nach oben

Erschienen in:

2018 | OriginalPaper | Buchkapitel

1. Introduction

verfasst von : Yanrong Zhang

Erschienen in: Study on Microstructure and Rheological Properties of Cement-Chemical Admixtures-Water Dispersion System at Early Stage

Verlag: Springer Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Concrete is regarded as a key material to satisfy the requirements in the global housing and modern infrastructure. Currently, the annual global cement production has reached 4.0 billion tons and the corresponding concrete production is more than 10 billion cubic meters.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nächstes Kapitel Methodology

Aiad I (2003) Influence of time addition of superplasticizers on the rheological properties of fresh cement pastes. Cem Concr Res 33(8):1229–1234CrossRef

Aïtcin PC (2000) Cements of yesterday and today: concrete of tomorrow. Cem Concr Res 30(9):1349–1359CrossRef

Aïtcin PC (2011) High performance concrete. CRC Press, Boca Raton

Allan ML (1997) Rheology of latex-modified grouts. Cem Concr Res 27(12):1875–1884CrossRef

Anagnostopoulos CA, Anagnostopoulos AC (2002) Polymer-cement mortars for repairing ancient masonries mechanical properties. Constr Build Mater 16(7):379–384CrossRef

Arandigoyen M, Alvarez JI (2007) Pore structure and mechanical properties of cement-lime mortars. Cem Concr Res 37(5):767–775CrossRef

Assaad J, Khayat KH, Mesbah H (2003) Assessment of thixotropy of flowable and self-consolidating concrete. ACI Mater J 100(2):99–107

Autier C, Azéma N, Boustingorry P (2014) Using settling behaviour to study mesostructural organization of cement pastes and superplasticizer efficiency. Colloids Surf A 450:36–45CrossRef

Autier C, Azema N, Taulemesse JM et al (2013) Mesostructure evolution of cement pastes with addition of superplasticizers highlighted by dispersion indices. Powder Technol 249:282–289CrossRef

Axelsson M, Gustafson G (2006) A robust method to determine the shear strength of cement-based injection grouts in the field. Tunn Undergr Space Technol 21(5):499–503CrossRef

Banfill PFG (1994) Rheological methods for assessing the flow properties of mortar and related materials. Constr Build Mater 8(1):43–50CrossRef

Banfill PFG (2003) The rheology of fresh cement and concrete—a review. In: Proceedings of 11th international cement chemistry congress, Durban, South Africa, pp 1–13

Banfill PFG (2006) Rheology of fresh cement and concrete. Rheol Rev 2006:61

Banfill PFG, Bowen P, Flatt RJ et al (2007) Improved superplasticisers for high performance concrete: the SUPERPLAST project. In: Abstract CD ROM of the twelfth international congress on the chemistry of cement

Barluenga G, Hernández-Olivares F (2004) SBR latex modified mortar rheology and mechanical behaviour. Cem Concr Res 34(3):527–535CrossRef

Barnes HA (1999) The yield stress—a review or ‘παντα ρει’—everything flows? J Nonnewton Fluid Mech 81(1):133–178MATHCrossRef

Barnes HA, Hutton JF (1989) An introduction to rheology. Elsevier, AmsterdamMATH

Barnes HA, Nguyen QD (2001) Rotating vane rheometry-a review. J Nonnewton Fluid Mech 98(1):1–14MATHCrossRef

Beeldens A, Van Gemert D, Schorn H et al (2005) From microstructure to macrostructure: an integrated model of structure formation in polymer-modified concrete. Mater Struct 38(6):601–607CrossRef

Bellotto M (2013) Cement paste prior to setting: a rheological approach. Cem Concr Res 52:161–168CrossRef

Bian R, Shen J (2006) Review of polycarboxylate superplasticizer: synthetic methods and research. Fine Chem 23(2):179–182

Blair GWS (1966) The success of Casson’s equation. Rheol Acta 5(3):184–187CrossRef

Borget P, Galmiche L, Le Meins JF et al (2005) Microstructural characterisation and behaviour in different salt solutions of sodium polymethacrylate-g-PEO comb copolymers. Colloids Surf A 260(1):173–182CrossRef

Bremmell KE, Jameson GJ, Biggs S (1998) Polyelectrolyte adsorption at the solid/liquid interface: interaction forces and stability. Colloids Surf A 139(2):199–211CrossRef

Brinkman HC (1952) The viscosity of concentrated suspensions and solutions. J Chem Phys 20(4):571CrossRef

Burge TA, Krapf-Huber A, Sulser U et al (1999) Dispersing agent for high-flow or self-compacting concrete: U.S. Patent 5919300

Burgos-Montes O, Palacios M, Rivilla P et al (2012) Compatibility between superplasticizer admixtures and cements with mineral additions. Constr Build Mater 31:300–309CrossRef

Cao EX, Zhang YR, Kong XM (2012) Microstructure model of fresh cement paste with superplasticizer. Concrete 8:37–161 (in Chinese)

Castro A, Bergenståhl B, Tornberg E (2013) Effect of heat treatment and homogenization on the rheological properties of aqueous parsnip suspensions. J Food Eng 117(3):383–392CrossRef

China Cement Information Center. [EB/OL][20140731]. http://www.ccement.com/news/content/7538953450084.html (in Chinese)

Chandra S, Björnström J (2002) Influence of superplasticizer type and dosage on the slump loss of Portland cement mortars—part II. Cem Concr Res 32(10):1613–1619CrossRef

Clayton S, Grice TG, Boger DV (2003) Analysis of the slump test for on-site yield stress measurement of mineral suspensions. Int J Miner Process 70(1):3–21CrossRef

Cook RA, Hover KC (1999) Mercury porosimetry of hardened cement pastes. Cem Concr Res 29(6):933–943CrossRef

Cyr M, Legrand C, Mouret M (2000) Study of the shear thickening effect of superplasticizers on the rheological behaviour of cement pastes containing or not mineral additives. Cem Concr Res 30(9):1477–1483CrossRef

Cyr M, Mouret M (2003) Rheological characterization of superplasticized cement pastes containing mineral admixtures: consequences on self-compacting concrete design. ACI Spec Publ 217:241–256

Czarnecki L, Schorn H (2007) Nanomonitoring of polymer cement concrete microstructure. Restor Build Monum 13(3):141–152

Dai XN (2005) Rheological study on LDHs klaolinite suspensions. Shandong University, Shandong (in Chinese)

Dimmig A (2002) Einflqsse von Polymeren auf die Mikrostruktur und die Dauerhaftigkeit kunststoffmodifizierter Mfrtel (PCC). Ph.D. thesis, Bauhaus-Universit, Weimar

Domone PL, Thurairatnam H (1988) The effect of water/cement ratio, plasticizers and temperature on the rheology of cement grouts. Adv Cem Res 1(4):195–206CrossRef

Einstein A (1956) Investigations on the theory of the Brownian movement. Courier Dover Publications, New YorkMATH

Faroug F, Szwabowski J, Wild S (1999) Influence of superplasticizers on workability of concrete. J Mater Civ Eng 11(2):151–157CrossRef

Felekoğlu B, Türkel S, Baradan B (2007) Effect of water/cement ratio on the fresh and hardened properties of self-compacting concrete. Build Environ 42(4):1795–1802CrossRef

Ferrandis JY, Leveque G (2003) In situ measurement of elastic properties of cement by an ultrasonic resonant sensor. Cem Concr Res 33(8):1183–1187CrossRef

Ferrari G, Cerulli T, Clemente P et al (2000) Influence of carboxylic acid-carboxylic ester ratio of carboxylic acid ester superplasticizer on characteristics of cement mixtures. ACI Spec Publ 195:505–520

Ferraris CF, Gaidis JM (1992) Connection between the rheology of concrete and rheology of cement paste. ACI Mater J 89(4):388–393

Ferraris CF, Obla KH, Hill R (2001) The influence of mineral admixtures on the rheology of cement paste and concrete. Cem Concr Res 31(2):245–255CrossRef

Flatt RJ, Bowen P (2006) Yodel: a yield stress model for suspensions. J Am Ceram Soc 89(4):1244–1256CrossRef

Flatt RJ, Bowen P (2007) Yield stress of multimodal powder suspensions: an extension of the YODEL (Yield Stress YODEL). J Am Ceram Soc 90(4):1038–1044CrossRef

Flatt RJ, Houst YF (2001) A simplified view on chemical effects perturbing the action of superplasticizers. Cem Concr Res 31(8):1169–1176CrossRef

Flatt RJ, Martys N, Bergström L (2004) The rheology of cementitious materials. MRS Bull 29(05):314–318CrossRef

Flatt RJ (2004) Towards a prediction of superplasticized concrete rheology. Mater Struct 37(5):289–300CrossRef

Frankel NA, Acrivos A (1967) On the viscosity of a concentrated suspension of solid spheres. Chem Eng Sci 22(6):847–853CrossRef

Gagn R, Boisvert A, Pigeon M (1996) Effect of superplasticizer dosage on mechanical properties, permeability, and freeze-thaw durability of high-strength concretes with and without silica fume. ACI Mater J 93(2):111–120

Gao JM, Qian CX, Wang B et al (2002) Experimental study on properties of polymer-modified cement mortars with silica fume. Cem Concr Res 32(1):41–45CrossRef

