nach oben

Erschienen in:

2017 | OriginalPaper | Buchkapitel

1. Introduction

verfasst von : Rajeev Kumar Gupta, B. S. Murty, Nick Birbilis

Erschienen in: An Overview of High-energy Ball Milled Nanocrystalline Aluminum Alloys

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Aluminum (Al) alloys, due to their lightweight and excellent physical properties are commonly used in aerospace, marine and automotive applications [1–5]. Various types of wrought Al alloys, with designations ranging from the so-called 1xxx to 8xxx series (and named according to the predominant alloying additions) have been developed in the past century [2]. Alloy properties depend upon chemical composition and thermomechanical processing employed, both of which influence the microstructure and the properties to a large extent. Among these alloys, the 7xxx series alloys (based on the Al-Zn-Mg system) have traditionally been the most commonly employed “high strength” alloys. The tensile strength of these alloys is as high as ~ 600 MPa, with modest ductility [2].

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nächstes Kapitel High-Energy Ball Milling Parameters in Production of Nanocrystalline Al Alloys

Davis JR (1996) ASM speciality book, Aluminium and aluminium alloys. ASM International, Materials Park, OH

Polmear IJ (2006) Light alloys, 4th edn. Butterworth-Heinemann, London

Cole GS, Sherman AM (1995) Light weight materials for automotive applications. Mater Charact 35:3–9CrossRef

Miller WS, Zhuang L, Bottema J, Wittebrood AJ, De Smet P, Haszler A, Vieregge A (2000) Recent development in aluminium alloys for the automotive industry. Mater Sci Eng A 280:37–49CrossRef

Rowe J (2012) Advanced materials in automotive engineering. Woodhead Publishing, CambridgeCrossRef

Mallick PK (2012) Advanced materials for automotive applications: an overview. Adv Mater Auto Eng 2:5–27CrossRef

Lu K (2010) The future of metals. Science 328:319–320CrossRef

Liddicoat PV, Liao XZ, Zhao Y, Zhu Y, Murashkin MY, Lavernia EJ, Valiev RZ, Ringer SP (2010) Nanostructural hierarchy increases the strength of aluminium alloys. Nat Commun 1:63CrossRef

Inoue A, Kimura H (2000) High-strength aluminum alloys containing nanoquasicrystalline particles. Mater Sci Eng A 286:1–10CrossRef

10.

Inoue A, Kimura H (2001) Fabrications and mechanical properties of bulk amorphous, nanocrystalline, nanoquasicrystalline alloys in aluminum-based system. J Light Met 1:31–41CrossRef

11.

Galano M, Audebert F, Escorial AG, Stone IC, Cantor B (2010) Nanoquasicrystalline Al-Fe-Cr-based alloys with high strength at elevated temperature. J Alloys Compd 495:372–376CrossRef

12.

Gleiter H (1989) Nanocrystalline materials. Prog Mater Sci 33:223–315CrossRef

13.

McFadden SX, Mishra RS, Vallev RZ, Zhilyaev AP, Mukherjee AK (1999) Low-temperature superplasticity in nanostructured nickel and metal alloys. Nature 398:684–686CrossRef

14.

Wang Y, Chen M, Zhou F, Ma E (2002) High tensile ductility in a nanostructured metal. Nature 419:912–915CrossRef

15.

Gleiter H (2000) Nanostructured materials: basic concepts and microstructure. Acta Mater 48:1–29CrossRef

16.

Gleiter H (1995) Nanostructured materials: state of the art and perspectives. Nanostruct Mater 6:3–14CrossRef

17.

Gleiter H (1992) Nanostructured materials. Adv Mater 4:474–481CrossRef

18.

Bohn R, Haubold T, Birringer R, Gleiter H (1991) Nanocrystalline intermetallic compounds – an approach to ductility? Scr Metall Mater 25:811–816CrossRef

19.

Liu G, Zhang GJ, Jiang F, Ding XD, Sun YJ, Sun J, Ma E (2013) Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility. Nat Mater 12:344–350CrossRef

20.

Langdon TG (2013) Twenty-five years of ultrafine-grained materials: achieving exceptional properties through grain refinement. Acta Mater 61:7035–7059CrossRef

21.

Gupta RK, Birbilis N, Zhang J (2012) Oxidation resistance of nanocrystalline alloys. In: Shih H (ed) Corrosion resistance. InTech, Rijeka, pp 213–238

22.

Gupta RK, Singh Raman R, Koch CC (2010) Fabrication and oxidation resistance of nanocrystalline Fe10Cr alloy. J Mater Sci 45:4884–4888CrossRef

23.

Inoue A (1998) Amorphous, nanoquasicrystalline and nanocrystalline alloys in Al-based systems. Prog Mater Sci 43:365–520CrossRef

24.

Witkin DB, Lavernia EJ (2006) Synthesis and mechanical behavior of nanostructured materials via cryomilling. Prog Mater Sci 51:1–60CrossRef

25.

Meyers MA, Mishra A, Benson DJ (2006) Mechanical properties of nanocrystalline materials. Prog Mater Sci 51:427–556CrossRef

26.

Suryanarayana C (2001) Mechanical alloying and milling. Prog Mater Sci 46:1–184CrossRef

27.

Zhang DL (2004) Processing of advanced materials using high-energy mechanical milling. Prog Mater Sci 49:537–560CrossRef

28.

Pabi SK, Manna I, Murty BS (1999) Alloying behaviour in nanocrystalline materials during mechanical alloying. Bull Mater Sci 22:321–327CrossRef

29.

Guo S, Liu CT (2011) Phase stability in high entropy alloys: formation of solid-solution phase or amorphous phase. Prog Nat Sci Mater Int 21:433–446CrossRef

30.

Murty BS, Ranganathan S (1998) Novel materials synthesis by mechanical alloying/milling. Int Mater Rev 43:101–141CrossRef

31.

Schaffer GB, McCormick PG (1992) Mechanical alloying. Met Forum 16:91–97

32.

Koch CC (1997) Synthesis of nanostructured materials by mechanical milling: problems and opportunities. Nanostruct Mater 9:13–22CrossRef

33.

Raman RS, Gupta RK, Koch CC (2010) Resistance of nanocrystalline vis-à-vis microcrystalline Fe–Cr alloys to environmental degradation and challenges to their synthesis. Philos Mag 90:3233–3260CrossRef

34.

Raman R, Gupta RK (2009) Oxidation resistance of nanocrystalline vis-à-vis microcrystalline Fe–Cr alloys. Corros Sci 51:316–321CrossRef

35.

Gupta RK, Fabijanic D, Dorin T, Qiu Y, Wang JT, Birbilis N (2015) Simultaneous improvement in the strength and corrosion resistance of Al via high-energy ball milling and Cr alloying. Mater Des 84:270–276CrossRef

36.

Gupta RK, Fabijanic D, Zhang R, Birbilis N (2015) Corrosion behaviour and hardness of the in situ consolidated Al and Al-Cr alloys produced via high-energy ball milling. Corros Sci 98:643–650CrossRef

37.

Suryanarayana C, Al-Aqeeli N (2013) Mechanically alloyed nanocomposites. Prog Mater Sci 58:383–502CrossRef

38.

Suryanarayana C, Koch CC (2000) Nanocrystalline materials – current research and future directions. Hyperfine Interact 130:5–44CrossRef

39.

Koch CC, Cho YS (1992) Nanocrystals by high energy ball milling. Nanostruct Mater 1:207–212CrossRef

40.

Gupta RK, Sukiman NL, Cavanaugh MK, Hinton BRW, Hutchinson CR, Birbilis N (2012) Metastable pitting characteristics of aluminium alloys measured using current transients during potentiostatic polarisation. Electrochim Acta 66:245–254CrossRef

41.

Gupta RK, Deschamps A, Cavanaugh MK, Lynch SP, Birbilis N (2012) Relating the early evolution of microstructure with the electrochemical response and mechanical performance of a Cu-rich and Cu-lean 7xxx aluminum alloy. J Electrochem Soc 159:C492–C502CrossRef

42.

Sukiman NL, Zhou X, Birbilis N, Hughes AE, Mol JMC, Garcia SJ, Zhou X, Thompson GE (2012) Durability and corrosion of aluminium and its alloys: overview, property space, techniques and developments. In: Ahmad Z (ed) Aluminium alloys – new trends in fabrication and applications. InTech, Rijeka

43.

Sukiman NL, Gupta RK, Birbilis N, Buchheit RG (2012) General aspects of the corrosion of aluminium alloys and performance of experimental alloys. Annual conference of the Australasian Corrosion Association, pp 696–702

44.

Gupta RK, Raman RKS, Koch CC, Murty BS (2013) Effect of nanocrystalline structure on the corrosion of a Fe20Cr alloy. Int J Electrochem Sci 8:6791–6806

45.

Ralston KD, Birbilis N (2010) Effect of grain size on corrosion: a review. Corrosion 66:0750051–07500513CrossRef

46.

Gupta RK, Singh Raman R, Koch C (2012) Electrochemical characteristics of nano and microcrystalline Fe–Cr alloys. J Mater Sci 47:6118–6124CrossRef

47.

Gupta RK, Darling KS, Singh Raman RK, Ravi KR, Koch CC, Murty BS, Scattergood RO (2012) Synthesis, characterization and mechanical behaviour of an in situ consolidated nanocrystalline FeCrNi alloy. J Mater Sci 47:1562–1566CrossRef

48.

Gupta RK, Birbilis N (2015) The influence of nanocrystalline structure and processing route on corrosion of stainless steel: a review. Corros Sci 92:1–15CrossRef

49.

Mondal K, Murty BS, Chatterjee UK (2006) Electrochemical behavior of multicomponent amorphous and nanocrystalline Zr-based alloys in different environments. Corros Sci 48:2212–2225CrossRef

50.

Mondal K, Murty BS, Chatterjee UK (2005) Electrochemical behaviour of amorphous and nanoquasicrystalline Zr–Pd and Zr–Pt alloys in different environments. Corros Sci 47:2619–2635CrossRef

51.

Das N, Dey GK, Murty BS, Pabi SK (2005) On amorphization and nanocomposite formation in Al-Ni-Ti system by mechanical alloying. Pramana J Phys 65:831–840CrossRef

52.

Murty BS (1993) Mechanical alloying—a novel synthesis route for amorphous phases. Bull Mater Sci 16:1–17CrossRef

53.

Murty BS, Naik MD, Rao MM, Ranganathan S (1992) Glass forming composition range in the Al-Ti system by mechanical alloying. Met Forum 16:19–26

54.

Koch CC, Whittenberger JD (1996) Mechanical milling/alloying of intermetallics. Intermetallics 4:339–355CrossRef

Titel: Introduction
verfasst von: Rajeev Kumar Gupta
B. S. Murty
Nick Birbilis
Verlag: Springer International Publishing
Buch: An Overview of High-energy Ball Milled Nanocrystalline Aluminum Alloys
Print ISBN: 978-3-319-57029-7

Electronic ISBN: 978-3-319-57031-0

Copyright-Jahr: 2017
DOI: https://doi.org/10.1007/978-3-319-57031-0_1

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht