nach oben

Erschienen in:

2008 | OriginalPaper | Buchkapitel

33. High Rates and Impact Experiments

verfasst von : Kaliat T. Ramesh, Prof.

Erschienen in: Springer Handbook of Experimental Solid Mechanics

Verlag: Springer US

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Experimental techniques for high-strain-rate measurements and for the study of impact-related problems are described. An approach to classifying these experimental techniques is presented, and the state-of-the-art is briefly described. An in-depth description of the basis for high-strain-rate experiments is presented, with an emphasis on the development of a range of strain rates and a range of stress states. The issues associated with testing metals, ceramics and soft materials are reviewed. Next, experimental techniques that focus on studying the propagation of waves are considered, including plate impact and shock experiments. Experiments that focus on the development of dynamic failure processes are separately reviewed, including experiments for studying spallation and dynamic fracture.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Implantable Biomedical Devices and Biologically Inspired Materials

Nächstes Kapitel Delamination Mechanics

33.1.

J.E. Field, W.G. Proud, S.M. Walley, H.T. Goldrein: Review of experimental techniques for high rate deformation and shock studies. In: New Experimental Methods in Material Dynamics and Impact, ed. by W.K. Nowacki, J.R. Klepaczko (Institute of Fundamental Technological Research, Warsaw 2001) p. 109

33.2.

C.S. Coffey, V.F. DeVost: Drop weight impact machines: a review of recent progress, JANNAF Propulsion Systems Hazards Subcommittee Meeting CPIA Publ., 1(446), 527–531 (1986)

33.3.

J.D. Winkel, D.F. Adams: Instrumented drop weight impact testing of cross-ply and fabric composites, Composites 16(4), 268–278 (1985)

33.4.

N. Banthia, S. Mindess, A. Bentur, M. Pigeon: Impact testing of concrete using a drop-weight impact machine, Exp. Mech. 29(1), 63–69 (1989)

33.5.

P.R. Sreenivasan, S.K. Ray, S.L. Mannan, P. Rodriguez: Determination of K(Id) at or below NDTT using instrumented drop-weight testing, Int. J. Fract. 55(3), 273–283 (1992)

33.6.

C.S. Coffey, V.F. Devost: Impact testing of explosives and propellants, Propellants Explosives Pyrotechnics 20(3), 105–115 (1995)

33.7.

H.M. Hsiao, I.M. Daniel, R.D. Cordes: Dynamic compressive behavior of thick composite materials, Exp. Mech. 38(3), 172–180 (1998)

33.8.

T. Nicholas, A.M. Rajendran: Material characterization at high strain-rates. In: High Velocity Impact Dynamics, ed. by J.A. Zukas (Wiley, New York 1990) pp. 127–296

33.9.

S.M. Walley, J.E. Field: Strain rate sensitivity of polymers in compression from low to high strain rates, DYMAT J. 1, 211–228 (1994)

33.10.

G. Ravichandran, G. Subhash: A micromechanical model for high strain rate behavior of ceramics, Int. J. Sol. Struct. 32, 2627–2646 (1995)MATH

33.11.

D. Jia, K.T. Ramesh, E. Ma: Effects of nanocrystalline and ultrafine grain sizes on constitutive behavior and shear bands in iron, Acta Mater. 51(12), 3495–3509 (2003)

33.12.

H. Kolsky: An investigation of the mechanical properties of materials at very high rates of loading, Proceedings of the Physical Society, Vol. 62B (London, 1949) p. 676

33.13.

G.T. Gray III: Classic split-Hopkinson pressure bar testing. In: ASM Handbook, Vol. 8, ed. by H. Kuhn, D. Medlin (ASM Int., Materials Park Ohio 2000) pp. 462–476

33.14.

K.T. Ramesh, S. Narasimhan: Finite deformations and the dynamic measurement of radial strains in compression Kolsky bar experiments, Int. J. Sol. Struct. 33(20), 3723–3738 (1996)

33.15.

T.S. Lok, X.B. Li, D. Liu, P.J. Zhao: Testing and response of large diameter brittle materials subjected to high strain rate, J. Mat. Civil Eng. 14(3), 262–269 (2002)

33.16.

D. Jia, K.T. Ramesh: A rigorous assessment of the benefits of miniaturization in the Kolsky bar system, Exp. Mech. 44(5), 445–454 (2004)

33.17.

