nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

25.07.2023 | ORIGINAL ARTICLE

Enhanced buckling strength of the thin-walled continuous carbon fiber–reinforced thermoplastic composite through dual coaxial nozzles material extrusion process

verfasst von: Dongyang Cao

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 3-4/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The interfacial bonding strength of the two deposited layers under the material extrusion process is always considered a shortcoming in the 3D-printed part. To address this issue, an extra polymer coating is added to the extruded filament by adding another self-designed nozzle concentrically to the original nozzle on the 3D printing head. Three filaments were used in the fabrication process: continuous carbon fiber as reinforcement filament, polylactic acid (PLA) filament as polymer substrate filament, and carbon nanotube (CNT)/PLA filament as polymer coating filament. In addition, the effect of CNT concentration on the 3D-printed thin-walled cylinder CNT/PLA/continuous carbon fiber (CF) composite was investigated by compressive buckling tests. Compared with 3D-printed thin-walled cylinder PLA/CF composite, the buckling loads were enhanced by 16.7%, 32.5%, 40.7%, and 50.1% under 5 wt%, 10 wt%, 15 wt%, and 20 wt% CNT concentration in the PLA polymer filament. This new 3D printing design creates a new possible solution to strengthen the 3D-printed part and can border the application of 3D-printed parts by varying polymer coating type through modifying the nanofiller-modified polymer filament.

Vorheriger Artikel High-temperature gripper for collaborative robots in additive manufacturing

Nächster Artikel Nominal digital twin for new-generation product design

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Dongyang Cao, Sadeq Malakooti, Vijay N. Kulkarni, Yao Ren, Yingjian Liu, Xu Nie, Dong Qian, D.Todd Griffith HL (2021) The effect of resin uptake on the flexural properties of compression molded sandwich composites. Wind Energy. Published online 4–11

Cao D, Malakooti S, Kulkarni VN, Ren Y, Lu H (2020) Nanoindentation measurement of core–skin interphase viscoelastic properties in a sandwich glass composite. Mech Time Depend Mater Published online. https://doi.org/10.1007/s11043-020-09448-yCrossRef

Wang X, Xu T, Andrade MJ de, et al. (2021) The interfacial shear strength of carbon nanotube sheet modified carbon fiber composites. In: Challenges in mechanics of time-dependent materials. Vol 2. Conference Proceedings of the Society for Experimental Mechanics Series https://doi.org/10.1007/978-3-030-59542-5_4

Gorji NE, O’Connor R, Brabazon D (2021) XPS and SEM characterization for powder recycling within 3d printing process. ESAFORM 2021 - 24th International Conference on Material Forming. Published online 2021. https://doi.org/10.25518/ESAFORM21.403

el Magri A, el Mabrouk K, Vaudreuil S, Ebn TM (2021) Experimental investigation and optimization of printing parameters of 3D printed polyphenylene sulfide through response surface methodology. J Appl Polym Sci 138(1):49625. https://doi.org/10.1002/APP.49625CrossRef

Alexandre A, Cruz Sanchez FA, Boudaoud H, Camargo M, Pearce JM (2020) Mechanical properties of direct waste printing of polylactic acid with universal pellets extruder: comparison to fused filament fabrication on open-source desktop three-dimensional printers. 3D Print Addit Manuf 7(5):237–247. https://doi.org/10.1089/3DP.2019.0195CrossRef

Tiwary VKPA, Malik VR (2021) An overview on joining/welding as post-processing technique to circumvent the build volume limitation of an FDM-3D printer. Rapid Prototyp J 27(4):808–821. https://doi.org/10.1108/RPJ-10-2020-0265/FULL/PDFCrossRef

Bharath HS, Bonthu D, Gururaja S, Prabhakar P, Doddamani M (2021) Flexural response of 3D printed sandwich composite. Compos Struct 263:113732. https://doi.org/10.1016/J.COMPSTRUCT.2021.113732CrossRef

Espera AH, Dizon JRC, Chen Q, Advincula RC (2019) 3D-printing and advanced manufacturing for electronics. Prog Addit Manuf 2019 4:3 4(3):245–267. https://doi.org/10.1007/S40964-019-00077-7CrossRef

10.

Guo H, Lv R, Bai S (2019) Recent advances on 3D printing graphene-based composites. Nano Mater Sci 1(2):101–115. https://doi.org/10.1016/j.nanoms.2019.03.003CrossRef

11.

Dizon JRC, Gache CCL, Cascolan HMS, Cancino LT, Advincula RC (2021) Post-processing of 3D-printed polymers. Technologies (Basel) 9(3):61. https://doi.org/10.3390/technologies9030061CrossRef

12.

Valino AD, Ryan Dizon JC, Espera AH Jr, Chen Q, Messman J, Advincula RC (2019) Advances in 3D printing of thermoplastic polymer composites and nanocomposites. Prog Polym Sci 98:101162. https://doi.org/10.1016/j.progpolymsci.2019.101162CrossRef

13.

Blok LG, Longana ML, Yu H, Woods BKS (2018) An investigation into 3D printing of fibre reinforced thermoplastic composites. Addit Manuf 22:176–186. https://doi.org/10.1016/J.ADDMA.2018.04.039CrossRef

14.

15.

Shahrubudin N, Lee TC, Ramlan R (2019) An overview on 3D printing technology: technological, materials, and applications. In: Procedia Manufacturing. Vol 35. Elsevier B.V 1286–1296https://doi.org/10.1016/j.promfg.2019.06.089

16.

Tay YWD, Panda B, Paul SC, Noor Mohamed NA, Tan MJ, Leong KF (2017) 3D printing trends in building and construction industry: a review. Virtual Phys Prototyp 12(3):261–276. https://doi.org/10.1080/17452759.2017.1326724CrossRef

17.

Sano Y, Matsuzaki R, Ueda M, Todoroki A, Hirano Y (2018) 3D printing of discontinuous and continuous fibre composites using stereolithography. Addit Manuf 24:521–527. https://doi.org/10.1016/j.addma.2018.10.033CrossRef

18.

Ueda M, Kishimoto S, Yamawaki M et al (2020) 3D compaction printing of a continuous carbon fiber reinforced thermoplastic. Compos Part A Appl Sci Manuf 137(April):105985. https://doi.org/10.1016/j.compositesa.2020.105985CrossRef

19.

Wang X, Jiang M, Zhou Z, Gou J, Hui D (2017) 3D printing of polymer matrix composites: a review and prospective. Compos B Eng 110:442–458. https://doi.org/10.1016/j.compositesb.2016.11.034CrossRef

20.

Quan C, Han B, Hou Z, Zhang Q, Tian X, Lu TJ (2020) 3d printed continuous fiber reinforced composite auxetic honeycomb structures. Compos B Eng 187:107858. https://doi.org/10.1016/J.COMPOSITESB.2020.107858CrossRef

21.

Yang Y, Chen Z, Song X et al (2017) Biomimetic anisotropic reinforcement architectures by electrically assisted nanocomposite 3D printing. Adv Mater 29(11):1–8. https://doi.org/10.1002/adma.201605750CrossRef

22.

Ehrmann G, Ehrmann A (2020) Shape-memory properties of 3D printed PLA structures. Proceedings 2021, Vol 69, Page 6 69(1):6 https://doi.org/10.3390/CGPM2020-07198

23.

Yang C, Tian X, Liu T, Cao Y, Li D (2017) 3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance. Rapid Prototyp J 23(1):209–215. https://doi.org/10.1108/RPJ-08-2015-0098/FULL/PDFCrossRef

24.

Le Duigou A, Correa D, Ueda M, Matsuzaki R, Castro M (2020) A review of 3D and 4D printing of natural fibre biocomposites. Mater Des 194:108911. https://doi.org/10.1016/J.MATDES.2020.108911CrossRef

25.

Deng S, Wu J, Dickey MD et al (2019) Rapid open-air digital light 3D printing of thermoplastic polymer. Adv Mater 31(39):1903970. https://doi.org/10.1002/ADMA.201903970CrossRef

26.

Chen Q, Cao PF, Advincula RC, Chen Q, Advincula RC, Cao Pf (2018) Mechanically robust, ultraelastic hierarchical foam with tunable properties via 3D printing. Adv Funct Mater 28(21):1800631. https://doi.org/10.1002/ADFM.201800631CrossRef

27.

Manapat JZ, Mangadlao JD, Tiu BDB, Tritchler GC, Advincula RC (2017) High-strength stereolithographic 3D printed nanocomposites: graphene oxide metastability. ACS Appl Mater Interfaces 9(11):10085–10093. https://doi.org/10.1021/ACSAMI.6B16174/SUPPL_FILE/AM6B16174_SI_001.PDFCrossRef

28.

Ye G, Bi H, Hu Y (2020) Compression behaviors of 3D printed pyramidal lattice truss composite structures. Compos Struct 233:111706. https://doi.org/10.1016/J.COMPSTRUCT.2019.111706CrossRef

29.

Bekas DG, Hou Y, Liu Y, Panesar A (2019) 3D printing to enable multifunctionality in polymer-based composites: a review. Compos B Eng 179 https://doi.org/10.1016/j.compositesb.2019.107540

30.

Gong X, Zhang H, Sun Z et al (2020) A viable method to enhance the electrical conductivity of CNT bundles: direct in situ TEM evaluation. Nanoscale 12(24):13095–13102. https://doi.org/10.1039/D0NR01459ACrossRef

31.

Ravindranath PK, Roy S, Unnikrishnan V et al (2019) A multiscale model to study the enhancement in the compressive strength of multi-walled CNT sheet overwrapped carbon fiber composites. Compos Struct 219(July):170–178. https://doi.org/10.1016/j.compstruct.2019.03.065CrossRef

32.

Song Y, Zheng N, Dong X, Gao J (2020) Flexible carboxylated CNT/PA66 nanofibrous mat interleaved carbon fiber/epoxy laminates with improved interlaminar fracture toughness and flexural properties. Ind Eng Chem Res 59(3):1151–1158. https://doi.org/10.1021/acs.iecr.9b05854CrossRef

33.

Markforged Inc Global Headquarter (2020) Datasheet-mark two continuous fiber 3D-printer. 480 Pleasant St, Watertown, MA 02472

34.

Stephen T, James G (1963) Theory of elastic stability. 2nd ed. McGraw-hill International Book Company, 8787 Orion Place Columbus, OH 43240

35.

ASTM International. ASTM D6641 / D6641M - 16e2 standard test method for compressive properties of polymer matrix composite materials using a combined loading compression (CLC) test fixture. https://www.astm.org/Standards/D6641. Accessed 5 May 2021

Titel: Enhanced buckling strength of the thin-walled continuous carbon fiber–reinforced thermoplastic composite through dual coaxial nozzles material extrusion process
verfasst von: Dongyang Cao
Publikationsdatum: 25.07.2023
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 3-4/2023
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-023-12014-8

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3-4/2023

Simulation of machining behaviour of two-phase brittle materials during grinding by modelling single-grain scratching using a combination of FE and SPH methods

Investigation of cutting mechanism and residual stress state with grooved grinding wheels

Research on ultrasonic vibration–assisted micro-EDM milling of microgrooves with large aspect ratio

Monitoring melted state of reinforced particle in metal matrix composite fabricated by laser melt injection using optical camera

Investigation of interfacial microstructure and mechanical characteristics of Ti/SS316 clads fabricated by explosive welding process

An IoT system for managing machine tool spindles in operation

Premium Partner

Marktübersichten