nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

04.07.2022 | ORIGINAL ARTICLE

Metal flow behaviour and processing maps of high heat resistant steel during hot compression

verfasst von: Japheth Obiko, Lesley Chown, David Whitefield, Micheal Bodunrin

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 5-6/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This article reports the flow stress behaviour of ASTM A335 P92 steel. Uniaxial isothermal compression experiments were conducted to examine the hot deformation behaviour of P92 steel in a Gleeble^® 3500 thermal–mechanical simulator. The test conditions were 0.01–10 s⁻¹ strain rate and 850–1000 ℃ deformation temperature. Constitutive equations and processing maps developed were used to describe the hot deformation process. The results showed that the flow stress–strain curves exhibited a dynamic recovery (DRV) behaviour as the dominant softening mechanism. The flow stress decreased with an increase in the deformation temperature or a decrease in strain rate. Using the Arrhenius equation, the stress exponent and the activation energy values were 8.0 kJ.mol⁻¹ and 487.56 kJ.mol⁻¹, respectively. The correlation between the constructed processing maps and microstructure showed that the optimal process parameters occurred at a lower strain rate in the region of 0.1 s⁻¹ and deformation temperatures of 900–950 ℃ and 1000 ℃ for the steel investigated.

Vorheriger Artikel Analytical modeling and experimental verification of the depth of subsurface heat-affected layer in gear profile grinding

Nächster Artikel Prediction and optimization of gear skiving parameters and geometric deviations

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Zhu L, He J, Zhang Y (2018) A two-stage constitutive model of X12CrMoWVNbN10-1-1 steel during elevated temperature. Mater Res Express 5:1–11

Wang S, Huang Y, Xiao Z, Liu Y, Liu H (2017) A modified Johnson-Cook model for hot deformation behavior of 35CrMo steel. Metals (Basel) 7(9):337. https://doi.org/10.3390/met7090337CrossRef

Samantaray D, Mandal S, Bhaduri AK (2010) Constitutive analysis to predict high-temperature flow stress in modified 9Cr-1Mo (P91) steel. Mater Des 31(2):981–984. https://doi.org/10.1016/j.matdes.2009.08.012CrossRef

Lin YC, Chen MS, Zhang J (2009) Modeling of flow stress of 42CrMo steel under hot compression. Mater Sci Eng A 499(1–2):88–92. https://doi.org/10.1016/j.msea.2007.11.119CrossRef

Yin F, Hua L, Mao H, Han X (2013) Constitutive modeling for flow behavior of GCr15 steel under hot compression experiments. Mater Des 43:393–401. https://doi.org/10.1016/j.matdes.2012.07.009CrossRef

Lin YC, Chen XM (2011) A critical review of experimental results and constitutive descriptions for metals and alloys in hot working. Mater Des 32(4):1733–1759. https://doi.org/10.1016/j.matdes.2010.11.048CrossRef

Zhang ZJ, Dai GZ, Wu SN, Dong LX, Liu LL (2009) Simulation of 42CrMo steel billet upsetting and its defects analyses during forming process based on the software DEFORM-3D. Mater Sci Eng A 499(1–2):49–52. https://doi.org/10.1016/j.msea.2007.11.135CrossRef

He A, Xie G, Yang X, Wang X, Zhang H (2015) A physically-based constitutive model for a nitrogen alloyed ultralow carbon stainless steel. Comput Mater Sci 98:64–69. https://doi.org/10.1016/j.commatsci.2014.10.044CrossRef

Mirzadeh H, Cabrera JM, Prado JM, Najafizadeh A (2011) Hot deformation behavior of a medium carbon microalloyed steel. Mater Sci Eng A 528(10–11):3876–3882. https://doi.org/10.1016/j.msea.2011.01.098CrossRef

10.

Mirzadeh H, Cabrera JM, Najafizadeh A (2011) Constitutive relationships for hot deformation of austenite. Acta Mater 59(16):6441–6448. https://doi.org/10.1016/j.actamat.2011.07.008CrossRef

11.

Wang B, Fu W, Lv Z, Jiang P, Zhang W, Tian Y (2008) Study on hot deformation behavior of 12%Cr ultra-super-critical rotor steel. Mater Sci Eng A 487(1–2):108–113. https://doi.org/10.1016/j.msea.2007.10.007CrossRef

12.

Qian LY, Fang G, Zeng P, Wang LX (2015) Correction of flow stress and determination of constitutive constants for hot working of API X100 pipeline steel. Int J Press Vessel Pip 132–133(November):43–51. https://doi.org/10.1016/j.ijpvp.2015.05.008CrossRef

13.

He A, Xie G, Zhang H, Wang X (2013) A comparative study on Johnson-Cook, modified Johnson-Cook and Arrhenius-type constitutive models to predict the high temperature flow stress in 20CrMo alloy steel. Mater Des 52:677–685. https://doi.org/10.1016/j.matdes.2013.06.010CrossRef

14.

Yang ZN, Dai LQ, Chu CH, Zhang FC, Wang LW, Xiao AP (2017) Effect of aluminum alloying on the hot deformation behavior of nano-bainite bearing steel. J Mater Eng Perform 26(12):5954–5962. https://doi.org/10.1007/s11665-017-3018-7CrossRef

15.

Alsagabi S (2016) High temperature deformation behavior of P92 steel. Trans Indian Inst Met 69(8):1513–1518. https://doi.org/10.1007/s12666-015-0725-3CrossRef

16.

Shi RX, Liu ZD (2011) Hot deformation behavior of P92 steel used for ultra-super-critical power plants. J Iron Steel Res Int 18(7):53–58. https://doi.org/10.1016/S1006-706X(11)60090-3CrossRef

17.

Liu CY, Zhang RJ, Yan YN (2011) Hot deformation behaviour and constitutive modelling of P92 heat resistant steel. Mater Sci Technol 27(8):1281–1286. https://doi.org/10.1179/026708310x12683158443323CrossRef

18.

Huang Y, Wang S, Xiao Z, Liu H (2017) Critical condition of dynamic recrystallization in 35CrMo steel. Metals (Basel) 7(5):161. https://doi.org/10.3390/met7050161CrossRef

19.

Nagode A, Kosec L, Ule B, Kosec G (2011) Review of creep resistant alloys for power plant applications. Metalurgija 50(1):45–48. Available: http://hrcak.srce.hr/index.php?show=clanak&id_clanak_jezik=91407. Accessed Jan 2011.

20.

Oñoro J (2006) Weld metal microstructure analysis of 9–12% Cr steels. Int J Press Vessel Pip 83(7):540–545. https://doi.org/10.1016/j.ijpvp.2006.03.005CrossRef

21.

Czyrska-Filemonowicz A, Zielińska-Lipiec A, Ennis PJ (2006) Modified 9% Cr steels for advanced power generation : microstructure and properties. J Achiev Mater Manuf Eng 19(2):43–48. Available: http://www.edu.ptnss.pb.journalamme.org/papers_vol19_2/1309.pdf. Accessed 30 Oct 2006. Copyright by International OCSCO World Press. All rights reserved. 2006

22.

Zhang P, Yi C, Chen G, Qin H, Wang C (2016) Constitutive model based on dynamic recrystallization behavior during thermal deformation of a nickel-based superalloy. Metals (Basel) 6(7):161. https://doi.org/10.3390/met6070161CrossRef

23.

He J, Zhang D, Zhang W, Qiu C, Zhang W (2017) Constitutive equation and hot compression deformation behavior of homogenized Al-7.5Zn-1.5Mg-0.2Cu-0.2Zr alloy. Materials (Basel) 10(10):1–12. https://doi.org/10.3390/ma10101193CrossRef

24.

Luan J, Sun C, Li X, Zhang Q (2014) Constitutive model for AZ31 magnesium alloy based on isothermal compression test. Mater Sci Technol 30(2):211–219. https://doi.org/10.1179/1743284713Y.0000000341CrossRef

25.

Výrostková A, Homolová V, Pecha J, Svoboda M (2008) Phase evolution in P92 and E911 weld metals during ageing. Mater Sci Eng A 480(1–2):289–298. https://doi.org/10.1016/j.msea.2007.07.036CrossRef

26.

Jha JS, Tewari A, Mishra S, Toppo S (2017) Constitutive relations for Ti-6Al-4V hot working. Procedia Eng 173:755–762. https://doi.org/10.1016/j.proeng.2016.12.089CrossRef

27.

Tabuchi M, Watanabe T, Kubo K, Matsui M, Kinugawa J, Abe F (2001) Creep crack growth behavior in the HAZ of weldments of W containing high Cr steel. Int J Press Vessel Pip 78(11–12):779–784. https://doi.org/10.1016/S0308-0161(01)00090-4CrossRef

28.

David SA, Siefert JA, Feng Z (2013) Welding and weldability of candidate ferritic alloys for future advanced ultrasupercritical fossil power plants. Sci Technol Weld Joining 18(8):631–651. https://doi.org/10.1179/1362171813Y.0000000152CrossRef

29.

Milović L, Vuherer T, Blačić I, Vrhovac M, Stanković M (2013) Microstructures and mechanical properties of creep resistant steel for application at elevated temperatures. Mater Des 46:660–667. https://doi.org/10.1016/j.matdes.2012.10.057CrossRef

30.

Sakthivel T, Selvi SP, Parameswaran P, Laha K (2016) Creep deformation and rupture behaviour of thermal aged P92 steel. Mater High Temp 33(1):33–43. https://doi.org/10.1179/1878641315Y.0000000016CrossRef

31.

Ohgami M, Naoi H, Kinbara S, Mimura H, Ikemoto T, Fujita T (1997) Development of 9CrW tube, pipe and forging for ultra supercritical power plant boilers. Nippon Steel Technical Report 72:59–64

32.

Lv C, Zhang L, Mu Z, Tai Q, Zheng Q (2008) 3D FEM simulation of the multi-stage forging process of a gas turbine compressor blade. J Mater Process Technol 198(1–3):463–470. https://doi.org/10.1016/j.jmatprotec.2007.07.032CrossRef

33.

Lin YC, Chen MS, Zhong J (2008) Numerical simulation for stress/strain distribution and microstructural evolution in 42CrMo steel during hot upsetting process. Comput Mater Sci 43(4):1117–1122. https://doi.org/10.1016/j.commatsci.2008.03.010CrossRef

34.

Saber M, Tanner DWJ, Sun W, Hyde TH (2011) Determination of creep and damage properties for P92 at 675 C. J Strain Anal Eng Des 46(8):842–851. https://doi.org/10.1177/0309324711413012CrossRef

35.

Samuel EI, Choudhary BK, Palaparti DR, Mathew MD (2013) Creep deformation and rupture behaviour of P92 steel at 923 K. Procedia Eng 55:64–69. https://doi.org/10.1016/j.proeng.2013.03.220

36.

Andrew K (1965) Empirical formulae for the calculation of some transformation temperatures. J Iron Steel Inst 203:721–727. Available: https://www.bu.edu.eg/portal/uploads/EngineeringShoubra/CivilEngineering/2469/crs-6270/Files/Fatigue%20and%20creep.pdf. J-GLOBAL ID: 201602014618299110 Reference number:65A0184087.

37.

Kim H, Inoue J, Okada M, Nagata K (2017) Prediction of Ac3and martensite start temperatures by a data-driven model selection approach. ISIJ Int 57(12):2229–2236. https://doi.org/10.2355/isijinternational.ISIJINT-2017-212CrossRef

38.

Shokry A, Gowid S, Kharmanda G (2019) Constitutive models for the prediction of the hot deformation behavior of the 10%Cr steel alloy. Materials (Basel) 12(18):1–18. https://doi.org/10.3390/ma12182873CrossRef

39.

Wang H, Liu D, Wang J, Shi Y, Zheng Y, Hu Y (2019) Investigation on the thermal deformation behavior of the nickel-based superalloy strengthened by γ′ phase. Crystals 9(3):1–14. https://doi.org/10.3390/cryst9030125CrossRef

40.

Rastegari H, Kermanpur A, Najafizadeh A, Porter D, Somani M (2015) Warm deformation processing maps for the plain eutectoid steels. J Alloys Compd 626:136–144. https://doi.org/10.1016/j.jallcom.2014.11.170CrossRef

41.

Wang L, Liu F, Zuo Q, Chen CF (2013) Prediction of flow stress for N08028 alloy under hot working conditions. Mater Des 47:737–745. https://doi.org/10.1016/j.matdes.2012.12.074CrossRef

42.

Sellars CM, McTegart WJ (1966) On the mechanism of hot deformation. Acta Metall 14(9):1136–1138. https://doi.org/10.1016/0001-6160(66)90207-0CrossRef

43.

McQueen HJ, Ryan ND (2002) Constitutive analysis in hot working. Mater Sci Eng A 322(1–2):43–63. https://doi.org/10.1016/S0921-5093(01)01117-0CrossRef

44.

Laasraoui A, Jonas JJ (1991) Prediction of steel flow stresses at high temperatures and strain rates. Metall Trans A 22(7):1545–1558. https://doi.org/10.1007/BF02667368CrossRef

45.

Oudin A, Barnett MR, Hodgson PD (2004) Grain size effect on the warm deformation behaviour of a Ti-IF steel. Mater Sci Eng A 367(1–2):282–294. https://doi.org/10.1016/j.msea.2003.10.273CrossRef

46.

Xiao X, Liu G, Hu B, Zheng X, Wang L, Chen S, Ullah A (2012) A comparative study on Arrhenius-type constitutive equations and artificial neural network model to predict high-temperature deformation behaviour in 12Cr3WV steel. Comput Mater Sci 62:227–234. https://doi.org/10.1016/j.commatsci.2012.05.053CrossRef

47.

Carsí M, Peñalba F, Rieiro I, Ruano OA (2011) High temperature workability behavior of a modified P92 steel. Int J Mater Res 102(11):1378–1383. https://doi.org/10.3139/146.110603CrossRef

48.

Ennis PJ, Zielinska-Lipiec A, Wachter O, Czyrska-Filemonowicz A (1997) Microstructural stability and creep rupture strength of the martensitic steel P92 for advanced power plant. Acta Mater 45(12):4901–4907. https://doi.org/10.1016/S1359-6454(97)00176-6CrossRef

49.

Osakada K (2007) Effects of strain rate and temperature in forming processes of metals. Le J Phys IV 7(C3):C3-XXXVII-C3-XLIV. https://doi.org/10.1051/jp4:1997302

50.

Sun SL, Zhang MG, He WW (2010) Hot deformation behavior and hot processing map of P92 steel. Advanced Materials Research 97–101:290–295. https://doi.org/10.4028/www.scientific.net/AMR.97-101.290CrossRef

51.

Cabrera JM, Al Omar A, Prado JM, Jonas JJ (1997) Modeling the flow behavior of a medium carbon microalloyed steel under hot working conditions. Metall Mater Trans A Phys Metall Mater Sci 28(11):2233–2243. https://doi.org/10.1007/s11661-997-0181-8

52.

Ashby MF (1972) A first report on deformation-mechanism maps. Acta Metall 20(7):887–897. https://doi.org/10.1016/0001-6160(72)90082-XCrossRef

53.

Yang Z, Zhang F, Zheng C, Zhang M, Lv B, Qu L (2015) Study on hot deformation behaviour and processing maps of low carbon bainitic steel. Mater Des 66(PA):258–266. https://doi.org/10.1016/j.matdes.2014.10.068

54.

Li S, Eliniyaz Z, Zhang L, Sun F, Shen Y, Shan A (2012) Microstructural evolution of delta ferrite in SAVE12 steel under heat treatment and short-term creep. Mater Charact 73:144–152. https://doi.org/10.1016/j.matchar.2012.08.009CrossRef

55.

