nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

27.02.2023 | ORIGINAL ARTICLE

Influence of WEDM process parameters on aluminum alloy’s surface finish

verfasst von: Dorra Hammami, Sana Louati, Neila Masmoudi, Chedly Bradai

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 1-2/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Wire electrical discharge machining (WEDM) is one of the efficient technologies of unconventional machining used to construct complex shape components, of hard materials or non-ferrous metals such as aluminum alloys. Qualitative assessment of wire electrical discharge machining (WEDM) of 2017T451 and 7075T651 aluminum alloys in terms of surface finish is studied. Three-factor and 3-level WEDM trials are operated by an L9 Taguchi’s orthogonal array to determine the influence of process parameters. Based on surface roughness (Ra) value, the signal-to-noise (S/N) ratio and analysis of variance (ANOVA) results reveal that the pulse on time (TON) and pulse off time (TOFF) are significant cutting parameters affecting the surface roughness (Ra). Surface topography of the treated materials shows that no cracks for the two aluminum alloys are considered in this work.

Vorheriger Artikel Adaptive milling for contours on deformed surface based on on-machine measurement and optimized parallel projection

Nächster Artikel Machine vision-based gradient-boosted tree and support vector regression for tool life prediction in turning

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Starke EA Jr, Staley JT (1996) Application of modern aluminum alloys to aircraft. Prog Aerosp Sci 32(2–3):131–172. https://doi.org/10.1016/0376-0421(95)00004-6CrossRef

Mondolfo LF (2013) Aluminum alloys: structure and properties. Elsevier

Di S, Huang R, Chi G (2006) Study on micro-machining by micro-WEDM. In 2006 1^st IEEE international conference on nano/micro engineered and molecular systems (pp. 615–619) IEEE. https://doi.org/10.1109/NEMS.2006.334857

Sivaprakasam P, Hariharan P, Gowri S (2014) Modeling and analysis of micro-WEDM process of titanium alloy (Ti–6Al–4V) using response surface approach. Eng Sci Technol Int J 17(4):227–235. https://doi.org/10.1016/j.jestch.2014.06.004CrossRef

Ho KH, Newman ST, Rahimifard S, Allen RD (2004) State of the art in wire electrical discharge machining (WEDM). Int J Mach Tools Manuf 44(12–13):1247–1259. https://doi.org/10.1016/j.ijmachtools.2004.04.017CrossRef

Klocke F, Hensgen L, Klink A, Ehle L, Schwedt A (2016) Structure and composition of the white layer in the wire-EDM process. Procedia CIRP 42:673–678. https://doi.org/10.1016/j.procir.2016.02.300CrossRef

Bobbili R, Madhu V, Gogia AK (2013) Effect of wire-EDM machining parameters on surface roughness and material removal rate of high strength armor steel. Mater Manuf Processes 28(4):364–368. https://doi.org/10.1080/10426914.2012.736661CrossRef

Gorji N E, O'Connor R, Brabazon D (2021) XPS and SEM characterization for powder recycling within 3d printing process. 24th International Conference on Material Forming. ESAFORM 2021. MS13 (Additive Manufacturing). https://doi.org/10.25518/ESAFORM21.403

Veeresh M, Raju GS, Saju KK, Rajaprakash BM (2019) Optimization of wire EDM machining parameters for optimum materials removal rate and surface finish in an aluminum 7075–T651 alloy. IJERT -ISSN 2278:0181

10.

Selvakumar G, Sornalatha G, Sarkar S, Mitra S (2014) Experimental investigation and multiobjective optimization of wire electrical discharge machining (WEDM) of 5083 aluminum alloy. Trans Nonferrous Metals Soc China 24(2):373–379. https://doi.org/10.1016/S1003-6326(14)63071-5CrossRef

11.

Mandal K, Bose D, Mitra S, Sarkar S (2020) Experimental investigation of process parameters in WEDM of Al 7075 alloy. Manuf Rev 7:30. https://doi.org/10.1051/mfreview/2020021CrossRef

12.

Tzeng YF, Chen FC (2003) A simple approach for robust design of high-speed electrical discharge machining technology. Int J Mach Tools Manuf 43(3):217–227. https://doi.org/10.1016/S0890-6955(02)00261-4CrossRef

13.

Simao J, Lee HG, Aspinwall DK, Dewes RC, Aspinwall EM (2003) Workpiece surface modification using electrical discharge machining. Int J Mach Tools Manuf 43(2):121–128. https://doi.org/10.1016/S0890-6955(02)00187-6CrossRef

14.

Chen DC, Jhang JJ, Guo MW (2013) Application of Taguchi design method to optimize the electrical discharge machining. J Achiev Mater Manuf Eng 57(2):76–82

15.

Selvakumar G, Sornalatha G, Sarkar S, Mitra S (2014) Experimental investigation and multi objective optimization of wire electrical discharge machining (WEDM) of 5083 aluminum alloy. Trans Nonferrous Metals Soc China 24(2):373–379. https://doi.org/10.1016/S1003-6326(14)63071-5CrossRef

16.

Bagal GS, Karvande RL, Irfan M (2021) Process parameter optimization in wire cut EDM: a review. IJARIIE - ISSN 2395:4396–4397

17.

Kamble N, Jadhav A (2020) A review on machining parameters and optimization of wire EDM process. IRJET -ISSN 2395:0056–0057

18.

Mouralova K, Kovar J, Klakurkova L, Bednar J, Benes L, Zahradnicek R (2018) Analysis of surface morphology and topography of pure aluminium machined using WEDM. Measurement 114:169–176. https://doi.org/10.1016/j.measurement.2017.09.040CrossRef

19.

Rao PS, Ramji K, Satyanarayana B (2014) Experimental investigation and optimization of wire EDM parameters for surface roughness, MRR and white layer in machining of aluminium alloy. Procedia Mater Sci 5:2197–2206. https://doi.org/10.1016/j.mspro.2014.07.426CrossRef

20.

Dave HK, Mathai VJ, Desai KP, Raval HK (2015) Studies on quality of microholes generated on Al 1100 using micro-electro-discharge machining process. Int J Adv Manuf Technol 76(1):127–140CrossRef

21.

Roy RK (2001) Design of experiments using the Taguchi approach: 16 steps to product and process improvement. John Wiley & Sons

22.

Kumar S, Kumar P, Shan HS (2008) Optimization of tensile properties of evaporative pattern casting process through Taguchi’s method. J Mater Process Technol 204(1–3):59–69. https://doi.org/10.1016/j.jmatprotec.2007.10.075CrossRef

23.

Suhail AH, Ismail N, Wong SV, Abdul Jalil NA (2010) Optimization of cutting parameters based on surface roughness and assistance of workpiece surface temperature in turning process. AmJEngApplSci 102:108–113. https://doi.org/10.3844/ajeassp.2010.102.108CrossRef

24.

Guu YH (2005) AFM surface imaging of AISI D2 tool steel machined by the EDM process. Appl Surf Sci 242(3–4):245–250. https://doi.org/10.1016/j.apsusc.2004.08.028CrossRef

25.

Mandaloi G, Singh S, Kumar P, Pal K (2016) Effect on crystalline structure of AISI M2 steel using tungsten–thorium electrode through MRR, EWR, and surface finish. Measurement 90:74–84. https://doi.org/10.1016/j.measurement.2016.04.041CrossRef

26.

Muhammad A, Mirza J, Abbasi JA, Musharaf A, Ahmad W, Salman H (2016) Parametric analysis of recast layer formation in wire-cut EDM of HSLA steel. Int J Adv Manuf Technol 87(1–4):713–722. https://doi.org/10.1007/s00170-016-8518-3CrossRef

27.

Gostimirovic M, Kovac P, Sekulic M, Skoric B (2012) Influence of discharge energy on machining characteristics in EDM. J Mech Sci Technol 26(1):173–179CrossRef

28.

Tai TY, Lu SJ (2009) Improving the fatigue life of electro-discharge-machined SDK11 tool steel via the suppression of surface cracks. Int J Fatigue 31(3):433–438. https://doi.org/10.1016/j.ijfatigue.2008.07.013CrossRef

Titel: Influence of WEDM process parameters on aluminum alloy’s surface finish
verfasst von: Dorra Hammami
Sana Louati
Neila Masmoudi
Chedly Bradai
Publikationsdatum: 27.02.2023
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 1-2/2023
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-023-10929-w

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1-2/2023

Face gear generating grinding residual model based on the normal cutting depth iterative method

Sustainable 4D printing of magneto-electroactive shape memory polymer composites

Absorbance measurement for in situ process regime identification in laser processing

Assessment of the compressive mechanical behavior of injection molded E-glass/polypropylene by mechanical testing and X-ray computed tomography

A 3D finite element analysis of thermally induced residual stress distribution in stainless steel coatings on a mild steel by laser hot wire cladding

A 3D-printable modular robotic gripper

Premium Partner

Marktübersichten