Gao PW, Deng M, Feng NQ (2001) The influence of superplasticizer and superfine mineral powder on the flexibility, strength and durability of HPC. Cem Concr Res 31(5):703–706CrossRef

Giraudeau C, D’Espinose De Lacaillerie JB, Souguir Z et al (2009) Surface and intercalation chemistry of polycarboxylate copolymers in cementitious systems. J Am Ceram Soc 92(11):2471–2488CrossRef

Golaszewski J, Szwabowski J (2004) Influence of superplasticizers on rheological behavior of fresh cement mortars. Cem Concr Res 34(2):235–248CrossRef

Goowin JW (1975) The rheology of dispersion. Colloid Sci 2:246–293CrossRef

Grasley ZC, Lange DA (2007) Constitutive modeling of the aging viscoelastic properties of portland cement paste. Mech Time Depend Mater 11(3–4):175–198CrossRef

Griesser A (2002) Cement-superplasticizer interactions at ambient temperatures. Swiss Federal Institute of Technology, Zürich

Gu P, Xie P, Beaudoin JJ et al (1994) Investigation of the retarding effect of superplasticizers on cement hydration by impedance spectroscopy and other methods. Cem Concr Res 24(3):433–442CrossRef

Gu PY, Pan QM (1994) Study on rheological properties of viscoelastic fluids. J Zhejiang Univ (Eng Sci) 28(1):88–93 (in Chinese)

Håkansson U, Hässler L, Stille H (1992) Rheological properties of microfine cement grouts with additives. In: Grouting, soil improvement and geosynthetics, ASCE, pp 551–563

Han S (2012) The influencing mechanism of gypsum and alkali sulfate on the compatibility of cement with superplasticizers. Tsinghua University, Beijing (in Chinese)

Heywood NI, Cheng DCH (1984) Comparison of methods for predicting head loss in turbulent pipe flow of non-Newtonian fluids. Trans Inst Meas Control 6(1):33–45CrossRef

Houst YF, Bowen P, Perche F (2005) Towards tailored superplasticizers. In: Global construction: ultimate concrete opportunities: proceedings of the international conference, Scotland, UK

Houst YF, Bowen P, Perche F et al (2008) Design and function of novel superplasticizers for more durable high performance concrete (superplastic project). Cem Concr Res 38(10):1197–1209CrossRef

Houst YF, Flatt R J, Bowen P et al (1999) New superplasticizers: from research to application. In: Proceedings of international conference on modern concrete materials: binders, additions and admixtures, London, UK, pp 445–456

Hsu KC, Chiu JJ, Chen SD et al (1999) Effect of addition time of a superplasticizer on cement adsorption and on concrete workability. Cem Concr Compos 21(5):425–430CrossRef

Hu C, de Larrard F (1996) The rheology of fresh high-performance concrete. Cem Concr Res 26(2):283–294CrossRef

Hu SG, Zhang YH, Wang FZ (2012) Effect of temperature and pressure on the degradation of cement asphalt mortar exposed to water. Constr Build Mater 34:570–574CrossRef

Huang DN (1980) Rheology and application science of cement. J Chin Ceram Soc 3:1–10 (in Chinese)

Huang DN, Xie YS (1984) Rheological concepts of fresh concrete. J Chin Ceram Soc 3:35–39 (in Chinese)

Huang Z, Thiagarajan VS, Lyngberg OK et al (1999) Microstructure evolution in polymer latex coatings for whole-cell biocatalyst application. J Colloid Interface Sci 215(2):226–243CrossRef

Jiang TQ (2004) Rheology of chemical engineering. East China University of Science and Technology Press, Shanghai (in Chinese)

Jin RG, Hua YQ (1991) Polymer physics, 1st edn. Chemical Industry Press, Beijing (in Chinese)

Jolicoeur C, Simard MA (1998) Chemical admixture-cement interactions: phenomenology and physico-chemical concepts. Cem Concr Compos 20(2):87–101CrossRef

Kauppi A, Banfill PFG, Bowen P et al (2003) Improved superplasticizers for high performance concrete. In: Proceedings of the 11th international congress on the chemistry of cement, New Delhi, India, 2(LTP-CONF-2003-001), p 8

Kapur PC, Scales PJ, Boger DV et al (1997) Yield stress of suspensions loaded with size distributed particles. AIChE J 43(5):1171–1179CrossRef

Kasami H, Ikeda T, Yamane S (1979) On workability and pumpability of superplasticized concrete-experience in Japan. ACI Spec Publ 62:67–86

Khatib JM, Mangat PS (1999) Influence of superplasticizer and curing on porosity and pore structure of cement paste. Cem Concr Compos 21(5):431–437CrossRef

Kim BG, Jiang S, Jolicoeur C et al (2000) The adsorption behavior of PNS superplasticizer and its relation to fluidity of cement paste. Cem Concr Res 30(6):887–893CrossRef

Knapen E, Van Gemert D (2009) Cement hydration and microstructure formation in the presence of water-soluble polymers. Cem Concr Res 39(1):6–13CrossRef

Kodama K, Okazawa S (1992) Development of a superplasticizer for high strength concrete. Semento Konkurito 546:24–32

Kong XM, Cao EX, Hou SS (2010a) Research progress of polycarboxylate superplasticizer. China Concr 5:28–37 (in Chinese)

Kong XM, Liu YL, Yan PY (2010b) Temperature sensitivity of mechanical properties of cement asphalt mortars. J Chin Ceram Soc 4:553–558 (in Chinese)

Kong XM, Wu CC, Zhang YR et al (2013a) Polymer-modified mortar with a gradient polymer distribution: preparation, permeability, and mechanical behaviour. Constr Build Mater 38:195–203CrossRef

Kong XM, Zhang YR, Hou SS (2013b) Study on the rheological properties of Portland cement pastes with polycarboxylate superplasticizers. Rheol Acta 52(7):707–718CrossRef

Kong XM, Zhang YR, Zhang JY et al (2011) Investigation on flowability and microstructure of fresh cement asphalt binder. J Build Mater 14(4):569–575 (in Chinese)

Krieger IM, Dougherty TJ (1959) A mechanism for non-Newtonian flow in suspensions of rigid spheres. Trans Soc Rheol (1957–1977) 3(1):137–152MATHCrossRef

Krstulović R, Žmikić A, Dabić P (1994) Examination of reaction between the NSF superplasticizer and cement. Cem Concr Res 24(5):948–958CrossRef

Labouret S, Looten-Baquet I, Bruneel C et al (1998) Ultrasound method for monitoring rheology properties evolution of cement. Ultrasonics 36(1):205–208CrossRef

Li QH, Kong XM (2009) Properties and microstructure of polymer modified mortar based on different acrylate latexes. J Chin Ceram Soc 1:107–114

Liu CC (2005) Copolymerization of polycarboxylic superplasticizer. Green Build 21(4):41–42 (in Chinese)

Liu YL, Kong XM, Yan PY (2011) Investigation on dynamical mechanical behaviours of cement-asphalt binders. Eng Mech 28(7):53–58 (in Chinese)

Liu YL, Kong XM, Zhang JY et al (2012a) Effect of curing temperature on strength development of cement asphalt mortars. J Build Mater 15(2):211–217 (in Chinese)CrossRef

Liu YL, Kong XM, Zhang YR et al (2012b) Static and dynamic mechanical properties of cement-asphalt composites. J Mater Civ Eng 25(10):1489–1497

Liu YL, Kong XM, Zou Y et al (2009) Static and dynamic mechanical behaviour of cement asphalt mortars. J Railw Sci Eng 6(3):1–7 (in Chinese)

Malhotra VM (1989) Superplasticizers: a global review with emphasis on durability and innovative concretes. ACI Spec Publ 119:1–18

Malhotra VM (1999) Innovative applications of superplasticizers in concrete: a review. Roles Admix High Perform Concr 5:421–460

Martini SA, Nehdi M (2009) Coupled effects of time and high temperature on rheological properties of cement pastes incorporating various superplasticizers. J Mater Civ Eng 21(8):392–401CrossRef

Mewis J, Wagner NJ (2009) Current trends in suspension rheology. J Nonnewton Fluid Mech 157(3):147–150MATHCrossRef

Miao CW, Ran QP, Hong JX et al (2009) Present situation and development trends of polycar-boxylate-type superplasticizers. Mater China 28(11):36–45 (in Chinese)

Mollah MYA, Adams WJ, Schennach R et al (2000) A review of cement-superplasticizer interactions and their models. Adv Cem Res 12(4):153–161CrossRef

Morris JF (2009) A review of microstructure in concentrated suspensions and its implications for rheology and bulk flow. Rheol Acta 48(8):909–923CrossRef

Murray BS (2011) Rheological properties of protein films. Curr Opin Colloid Interface Sci 16(1):27–35CrossRef

Nachbaur L, Mutin JC, Nonat A et al (2001) Dynamic mode rheology of cement and tricalcium silicate pastes from mixing to setting. Cem Concr Res 31(2):183–192CrossRef

Nehdi M, Al Martini S (2009) Estimating time and temperature dependent yield stress of cement paste using oscillatory rheology and genetic algorithms. Cem Concr Res 39(11):1007–1016CrossRef

Nehdi M, Mindess S, Aïtcin PC (1997) Statistical modelling of the microfiller effect on the rheology of composite cement pastes. Adv Cem Res 9(33):37–46CrossRef

Nguyen QD, Boger DV (1992) Measuring the flow properties of yield stress fluids. Annu Rev Fluid Mech 24(1):47–88MATHCrossRef

Ohama Y (1987) Principle of latex modification and some typical properties of latex-modified mortars and concretes adhesion; binders (materials); bond (paste to aggregate); carbonation; chlorides; curing; diffusion. ACI Mater J 84(6):511–518

Ohama Y (1997) Recent progress in concrete-polymer composites. Adv Cem Based Mater 5(2):31–40CrossRef

Ohama Y, Demura K, Kobayashi K et al (1991) Pore size distribution and oxygen diffusion resistance of polymer-modified mortars. Cem Concr Res 21(2):309–315CrossRef

Ohta A, Sugiyama T, Uomoto T (2000) Study of dispersing effects of polycarboxylate-based dispersant on fine particles. ACI Spec Publ 195:211–228

Papo A (1988) Rheological models for cement pastes. Mater Struct 21(1):41–46CrossRef

Papo A, Piani L (2004a) Effect of various superplasticizers on the rheological properties of Portland cement pastes. Cem Concr Res 34(11):2097–2101CrossRef

Papo A, Piani L (2004b) Flow behavior of fresh Portland cement pastes. Part Sci Technol 22(2):201–212CrossRef

Peng J, Qu J, Zhang J et al (2005) Adsorption characteristics of water-reducing agents on gypsum surface and its effect on the rheology of gypsum plaster. Cem Concr Res 35(3):527–531CrossRef

Petit JY, Khayat KH, Wirquin E (2006) Coupled effect of time and temperature on variations of yield value of highly flowable mortar. Cem Concr Res 36(5):832–841CrossRef

Petit JY, Khayat KH, Wirquin E (2009) Coupled effect of time and temperature on variations of plastic viscosity of highly flowable mortar. Cem Concr Res 39(3):165–170CrossRef

Petit JY, Wirquin E, Duthoit B (2005) Influence of temperature on yield value of highly flowable micromortars made with sulfonate-based superplasticizers. Cem Concr Res 35(2):256–266CrossRef

Petit JY, Wirquin E, Khayat KH (2010) Effect of temperature on the rheology of flowable mortars. Cem Concr Compos 32(1):43–53CrossRef

Petit JY, Wirquin E, Vanhove Y et al (2007) Yield stress and viscosity equations for mortars and self-consolidating concrete. Cem Concr Res 37(5):655–670CrossRef

Plank J, Dai Z, Andres PR (2006) Preparation and characterization of new Ca–Al–polycarboxylate layered double hydroxides. Mater Lett 60(29):3614–3617CrossRef

Plank J, Gretz M (2008) Study on the interaction between anionic and cationic latex particles and Portland cement. Colloids Surf A 330(2):227–233CrossRef

Plank J, Hirsch C (2007) Impact of zeta potential of early cement hydration phases on superplasticizer adsorption. Cem Concr Res 37(4):537–542CrossRef

Plank J, Sachsenhauser B (2006) Impact of molecular structure on zeta potential and adsorbed conformation of α-allyl-ω-methoxypolyethylene glycol-maleic anhydride superplasticizers. J Adv Concr Technol 4(2):233–239CrossRef

Plank J, Sachsenhauser B (2009) Experimental determination of the effective anionic charge density of polycarboxylate superplasticizers in cement pore solution. Cem Concr Res 39(1):1–5CrossRef

Pourchet S, Comparet C, Nicoleau L et al (2007) Influence of PC superplasticizers on tricalcium silicate hydration. In: Proceedings of the 12th international congress on the chemistry of cement-ICCC

Pourchet S, Comparet C, Nonat A et al (2006) Influence of three types of superplasticizers on tricalciumaluminate hydration in presence of gypsum. In: Proceedings of the 8th CANMET/ACI international conference on superplasticizers and other chemical admixtures in concrete, Sorrento, October 20–23, 2006, pp 151–158

Pourchet S, Liautaud S, Rinaldi D et al (2012) Effect of the repartition of the PEG side chains on the adsorption and dispersion behaviors of PCP in presence of sulfate. Cem Concr Res 42(2):431–439CrossRef

Probstein RF, Sengun MZ, Tseng TC (1994) Bimodal model of concentrated suspension viscosity for distributed particle sizes. J Rheol (1978-Present) 38(4):811–829CrossRef

Puertas F, Santos H, Palacios M et al (2005) Polycarboxylate superplasticiser admixtures: effect on hydration, microstructure and rheological behaviour in cement pastes. Adv Cem Res 17(2):77–89CrossRef

Qian XL, Zhao SL, Zhang XB et al (2002) The working mechanisms and property of high range water-reducers. J Nanjing Tech Univ 24(2):61–64 (in Chinese)

Rahman MK, Baluch MH, Malik MA (2014) Thixotropic behavior of self-compacting concrete with different mineral admixtures. Constr Build Mater 50:710–717CrossRef

Ran QP (2007) Structure, adsorption, dispersion and mechanism of comb-shaped copolymers. Nanjing University, Jiangsu (in Chinese)

Ran QP, Miao CW, Liu JP et al (2009a) Mechanism and effects of side chain length of comb-like copolymer dispersant on the dispersion of cement paste. J Chin Ceram Soc 37(7):1153–1159 (in Chinese)

Ran Q, Somasundaran P, Miao C et al (2009b) Effect of the length of the side chains of comb-like copolymer dispersants on dispersion and rheological properties of concentrated cement suspensions. J Colloid Interface Sci 336(2):624–633CrossRef

Ran Q, Somasundaran P, Miao C et al (2010) Adsorption mechanism of comb polymer dispersants at the cement/water interface. J Dispers Sci Technol 31(6):790–798CrossRef

Rao MA (2014) Flow and functional models for rheological properties of fluid foods. In: Rheology of fluid, semisolid, and solid foods. Springer US, pp 27–61

Ravi KM, Sutton DL (1990) New rheological correlation for cement slurries as a function of temperature. In: SPE annual technical conference and exhibition, society of petroleum engineers

Rößler C, Eberhardt A, Kučerová H et al (2008) Influence of hydration on the fluidity of normal Portland cement pastes. Cem Concr Res 38(7):897–906CrossRef

Romano RCDO, Pileggi RG (2012) Temperature’s role in the rheological behaviour of cementitious pastes prepared with air-entraining admixtures. Appl Rheol 22:24333–24338

Roussel N (2006) A thixotropy model for fresh fluid concretes: theory, validation and applications. Cem Concr Res 36(10):1797–1806CrossRef

Roussel N (2007) Rheology of fresh concrete: from measurements to predictions of casting processes. Mater Struct 40(10):1001–1012CrossRef

Roussel N, Geiker MR, Dufour F et al (2007) Computational modeling of concrete flow: general overview. Cem Concr Res 37(9):1298–1307CrossRef

Roussel N, Stefani C, Leroy R (2005) From mini-cone test to Abrams cone test: measurement of cement-based materials yield stress using slump tests. Cem Concr Res 35(5):817–822CrossRef

Rubio-Hernández FJ, Velázquez-Navarro JF, Ordóñez-Belloc LM (2013) Rheology of concrete: a study case based upon the use of the concrete equivalent mortar. Mater Struct 46(4):587–605CrossRef

Rumpf H (1962) The strength of granules and agglomerates. Interscience, New York

Saija LM (1995) Waterproofing of portland cement mortars with a specially designed polyacrylic latex. Cem Concr Res 25(3):503–509CrossRef

Sakai E, Kasuga T, Sugiyama T et al (2006) Influence of superplasticizers on the hydration of cement and the pore structure of hardened cement. Cem Concr Res 36(11):2049–2053CrossRef

Sarkar SL, Aimin X (1992) Preliminary study of very early hydration of superplasticized C3A+ gypsum by environmental SEM. Cem Concr Res 22(4):605–608CrossRef

Scales PJ, Johnson SB, Healy TW et al (1998) Shear yield stress of partially flocculated colloidal suspensions. AIChE J 44(3):538–544CrossRef

Schmidt W, Brouwers HJH, Kühne HC et al (2014) Influences of superplasticizer modification and mixture composition on the performance of self-compacting concrete at varied ambient temperatures. Cem Concr Compos 49:111–126CrossRef

Schultz MA, Struble LJ (1993) Use of oscillatory shear to study flow behavior of fresh cement paste. Cem Concr Res 23(2):273–282CrossRef

Schwartzentruber LDA, Le Roy R, Cordin J (2006) Rheological behaviour of fresh cement pastes formulated from a Self-Compacting Concrete (SCC). Cem Concr Res 36(7):1203–1213CrossRef

Shen Z, Wang GT (1991) Colloid and surface chemistry. Chemical Industry Press, Beijing (in Chinese)

Sheinn AMM, Ho DWS, Tam CT (2002) Rheological model for self-compacting concrete-paste rheology. In: Proceedings of the 27th conference on our world in concrete and structures, Singapore, pp 28–29

Shi TJ, Wu DF (2009) Foundation of polymer rheology. Chemical Industry Press, Beijing (in Chinese)

Shin JY, Hong JS, Suh JK et al (2008) Effects of polycarboxylate-type superplasticizer on fluidity and hydration behavior of cement paste. Korean J Chem Eng 25(6):1553–1561CrossRef

Shroff AV, Joshi NH, Shah DL (1996) Rheological properties of micro fine cement dust grouts. Grouting and Deep Mixing Balkema

Song H, Do J, Soh Y (2006) Feasibility study of asphalt-modified mortars using asphalt emulsion. Constr Build Mater 20(5):332–337CrossRef

Struble LJ, Lei WG (1995) Rheological changes associated with setting of cement paste. Adv Cem Based Mater 2(6):224–230CrossRef

Struble L, Sun GK (1995) Viscosity of Portland cement paste as a function of concentration. Adv Cem Based Mater 2(2):62–69CrossRef

Struble L, Szecsy R, Lei WG et al (1998) Rheology of cement paste and concrete. Cem Concr Aggreg 20(2):269–277CrossRef

Su Z (1995) Microstructure of polymer cement concrete. Ph.D. thesis, Material Sciences Group, Delft University of Technology, Delft, Netherlands

Su Z, Sujata K, Bijen JM et al (1996) The evolution of the microstrcture styrene acrylate polymer-modified cement pastes at the early stage of cement hydration. Adv Cem Base Mater 3:87–93CrossRef

Subramaniam KV, Lee J, Christensen BJ (2005) Monitoring the setting behavior of cementitious materials using one-sided ultrasonic measurements. Cem Concr Res 35(5):850–857CrossRef

Subramaniam KV, Wang X (2010) An investigation of microstructure evolution in cement paste through setting using ultrasonic and rheological measurements. Cem Concr Res 40(1):33–44CrossRef

Sun Z, Voigt T, Shah SP (2006) Rheometric and ultrasonic investigations of viscoelastic properties of fresh Portland cement pastes. Cem Concr Res 36(2):278–287CrossRef

Swamy RN (1989) Superplasticizers and concrete durability. ACI Special Publication, vol 119

Thomas DG (1965) Transport characteristics of suspension: VIII. A note on the viscosity of Newtonian suspensions of uniform spherical particles. J Colloid Sci 20(3):267–277CrossRef

Uchikawa H, Hanehara S, Shirasaka T et al (1992) Effect of admixture on hydration of cement, adsorptive behavior of admixture and fluidity and setting of fresh cement paste. Cem Concr Res 22(6):1115–1129CrossRef

Umlauf R (1993) Rheological characterization of microfine cement suspension-examination with a shear stress controller rheometer Grouting in Rock and Concrete. Balkenra 91–95

Valič MI (2000) Hydration of cementitious materials by pulse echo USWR: method, apparatus and application examples. Cem Concr Res 30(10):1633–1640CrossRef

Vand V (1948) Viscosity of solutions and suspensions. II. Experimental determination of the viscosity–concentration function of spherical suspensions. J Phys Chem 52(2):300–314CrossRef

Wallevik JE (2006) Relationship between the Bingham parameters and slump. Cem Concr Res 36(7):1214–1221CrossRef

Wang DM, Zhang LR, Zhang WL et al (2013) Effects of superplasticizers on multi-level flocculation structure of fresh cement paste. J Build Mater 15(6):755–759 (in Chinese)

Wang F, Liu Z, Wang T et al (2008a) A novel method to evaluate the setting process of cement and asphalt emulsion in CA mortar. Mater Struct 41(4):643–647MathSciNetCrossRef

Wang FZ, Wang T, Hu SG et al (2008b) Rheological behavior of cement asphalt mortar. Eng J Wuhan Univ 41(4):69–72 (in Chinese)

Wang LJ, Huang FY, Ma XC (2008c) Experimental research on the saturation point of superplasticizers in cement based on fractal dimension. J Wuhan Univ Technol 30(2):28–31 (in Chinese)

Wang LJ, Tan XQ, Cao ML (2008d) Study on flocculated cement based on fractal theory. J Shenyang Jianzhu Univ (Nat Sci) 23(1):82–84 (in Chinese)

Wang Q, Yan PY, Ruhan A et al (2011) Strength mechanism of cement-asphalt mortar. J Mater Civil Eng 23(9):1353–1359CrossRef

Wang R, Wang PM (2008) Application of polyacrylic ester latex to cement mortar. J Chin Ceram Soc 36(7):946–949

Wang R, Wang PM, Li XG (2005) Physical and mechanical properties of styrene-butadiene rubber emulsion modified cement mortars. Cem Concr Res 35(5):900–906CrossRef

Wang T (2008) Research and application on CA mortar in Ballastless slab track of high speed railway. Wuhan University of Technology, Wuhan (in Chinese)

Wang X, Subramaniam KV, Lin FB (2010) Ultrasonic measurement of viscoelastic shear modulus development in hydrating cement paste. Ultrasonics 50(7):726–738CrossRef

Wang ZM (2006) The interface chemistry phenomena and rheological properties of “cement-water-superplasticizer” system. Beijing University of Technology, Beijing (in Chinese)

Winnefeld F, Becker S, Pakusch J et al (2007) Effects of the molecular architecture of comb-shaped superplasticizers on their performance in cementitious systems. Cem Concr Compos 29(4):251–262CrossRef

Wu ZW, Lian HZ (1999) High performance concrete. China Railway Publishing Press, Beijing (in Chinese)

Xu G, Beaudoin JJ, Jolicoeur C et al (2000) Interfacial transition zone characterization of Portland cement mortars containing relatively high dosages of polynaphthalene sulfonate superplasticizers. Concr Sci Eng (Fr) 2(7):150–157

Xu YM (1989) A unified rheological model for non-dilatancy viscoplastic fluids. J Wuhan Univ Technol 11(4):431–436 (in Chinese)

Yahia A, Khayat KH (2001) Analytical models for estimating yield stress of high performance pseudoplastic grout. Cem Concr Res 31(5):731–738CrossRef

Yamada K, Takahashi T, Hanehara S et al (2000) Effects of the chemical structure on the properties of polycarboxylate-type superplasticizer. Cem Concr Res 30(2):197–207CrossRef

Yamada K, Yanagisawa T, Hanehara S (1999) Influence of temperature on the dispersibility of polycarboxylate type superplasticizer for highly fluid concrete. In: International RILEM symposium on self-compacting concrete, pp 437–448

Yang JB, Yan PY, Kong XM et al (2010) Study on the hardening mechanism of cement asphalt binder. Sci China Technol Sci 53(5):1406–1412CrossRef

Yang Z, Shi X, Creighton AT et al (2009) Effect of styrene–butadiene rubber latex on the chloride permeability and microstructure of Portland cement mortar. Constr Build Mater 23(6):2283–2290CrossRef

Ye DM, Sun ZP, Zhen BC et al (2012) Current research status and development of polymer modified cementitious repair material. Mater Rev 7:028 (in Chinese)

Yoshioka K, Sakai E, Daimon M et al (1997) Role of steric hindrance in the performance of superplasticizers for concrete. J Am Ceram Soc 80(10):2667–2671CrossRef

Yoshioka K, Tazawa E, Kawai K et al (2002) Adsorption characteristics of superplasticizers on cement component minerals. Cem Concr Res 32(10):1507–1513CrossRef

Zhang DY (2001) Study on the preparation of architectural latex coatings and its dispersion, rheology mechanism. South China University of Technology, Guangzhou (in Chinese)

Zhang LR, Wang DM, Zhang WL et al (2013) Observation of multi-level flocculation structure of fresh paste using laser scanning confocal microscopy. J Chin Electron Microsc Soc 32(3):231–236 (in Chinese)MathSciNet

Zhang YR, Kong XM, Cao EX (2010) Influence of temperature on flowability and hydration rate of fresh cement asphalt binder. J Chin Ceram Soc 38(11):156–161 (in Chinese)

Zhang YR, Kong XM, Hou SS et al (2012) Study on the rheological properties of fresh cement asphalt paste. Constr Build Mater 27(1):534–544CrossRef

Zhang YR, Kong XM, Zhang ZL et al (2011) Impermeability of polymer modified mortar with different acrylate latexes. Science and Technology of Commercial Mortar (in Chinese)

Zhong S, Chen Z (2002) Properties of latex blends and its modified cement mortars. Cem Concr Res 32(10):1515–1524CrossRef

Zhou Z, Solomon MJ, Scales PJ et al (1999) The yield stress of concentrated flocculated suspensions of size distributed particles. J Rheol (1978-Present) 43(3):651–671CrossRef

Zingg A, Holzer L, Kaech A et al (2008) The microstructure of dispersed and non-dispersed fresh cement pastes-new insight by cryo-microscopy. Cem Concr Res 38(4):522–529CrossRef

Titel: Introduction
verfasst von: Yanrong Zhang
Verlag: Springer Singapore
Buch: Study on Microstructure and Rheological Properties of Cement-Chemical Admixtures-Water Dispersion System at Early Stage
Print ISBN: 978-981-10-4569-1

Electronic ISBN: 978-981-10-4570-7

Copyright-Jahr: 2018
DOI: https://doi.org/10.1007/978-981-10-4570-7_1

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partner

Marktübersichten