Ryu SH, Yu J (1998) A new equation for the Cr equivalent in 9 to 12. Pct Cr Steels 29A(June):1573–1574

56.

Zhang XZ, Wu XJ, Liu R, Liu J, Yao MX (2017) Deformation-mechanism-based modeling of creep behavior of modified 9Cr-1Mo steel. Mater Sci Eng A 689(February):345–352. https://doi.org/10.1016/j.msea.2017.02.044CrossRef

57.

Medina SF, Hernandez CA (1996) General expression of the Zener-Hollomon parameter as a function of the chemical composition of low alloy and microalloyed steels. Acta Mater 44(1):137–148. https://doi.org/10.1016/1359-6454(95)00151-0CrossRef

58.

Suikkanen PP, Lang VTE, Somani MC, Porter DA, Karjalainen LP (2012) Effect of silicon and aluminium on austenite static recrystallization kinetics in high-strength TRIP-aided steels. ISIJ Int 52(3):471–476. https://doi.org/10.2355/isijinternational.52.471CrossRef

59.

Zhang J, Di H, Wang X, Cao Y, Zhang J, Ma T (2013) Constitutive analysis of the hot deformation behavior of Fe-23Mn-2Al-0.2C twinning induced plasticity steel in consideration of strain. Mater Des 44:354–364. https://doi.org/10.1016/j.matdes.2012.08.004CrossRef

60.

Menapace C, Sartori N, Pellizzari M, Straffelini G (2018) Hot deformation behavior of four steels: a comparative study. J Eng Mater Technol 140(2):021006. https://doi.org/10.1115/1.4038670CrossRef

61.

Fedoseeva A, Dudova N, Kaibyshev R (2016) Creep strength breakdown and microstructure evolution in a 3%Co modified P92 steel. Mater Sci Eng A 654:1–12. https://doi.org/10.1016/j.msea.2015.12.027CrossRef

62.

Klueh R, Maziasz P (1990) Reduced activation austenitic stainless steels: the Fe-Mn-Cr-C system in reduced activation materials for fusion reactors, ed. R. Klueh, D. Gelles, M. Okada, and N. Packan (West Conshohocken, PA: ASTM International, 1990). In Reduced Activation Materials for Fusion Reactors, pp 7–18

63.

Swindeman RW, Santella ML, Maziasz PJ, Roberts BW, Coleman K (2004) Issues in replacing Cr-Mo steels and stainless steels with 9Cr-1Mo-V steel. Int J Press Vessel Pip 81(6):507–512. https://doi.org/10.1016/j.ijpvp.2003.12.009CrossRef

64.

Sun C, Zuo X, Xiang Y, Yang J (2016) Investigation on hot deformation behavior and hot processing map of BSTMUF601 super-alloy. Metals (Basel) 6(3):70. https://doi.org/10.3390/met6030070CrossRef

65.

Srinivasulu S, Jain A (2006) A comparative analysis of training methods for artificial neural network rainfall-runoff models. Appl Soft Comput J 6(3):295–306. https://doi.org/10.1016/j.asoc.2005.02.002CrossRef

66.

Li Y, Ji H, Li W, Li Y, Pei W, Liu J (2018) Hot deformation characteristics-constitutive equation and processing maps-of 21–4N heat-resistant steel. Materials (Basel) 12(1). https://doi.org/10.3390/ma12010089

67.

Prasad YV, Rao KP, Sasidhar S (2015) Hot working guide a compendium of processing maps

68.

Saxena K, Sonkar S, Pancholi V, Chaudhari G, Srivastava D, Dey G, Jha S, Saibaba N (2016) Hot deformation behavior of Zr-2.5Nb alloy: a comparative study using different materials models. J Alloys Compd 662:94–101. https://doi.org/10.1016/j.jallcom.2015.11.183CrossRef

69.

Momeni A, Dehghani K (2010) Characterization of hot deformation behavior of 410 martensitic stainless steel using constitutive equations and processing maps. Mater Sci Eng A 527(21–22):5467–5473. https://doi.org/10.1016/j.msea.2010.05.079CrossRef

70.

Samantaray D, Mandal S, Bhaduri AK (2011) Optimization of hot working parameters for thermo-mechanical processing of modified 9Cr-1Mo (P91) steel employing dynamic materials model. Mater Sci Eng A 528(15):5204–5211. https://doi.org/10.1016/j.msea.2011.03.025CrossRef

71.

Narayana Murty SV, Nageswara Rao B (1998) Ziegler’s criterion on the instability regions in processing maps. J Mater Sci Lett 17(14):1203–1205. https://doi.org/10.1023/A:1006541710533

72.

Quan G, Zhao L, Chen T, Wang Y, Mao Y, Lv W, Zhou J (2012) Identification for the optimal working parameters of as-extruded 42CrMo high-strength steel from a large range of strain, strain rate and temperature. Mater Sci Eng A 538:364–373. https://doi.org/10.1016/j.msea.2012.01.062CrossRef

73.

Narayana Murty SV, Nageswara Rao B, Kashyap BP (2000) Instability criteria for hot deformation of materials. Int Mater Rev 45(1):15–26. https://doi.org/10.1179/095066000771048782

74.

Zhang G, Zhou Z, Sun H, Zou L, Wang M, Li S (2014) Hot deformation behavior and processing map of a 9Cr ferritic/martensitic ODS steel. J Nucl Mater 455(1–3):139–144. https://doi.org/10.1016/j.jnucmat.2014.05.043CrossRef

75.

Xiong M, Weidong Z, Yu S, Yongqing Z, Shaoli W, Yigang Z (2010) A comparative study of various flow instability criteria in processing map. Rare Met Mater Eng 39(5):756–761. https://doi.org/10.1016/S1875-5372(10)60096-3CrossRef

76.

Zhang C, Zhang L, Shen W, Liu C, Xia Y, Li R (2016) Study on constitutive modeling and processing maps for hot deformation of medium carbon Cr-Ni-Mo alloyed steel. Mater Des 90:804–814. https://doi.org/10.1016/j.matdes.2015.11.036CrossRef

77.

Montheillet F, Jonas J (1996) Modeling of dynamic material behavior : a critical evaluation of the dissipator power Co-content approach. Metall Mater Trans A 27A:232–235CrossRef

78.

Poletti C, Degischer HP, Kremmer S, Marketz W (2008) Processing maps of Ti662 unreinforced and reinforced with TiC particles according to dynamic models 486:127–137. https://doi.org/10.1016/j.msea.2007.08.077

79.

Lin Y, Li L, Xia C, Jiang Q (2013) Hot deformation and processing map of a typical Al-Zn-Mg-Cu alloy. J Alloys Compd 550:438–445. https://doi.org/10.1016/j.jallcom.2012.10.114CrossRef

80.

Samantaray D, Mandal S, Bhaduri AK (2011) Characterization of deformation instability in modified 9Cr-1Mo steel during thermo-mechanical processing. Mater Des 32(2):716–722. https://doi.org/10.1016/j.matdes.2010.07.038CrossRef

Titel: Metal flow behaviour and processing maps of high heat resistant steel during hot compression
verfasst von: Japheth Obiko
Lesley Chown
David Whitefield
Micheal Bodunrin
Publikationsdatum: 04.07.2022
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 5-6/2022
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-022-09577-3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 5-6/2022

Production and optimization of the modulus of elasticity, modulus of rupture, and impact energy of GLP-HDPE composite materials using the robust Taguchi technique

Prototyping of straight section components using incremental shape rolling

Improving machining accuracy for a robotic arm with hybrid kinematic chains based on deformation characteristics

Shear-thickening polishing of inner raceway surface of bearing and suppression of edge effect

Microstructural and corrosion effects of HIP and chemically accelerated surface finishing on laser powder bed fusion Alloy 625

Investigation of the longitudinal-flexural resonating spindle in ultrasound-assisted grinding of SiCp/Al composites

Premium Partner

Marktübersichten