nach oben

Bulletin of Engineering Geology and the Environment

Erschienen in:

01.05.2014 | Original Paper

Petrophysical properties and durability of granites employed as building stone: a comprehensive evaluation

verfasst von: Luís M. O. Sousa

Erschienen in: Bulletin of Engineering Geology and the Environment | Ausgabe 2/2014

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The use of a rock as a building stone is conditioned by several factors, from its aesthetic characteristics to its petrophysical properties. Even though the latter are taken into consideration, only a few of them are usually assessed. The purpose of this study is to carry out a comprehensive evaluation of the petrophysical properties of nine Portuguese granites employed as dimension stones. Granites with different textural characteristics and degrees of weathering were selected in order to highlight the relationships between the properties, and to identify the most important ones affecting the rock behaviour. The post-tectonic granites, with low porosity and fewer fissures, show better mechanical behaviour, while the most weathered granites have poor mechanical behaviour that limits their use in some applications and/or environmental conditions.

Vorheriger Artikel A novel geometric approach for 3-D geological modelling

Nächster Artikel “Plagioclase solution degree index”: a new index to evaluate the weathering degree of granite

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Aigbedion I (2007) Potential for rock-polishing enterprises in southwestern Nigeria. