nach oben

Clean Technologies and Environmental Policy

Erschienen in:

01.06.2014 | Original Paper

Investigation of Pb(II) adsorption onto pumice samples: application of optimization method based on fractional factorial design and response surface methodology

verfasst von: Tekin Şahan, Dilara Öztürk

Erschienen in: Clean Technologies and Environmental Policy | Ausgabe 5/2014

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The adsorption of Pb(II) by pumice samples collected from the Mount Ararat region, located in eastern Turkey, was investigated in a batch system. The combined and individual effects of operating parameters on adsorption were analyzed using a multi-step response surface methodology. In the first step the most effective factors, which are initial Pb(II) concentration, pH, and temperature, were determined via fractional factorial design. Then the steepest ascent/descent followed by central composite design were used to interpret the optimum adsorption conditions for the highest Pb(II) removal. The optimum adsorption conditions were determined to be initial Pb(II) concentration of 84.30 mg/L, pH of 5.75, and temperature of 41.11 °C. At optimum conditions, the adsorption capacity of pumice for Pb(II) was found to be 7.46 mg/g according to a removal yield of 88.49 %. The obtained data agreed with a second-order rate expression and fit the Langmuir isotherm very well. The thermodynamic parameters such as ΔH°, ΔS°, and ΔG° for the Pb(II) adsorption were calculated at four different temperatures. The present results indicate that pumice is a suitable adsorbent material for adsorption of Pb(II) from aqueous solutions.

Vorheriger Artikel A study for producing drinking water with safe trihalomethane concentrations

Nächster Artikel The potential of biomass supply for energetic utilization in a small Italian region: Basilicata

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Abdel-Halim SH, Shehata AMA, El-Shahat MF (2003) Removal of lead ions from industrial wastewater by different types of natural materials. Water Res 37:1678–1683CrossRef

Abo-Farhaa SA, Abdel-Aala AY, Ashourb IA, Garamona SE (2009) Removal of some heavy metal cations by synthetic resin purolite C100. J Hazard Mater 169:190–194CrossRef

Adebowale KO, Unuabonah IE, Olu-Owolabi BI (2006) The effect of some operating variables on the adsorption of lead and cadmium ions on kaolinite clay. J Hazard Mater 134:130–139CrossRef

Ajmal M, Rao RAK, Anwar S, Ahmad J, Ahmad R (2003) Adsorption studies on rice husk: removal and recovery of Cd(II) from wastewater. Bioresour Technol 86:147–149CrossRef

Anirudhan TS, Sreekumari SS (2011) Adsorptive removal of heavy metal ions from industrial effluents using activated carbon derived from waste coconut buttons. J Environ Sci 23:1989–1998CrossRef

Bée A, Talbot D, Abramson S, Dupuis V (2011) Magnetic alginate beads for Pb(II) ions removal from wastewater. J Colloid Interface Sci 362:486–492CrossRef

Bulut Y, Baysal Z (2006) Removal of Pb(II) from wastewater using wheat bran. J Environ Manage 78:107–113CrossRef

Cadena F, Rizvi R, Peters RW (1990) Feasibility studies for the removal of heavy metals from solution using tailored bentonite. In: Hazardous and industrial wastes, Proceedings of the twenty-second mid-Atlantic industrial waste conference, Drexel University, pp 77–94

Caliskan N, Kul AR, Alkan S, Gokirmak Sogut E, Alacabey I (2011) Adsorption of Zinc(II) on diatomite and manganese-oxide-modified diatomite: a kinetic and equilibrium study. J Hazard Mater 193:27–36CrossRef

Chen H, Zhao J, Dai G, Wu J, Yan H (2010) Adsorption characteristics of Pb(II) from aqueous solution onto a natural biosorbent, fallen Cinnamomum camphora leaves. Desalination 262:174–182CrossRef

Doyurum S, Celik A (2006) Pb(II) and Cd(II) removal from aqueous solutions by olive cake. J Hazard Mater 138:22–28CrossRef

Dubinin MM, Radushkevich LV (1947) Equation of the characteristics curve of activated charcoal. Chem Zent 1:875

Elovich SY, Larinov OG (1962) Theory of adsorption from solutions of non electrolytes on solid (I) equation adsorption from solutions and the analysis of its simplest form (II), verification of the equation of adsorption isotherm from solutions. Izv Akad Nauk SSSR Otd Khim Nauk 2:209–216

Erdem M, Ozverdi A (2005) Lead adsorption from aqueous solution onto siderite. Sep Purif Technol 42:259–264CrossRef

Ersoy B, Sariisik A, Dikmen S, Sariisik G (2010) Characterization of acidic pumice and determination of its electrokinetic properties in water. Powder Technol 197:129–135CrossRef

Freundlich HMF (1906) Über die adsorption in lösungen. Z Phys Chem (Leipzig) 57A:385–470

Goel J, Kadirvelu K, Rajagopal C, Garg VK (2005) Removal of lead(II) by adsorption using treated granular activated carbon: batch and column studies. J Hazard Mater 125:211–220CrossRef

Hara T, Endo T, Ikeda K, Inaba N (1979) Concentration of heavy metal ions by use of synthetic pumice and its related adsorbents. Sci Eng Rev Doshisha Univ 20:1625

Jiang M, Wang Q, Jin X, Chen Z (2009) Removal of Pb(II) from aqueous solution using modified and unmodified kaolinite clay. J Hazard Mater 170:332–339CrossRef

Karatas M (2012) Removal of Pb(II) from water by natural zeolitic tuff: kinetics and thermodynamics. J Hazard Mater 199–200:383–389CrossRef

Kardam A, Raj KR, Srivastava S, Srivastava MM (2013) Nanocellulose fibers for biosorption of cadmium, nickel, and lead ions from aqueous solution. Clean Techn Environ Policy. doi:10.1007/s10098-013-0634-2

Katsumata H, Kaneco S, Inomata K, Itoha K, Funasaka K, Masuyama K, Suzuki T, Ohta K (2003) Removal of heavy metals in rinsing wastewater from plating factory by adsorption with economical viable materials. J Environ Manage 69:187–191CrossRef

Lagergren S (1898) Zur theorie der sogenannten adsorption gelöster stoffe. Kungliga Svenska Vetenskapsakademiens, Handlingar, pp 1–39

Langmuir I (1918) The adsorption of gases on plane surfaces of glass, mica and platinum. J Am Chem Soc 40:1361–1403CrossRef

Leppert D (1990) Heavy metal sorption with clinoptilolite zeolite: alternatives for treating contaminated soil and water. Min Eng 42:604–608

Li Q, Zhai J, Zhang W, Wang M, Zhou J (2007) Kinetic studies of adsorption of Pb(II), Cr(III) and Cu(II) from aqueous solution by sawdust and modified peanut husk. J Hazard Mater 141:163–167CrossRef

Li Y, Zhang FS, Xiu FR (2009) Arsenic(V) removal from aqueous system using adsorbent developed from a high iron-containing fly ash. Sci Total Environ 407:5780–5786CrossRef

Liu Y, Shen X, Xian Q, Chen H, Zou H, Gao S (2006) Adsorption of copper and lead in aqueous solution onto bentonite modified by 4-methylbenzo-15-crown-5. J Hazard Mater 137:1149–1155CrossRef

Lo W, Chua H, Lam KH, Bi SH (1999) A comparative investigation on the biosorption of lead by filamentous fungal biomass. Chemosphere 39:2723–2736CrossRef

Lodeiro P, Barriada JL, Herrero R, Sastre de Vicente ME (2006) The marine macroalga Cystoseira baccata as biosorbent for cadmium(II) and lead(II) removal: kinetic and equilibrium studies. Environ Pollut 142:264–273CrossRef

Ma X, Li L, Yang L, Su C, Wang K, Yuan S, Zhou J (2012) Adsorption of heavy metal ions using hierarchical CaCO₃–maltose meso/macroporous hybrid materials: adsorption isotherms and kinetic studies. J Hazard Mater 209–210:467–477CrossRef

Machida M, Aikawa M, Tatsumoto H (2005) Prediction of simultaneous adsorption of Cu(II) and Pb(II) onto activated carbon by conventional Langmuir type equations. J Hazard Mater 120:271–275CrossRef

Merrikhpour H, Jalali M (2012) Waste calcite sludge as an adsorbent for the removal of cadmium, copper, lead, and zinc from aqueous solutions. Clean Technol Environ Policy 14:845–855CrossRef

Miretzky P, Munoz C, Cantoral-Uriza E (2011) Cd²⁺ adsorption on alkaline-pretreated diatomaceous earth: equilibrium and thermodynamic studies. Environ Chem Lett 9:55–63CrossRef

Mittal A, Krishnan L, Gupta VK (2005) Removal and recovery of malachite green from wastewater using agricultural waste material, de-oiled soya. Sep Purif Technol 43:125–133CrossRef

Moradi O, Aghaie M, Zare K, Monajjemi M, Aghaie H (2009) The study of adsorption characteristics Cu²⁺ and Pb²⁺ ions onto PHEMA and P(MMA-HEMA) surfaces from aqueous single solution. J Hazard Mater 170:673–679CrossRef

Myers RH, Montgomery DC (2002) Response surface methodology. Wiley, New York, p 43

Ngah WSW, Fatinathan S (2010) Adsorption characterization of Pb(II) and Cu(II) ions onto chitosan-tripolyphosphate beads: kinetic, equilibrium and thermodynamic studies. J Environ Manage 91:958–969CrossRef

Ozay O, Ekici S, Baran Y, Kubilay S, Aktas N, Sahiner N (2010) Utilization of magnetic hydrogels in the separation of toxic metal ions from aqueous environments. Desalination 260:57–64CrossRef

Ozer A, Ozer D, Ozer A (2004) The adsorption of copper(II) ions on to dehydrated wheat bran (DWB): determination of the equilibrium and thermodynamic parameters. Process Biochem 39:2183–2191CrossRef

Pandey KK, Prasad G, Singh VN (1985) Copper removal from aqueous solutions by fly ash. Water Res 19(7):869–873CrossRef

Panuccio MR, Sorgona` A, Rizzo M, Cacco G (2009) Cadmium adsorption on vermiculite, zeolite and pumice: batch experimental studies. J Environ Manage 90:364–374CrossRef

Paulino AT, Belfiore LA, Kubota LT, Muniz EC, Almeida VC, Tambourgi EB (2011) Effect of magnetite on the adsorption behavior of Pb(II), Cd(II), and Cu(II) in chitosan-based hydrogels. Desalination 275:187–196CrossRef

Perrott KW (1977) Surface charge characteristics of amorphous aluminosilicates. Clay Clay Miner 25:417–421CrossRef

Raji C, Anirudhan TS (1997) Chromium(VI) adsorption by sawdust: kinetics and equilibrium. Indian J Chem Technol 4:228–236

Rao RAK, Khan MA (2007) Removal and recovery of Cu(II), Cd(II) and Pb(II) ions from single and multimetal systems by batch and column operation on neem oil cake (NOC). Sep Purif Technol 57:394–402CrossRef

Rashid K, Suresh Kumar Reddy K, Shoaibi AA, Srinivasakannan C (2013) Sulfur-impregnated porous carbon for removal of mercuric chloride: optimization using RSM. Clean Technol Environ Policy. doi:10.1007/s10098-012-0564-4

Sahan T, Ceylan H, Sahiner N, Aktas N (2010) Optimization of removal conditions of copper ions from aqueous solutions by Trametes versicolor. Bioresour Technol 101:4520–4526CrossRef

Sakurai K, Ohdate Y, Kyuma K (1988) Comparison of salt titration and potentiometric titration methods for the determination of zero point of charge (ZPC). Soil Sci Plant Nutr 34(2):171–182CrossRef

Sakurai K, Ohdate Y, Kyuma K (1989) Factors affecting zero point of charge (ZPC) of variable charge soils. Soil Sci Plant Nutr 35(1):21–31CrossRef

Sarı A, Tuzen M (2009) Kinetic and equilibrium studies of biosorption of Pb(II) and Cd(II) from aqueous solution by macrofungus (Amanita rubescens) biomass. J Hazard Mater 164:1004–1011CrossRef

Sarı A, Tuzen M, Soylak M (2007a) Adsorption of Pb(II) and Cr(III) from aqueous solution on Celtek clay. J Hazard Mater 144:41–46CrossRef

Sarı A, Tuzen M, Cıtak D, Soylak M (2007b) Equilibrium, kinetic and thermodynamic studies of adsorption of Pb(II) from aqueous solution onto Turkish kaolinite clay. J Hazard Mater 149:283–291CrossRef

Sarı A, Tuzen M, Cıtak D, Soylak M (2007c) Adsorption characteristics of Cu(II) and Pb(II) onto expanded perlite from aqueous solution. J Hazard Mater 148:387–394CrossRef

Sekar M, Sakthi V, Rengaraj S (2004) Kinetics and equilibrium adsorption study of lead (II) on activated carbon prepared from coconut shell. J Colloid Interface Sci 279:307–313CrossRef

Singh KK, Talat M, Hasan SH (2006) Removal of lead from aqueous solutions by agricultural waste maize bran. Bioresour Technol 97:2124–2130CrossRef

Su S, Nie H, Zhu L, Chen T (2009) Optimization of adsorption conditions of papain on dye affinity membrane using response surface methodology. Bioresour Technol 100:2336–2340CrossRef

Sugashini S, Meera Sheriffa Begum KM (2013) Optimization using central composite design (CCD) for the biosorption of Cr(VI) ions by cross linked chitosan carbonized rice husk (CCACR). Clean Technol Environ Policy 15:293–302CrossRef

Tiwari D, Kim H, Lee S (2007) Removal behavior of sericite for Cu(II) and Pb(II) from aqueous solutions: batch and column studies. Sep Purif Technol 57:11–16CrossRef

Yadava KP, Tyagi BS, Singh VN (1991) Effect of temperature on the removal of lead(II) by adsorption on China clay and wollastonite. J Chem Technol Biotechnol 51:47–60CrossRef

Yetilmezsoy K, Demirel S, Vanderbei RJ (2009) Response surface modeling of Pb(II) removal from aqueous solution by Pistacia vera L.: Box–Behnken experimental design. J Hazard Mater 171:551–562CrossRef

Yu B, Zhang Y, Shukla A, Shukla SS, Dorris KL (2001) The removal of heavy metals from aqueous solutions by sawdust adsorption removal of lead and comparison of its adsorption with copper. J Hazard Mater 84:83–94CrossRef

Zulkali MMD, Ahmad AL, Norulakmal NH (2006) Oryza sativa L. husk as heavy metal adsorbent: optimization with lead as model solution. Bioresour Technol 97:21–25CrossRef

Titel: Investigation of Pb(II) adsorption onto pumice samples: application of optimization method based on fractional factorial design and response surface methodology
verfasst von: Tekin Şahan
Dilara Öztürk
Publikationsdatum: 01.06.2014
Verlag: Springer Berlin Heidelberg
Erschienen in: Clean Technologies and Environmental Policy / Ausgabe 5/2014
Print ISSN: 1618-954X
Elektronische ISSN: 1618-9558
DOI: https://doi.org/10.1007/s10098-013-0673-8

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 5/2014

Biosorption performance, combustion behavior, and leaching characteristics of olive solid waste during the removal of copper and nickel from aqueous solutions

The use of the Canberra metrics to aggregate metrics to sustainability

E-conversation with Professor Mahmoud El-Halwagi

Exergy analysis of the active solar distillation systems integrated with solar ponds

Modeling exposure period for solar disinfection (SODIS) under varying turbidity and cloud cover conditions

Analysis of environmental benefits resulting from use of hydrogen technology in handling operations at airports