. C. Johnson: Post-CMOS integration of germanium microstructures, Proc. Micro Electro Mechanical Systems, Orlando, FL, 630–637 (1999)

7.34.

S. Sedky, P. Fiorini, M. Caymax, S. Loreti, K. Baert, L. Hermans, R. Mertens: Structural and mechanical properties of polycrystalline silicon germanium for micromachining applications, J. Microelectromech. Sys. 7, 365–372 (1998)

7.35.

N. Tas, T. Sonnenberg, H. Jansen, R. Legtenberg, M. Elwenspoek: Stiction in surface micromachining, J. Micromech. Microeng. 6, 385–397 (1996)

7.36.

R. Maboudian, R. T. Howe: Critical review: adhesion in surface micromechanical structures, J. Vacuum Sci. Tech. B 15, 1–20 (1997)

7.37.

J. H. Smith, S. Montague, J. J. Sniegowski, J. R. Murray, P. J. McWhorter: Embedded micromechanical devices for the monolithic integration of MEMS with CMOS, Proc. Int. Electron Devices Meeting, Washington, 609–612 (1995)

7.38.

R. S. Muller, K. Y. Lau: Surface-micromachined microoptical elements and systems, Proc. IEEE 86, 1705–1720 (1998)

7.39.

K. S. J. Pister, M. W. Judy, S. R. Burgett, R. S. Fearing: Microfabricated hinges: 1 mm vertical features with surface micromachining, Proc. 6 Int. Conf. Solid-State Sensors and Actuators, San Francisco, 647–650 (1991)

7.40.

L. Y. Lin, S. S. Lee, M. C. Wu, K. S. J. Pister: Micromachined integrated optics for free space interconnection, Proc. IEEE Micro-Electromechanical Systems Workshop, Amsterdam, 77–82 (1995)

7.41.

E. W. Becker, W. Ehrfeld, P. Hagmann, A. Maner, D. Munchmeyer: Fabrication of microstructures with high aspect ratios and great structural heights by synchrotron radiation lithography galvanoforming, and plastic molding (LIGA process), Microelectron. Eng. 4, 35–56 (1986)

7.42.

H. Guckel Guckel: High-aspect-ratio micromachining via deep X-ray lithography, Proc. IEEE 86, 1586–1593 (1998)

7.43.

K. Y. Lee, N. LaBianca, S. A. Rishton, S. Zolgharnain, J. D. Gelorme, J. Shaw, T. H. P. Chang: Micromachining applications of a high resolution ultra-thick photoresist, J. Vacuum Sci. Tech. B 13, 3012–3016 (1995)

7.44.

K. Roberts, F. Williamson, G. Cibuzar, L. Thomas: The fabrication of an array of microcavities utilizing SU-8 photoresist as an alternative 'LIGA' technology, Proc. 13th Biennial University/Government/Industry Microelectronics Symp. (IEEE), Minneapolis, 139–141 (1999)

7.45.

D. A. Horsley, M. B. Cohn, A. Singh, R. Horowitz, A. P. Pisano: Design and fabrication of a angular microactuator for magnetic disk drives, J. Microelectromech. Sys. 7, 141–148 (1998)

7.46.

C. Burbaum, J. Mohr, P. Bley, W. Ehrfeld: Fabrication of capacitive acceleration sensors by the LIGA technique, Sensor. Actuat. A A27, 559–563 (1991)

7.47.

C. G. Keller, R. T. Howe: Hexsil bimorphs for vertical actuation. In: Digest of Technical Papers, 8th Int. Conf. on Solid-State Sensors and Actuators and Eurosensors IX (IEEE, Stockholm 1995) pp. 99–102

7.48.

C. G. Keller, R. T. Howe: Nickel-filled hexsil thermally actuated tweezers. In: Digest of Technical Papers, 8th Int. Conf. on Solid-State Sensors and Actuators and Eurosensors IX (IEEE, Stockholm 1995) pp. 376–379

7.49.

N. Yazdi, F. Ayazi: Micromachined inertial sensor, Proc. IEEE 86, 1640–1659 (1998)

7.50.

F. Ayazi, K. Najafi: High aspect-ratio combined poly and single-crystal silicon (HARPSS) MEMS technology, J. Microelectromech. Sys. 9, 288–294 (2000)

7.51.

F. Ayazi, K. Najafi: A HARPSS polysilicon vibrating ring gyroscope, J. Microelectromech. Sys. 10, 169–179 (2001)

7.52.

Y. S. No, F. Ayazi: The HARPSS process for fabrication of nano-precision silicon electromechanical resonators, Proc. 1st IEEE Conf. on Nanotechnology, Maui, 489–494 (2001)

7.53.

G. Timp: Nanotechnology (Springer, Berlin Heidelberg 1998)

7.54.

P. Rai-Choudhury: Handbook of Microlithography, Micromachining and Microfabrication. Volume 1: Microlithography (SPIE, IEE, Bellingham 1997)

7.55.

L. Ming, C. Bao-qin, Y. Tian-Chun, Q. He, X. Qiuxia: The sub-micron fabrication technology, Proc. 6th Int. Conf. on Solid-State and Integrated-Circuit Technology, San Francisco, 452–455 (2001)

7.56.

S. Y. Chou: Nano-imprint lithography and lithographically induced self-assembly, MRS Bull. 26, 512–517 (2001)

7.57.

S. Y. Chou, C. Keimel, J. Gu: Ultrafast and direct imprint of nanostructures in silicon, Nature 417, 835–837 (2002)

7.58.

H. Cao, Z. Yu, J. Wang, J. O. Tegenfeldt, R. H. Austin, E. Chen, W. Wu, S. Y. Chou: Fabrication of 10 nm enclosed nanofluidic channels, Appl. Phys. Lett. 81, 174–176 (2002)

7.59.

L. R. Bao, X. Cheng, X. D. Huang, L. J. Guo, S. W. Pang, A. F. Yee: Nanoimprinting over topography and multilayer three-dimensional printing, J. Vacuum. Sci. Tech. B 20, 2881–2886 (2002)

7.60.

L. J. Guo: Recent progress in nanoimprint technology and its applications, J. Phys. D 137, R123–R141 (2004)

7.61.

M. A. Herman: Molecular Beam Epitaxy: Fundamentals and Current Status (Springer, Berlin Heidelberg 1996)

7.62.

J. S. Frood, G. J. Davis, W. T. Tsang: Chemical Beam Epitaxy and Related Techniques (Wiley, New York 1997)

7.63.

S. Mahajan, K. S. Sree Harsha: Principles of Growth and Processing of Semiconductors (McGraw-Hill, New York 1999)

7.64.

S. Kim, M. Razegi: Advances in quantum dot structures. In: Processing and Properties of Compound Semiconductors, ed. by Willardson, Navawa (Academic, New York 2001)

7.65.

D. Bimberg, M. Grundmann, N. N. Ledentsov: Quantum Dot Heterostructures (Wiley, New York 1999)

7.66.

G. Seebohm, H. G. Craighead: Lithography and patterning for nanostructure fabrication. In: Quantum Semiconductor Devices and Technologies, ed. by T. P. Pearsall (Kluwer, Boston 2000)

7.67.

E. Kapon: Lateral patterning of quantum well heterostructures by growth on nonplanar substrates. In: Epitaxial Microstructures, ed. by A. C. Gossard (Academic, New York 1994)

7.68.

F. Guffarth, R. Heitz, A. Schliwa, O. Stier, N. N. Ledentsov, A. R. Kovsh, V. M. Ustinov, D. Bimberg: Strain engineering of self-organized InAs quantum dots, Phys. Rev. B 64, 085305(1)–085305(7) (2001)

7.69.

M. Sugawara: Self-Assembled InGaAs/GaAs Quantum Dots (Academic, New York 1999)

7.70.

B. C. Lee, S. D. Lin, C. P. Lee, H. M. Lee, J. C. Wu, K. W. Sun: Selective growth of single InAs quantum dots using strain engineering, Appl. Phys. Lett. 80, 326–328 (2002)

7.71.

K. Brunner: Si/Ge nanostructures, Rep. Prog. Phys 65, 27–72 (2002)

7.72.

F. S. S. Chien, W. F. Hsieh, S. Gwo, A. E. Vladar, J. A. Dagata: Silicon nanostructures fabricated by scanning probe oxidation and tetra-methyl ammonium hydroxide etching, J. Appl. Phys. 91, 10044–10050 (2002)

7.73.

M. Calleja, J. Anguita, R. Garcia, K. Birkelund, F. Perez-Murano, J. A. Dagata: Nanometer-scale oxidation of silicon surfaces by dynamic force microscopy: reproducibility, kinetics, nanofabrication, Nanotechnology 10, 34–38 (1999)

7.74.

E. S. Snow, P. M. Campbell, F. K. Perkins: Nanofabrication with proximal probes, Proc. IEEE 85, 601–611 (1997)

7.75.

H. Sugimura, T. Uchida, N. Kitamura, H. Masuhara: Tip-induced anodization of titanium surfaces by scanning tunneling microscopy: a humidity effect on nanolithography, Appl. Phys. Lett. 63, 1288–1290 (1993)

7.76.

N. Kramer, J. Jorritsma, H. Birk, C. Schonenberger: Nanometer lithography on silicon and hydrogenated amorphous silicon with low energy electrons, J. Vacuum Sci. Tech. B 13, 805–811 (1995)

7.77.

H. T. Soh, K. W. Guarini, C. F. Quate: Scanning Probe Lithography (Kluwer, Boston 2001)

7.78.

C. A. Mirkin: Dip-pen nanolithography: automated fabrication of custom multicomponent, sub-100-nanometer surface architectures, MRS Bull. 26, 535–538 (2001)

7.79.

P. E. Sheehan, L. J. Whitman, W. P. King, B. A. Nelson: Nanoscale deposition of solid inks via thermal dip pen nanolithography, Appl. Phys. Lett. 85, 1589–1591 (2004)

7.80.

L. L. Sohn, R. L. Willett: Fabrication of nanostructures using atomic force microscope-based lithography, Appl. Phys. Lett. 67, 1552–1554 (1995)

7.81.

H. J. Mamin, B. D. Terris, L. S. Fan, S. Hoen, R. C. Barrett, D. Rugar: High-density data storage using proximal probe techniques, IBM J. Res. Dev. 39, 681–699 (1995)

7.82.

K. Bessho, S. Hashimoto: Fabricating nanoscale structures on Au surface with scanning tunneling microscope, Appl. Phys. Lett. 65, 2142–2144 (1994)

7.83.

I. W. Lyo, P. Avouris: Field-induced nanometer- to atomic-scale manipulation of silicon surfaces with the STM, Science -253, 173–176 (1991)

7.84.

M. F. Crommie, C. P. Lutz, D. M. Eigler: Confinement of electrons to quantum corrals on a metal surface, Science 262, 218–220 (1993)

7.85.

A. de Lozanne: Pattern generation below 0.1 micron by localized chemical vapor deposition with the scanning tunneling microscope, Jpn. J. Appl. Phys. 33, 7090–7093 (1994)

7.86.

L. A. Nagahara, T. Thundat, S. M. Lindsay: Nanolithography on semiconductor surfaces under an etching solution, Appl. Phys. Lett. 57, 270–272 (1990)

7.87.

T. Thundat, L. A. Nagahara, S. M. Lindsay: Scanning tunneling microscopy studies of semiconductor electrochemistry, J. Vacuum Sci. Tech. A 8, 539–543 (1990)

7.88.

S. C. Minne, S. R. Manalis, A. Atalar, C. F. Quate: Independent parallel lithography using the atomic force microscope, J. Vacuum Sci. Tech. B 14, 2456–2461 (1996)

7.89.

M. Lutwyche, C. Andreoli, G. Binnig, J. Brugger, U. Drechsler, W. Haeberle, H. Rohrer, H. Rothuizen, P. Vettiger: Microfabrication and parallel operation of 5*5 2D AFM cantilever arrays for data storage and imaging, Proc. MEMS, 8–11 (1998)

7.90.

G. M. Whitesides, B. Grzybowski: Self-assembly at all scales, Science 295, 2418–2421 (2002)

7.91.

P. Kazmaier, N. Chopra: Bridging size scales with self-assembling supramolecular materials, MRS Bull. 25, 30–35 (2000)

7.92.

R. Plass, J. A. Last, N. C. Bartelt, G. L. Kellogg: Self-assembled domain patterns, Nature 412, 875 (2001)

7.93.

Y. A. Vlasov, X-Z. Bo, J. G. Sturm, D. J. Norris: On-chip natural self-assembly of silicon photonic bandgap crystals, Nature 414, 289–293 (2001)

7.94.

C. Gigault, K. Dalnoki-Veress, J. R. Dutcher: Changes in the morphology of self-assembled polystyrene microsphere monolayers produced by annealing, J. Colloid Interf. Sci. 243, 143–155 (2001)

7.95.

J. C. Hulteen, P. Van Duyne: Nanosphere lithography: a materials general fabrication process for periodic particle array surfaces, J. Vacuum Sci. Tech. A 13, 1553–1558 (1995)

7.96.

J. D. Joannopoulos, P. R. Villeneuve, S. Fan: Photonic crystals: putting a new twist on light, Nature 386, 143–149 (1997)

7.97.

T. D. Clark, R. Ferrigno, J. Tien, K. E. Paul, G. M. Whitesides: Template-directed self-assembly of 10-μm-sized hexagonal plates, J. Am. Chem. Soc. 124, 5419–5426 (2002)

7.98.

S. A. Sapp, D. T. Mitchell, C. R. Martin: Using template-synthesized micro- and nanowires as building blocks for self-assembly of supramolecular architectures, Chem. Mater. 11, 1183–1185 (1999)

7.99.

Y. Yin, Y. Lu, B. Gates, Y. Xia: Template assisted self-assembly: a practical route to complex aggregates of monodispersed colloids with well-defined sizes, shapes and structures, J. Am. Chem. Soc. 123, 8718–8729 (2001)

7.100.

J. L. Wilbur, G. M. Whitesides: Self-assembly and self-assembled monolayers in micro and nanofabrication. In: Nanotechnology, ed. by G. Timp (Springer, Berlin Heidelberg 1999)

7.101.

S. R. Wasserman, Y. T. Tao, G. M. Whitesides: Structure and reactivity of alkylsiloxane monolayers formed by reaction of alkyltrichlorosilanes on silicon substrates, Langmuir 5, 1074–1087 (1989)

7.102.

C. P. Tripp, M. L. Hair: An infrared study of the reaction of octadecyltrichlorosilane with silica, Langmuir 8, 1120–1126 (1992)

7.103.

D. R. Walt: Nanomaterials: top-to-bottom functional design, Nature 1, 17–18 (2002)

7.104.

J. Noh, T. Murase, K. Nakajima, H. Lee, M. Hara: Nanoscopic investigation of the self-assembly processes of dialkyl disulfides and dialkyl sulfides on Au(111), J. Phys. Chem. B 104, 7411–7416 (2000)

7.105.

M. Himmelhaus, F. Eisert, M. Buck, M. Grunze: Self-assembly of n-alkanethiol monolayers: a study by IR-visible sum frequency spectroscopy (SFG), J. Phys. Chem. 104, 576–584 (1999)

7.106.

A. K. Boal, F. Ilhan, J. E. DeRouchey, T. Thurn-Albrecht, T. P. Russell, V. M. Rotello: Self-assembly of nanoparticles into structures spherical and network aggregates, Nature 404, 746–748 (2000)

7.107.

A. Ulman: An Introduction to Ultrathin Organic Films: From Langmuir-Blodgett to Self-Assembly (Academic, New York 1991)

7.108.

E. Winfree, F. Liu, L. A. Wenzler, N. C. Seeman: Design and self-assembly of two-dimensional DNA crystals, Nature 394, 539–544 (1998)

7.109.

J. H. Reif, T. H. LaBean, N. C. Seeman: Programmable assembly at the molecular scale: self-assembly of DNA lattices, Proc. 2001 IEEE Int. Conf. Robotics and Automation, Seoul, 966–971 (2001)

7.110.

A. P. Alivisatos, K. P. Johnsson, X. Peng, T. E. Wilson, C. J. Loweth, M. P. Bruchez Jr, P. G. Schultz: Organization of nanocrystal molecules using DNA, Nature 382, 609–611 (1996)

7.111.

C. Y. Cao, R. Jin, C. A. Mirkin: Nanoparticles with Raman spectroscopic fingerprints for DNA and RNA detection, Science 297, 1536–1540 (2002)

7.112.

H. Masuda, H. Yamada, M. Satoh, H. Asoh: Highly ordered nanochannel-array architecture in anodic alumina, Appl. Phys. Lett. 71, 2770–2772 (1997)

7.113.

R. L. Fleischer: Nuclear Tracks in Solids: Principles and Applications (Univ. California Press, Berkeley 1976)

7.114.

R. E. Packard, J. P. Pekola, P. B. Price, R. N. R. Spohr, K. H. Westmacott, Y. Q. Zhu: Manufacture observation and test of membranes with locatable single pores, Rev. Sci. Instrum. 57, 1654–1660 (1986)

7.115.

L. Sun, P. C. Searson, C. L. Chien: Electrochemical deposition of nickel nanowire arrays in single-crystal mica films, Appl. Phys. Lett. 74, 2803–2805 (1999)

7.116.

Y. Du, W. L. Cai, C. M. Mo, J. Chen, L. D. Zhang, X. G. Zhu: Preparation and photoluminescence of alumina membranes with ordered pore arrays, Appl. Phys. Lett. 74, 2951–2953 (1999)

7.117.

M. Guowen, C. Anyuan, C. Ju-Yin, A. Vijayaraghavan, J. J. Yung, M. Shima, P. M. Ajayan: Ordered Ni nanowire tip arrays sticking out of the anodic aluminum oxide template, J. Appl. Phys. 97, 64303 (2005)

7.118.

S. Yang, H. Zhu, D. Yu, Z. Jin, S. Tang, Y. Du: Preparation and magnetic property of Fe nanowire array, J. Magn. Magn. Mater. 222, 97–100 (2000)

7.119.

M. Sun, G. Zangari, R. M. Metzger: Cobalt island arrays with in-plane anisotropy electrodeposited in highly ordered alumina, IEEE Trans. Magnetics 36, 3005–3008 (2000)

7.120.

P. V. Braun, P. Wiltzius: Electrochemically grown photonic crystals, Nature 402, 603–604 (1999)

7.121.

S. R. Nicewarner-Pena, R. G. Freeman, B. D. Reiss, L. He, D. J. Pena, I. D. Walton, R. Cromer, C. D. Keating, M. J. Natan: Submicrometer metallic barcodes, Science 294, 137–141 (2001)

7.122.

D. Almalawi, C. Z. Ziu, M. Moskovits: Nanowires formed in anodic oxide nanotemplates, J. Mater. Res. 9, 1014 (1993)

7.123.

J. C. Hulteen, C. R. Martin: A general template-based method for the preparation of nanomaterials, J. Mater. Chem. 7, 1075–1087 (1997)

7.124.

B. R. Martin, D. J. Dermody, B. D. Reiss, M. Fang, L. A. Lyon, M. J. Natan, T. E. Mallouk: Orthogonal self-assembly on colloidal gold-platinum nanorods, Adv. Mater. 11, 1021–1025 (1997)

Titel: Introduction to Micro/Nanofabrication
verfasst von: Babak Ziaie, Prof.
Antonio Baldi, Prof.
Massood Atashbar, Prof.
Verlag: Springer Berlin Heidelberg
Buch: Springer Handbook of Nanotechnology
Print ISBN: 978-3-540-29855-7

Electronic ISBN: 978-3-540-29857-1

Copyright-Jahr: 2007
DOI: https://doi.org/10.1007/978-3-540-29857-1_7

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht