Skip to main content
main-content

Zeitschrift

Journal of Coatings Technology and Research

Journal of Coatings Technology and Research 6/2019

Ausgabe 6/2019

Inhaltsverzeichnis ( 27 Artikel )

28.02.2019 | Ausgabe 6/2019

A scalable process for the generation of durable easy-to-clean coatings on foils

Alexander S. Münch, Andrej Stake, Thomas Lukasczyk, Annika Stalling, Tina Fritzsche, Volkmar Stenzel, Petra Uhlmann

10.04.2019 | Ausgabe 6/2019

NIR LEDs and NIR lasers as feasible alternatives to replace oven processes for treatment of thermal-responsive coatings

Christian Schmitz, Bernd Strehmel

22.04.2019 | Ausgabe 6/2019

Antioxidant activity of unmodified kraft and organosolv lignins to be used as sustainable components for polyurethane coatings

Stephanie E. Klein, Jessica Rumpf, Abla Alzagameem, Matthias Rehahn, Margit Schulze

14.05.2019 | Ausgabe 6/2019

Revealing nanoscale chemical heterogeneity at the surface of water-based coatings prepared from urethane–acrylic hybrids by photo-induced force microscopy

Qi Chen, Saskia van der Slot, Sven Kreisig, Mingwen Tian, Ron Peters, Joachim Loos

15.05.2019 | Ausgabe 6/2019

Improvement in corrosion resistance of WE43 magnesium alloy by the electrophoretic formation of a ZnO surface coating

J. E. Qu, M. Ascencio, L. M. Jiang, S. Omanovic, L. X. Yang

31.05.2019 | Ausgabe 6/2019

VIS-optical reflectometry: a method to investigate latex-based coatings

Nicolae Tomozeiu

13.06.2019 | Ausgabe 6/2019

Primary breakup of a non-Newtonian liquid using a high-speed rotary bell atomizer for spray-painting processes

Bo Shen, Qiaoyan Ye, Nico Guettler, Oliver Tiedje, Joachim Domnick

25.07.2019 | Ausgabe 6/2019

Film formation and crosslinking of waterborne two-component coatings containing quaternized ammonium groups

Silfredo Javier Bohorquez, Dirk Mestach

01.10.2019 | Ausgabe 6/2019

UV-stable electrocoats for corrosion protection and structural bonding

Christina Bauder, Ulrich Christ, Nadine Göttl, Rolf Nothhelfer-Richter

02.04.2019 | Ausgabe 6/2019

A computational study of the effect of particle migration on the low-flow limit in slot coating of particle suspensions

Ivan R. Siqueira, Marcio S. Carvalho

10.06.2019 | Ausgabe 6/2019

Concentration profiles in phase-separating photocuring coatings

Hirokazu Yoshihara, Masato Yamamura

15.05.2019 | Ausgabe 6/2019

Rapid processing of perovskite solar cells through pulsed photonic annealing: a review

Amir H. Ghahremani, Blake Martin, Krishnamraju Ankireddy, Thad Druffel

03.06.2019 | Ausgabe 6/2019

Multilayer OLEDs with four slot die-coated layers

Lisa Merklein, Marvin Mink, Dimitrios Kourkoulos, Benjamin Ulber, Sebastian M. Raupp, Klaus Meerholz, Philip Scharfer, Wilhelm Schabel

24.06.2019 | Ausgabe 6/2019

A process model for slot coating of narrow stripes

Ara W. Parsekian, Tae-Joong Jeong, Tequila A. L. Harris

10.07.2019 | Ausgabe 6/2019

Dynamic interferometric imaging of the thickness distribution of evaporating thin liquid films

Jacqueline Stamm, Dominik Daume, Tobias Hartwig, Maximilian Oschmann, Julian Schäfer, Hans Martin Sauer, Edgar Dörsam

10.07.2019 | Ausgabe 6/2019

Printing process and characterization of fully pad printed electroluminescent panels on curved surfaces

Christina Bodenstein, Hans Martin Sauer, Katrin Hirmer, Edgar Dörsam

06.08.2019 | Ausgabe 6/2019

Discrete element method to predict the mechanical properties of pigmented coatings

Dan Varney, Martti Toivakka, Doug Bousfield

08.10.2019 | Ausgabe 6/2019

Combined effect of relative humidity and substrate temperature on evaporation of methanol droplet

Sahar Andalib, Ali Alshehri, Pirouz Kavehpour

12.09.2019 | Ausgabe 6/2019

Near-IR sintering of conductive silver nanoparticle ink with in situ resistance measurement

David J. Keller, Krystopher S. Jochem, Wieslaw J. Suszynski, Lorraine F. Francis

30.08.2019 | Ausgabe 6/2019

Robust superamphiphobic aluminum surfaces: fabrication and investigation

Z. E. Zhao, S. H. Sun, Y. M. Hu, Y. Zhu

16.07.2019 | Ausgabe 6/2019

Synthesis and properties of SrSn(OH)6 nanorods and their flame retardancy and smoke suppression effects on epoxy resin

Danqi Yang, Chong Zhang, Luming Dong, Xudong Hou, Weikang Zheng, Jianzhong Xu, Haiyun Ma

21.06.2019 | Ausgabe 6/2019

Synthesis of rubber seed oil waterborne alkyd resin from glucitol

C. F. Uzoh, M. C. Obele, U. M. Umennabuife, O. D. Onukwuli

12.09.2019 | Ausgabe 6/2019

Development of functionalized SiO2–TiO2 reinforced cardanol and caprolactam modified diamine based polybenzoxazine nanocomposites for high performance applications

T. Lakshmikandhan, Arumugam Hariharan, K. Sethuraman, Muthukaruppan Alagar

21.06.2019 | Ausgabe 6/2019

Effects of surface pretreatment and deposition conditions on the gas permeation properties and flexibility of Al2O3 films on polymer substrates by atomic layer deposition

Dung-Yue Su, Yueh-Hua Kuo, Ming-Hung Tseng, Feng-Yu Tsai

24.06.2019 | Ausgabe 6/2019

Preparation and characterization of electrically conductive multiwalled carbon nanotube/polyoxazoline nanocomposite films using spray coating

Faruk Oytun, Umut Ugur Ozkose

03.07.2019 | Ausgabe 6/2019

Preparation of castor oil-based fatliquoring agent via a Pickering emulsion method for use in leather coating

Azam Sardari, Ali Asghar Sabbagh Alvani, Seyed Reza Ghaffarian

10.10.2019 | Brief Communication | Ausgabe 6/2019

Performance enhancement of large-area graphene–polymer flexible transparent conductive films fabricated by ultrasonic substrate vibration-assisted rod coating

Zhe Li, Xinyu Zhang, Long Shen, Zhijun Fan, Xuewen Chen, Min Chen, Shaohua Qiu, Fatemeh Zabihi, Morteza Eslamian, Qianli Chen

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise