Ausgabe 21/2022
Special Issue: Metal Additive Manufacturing; Edited by Jörg Jinschek, Sophie Primig, and Gwénaëlle Proust
Inhalt (22 Artikel)
Preface to the special issue: microstructure design in metal additive manufacturing—physical metallurgy revisited
Jörg Jinschek, Sophie Primig, Gwénaëlle Proust
Broadening the design space of engineering materials through “additive grain boundary engineering”
Matteo Seita, Shubo Gao
Metal fused filament fabrication of the nickel-base superalloy IN 718
Yvonne Thompson, Kai Zissel, Andreas Förner, Joamin Gonzalez-Gutierrez, Christian Kukla, Steffen Neumeier, Peter Felfer
Wire laser metal deposition of 22% Cr duplex stainless steel: as-deposited and heat-treated microstructure and mechanical properties
Amir Baghdadchi, Vahid A. Hosseini, Maria Asuncion Valiente Bermejo, Björn Axelsson, Ebrahim Harati, Mats Högström, Leif Karlsson
Recrystallization in non-conventional microstructures of 316L stainless steel produced via laser powder-bed fusion: effect of particle coarsening kinetics
F. C. Pinto, L. S. Aota, I. R. Souza Filho, D. Raabe, H. R. Z. Sandim
On the anisotropy in room-temperature mechanical properties of laser powder bed fusion processed Ti6Al4V-ELI alloy for aerospace applications
P. Manikandan, V. Anil Kumar, P. I. Pradeep, R. Vivek, Sushant K. Manwatkar, G. Sudarshan Rao, S. V. S. Narayana Murty, D. Sivakumar, P. Ramesh Narayanan
Fatigue properties of selective laser melted Ti-6Al-4V alloy subjected to laser shock processing
Ruyi Xin, Liang Lan, Chengyan Bai, Shuang Gao, Bo He, Jiang Wang
Microstructure, mechanical properties, and crack formation of aluminum alloy 6063 produced via laser powder bed fusion
Feng Li, Taomei Zhang, Yiyou Wu, Chao Chen, Kechao Zhou
Microstructure and mechanical behaviour of 316L stainless steel produced using sinter-based extrusion additive manufacturing
Ricardo Santamaria, Mobin Salasi, Sam Bakhtiari, Garry Leadbeater, Mariano Iannuzzi, Md Zakaria Quadir
In situ microstructure analysis of Inconel 625 during laser powder bed fusion
Felix Schmeiser, Erwin Krohmer, Christian Wagner, Norbert Schell, Eckart Uhlmann, Walter Reimers
Advanced structural analysis of a laser additive manufactured Zr-based bulk metallic glass along the build height
James P. Best, Keita Nomoto, Fan Yang, Bosong Li, Moritz Stolpe, Luyang Zeng, Zach Evenson, Christoph Hugenschmidt, Xiaopeng Li, Simon P. Ringer, Jamie J. Kruzic
ICME framework to simulate microstructure evolution during laser powder bed fusion of Haynes 282 nickel-based superalloy
V. S. Hariharan, S. Pramod, D. Kesavan, B. S. Murty, Gandham Phanikumar
Texture evolution in a CrMnFeCoNi high-entropy alloy manufactured by laser powder bed fusion
X. Y. He, H. Wang, Z. G. Zhu, L. Z. Wang, J. Q. Liu, N. Haghdadi, S. M. L. Nai, J. Huang, S. Primig, S. P. Ringer, X. Z. Liao
Hot isostatic pressing of laser powder bed fusion AlSi10Mg: parameter identification and mechanical properties
Juan Guillermo Santos Macías, Lv Zhao, David Tingaud, Brigitte Bacroix, Grzegorz Pyka, Camille van der Rest, Laurence Ryelandt, Aude Simar
Effect of microstructure on fatigue crack propagation in additive manufactured nickel-based superalloy Haynes 282: an experiment and crystal plasticity study
Jiahao Cheng, Patxi Fernandez-Zelaia, Xiaohua Hu, Michael Kirka
Review: additive manufacturing of pure tungsten and tungsten-based alloys
Peter Morcos, Alaa Elwany, Ibrahim Karaman, Raymundo Arróyave
The effect of a remelting treatment scanning strategy on the surface morphology, defect reduction mechanism, and mechanical properties of a selective laser-melted Al-based alloy
Jieren Guan, Qiuping Wang
A critical review on the effects of process-induced porosity on the mechanical properties of alloys fabricated by laser powder bed fusion
Wen Hao Kan, Louis Ngai Sam Chiu, Chao Voon Samuel Lim, Yuman Zhu, Yang Tian, Derui Jiang, Aijun Huang
Fatigue crack growth resistance of a mesoscale composite microstructure Haynes 282 fabricated via electron beam melting additive manufacturing
Patxi Fernandez-Zelaia, Julio Ortega Rojas, James Ferguson, Sebastien Dryepondt, Michael M. Kirka
Boundary characterization using 3D mapping of geometrically necessary dislocations in AM Ta microstructure
Wyatt A. Witzen, Andrew T. Polonsky, Paul F. Rottmann, Kira M. Pusch, McLean P. Echlin, Tresa M. Pollock, Irene J. Beyerlein
Review: Multi-principal element alloys by additive manufacturing
Chenze Li, Michael Ferry, Jamie J. Kruzic, Xiaopeng Li