Skip to main content
main-content

Zeitschrift

Journal of Mechanical Science and Technology

Journal of Mechanical Science and Technology 2/2020

Ausgabe 2/2020

Inhaltsverzeichnis ( 43 Artikel )

01.02.2020 | Original Article | Ausgabe 2/2020

Simple vibration model for the design of a vertical axis wind turbine

Hyung Hee Kim, Yutaek Oh, Hong Hee Yoo

01.02.2020 | Original Article | Ausgabe 2/2020

Research on effect of rings on coupling vibration in a rigid-disk rotor

Yi-Jui Chiu, Xiao-Yun Li, Guo-Fei Yu, Chia-Hao Yang, Jeng-Shyang Pan, Chin-Ling Chen

01.02.2020 | Original Article | Ausgabe 2/2020

Ultrasonic fingerprint sensor in underglass prototype using impedance mismatching

Won Young Choi, Ki Chang Kang, Kwan Kyu Park

01.02.2020 | Original Article | Ausgabe 2/2020

Stick-slip vibration of a moving oscillator on an axially flexible beam

Jun-gi Hong, Jaewon Kim, Jintai Chung

01.02.2020 | Original Article | Ausgabe 2/2020

Design, development and modelling of single actuated, compliant and symmetrical multi link hopping mechanism

Hongkuan Lin, Ayse Tekes, Coskun Tekes

01.02.2020 | Original Article | Ausgabe 2/2020

Dynamic behavior of the spur gear system with time varying stiffness by gear positions in the backlash

Chan Il Park

01.02.2020 | Original Article | Ausgabe 2/2020

Fractional envelope to enhance spectral features of rolling element bearing faults

Ankush C. Jahagirdar, Karunesh Kumar Gupta

01.02.2020 | Original Article | Ausgabe 2/2020

Effect of flow on a dual Helmholtz resonator

Hyunsu Kim, Ahmet Selamet

01.02.2020 | Original Article | Ausgabe 2/2020

A semi-analytical method of time-varying mesh stiffness in concentric face gear split-torque transmission system

Jianxiong Dong, Jinyuan Tang, Zehua Hu, Yi Wang

01.02.2020 | Original Article | Ausgabe 2/2020

Response of large mistuned bladed disk assembly subjected to random excitations

Douksoon Cha

01.02.2020 | Original Article | Ausgabe 2/2020

Modeling identification and control of a 6-DOF active vibration isolation system driving by voice coil motors with a Halbach array magnet

Dawei Jiang, Jiasheng Li, Xingzhan Li, Chaodong Deng, Pinkuan Liu

01.02.2020 | Original Article | Ausgabe 2/2020

Influence of relative difference between paired guide rails on motion accuracy in closed hydrostatic guideways

Chenchun Shi, Zhenzhong Wang, Yunfeng Peng

01.02.2020 | Original Article | Ausgabe 2/2020

Advanced lagged slip ratio for stable analysis of wheel dynamics at low-speed and high-speed

Tae-Yun Kim, Samuel Jung, Wan-Suk Yoo

01.02.2020 | Original Article | Ausgabe 2/2020

Numerical analyses of the coupled-dynamic behavior of droplets on a vibrating membrane with a microsphere array at a three-phase interface

Dong-Su Park, Kyoung-Su Park

01.02.2020 | Original Article | Ausgabe 2/2020

Experimental and numerical analysis on the equilibrium shape of sessile droplets on elastic thin membranes

Hyeon-Gi Ryu, Kyoung-Su Park

01.02.2020 | Original Article | Ausgabe 2/2020

Mechanism for mitigating filler-induced reliability degradation in semiconductor devices assembled utilizing an LOC package technique

Seong-Min Lee, Yeon-Wook Kim

01.02.2020 | Original Article | Ausgabe 2/2020

Design and analysis of sealed suspension module based on solid expandable tubular repair technology

Xiaohua Zhu, Feilong Cheng, Changshuai Shi, Jia’nan Li, Kailin Chen

01.02.2020 | Original Article | Ausgabe 2/2020

Polishing surface integrity of TC17 aeroengine blades

De Liu, Yaoyao Shi, Xiaojun Lin, Chao Xian, Zhiyang Gu

01.02.2020 | Original Article | Ausgabe 2/2020

Effect of deposition orientations on dimensional and mechanical properties of the thin-walled structure fabricated by tungsten inert gas (TIG) welding-based additive manufacturing process

Nitish P. Gokhale, Prateek Kala, Varun Sharma, Murali Palla

01.02.2020 | Original Article | Ausgabe 2/2020

Effect of Al element in Zn-Al fillers on the corrosion resistance of Cu/Al brazed joints

Junlan Huang, Weimin Long, Sujuan Zhong

01.02.2020 | Original Article | Ausgabe 2/2020

Noise reduction of refrigerant two-phase flow using flow conditioners near the electric expansion valve

Gangjune Kim, Simon Song

01.02.2020 | Original Article | Ausgabe 2/2020

Assessment of two-parameter mixed models for large eddy simulations of transitional and turbulent flows

Young Mo Lee, Hyeon Gyu Hwang, Jae Hwa Lee, Jungil Lee, Jae Sung Park

01.02.2020 | Original Article | Ausgabe 2/2020

Numerical investigation of turbulent cavitating flow in an axial flow pump using a new transport-based model

Hong Feng, Yu Wan, Zhang Fan

01.02.2020 | Original Article | Ausgabe 2/2020

Effect of fiber orientation on interfacial fracture toughness for adhesively bonded composite plates

Ilkay Ertugrul Bican, Mete Onur Kaman, Serkan Erdem

01.02.2020 | Original Article | Ausgabe 2/2020

Analysis of component damage probability of a small engine based on penetration experiments and M & S

Hyung Chul Kim, Kang Park, Myung Hoon Nam, Woo Sung Park

01.02.2020 | Original Article | Ausgabe 2/2020

A modified elastic contact stiffness model considering the deformation of bulk substrate

Ling Li, Jingjing Wang, Xiyong Pei, Wei Chu, Anjiang Cai

01.02.2020 | Original Article | Ausgabe 2/2020

Gas-liquid two-phase flow in the axial clearance of liquid-ring pumps

Renhui Zhang, Lei Tian, Guangqiang Guo, Xuebing Chen

01.02.2020 | Original Article | Ausgabe 2/2020

Oscillation dynamics of colloidal particles caused by surfactant in an evaporating droplet

Hae Won Seo, Narian Jung, Chun Sang Yoo

01.02.2020 | Original Article | Ausgabe 2/2020

A novel model for high-speed angular contact ball bearing by considering variable contact angles

Jin-hua Zhang, Bin Fang, Ke Yan, Jun Hong

01.02.2020 | Original Article | Ausgabe 2/2020

The influence of end mill helix angle on high performance milling process

Marcin Plodzien, Jan Burek, Lukasz Zylka, Pawel Sulkowicz

01.02.2020 | Original Article | Ausgabe 2/2020

A solution-region approach for synthesis linkages with coincident instantaneous center and one fixed pivot

Lairong Yin, Lei Tian, Long Huang, Juan Huang, Dang Zhou, Anwei Jiang

01.02.2020 | Original Article | Ausgabe 2/2020

Design optimization of a 2-DOF parallel kinematic machine based on natural frequency

S. Shankar Ganesh, A. B. Koteswara Rao

01.02.2020 | Original Article | Ausgabe 2/2020

A novel approach for the rigid body guidance synthesis of planar RRPR linkages

Selma J. Rodríguez-González, Henry A. Suárez-Velásquez, J. Jesús Cervantes-Sánchez, José M. Rico-Martínez

01.02.2020 | Original Article | Ausgabe 2/2020

Neural network adaptive position tracking control of underactuated autonomous surface vehicle

Chengju Zhang, Cong Wang, Yingjie Wei, Jinqiang Wang

01.02.2020 | Original Article | Ausgabe 2/2020

A composite control design for suppressing mutual interference of interconnected systems

Soumayya Chakir, JinHo Suh, SangWon Ji, YoungBok Kim

01.02.2020 | Original Article | Ausgabe 2/2020

Affordance-based modeling of a human-robot cooperative system for area exploration

Jeongsik Kim, Jungmok Ma, Namhun Kim

01.02.2020 | Original Article | Ausgabe 2/2020

Measurement and modeling of crank train friction in light-duty diesel engines

Seokhwon Lee, Jongdae Kang, Sungwook Park

01.02.2020 | Original Article | Ausgabe 2/2020

A study on the variation of the performance and the cost of power generation in a combined heat and power plant with the change of the user facility’s return temperature

Jongjun Lee, Kyung Min Kim, Shinyoung Im, Sang Ho Shin, Won Seok Chang, Mun Sei Oh

01.02.2020 | Original Article | Ausgabe 2/2020

Detailed assessment of mesh sensitivity for CFD simulation of coal combustion in a tangential-firing boiler

Hyunbin Jo, Kiseop Kang, Jongkeun Park, Changkook Ryu, Hyunsoo Ahn, Younggun Go

01.02.2020 | Original Article | Ausgabe 2/2020

Characterization of engine oil additive packages on diesel particulate emissions

Kangjin Kim, Woosung Si, Dongyoung Jin, Jeong-Hwan Kim, Jaeho Cho, Sungha Baek, Cha-Lee Myung, Simsoo Park

01.02.2020 | Ausgabe 2/2020

Performance simulation of membrane heat pumps based on vacuum membrane dehumidification system

Hyunjeong Lim, Jinwook Lee, Sangmi Choi, Soyeon Kim, Minkyu Jung, Jihun Lim, Minsung Kim

01.02.2020 | Original Article | Ausgabe 2/2020

Arrangement of side holes in a double J stent for high urine flow in a stented ureter

Kyung-Wuk Kim, Hyoung-Ho Kim, Young Ho Choi, Seung Bae Lee, Yasutaka Baba, Sang-Ho Suh

01.02.2020 | Original Article | Ausgabe 2/2020

Spatio temporal parameters and symmetry in subjects ascending and descending a ramp, using three different prosthetic feet

M. Riveras, E. Ravera, A. F. Shaheen, D. Ewins, Paola Catalfamo-Formento

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise