nach oben

Polymer Bulletin

Erschienen in:

05.05.2022 | Original Paper

Thermal, structural and morphological properties of polypropylene and high density polyethylene polymer composites filled with waste urea formaldehyde

verfasst von: Özlem Yağci, Beril Eker Gümüş, Münir Taşdemir

Erschienen in: Polymer Bulletin | Ausgabe 4/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Polypropylene (PP) and high-density polyethylene (HDPE) are the recyclable and easily processed thermoplastics which are commonly used as cable insulation materials. The improvement of thermal and structural properties of PP and HDPE is very important for aging processes. For this purpose, powdered waste urea–formaldehyde was added to PP and HDPE at 5 wt%, 10 wt%, 20 wt% and 30 wt% ratios. The thermal, structural and morphological properties of the produced samples were observed by using thermogravimetric differential thermal analyser, oxygen induction time tests, fourier transform infrared spectrophotometry, X-ray diffractometer and scanning electron microscopy. By the results of the relevant study, the thermal and oxidative stability of the composites was improved by the incorporation of WUF into the polymer matrices. In conclusion, powdered urea–formaldehyde can be a cost-effective and good filler for PP and HDPE.

Vorheriger Artikel Rheological properties and UV photo-oxidation of montmorillonite-filled random propylene–ethylene copolymers

Nächster Artikel A novel composite epoxy resin toughened by epoxy-terminated phenyl tris(dimethylsiloxy)silane at low temperature

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Zurina M, Ismail H, Ratnam CT (2007) Characterization of unvulcanized and dynamically vulcanized ENR-50/EVA blends. Polym Plast Technol 47:1–12. https://doi.org/10.1080/03602550701575938CrossRef

Wang W, Yang S, Liu H et al (2022) A novel multifunctional fertilizer derived from wasted straw: synthesis, characteristics and agriculture applications. Ind Crops Prod 176:114308. https://doi.org/10.1016/J.INDCROP.2021.114308CrossRef

Peydro MA, Parres F, Crespo JE, Navarro R (2013) Recovery of recycled acrylonitrile–butadiene–styrene, through mixing with styrene–ethylene/butylene–styrene. J Mater Process Technol 213:1268–1283. https://doi.org/10.1016/J.JMATPROTEC.2013.02.012CrossRef

Mohamad Z, Ismail H, Chantara Thevy R (2006) Characterization of epoxidized natural rubber/ethylene vinyl acetate (ENR-50/EVA) blend: effect of blend ratio. J Appl Polym Sci 99:1504–1515. https://doi.org/10.1002/APP.22154CrossRef

Thomas R, Vijayan P, Thomas S (2012) Recycling of thermosetting polymers: their blends and composites. Recent Dev Polym Recycl 121:153

Panasonic life solutions | About us. https://lstr.panasonic.com/en/corporate/about-us-1/. Accessed 13 Mar 2022

Matuana LM, Jin S, Stark NM (2011) Ultraviolet weathering of HDPE/wood-flour composites coextruded with a clear HDPE cap layer. Polym Degrad Stab 96:97–106. https://doi.org/10.1016/j.polymdegradstab.2010.10.003CrossRef

Bliznakov ED, White CC, Shaw MT (2000) Mechanical properties of blends of HDPE and recycled urea–formaldehyde resin. J Appl Polym Sci 77:3220–3227. https://doi.org/10.1002/1097-4628CrossRef

Akpabio UD (2010) Retention of urea–formaldehyde resin finish on cellulosic fabric and its effect on water absorbent capacity of the treated fabric. Int J Adv Sci Tech Res 2(5):31–39

10.

Luongo JP (1960) Infrared study of polypropylene. J Appl Polym Sci 3:302–309. https://doi.org/10.1002/app.1960.070030907CrossRef

11.

Sakai K, Sobue H (1972) Study of structure and thermal properties of polypropylene and chlorinated polypropylene by infrared spectroscopy and differential scanning calorimetry. J Appl Polym Sci 16:2657–2670. https://doi.org/10.1002/app.1972.070161018CrossRef

12.

Cran MJ, Bigger SW (2003) Quantitative analysis of polyethylene blends by fourier transform infrared spectroscopy. Appl Spectrosc 57(8):928–932CrossRefPubMed

13.

Karian HG (2003) Handbook of polypropylene and polypropylene composites. Marcel Dekker, New YorkCrossRef

14.

Karger-Kocsis J (1995) Polypropylene: structure, blends and composites. Chapman & Hall, LondonCrossRef

15.

Kaempfer D, Thomann R, Mülhaupt R (2002) Melt compounding of syndiotactic polypropylene nanocomposites containing organophilic layered silicates and in situ formed core/shell nanoparticles. Polym (Guildf) 43:2909–2916. https://doi.org/10.1016/S0032-3861(02)00113-1CrossRef

16.

Samaržija-Jovanović S, Jovanović V, Jovanović T et al (2022) Hydrolytic, thermal and radiation stability of modified urea–formaldehyde composites: influence of montmorillonite particle size. Int J Adhes Adhes 115:103131. https://doi.org/10.1016/J.IJADHADH.2022.103131CrossRef

17.

Dao NL, Lewin PL, Hosier IL, Swingler SG (2010) A comparison between LDPE and HDPE cable insulation properties following lightning impulse ageing. In Proceedings 2010 IEEE international conference on solid dielectrics ICSD

18.

Cao X, Andritsch T (2019) Modification of polypropylene-based cable insulation material. DEStech Trans Eng Technol Res. https://doi.org/10.12783/DTETR/EEEC2018/26871

19.

Benli M, Gümüş BE, Kahraman Y et al (2021) Thermal, structural and morphological characterization of dental polymers for clinical applications. J Prosthodont Res 65:176–185. https://doi.org/10.2186/JPR.JPOR_2019_534CrossRefPubMed

20.

Chiang TC, Hamdan S, Osman MS (2016) Urea formaldehyde composites reinforced with sago fibres analysis by FTIR, TGA, and DSC. Adv Mater Sci Eng. https://doi.org/10.1155/2016/5954636CrossRef

21.

Luo J, Zhang J, Luo J et al (2015) Effect of melamine allocation proportion on chemical structures and properties of melamine-urea-formaldehyde resins. BioResources 10:3265–3276. https://doi.org/10.15376/BIORES.10.2.3265-3276CrossRef

22.

Gumu BE, Yagci O, Erdogan DC, Tademir M (2019) Dynamical mechanical properties of polypropylene composites filled with olive pit particles. J Test Eval 47:2551–2561. https://doi.org/10.1520/JTE20180198CrossRef

23.

Gopanna A, Mandapati RN, Thomas SP et al (2019) Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy and wide-angle X-ray scattering (WAXS) of polypropylene (PP)/cyclic olefin copolymer (COC) blends for qualitative and quantitative analysis. Polym Bull 76:4259–4274. https://doi.org/10.1007/s00289-018-2599-0CrossRef

24.

Andreassen E (1999) Infrared and Raman spectroscopy of polypropylene. Springer, Dordrecht, pp 320–328

25.

Prasad A (1998) A quantitative analysis of low density polyethylene and linear low density polyethylene blends by differential scanning calorimetery and fourier transform infrared spectroscopy methods. Polym Eng Sci 38:1716–1728. https://doi.org/10.1002/pen.10342CrossRef

26.

Perumal Ramasamy R, Yang K, Rafailovich MH (2014) Polypropylene-graphene-a nanocomposite that can be converted into a meta-material at desired frequencies. RSC Adv 4:44888–44895. https://doi.org/10.1039/C4RA05814CCrossRef

27.

Kodal M, Üniversitesi K, Mühendisliği Bölümü K (2018) Dinamik olarak vulkanize edilmiş PP/SR harmanlarının mekanik, ısıl ve morfolojik özelliklerinin incelenmesi. Dicle Üniv Mühendis Fak Mühendis Derg 9(1):325–335

28.

Lapčík L, Vašina M, Lapčíková B et al (2020) Study of the material engineering properties of high-density poly(ethylene)/perlite nanocomposite materials. Nanotechnol Rev 9:1491–1499. https://doi.org/10.1515/NTREV-2020-0113/MACHINEREADABLECITATION/RISCrossRef

29.

Szczepaniak R, Komorek A, Przybyłek P et al (2022) Research into mechanical properties of an ablative composite on a polymer matrix base with aerogel particles. Compos Struct 280:114855. https://doi.org/10.1016/J.COMPSTRUCT.2021.114855CrossRef

30.

Shin YK, Lee WS, Yoo MJ, Kim S (2013) CERAMICS Effect of BN filler on thermal properties of HDPE matrix composites. Ceram Int 39:S569–S573. https://doi.org/10.1016/j.ceramint.2012.10.137CrossRef

31.

Vaggar GB, Sirimani VB, Sataraddi DP, Hiremath NM, Bhajantri F (2021) Effect of filler materials on thermal properties of polymer composite materials: a review. Int J Eng Res Technol (IJERT) 10:08

32.

Abdelrazek EM, Elashmawi IS (2008) Characterization and physical properties of CoCl₂ filled polyethyl-methacrylate films. Polym Compos 29:1036–1043. https://doi.org/10.1002/PC.20481CrossRef

33.

Yağci Ö, Eker Gümüş B, Taşdemir M (2020) Thermal, structural and dynamical mechanical properties of hollow glass sphere-reinforced polypropylene composites. Polym Bull. https://doi.org/10.1007/s00289-020-03257-6CrossRef

34.

Niu P, Liu B, Wei X et al (2011) Study on mechanical properties and thermal stability of polypropylene/hemp fiber composites. J Reinf Plast Compos 30:36–44. https://doi.org/10.1177/0731684410383067CrossRef

35.

Liu M, Thirumalai RVKG, Wu Y, Wan H (2017) Characterization of the crystalline regions of cured urea formaldehyde resin. RSC Adv 7:49536–49541. https://doi.org/10.1039/c7ra08082dCrossRef

36.

Jain K, Madhu G, Bhunia H et al (2015) Physico-mechanical characterization and biodegradability behavior of polypropylene/poly(L-lactide) polymer blends. J Polym Eng 35:407–415. https://doi.org/10.1515/POLYENG-2014-0179/PDFCrossRef

37.

Chatterjee A, Kumar S, Singh H (2020) Tensile strength and thermal behavior of jute fibre reinforced polypropylene laminate composite. Compos Commun 22:100483. https://doi.org/10.1016/J.COCO.2020.100483CrossRef

38.

Gümüş BE, Yağci Ö, Taşdemir M (2022) High-density polyethylene/artichoke leaf powder polymer composites: dynamic mechanical, morphological and thermal properties. Iran Polym J 1:1–11. https://doi.org/10.1007/S13726-022-01031-1CrossRef

39.

Benabid F, Kharchi N, Zouai F et al (2019) Impact of co-mixing technique and surface modification of ZnO nanoparticles using stearic acid on their dispersion into HDPE to produce HDPE/ZnO nanocomposites. Polym Polym Compos 27:389–399. https://doi.org/10.1177/0967391119847353CrossRef

40.

Olesik P, Godzierz M, Kozioł M et al (2021) Structure and mechanical properties of high-density polyethylene composites reinforced with glassy carbon. Materials 14(14):4024. https://doi.org/10.3390/MA14144024CrossRefPubMedPubMedCentral

41.

Prabowo I, Nur Pratama J, Chalid M (2017) The effect of modified ijuk fibers to crystallinity of polypropylene composite. IOP Conf Ser Mater Sci Eng. https://doi.org/10.1088/1757-899X/223/1/012020CrossRef

42.

Chen K, Cheng X, Chen Y et al (2021) Thermal degradation kinetics of urea–formaldehyderesins modified by almond shells. ACS Omega 6:25702. https://doi.org/10.1021/ACSOMEGA.1C03896CrossRefPubMedPubMedCentral

43.

Yunus NYM, Abdullah ZA (2019) Analysıs of urea formaldehyde and urea-formaldehyde-acrylamıde resıns usıng thermogravımetrıc method. Gading J Sci Technol 2:1–8

44.

Wahab R, Dom SMM, Mustafa MT et al (2015) Properties of empty fruit bunch oil palm (Elaeis guineesis) composite boards at different densities and resin contents. J Plant Sci 10:179–190. https://doi.org/10.3923/jps.2015.179.190CrossRef

45.

Li J, Wang Y, Wang X, Wu D (2019) Crystalline characteristics, mechanical properties, thermal degradation kinetics and hydration behavior of biodegradable fibers melt-spun from polyoxymethylene/poly(l-lactic acid) blends. Polymer (Basel). https://doi.org/10.3390/POLYM11111753CrossRefPubMedCentral

46.

Schmid M, Affolter S (2003) Interlaboratory tests on polymers by differential scanning calorimetry (DSC): determination and comparison of oxidation induction time (OIT) and oxidation induction temperature (OIT). Polym Test 22:419–428. https://doi.org/10.1016/S0142-9418(02)00122-8CrossRef

47.

Oxidative induction times (OIT) testing by differential scanning calorimetry. https://www.intertek.com/analytical-laboratories/oit-dsc/. Accessed 13 Mar 2022

48.

US7238765B2 - High density polyethylene and insulation compositions for wire and cable - Google Patents. https://patents.google.com/patent/US7238765B2/en. Accessed 12 Mar 2022

49.

Jenkins MJ, Harrison KL (2008) The effect of crystalline morphology on the degradation of polycaprolactone in a solution of phosphate buffer and lipase. Polym Adv Technol 19:1901–1906. https://doi.org/10.1002/PAT.1227CrossRef

Titel: Thermal, structural and morphological properties of polypropylene and high density polyethylene polymer composites filled with waste urea formaldehyde
verfasst von: Özlem Yağci
Beril Eker Gümüş
Münir Taşdemir
Publikationsdatum: 05.05.2022
Verlag: Springer Berlin Heidelberg
Erschienen in: Polymer Bulletin / Ausgabe 4/2023
Print ISSN: 0170-0839
Elektronische ISSN: 1436-2449
DOI: https://doi.org/10.1007/s00289-022-04245-8

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2023

Experimental and computational study of the thermal conductivity of polymeric micro spheres/polyester thermal insulating coatings

Highly sensitive, stretchable, piezoresistive auxetic sensor based on graphite powders sandwiched between silicon rubber layers

Cyclic voltammetry and XPS studies of poly (aniline-co-3-aminophenol)

Investigation of properties and applications of ZnO polymer nanocomposites

The influence of ammonium and phosphonium salts on natural rubber vulcanization with experimental and commercial accelerators

Multi-walled carbon nanotubes/polypyrrole nanocomposite, synthesized through an eco-friendly route, as a prospective drug delivery system

Premium Partner

Marktübersichten