nach oben

Journal of Materials Engineering and Performance

Erschienen in:

21.01.2022 | Technical Article

Investigation of the Effects of Deformation Aging Applied to AA 7075 Aluminum Alloy on Mechanical and Metallographic Properties

verfasst von: Yahya Taşgın, Ramazan Ergin

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 6/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Aging is quite important in improving the mechanical properties of aluminum alloys. One of the most widely used Al alloys is AA7075 aluminum alloy. Since AA7075 aluminum alloys contain aluminum-zinc-magnesium-copper, various aging processes have been applied to improve their mechanical qualities, and as a result, they have become commercially available. When this aluminum alloy series with increased strength is subjected to any thermal effect in industrial use, the loss of mechanical properties can be reduced by applying deformation aging. In this study, the effect of deformation aging on the mechanical properties of commercially available aluminum alloy has been determined and the relationship between mechanical properties and microstructure examined. Deformation aging was applied to 7075 Al alloy in our study by cooling in air, water and oil at temperatures of 120–180 °C for 2–24 hours. Structural differences were revealed by examining the effects of heat treatment on the mechanical properties and machinability properties of the alloy. As a result of the study, it was observed that metallographic precipitation occurred in the AA7075 Al alloy, and accordingly, intermetallic phases were formed. It is thought that various nanoscale fine precipitates occurring in the matrix of this alloy can also prevent dislocation movements. The study has positive effects on the mechanical properties of the material.

Vorheriger Artikel Microstructural Configuration and Impact Toughness of Graphite Ductile Iron Reinforced by Trace Amount of TiC-TiB2 Nanoparticles

Nächster Artikel Microstructure Evolution and Properties of In Situ Micro/Nanoscale Mo2C Reinforced Copper Composite Synthesized by Hot-Pressing Consolidation of Mechanical Alloying Powders

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

J. Hirsch, Recent Development in Aluminium for Automotive Applications, Trans. Nonferrous Metals Soc. China, 2014, 24, p 1995–2002. https://doi.org/10.1016/S1003-6326(14)63305-7CrossRef

I. Polmear, D. StJohn, J.-F. Nie, M. Qian, Light Alloys Book, Elsevier Ltd. (2017)

A.D. Isadare, B. Aremo, M.O. Adeoye, O.J. Olawale and ve Shittu M.D., Effect of Heat Treatment on Some Mechanical Properties of 7075 Aluminium Alloy, Mater. Res., 2013, 16(1), p 190–194. https://doi.org/10.1590/S1516-14392012005000167CrossRef

M. Esmailian, M. Shakouri, A. Mottahedi and S.G. ve Shabestari, Effect of T6 and re- Aging Heat Treatment on Mechanical Properties of 7055 Aluminium Alloy, International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical, 2015 Engineering. https://doi.org/10.5281/zenodo.1110057CrossRef

F. Zhang, L.E. Levine, A.J. Allen, C.E. Campbell, A.A. Creuziger, N. Kazantseva and J. ve Ilavsky, In Situ Structural Characterization of Ageing Kinetics in Aluminium Alloy 2024 Across Angstrom-to-Micrometer Length Scales, Acta Mater., 2016, 111, p 385–398. https://doi.org/10.1016/j.actamat.2016.03.058CrossRef

S.K. Panigrahi and R. Jayaganthan, Development of Ultrafine Grained High Strength Age Hardenable Al 7075 Alloy by Cryorolling, Mater Des., 2011, 32, p 3150–3160. https://doi.org/10.1016/j.matdes.2011.02.051CrossRef

J. Park, Influence of Retrogression and Reaging Treatments on the Strength and Stress Corrosion Resistance of Aluminium Alloy 7075–T6, Mater. Sci. Eng. A, 1988, 103, p 223–231. https://doi.org/10.33793/acperproCrossRef

J.-F. Li, Z.-W. Peng, C.-X. Li, Z.-Q. Jia, W.-J. Chen and Z.-Q. Zheng, Mechanical Properties, Corrosion Behaviors and Microstructures of 7075 Aluminium Alloy with Various Aging Treatments, Trans. Nonferrous Metals Soc. China, 2008, 18, p 755–762. https://doi.org/10.1016/S1003-6326(08)60130-2CrossRef

P. Unwin, G. Lorimer and R. Nicholson, The Origin of the Grain Boundary Precipitate Free Zone, Acta Metall., 1969, 17, p 1363–1377. https://doi.org/10.1016/0001-6160(69)90154-0CrossRef

10.

K. Ma, H. Wen, T. Hu, T.D. Topping, D. Isheim, D.N. Seidman et al., Mechanical Behavior and Strengthening Mechanisms in Ultrafine Grain Precipitation-Strengthened Aluminium Alloy, Acta Mater., 2014, 62, p 141–155. https://doi.org/10.1016/j.actamat.2013.09.042CrossRef

11.

X. Xu, J. Zheng, Z. Li, R. Luo and B. Chen, Precipitation in an Al-Zn-Mg-Cu Alloy during Isothermal Aging: Atomic-Scale HAADF-STEM Investigation, Mater. Sci. Eng. A., 2017, 691, p 60–70. https://doi.org/10.1016/j.msea.2017.03.032CrossRef

12.

S. Kai, J.-L. Chen and Z.-M. Yin, TEM Study on Microstructures and Properties of 7050 Aluminum Alloy During Thermal Exposure, Trans. Nonferrous Metals Soc. China, 2009, 19, p 1405–1409. https://doi.org/10.1016/S1003-6326(09)60041-8CrossRef

13.

E. Lee, T. Oppenheim, K. Robinson, B. Aridkahari, N. Neylan, D. Gebreyesus et al., The Effect of Thermal Exposure on the Electrical Conductivity and Static Mechanical Behavior of Several Age Hardenable Aluminium Alloys, Eng. Fail. Anal., 2007, 14, p 1538–1549. https://doi.org/10.1016/j.engfailanal.2006.12.008CrossRef

14.

B. Chen, M.F. Guo, J.X. Zheng, K.Y. Zhang, Y. Fan, L.Y. Zhou et al., The Effect of Thermal Exposure on the Microstructures and Mechanical Properties of 2198 Al–Li Alloy, Adv. Eng. Mater., 2016, 18, p 1225–1233. https://doi.org/10.1016/j.jallcom.2018.01.172CrossRef

15.

R. Ayer, J. Koo, J. Steeds and B. Park, Microanalytical Study of the Heterogeneous Phases in Commercial Al-Zn-Mg-Cu Alloys, Matall. Trans. A, 1985, 16, p 1925–1936. CrossRef

16.

Y. Liu, Z. Zhu, Z. Wang, B. Zhu, Y. Wang and Y. Zhang, Formability and Lubrication of a B-pillarin Hot Stamping with 6061 and 7075 Aluminium Alloy Sheets, Procedia Eng., 2017, 307, p 723–728. https://doi.org/10.1016/j.proeng.2017.10.819CrossRef

17.

Z. Gronostajski, S. Polak, K. Jaskiewicz, P. Kaczynskia, M. Skwarski, W. Chorzepa, K. Sliz and S. Uzar, Properties of B-pillar Made of Aluminium 7075 in Warm Forming Process, Procedia Manuf, 2019 https://doi.org/10.1016/j.promfg.2018.12.050CrossRef

18.

Y.C. Lın, Z. Jin-long, L. Guan and L. Ying-jie, Effects of Pre-Treatments on Aging Precipitates and Corrosion Resistance of a Creep-Aged Al−Zn−Mg−Cu alloy [J], Mater. Des., 2015, 83, p 866–875. https://doi.org/10.1016/j.matdes.2015.06.029CrossRef

19.

M.J. Starınk and WANG S C., A Model for the Yield Strength of Overaged Al−Zn−Mg−Cu alloys [J], Acta Mater., 2003, 51, p 5131–5150. https://doi.org/10.1016/S1359-6454(03)00363-XCrossRef

20.

C.W. Bartges, Changes in Solid Solution Composition as a Function of Artificial Ageing Time for Aluminium Alloy 7075 [J], J. Mater. Sci. Lett., 1994, 13, p 776–778. CrossRef

21.

G.-S. Peng, C. Kang-hua, C. Song-yi and F. Hua-chan, Influence of Dual Retrogression and Re-Aging Condition on Microstructure Strength and Exfoliation Corrosion Behavior of AlZnMgCu Alloy [J], Trans. Nonferrous Metals Soc. China, 2012, 22, p 803–809. https://doi.org/10.1016/S1003-6326(11)61248-XCrossRef

22.

G. Sha and A. Cerezo, Early-Stage Precipitation in Al−Zn−Mg−Cu Alloy (7050) [J], Acta Mater., 2004, 52, p 4503–4516. https://doi.org/10.1016/j.actamat.2004.06.025CrossRef

23.

M. Esmaılıan, M. Shakourı, A. Mottahedı and S.G. Shabestarı, Effect of T6 and Re-Aging Heat Treatment on Mechanical Properties of 7055 Aluminium Alloy [J], 2015 Int. J. Chem. Molecular, Nuclear, Mater. Metallurgical Eng. https://doi.org/10.5281/zenodo.1110057CrossRef

24.

X.-F. Xu, Y.-G. Zhao, M.A. Bing-dong and Z. Ming, Electropulsing Induced Evolution of Grain-Boundary Precipitates without Loss of Strength in the 7075 Al Alloy [J], Mater. Charact., 2015, 105, p 90–94. https://doi.org/10.1016/j.matchar.2015.05.007CrossRef

25.

A. Deschamps and Y. Brechet, Influence of Quench and Heating Rates on the Ageing Response of an Al−Zn−Mg−(Zr) alloy [J], Mater. Sci. Eng., A, 1998, 251, p 200–207. https://doi.org/10.1016/S0921-5093(98)00615-7CrossRef

26.

K.-k Ma, H.-M. Wen, T. Hu, T.D. Toppıng, D. Isheım, D.N. Seıdman, E.J. Lavernıa and J.M. Schoenung, Mechanical Behavior and Strengthening Mechanisms in Ultrafine Grain Precipitation- Strengthened Aluminium Alloy [J], Acta Mater., 2014, 62, p 141–155. https://doi.org/10.1016/j.actamat.2013.09.042CrossRef

27.

M.J. Starınk and X.M. Lı, A Model for the Electrical Conductivity of Peak-Aged and Overaged Al−Zn−Mg−Cu Alloys [J], Metall. and Mater. Trans. A., 2003, 34, p 899–911. CrossRef

28.

B. M. Cına, R Gan, Reducing the Susceptibility of Alloys Particularly Aluminium Alloys to Stress Corrosion Cracking: US Patent, 3856584 [P]. 12−24. (1974)

29.

Y. Reda, R. Abdel-Karım and I. Elmahallawı, Improvements in Mechanical and Stress Corrosion Cracking Properties in Al-Alloy 7075 via Retrogression and Re-Aging [J], Mater. Sci. Eng., A, 2008, 485, p 468–475. https://doi.org/10.1016/j.msea.2007.08.025CrossRef

30.

A.F. Olıveıra Jr., M.C. de Barros, K.R. Cardoso and D.N. Travessa, The Effect of RRA on the Strength and SCC Resistance on AA7050 and AA7150 Aluminium Alloys [J], Mater. Sci. Eng., A, 2004, 379, p 321–326. https://doi.org/10.1016/j.msea.2004.02.05CrossRef

31.

A. Meyveci, I. Karacan, E.H. Firat, U. Caligulu and H. Durmus, Study of Wear of Aged Aluminium Alloys 2XXX and 6XXX within the Manova Statistical Analysis [J], Met. Sci. Heat Treat., 2011, 53, p 173–175. https://doi.org/10.1007/s11041-011-9363-5CrossRef

32.

A. Meyveci, I. Karacan, H. Durmus and U. Caligulu, Artificial Neural Network (ANN) Approach to Hardness Prediction of Aged Aluminium 2024 and 6063 Alloys [J], Materials Testing, 2012, 54, p 36–40. https://doi.org/10.3139/120.110290CrossRef

33.

A. Meyveci, I. Karacan, U. Caligulu and H. Durmus, Pin-On-Disc Characterization of 2XXX and 6XXX Aluminium Alloys Aged by Precipitation Age Hardening [J], J. Alloy. Compd., 2010, 491, p 278–283. https://doi.org/10.1016/j.jallcom.2009.10.142CrossRef

34.

Y. Taşgın, Investigation of Microstructural and Mechanical Properties of Different Titanium Alloys for Gamma Radiation Properties and Implant Applications, J. Mater. Eng. Perform., 2021, 30(8), p 6203–6223. https://doi.org/10.1007/s11665-021-05830-0CrossRef

35.

L.K. Berg, J. Gjonnes, V. Hansen and X.Z. Li, GP-Zones in Al–Zn–Mg Alloys and their Role in Artificial Aging, Acta mater, 2001, 49, p 3443–3451. https://doi.org/10.1109/IBCAST.2019.8667120CrossRef

36.

S. Kılıc, I. Kacar, M. Sahin, F. Özturk and O. Erdem, Effects of Aging Temperature, Time, and Pre-Strain on Mechanical Properties of AA7075, Mater. Res., 2019 https://doi.org/10.1590/1980-5373-MR-2019-0006CrossRef

Titel: Investigation of the Effects of Deformation Aging Applied to AA 7075 Aluminum Alloy on Mechanical and Metallographic Properties
verfasst von: Yahya Taşgın
Ramazan Ergin
Publikationsdatum: 21.01.2022
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 6/2022
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-022-06584-z

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 6/2022

In Situ SEM Investigation of Local Deformation and Failure Behavior of Ti6Al4V under Tensile and Shear Loading

Effect of Initial Microstructure and Strain Rate on the Hot Deformation Behavior of ATI425 Alloy in Two-Phase α/β Region

Phase Transformation-Induced Strain-Rate Dependence Effect in Economical Transformation-Induced Plasticity-Aided Duplex Stainless Steel

Effect of Pre-strain on Microstructure, Texture, and Strengthening of Fully Pearlitic Steel

Wear Behavior of Silicon-Cobalt Composite Coating Deposited on TiAl Alloy by Pack Cementation Process

Microstructure and Microhardness of H13 and Cr8 Die Steels in Control Forging and Cooling Process

Premium Partner

Marktübersichten