E.D.H. Davies, S.C. Hunter: The dynamic compression testing of solids by the method of the split Hopkinson pressure bar (SHPB), J. Mech. Phys. Solids 11, 155–179 (1963)

33.18.

J.F. Bell: An experimental diffraction grating study of the quasi-static hypothesis of the SHPB experiment, J. Mech. Phys. Solids 14, 309–327 (1966)

33.19.

L.D. Bertholf, C.H. Karnes: Two dimensional analysis of the split Hopkinson pressure bar system, J. Mech. Phys. Solids 23, 1–19 (1975)

33.20.

ASTM: ASTM Standard E9 3.01 102: Standard test method of compression testing of metallic materials at room temperature (ASTM International, West Conshohocken 1999)

33.21.

F. Wang, J.G. Lenard: An experimental study of interfacial friction-hot ring compression, Trans. ASME: J. Eng. Mater. Technol. 114, 13–18 (1992)

33.22.

R. Skalak: Longitudinal impact of a semi-infinite circular elastic bar, J. Appl. Mech. 24, 59–64 (1957)MATHMathSciNet

33.23.

D.J. Frew, M.J. Forrestal, W. Chen: Pulse shaping techniques for testing brittle materials with a split Hopkinson pressure bar, Exper. Mech. 42, 93–106 (2002)

33.24.

D.A. Gorham: Specimen inertia in high strain-rate compression, J. Phys. D 22, 1888–1893 (1989)

33.25.

J.Z. Malinowski, J.R. Klepaczko: A unified analytic and numerical approach to specimen behaviour in the SHPB, Int. J. Mech. Sci. 28, 381–391 (1986)

33.26.

G. Subhash, G. Ravichandran: Split-Hopkinson bar testing of ceramics. In: ASM Handbook, Vol. 8, ed. by H. Kuhn, D. Medlin (ASM Int., Materials Park Ohio 2000) pp. 497–504

33.27.

H. Wang, K.T. Ramesh: Dynamic strength and fragmentation of hot-pressed silicon carbide under uniaxial compression, Acta mater. 52(2), 355–367 (2004)

33.28.

G. Subhash, G. Ravichandran: Mechanical behaviour of a hot pressed aluminum nitride under uniaxial compression, J. Mater. Sci. 33, 1933–1939 (1998)

33.29.

G. Ravichandran, G. Subhash: Critical appraisal of limiting strain rates for compression testing of ceramics in a split Hopkinson pressure bar, J. Amer. Ceram. Soc. 77, 263–267 (1994)

33.30.

W. Chen, G. Subhash, G. Ravichandran: Evaluation of ceramic specimen geometries used in split Hopkinson pressure bar, DYMAT J. 1, 193–210 (1994)

33.31.

W. Chen, F. Lu, D.J. Frew, M.J. Forrestal: Dynamic compression testing of soft materials, Trans. ASME: J. Appl. Mech. 69, 214–223 (2002)MATH

33.32.

G.T. Gray III, W.R. Blumenthal: Split-Hopkinson pressure bar testing of soft materials. In: ASM Handbook, Vol. 8, ed. by H. Kuhn, D. Medlin (ASM Int., Materials Park Ohio 2000) pp. 462–476

33.33.

C.R. Siviour, S.M. Walley, W.G. Proud, J.E. Field: Are low impedance Hopkinson bars necessary for stress equilibrium in soft materials?. In: New Experimental Methods in Material Dynamics and Impact, ed. by W.K. Nowacki, J.R. Klepaczko (Inst. Fund. Technol. Res., Warsaw 2001) pp. 421–427

33.34.

W. Chen, F. Lu, B. Zhou: A quartz-crystal-embedded split Hopkinson pressure bar for soft materials, Exper. Mech. 40, 1–6 (2000)MATH

33.35.

D.T. Casem, W. Fourney, P. Chang: Wave separation in viscoelastic pressure bars using single-point measurements of strain and velocity, Polymer Testing 22, 155–164 (2003)

33.36.

J.L. Chiddister, L.E. Malvern: Compression-impact testing of aluminum at elevated temperatures, Exper. Mech. 3, 81–90 (1963)

33.37.

Z. Rosenberg, D. Dawicke, E. Strader, S.J. Bless: A new technique for heating specimens in Split-Hopkinson-bar experiments using induction coil heaters, Exper. Mech. 26, 275–278 (1986)

33.38.

A. Gilat, X. Wu: Elevated temperature testing with the torsional split Hopkinson bar, Exper. Mech. 34, 166–170 (1994)

33.39.

A.M. Lennon, K.T. Ramesh: A technique for meas-uring the dynamic behavior of materials at high temperatures, Int. J. Plast. 14(12), 1279–1292 (1998)

33.40.

S. Nemat-Nasser, J.B. Isaacs: Direct Measurement of Isothermal Flow Stress of Metals at Elevated Temperature and High Strain Rates with Application to Ta and Ta-W Alloys, Acta Mater. 45(3), 907–919 (1997)

33.41.

D. Basak, H.W. Yoon, R. Rhorer, T.J. Burns, T. Matsumoto: Temperature control of pulse heated specimens in a Kolsky bar apparatus using microsecond time-resolved pyrometry, Int. J. Thermophys. 25(2), 561–574 (2004)

33.42.

J. Harding, E.O. Wood, J.D. Campbell: Tensile testing of materials at impact rates of strain, J. Mech. Engng Sci. 2, 88–96 (1960)

33.43.

S. Nemat-Nasser, J.B. Isaacs, J.E. Starrett: Hopkinson techniques for dynamic recovery experiments, Proc. Royal Soc. London A20, 371–391 (1991)

33.44.

G.H. Staab, A. Gilat: A direct-tension split Hopkinson bar for high strain-rate testing, Exp. Mech. 31(3), 232–235 (1991)

33.45.

Y. Li, K.T. Ramesh, E.S.C. Chin: Comparison of the plastic deformation and failure of A359/SiC and 6061-T6/Al2O3 metal matrix composites under dynamic tension, Mat. Sci. Eng. A 371(1-2), 359–370 (2004)

33.46.

W.E. Baker, C.H. Yew: Strain-rate effects in the propagation of torsional plastic waves, Trans. ASME: J. Appl. Mech. 33, 917–923 (1966)

33.47.

K.A. Hartley, J. Duffy, R.H. Hawley: The torsional Kolsky (split-Hopkinson) bar. In: ASM Handbook, Vol. 8, ed. by H. Kuhn, D. Medlin (ASM Int., Materials Park Ohio 2000) pp. 218–228

33.48.

A. Marchand, J. Duffy: An experimental study of the formation process of adiabatic shear bands in a structural steel, J. Mech. Phys. Solids. 36(3), 251–283 (1988)

33.49.

C.K.H. Dharan, F.E. Hauser: Determination of stress-strain characteristics at very high strain rates, Exper. Mech. 10, 370–376 (1970)

33.50.

G.L. Wulf, G.T. Richardson: The measurement of dynamic stress-strain relationships at very high strain rates, J. Phys. E 7, 167–169 (1974)

33.51.

D.A. Gorham: Measurement of stress-strain properties of strong metals at very high strain rates, Inst. Phys. Conf. Ser. 47, 16–24 (1980)

33.52.

N.A. Safford: Materials testing up to 10⁵ s ⁻¹ using a miniaturised hopkinson bar with dispersion corrections, Proc. 2nd Intl. Symp. on Intense Dynamic Loading and its Effects, ed. by G. Zhang, S. Huang (Sichuan Univ. Press, Chengdu 1992) pp. 378–383

33.53.

D.A. Gorham, P.H. Pope, J.E. Field: An improved method for compressive stress-strain measurements at very high strain rates, Proc. R. Soc. Lond. A 438, 153–170 (1992)MATH

33.54.

J. Shioiri, K. Sakino, S. Santoh: Strain rate sensitivity of flow stress at very high rates of strain. In: Constitutive Relation in High/Very-High Strain Rates, ed. by K. Kawata, J. Shioiri (Springer, Berlin Heidelberg 1995) pp. 49–58

33.55.

F. Kamler, P. Niessen, R.J. Pick: Measurement of the behaviour of high-purity copper at very high rates of strain, Canad. J. Phys. 73, 295–303 (1995)

33.56.

R.W. Klopp, R.J. Clifton: Pressure-shear plate impact testing. In: ASM Handbook, Vol. 8, ed. by H. Kuhn, D. Medlin (ASM Int., Materials Park Ohio 1985) pp. 230–239

33.57.

K.J. Frutschy, R.J. Clifton: High-temperature pressure-shear plate impact experiments on OFHC copper, J. Mech. Phys. Sol. 46(10), 1723–1743 (1998)

33.58.

K.T. Ramesh, N. Kelkar: Technique for the continuous measurement of projectile velocities in plate impact experiments, Rev. Sci. Instrum. 66(4), 3034–3036 (1995)

33.59.

S. Yadav, D.R. Chichili, K.T. Ramesh: The mechanical response of a 6061-T6 Al/Al₂O₃ metal matrix composite at high rates of deformation, Acta metall. mater. 43(12), 4453–4464 (1995)

33.60.

D. Jia, A.M. Lennon, K.T. Ramesh: High-strain-rate pressure-shear recovery: a new experimental technique, Int. J. Sol. Struc. 37(12), 1679–1699 (2000)MATH

33.61.

A. Bekker, J.C. Jimenez-Victory, P. Popov, D.C. Lagoudas: Impact induced propagation of phase transformation in a shape memory alloy rod, Int. J. Plast. 18, 1447–1479 (2002)MATH

33.62.

J.U. Cazamias, W.D. Reinhart, C.H. Konrad, L.C. Chhabildas, S.J. Bless: Bar impact tests on alumina (AD995). In: Shock Compression of Condensed Matter - 2001, ed. by M.D. Furnish, N.N. Thadhani, Y. Horie (Am. Inst. Phys., Melville 2002) pp. 787–790

33.63.

L.C. Chhabildas, M.D. Furnish, W.D. Reinhart, D.E. Grady: Impact of AD995 alumina rods. In: Shock Compression of Condensed Matter - 1997, ed. by S.C. Schmidt, D.P. Dandekar, J.W. Forbes (Am. Inst. Phys., Woodbury 1998) pp. 505–508

33.64.

F.G. Díaz-Rubio, J. Rodríguez Pérez, V. Sánchez Gálvez: The spalling of long bars as a reliable method of measuring the dynamic tensile strength of ceramics, Int. J. Impact Eng. 27, 161–177 (2002)

33.65.

K.G. Holland, L.C. Chhabildas, W.D. Reinhart, M.D. Furnish: Experiments on CERCOM SiC rods under impact. In: Shock Compression of Condensed Matter - 1999, ed. by M.D. Furnish, L.C. Chhabildas, R.S. Hixson (Am. Inst. Phys., Melville 2000) pp. 585–588

33.66.

R. Russell, S.J. Bless, T. Beno: Impact induced failure zones in Homalite bars:. In: Shock Compression of Condensed Matter - 2001, ed. by M.D. Furnish, N.N. Thadhani, Y. Horie (Am. Inst. Phys., Melville 2002) pp. 811–814

33.67.

D.S. Drumheller: Introduction to Wave Propagation in Nonlinear Fluids and Solids (Cambridge Univ. Press, Cambridge 1998)

33.68.

M.A. Meyers: Dynamic Behavior of Materials (Wiley, New York 1994)MATH

33.69.

G.T. Gray III: Shock wave testing of ductile materials. In: ASM Handbook, Vol. 8, ed. by H. Kuhn, D. Medlin (ASM Int., Materials Park Ohio 2000) pp. 462–476

33.70.

S.C. Schmidt, J.N. Johnson, L.W. Davidson: Shock Compression of Condensed Matter - 1989 (North Holland, Amsterdam 1990)

33.71.

S.C. Schmidt, R.D. Dick, J.W. Forbes, D.G. Tasker (Eds.): Shock Compression of Condensed Matter - 1991 (Elsevier, Amsterdam 1992)

33.72.

S.C. Schmidt, W.C. Tao: Shock Compression of Condensed Matter - 1995 (Am. Inst. Phys., Woodbury 1996)

33.73.

S.C.D.P. Schmidt Dandekar, J.W. Forbes: Shock Compression of Condensed Matter - 1997 (Am. Inst. Phys., Woodbury 1998)

33.74.

M.D. Furnish, L.C. Chhabildas, R.S. Hixson: Shock Compression of Condensed Matter - 1999 (Am. Inst. Phys., Melville 2000)

33.75.

L. Davison, R.A. Graham: Shock compression of solids, Phys. Rep. 55, 255–379 (1979)

33.76.

J.R. Asay, M. Shahinpoor: High-Pressure Shock Compression of Solids (Springer-Verlag, New York 1993)MATH

33.77.

L. Davison, D.E. Grady, M. Shahinpoor: High-Pressure Shock Compression of Solids II: Dynamic Fracture and Fragmentation (Springer, New York 1996)MATH

33.78.

L. Davison, Y. Horie, M. Shahinpoor: High-Pressure Shock Compression of Solids IV: Response of Highly Porous Solids to Shock Compression (Springer, New York 1997)

33.79.

L. Davison, M. Shahinpoor: High-Pressure Shock Compression of Solids III (Springer, New York 1998)

33.80.

J.A. Zukas (Ed.): High Velocity Impact Dynamics (Wiley, New York 1990)

33.81.

M.F. Gogulya, A.Y. Dolgoborodov, M.A. Brazhnikov: Investigation of shock and detonation waves by optical pyrometry, Int. J. Imp. Eng. 23(1), 283–293 (1999)

33.82.

G.I. Pangilinan, Y.M. Gupta: Time-resolved raman measurements in nitromethane shocked to 140 Kbar, J. Phys. Chem. 98(13), 4522–4529 (1994)

33.83.

W.D. Reinhart, L.C. Chhabildas, D.E. Carroll, T.K. Bergstresser, T.F. Thornhill, N.A. Winfree: Equation of state measurements of materials using a three-stage gun to impact velocities of 11 km/s, Int. J. Imp. Eng. 26(1-10), 625–637 (2001)

33.84.

Y.M. Gupta: Use of piezoresistance gauges to quantify the stress state in a shocked solid. In: Experimental Techniques in the Dynamics of Deformable Solids, ed. by K.T. Ramesh (ASME, New York 1993) pp. 89–101

33.85.

R. Feng, G.F. Raiser, Y.M. Gupta: Material strength and inelastic deformation of silicon carbide under shock wave compression, J. Appl. Phys. 83(1), 79–86 (1998)

33.86.

Z. Rosenberg, D. Yaziv, Y. Partom: Calibration of foil-like manganin gauges in planar shock-wave experiments, J. Appl. Phys. 51(6), 3702–3705 (1980)

33.87.

Y.M. Gupta: Analysis of manganin and ytterbium gauge data under shock loading, J. Appl. Phys. 54(9), 6094–6098 (1983)

33.88.

R.A. Graham, F.W. Neilson, W.B. Benedick: Piezoelectric current from shock-loaded quartz - a submicrosecond stress gauge, J. Appl. Phys. 36(5), 1775–00 (1965)

33.89.

T. Obara, N.K. Bourne, Y. Mebar: The construction and calibration of an inexpensive PVDF stress gauge for fast pressure measurements, Meas. Sci. Technol. 6(4), 345–348 (1995)

33.90.

L.M. Barker: The accuracy of VISAR instrumentation. In: Shock Compression of Condensed Matter - 1997, ed. by S.C. Schmidt, D.P. Dandekar, J.W. Forbes (Am. Inst. Phys., Woodbury, 1998) pp. 833–836

33.91.

L.M. Barker: The development of the VISAR and its use in shock compression science. In: Shock Compression of Condensed Matter - 1999, ed. by M.D. Furnish, L.C. Chhabildas, R.S. Hixson (Am. Inst. Phys., Melville 2000) pp. 11–17

33.92.

L.M. Barker, R.E. Hollenbach: Laser interferometer for measuring high velocities of any reflecting surface, J. Appl. Phys. 43, 4669–4675 (1972)

33.93.

J. Edwards, K.T. Lorenz, B.A. Remington, S. Pollaine, J. Colvin, D. Braun, B.F. Lasinski, D. Reisman, J.M. McNaney, J.A. Greenough, R. Wallace, H. Louis, D. Kalantar: Laser-driven plasma loader for shockless compression and acceleration of samples in the solid state, Phys. Rev. Lett. 92(6) (2004)

33.94.

N.K. Bourne, Z. Rosenberg, J.E. Field: High-speed photography of compressive failure waves in glasses, J. Appl. Phys. 78, 3736–3739 (1995)

33.95.

B. Paliwal, K.T. Ramesh, J.W. McCauley: Direct observation of the dynamic compressive failure of a transparent polycrystalline ceramic (AlON), J. Am. Ceramic Soc. 89(6), 2128–2133 (2006)

33.96.

K. Ravi-Chandar: Dynamic fracture (Wiley, New York 2005)

33.97.

E. El-Magd, M. Brodmann: Influence of precipitates on ductile fracture of aluminium alloy AA7075 at high strain rates, Mat. Sci. Eng. A. Struct. Mat. Prop. Microstruct. Proces. 307(1-2), 143–150 (2001)

33.98.

D.M. Goto, D.A. Koss, V. Jablokov: The influence of tensile stress states on the failure of HY-100 steel, Metallurg. Mat. Trans. A 30(9), 2835–2842 (1999)

33.99.

J. Kang, M. Jain, D.S. Wilkinson, J.D. Embury: Microscopic strain mapping using scanning electron microscopy topography image correlation at large strain, J. Strain Anal. Eng. Design 40(5), 559–570 (2005)

33.100.

W. Tong, H. Tao, X.Q. Jiang, N.A. Zhang, M.P. Marya, L.G. Hector, X.H.Q. Gayden: Deformation and fracture of miniature tensile bars with resistance-spot-weld microstructures, Metallurg. Mat. Trans. A 36A(10), 2651–2669 (2005)

33.101.

B. Wattrisse, A. Chrysochoos, J.M. Muracciole, M. Nemoz-Gaillard: Kinematic manifestations of localisation phenomena in steels by digital image correlation, Europ. J. Mech. A 20(2), 189–211 (2001)MATH

33.102.

B. Wattrisse, A. Chrysochoos, J.M. Muracciole, M. Nemoz-Gaillard: Analysis of strain localization during tensile tests by digital image correlation, Exp. Mech. 41(1), 29–39 (2001)

33.103.

P.E. Magnusen, E.M. Dubensky, D.A. Koss: The effect of void arrays on void linking during ductile fracture, Acta Metallurgica 36(5), 1503–1509 (1988)

33.104.

E.M. Dubensky, D.A. Koss: Void pore distributions and ductile fracture, Metallurg. Mat. Trans. A 18(9), 1887–1895 (1987)

33.105.

R.J. Bourcier, Koss D.A., R.E. Smelser, O. Richmond: The influence of porosity on the deformation and fracture of alloys, Acta Metallurgica 34(12), 2443–2453 (1986)

33.106.

T. Pardoen, I. Doghri, F. Delannay: Experimental and numerical comparison of void growth models and void coalescence criteria for the prediction of ductile fracture in copper bars, Acta Mater. 46(2), 541–00 (1998)

33.107.

H.J. Prentice, W.G. Proud: 3 Dimensional dynamic deformation measurments using stereoscopic imaging and digital speckle photography. In: Shock Compression of Condensed Matter, Vol. 2, ed. by M.D. Furnish, M. Elert, T.P. Russell, C.T. White (AIP, Baltimore 2005) p. 1275

33.108.

X.Y. Wu, K.T. Ramesh, T.W. Wright: The effects of thermal softening and heat conduction on the dynamic growth of voids, Int. J. Sol. Struct. 40(13), 4461–4478 (2003)MATH

33.109.

G. Ravichandran, R.J. Clifton: Dynamic fracture under plane-wave loading, Int. J. Fract. 40(3), 157–201 (1989)

33.110.

V. Prakash, L.B. Freund, R.J. Clifton: Stress wave radiation from a crack tip during dynamic initiation, J. Appl. Mech.-Trans. ASME 59(2), 356–365 (1992)

33.111.

M. Zhou, R.J. Clifton: Dynamic ductile rupture under conditions of plane strain, Int. J. Imp. Eng. 19(3), 189–206 (1997)

33.112.

Z. Zhang, R.J. Clifton: Shear band propagation from a crack tip, J. Mech. Phys Sol. 51(11-12), 1903–1922 (2003)

33.113.

R. Godse, G. Ravichandran, R.J. Clifton: Micromechanisms of dynamic crack-propagation in an aisi-4340-steel, Mat. Sci. Eng. A 112, 79–88 (1989)

33.114.

J.N. Johnson: Dynamic fracture and spallation in ductile solids, J. Appl. Phys. 52(4), 2812–2825 (1981)

33.115.

D.E. Grady: The spall strength of condensed matter, J. Mech. Phys Sol. 36(3), 353–00 (1988)

33.116.

G.I. Kanel, S.V. Razorenov, K. Baumung, J. Singer: Dynamic yield and tensile strength of aluminum single crystals at temperatures up to the melting point, J. Appl. Phys. 90(1), 136–143 (2001)

33.117.

T. Antoun, L. Seaman, D.R. Curran, G.I. Kanel, S.V. Razorenov, A.V. Utkin: Spall Fracture (Springer, New York 2004)

33.118.

Y.L. Bai, B. Dodd: Adiabatic Shear Localization: Occurrence, Theories and Applications (Pergamon, Oxford 1992)

33.119.

T.W. Wright: The mathematical theory of adiabatic shear bands (Cambridge Univ. Press, Cambridge 2002)

33.120.

J.H. Giovanola: Observation of adiabatic shear banding in simple torsion. In: Impact Loading and Dynamic Behaviour of Materials, ed. by C.Y. Chiem, H.D. Kunze, L.W. Meyer (DGM Informationsgesellschaft, Oberursel 1988) pp. 705–710

33.121.

M.G. daSilva, K.T. Ramesh: The rate-dependent deformation and localization of fully dense and porous Ti-6Al-4V, Mat. Sci. Eng. A 232(1-2), 11–22 (1997)

33.122.

K.T. Ramesh: On the localization of shearing deformations in a tungsten heavy alloy, Mech. Materials 17, 165–173 (1994)

33.123.

A. Molinari, R.J. Clifton: Analytical characterization of shear localization in thermoviscoplastic materials, J. Appl. Mech.-Trans. ASME 54(4), 806–812 (1987)MATH

33.124.

B. Deltort: Experimental and numerical aspects of adiabatic shear in a 4340 steel, J. Phys. IV France Colloq. C8 (DYMAT 94) 4, 447–452 (1994)

33.125.

D.R. Chichili, K.T. Ramesh, K.J. Hemker: Adiabatic shear localization in alpha-titanium: experiments, modeling and microstructural evolution, J. Mech. Phys Sol. 52(7), 1889–1909 (2004)MATH

33.126.

D.R. Chichili, K.T. Ramesh: Recovery experiments for adiabatic shear localization: A novel experimental technique, J. Appl. Mech.-Transact. ASME 66(1), 10–20 (1999)

33.127.

Q. Xue, L.T. Shen, T.L. Bai: Elimination of loading reverberation in the split Hopkinson torsional bar, Rev. Sci. Instr. 66(9), 5298–5304 (1995)

33.128.

M.A. Meyers, G. Subhash, B.K. Kad, L. Prasad: Evolution of microstructure and shear-band formation in alpha-hcp titanium, Mech. Mat. 17(2-3), 175–193 (1994)

33.129.

Z.Q. Duan, S.X. Li, D.W. Huang: Microstructures and adiabatic shear bands formed by ballistic impact in steels and tungsten alloy, Fat. Fract. Eng. Mat. Struct. 26(12), 1119–1126 (2003)

33.130.

Q. Xue, M.A. Meyers, V.F. Nesterenko: Self-organization of shear bands in titanium and Ti-6Al-4V alloy, Acta Mater. 50(3), 575–596 (2002)

33.131.

D. Rittel, S. Lee, G. Ravichandran: A shear-compression specimen for large strain testing, Exp. Mech. 42(1), 58–64 (2002)

33.132.

M. Zhou, A.J. Rosakis, G. Ravichandran: Dynamically propagating shear bands in impact-loaded prenotched plates. 1. Experimental investigations of temperature signatures and propagation speed, J. Mech. Phys Sol. 44(5), 981–1006 (1996)

33.133.

P.R. Guduru, A.J. Rosakis, G. Ravichandran: Dynamic shear bands: an investigation using high speed optical and infrared diagnostics, Mech. Mat. 33(6), 371–402 (2001)

33.134.

D.E. Grady, D.A. Benson: Fragmentation of metal rings by electromagnetic loading, Exp. Mech. 23(4), 393–400 (1983)

33.135.

W.H. Gourdin: The expanding ring as a high-strain rate test, J. Met. 39(10), A65–A65 (1987)

33.136.

S. Dujardin, G. Gazeaud, A. Lichtenberger: Dynamic behavior of copper studied using the expanding ring test, J. Physique 49(C-3), 55–62 (1988)

33.137.

W.H. Gourdin: Analysis and assessment of electromagnetic ring expansion as a high-strain-rate test, J. Appl. Phys. 65(2), 411–422 (1989)

33.138.

W.H. Gourdin: Constitutive properties of copper and tantalum at high-rates of tensile strain - expanding ring results, Inst. Phys. Conf. Ser. 102, 221–226 (1989)

33.139.

W.H. Gourdin, S.L. Weinland, R.M. Boling: Development of the electromagnetically launched expanding ring as a high-strain-rate test technique, Rev. Sci. Instr. 60(3), 427–432 (1989)

33.140.

H. Zhang, K. Ravi-Chandar: On the dynamics of necking and fragmentation - I. Real-time and post-mortem observations in Al6061-O, Int. J. Fracture 142, 183 (2006)

33.141.

F.H. Zhou, J.F. Molinari, K.T. Ramesh: Analysis of the brittle fragmentation of an expanding ring, Comp. Mat. Sci. 37(1-2), 74–85 (2006)

33.142.

P.R. Guduru, L.B. Freund: The dynamics of multiple neck formation and fragmentation in high rate extension of ductile materials, Int. J. Sol. Struct. 39(21-22), 5615–5632 (2002)MATH

33.143.

M.J. Forrestal, B.W. Duggin, R.I. Butler: Explosive loading technique for the uniform expansion of 304 stainless steel cylinders at high strain rates, J. Appl. Mech.-Transact. ASME 47(1), 17–20 (1980)

33.144.

J.F. Kalthoff: On the measurement of dynamic fracture toughnesses - a review of recent work, Int. J. Fract. 27(3-4), 277–298 (1985)

33.145.

R.A.W. Mines: Characterization and measurement of the mode 1-dynamic initiation of cracks in metals at intermediate strain rates - a review, Int. J. Imp. Eng. 9(4), 441–454 (1990)MathSciNet

33.146.

A.J. Rosakis: Application of coherent gradient sensing (cgs) to the investigation of dynamic fracture problems, Optics Lasers Eng. 19(1-3), 3–41 (1993)

33.147.

K. Ravi-Chandar: Dynamic fracture of nominally brittle materials, Int. J. Fract. 90(1-2), 83–102 (1998)

33.148.

A. Shukla: High-speed fracture studies on bimaterial interfaces using photoelasticity - a review, J. Strain Anal. Eng. Design 36(2), 119–142 (2001)

33.149.

J.F. Kalthoff: Modes of dynamic shear failure in solids, Int. J. Fract. 101(1-2), 1–31 (2000)

33.150.

D.D. Anderson, A. Rosakis: Comparison of three real time techniques for the measurement of dynamic fracture initiation toughness in metals, Eng. Fract. Mech. 72(4), 535–555 (2005)

33.151.

V. Parameswaran, A. Shukla: Dynamic fracture of a functionally gradient material having discrete property variation, J. Mat. Sci. 33(10), 3303–331 (1998)

33.152.

A.J. Rosakis, A.T. Zehnder, R. Narasimhan: Caustics by reflection and their application to elastic-plastic and dynamic fracture-mechanics, Optic. Eng. 27(7), 596–610 (1988)

33.153.

K. Arakawa, R.H. Drinnon, M. Kosai, A.S. Kobayashi: Dynamic fracture-analysis by moire interferometry, Exp. Mech. 31(4), 306–309 (1991)

33.154.

H.V. Tippur, A.J. Rosakis: Quasi-static and dynamic crack-growth along bimaterial interfaces - a note on crack-tip field-measurements using coherent gradient sensing, Exp. Mech. 31(3), 243–251 (1991)

33.155.

T.A. Siewert, M.P. Monahan (Eds.): Pendulum Impact Testing: A Century of Progress (ASTM International, Conshohocken 2000)

Titel: High Rates and Impact Experiments
verfasst von: Kaliat T. Ramesh, Prof.
Verlag: Springer US
Buch: Springer Handbook of Experimental Solid Mechanics
Print ISBN: 978-0-387-26883-5

Electronic ISBN: 978-0-387-30877-7

Copyright-Jahr: 2008
DOI: https://doi.org/10.1007/978-0-387-30877-7_33

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht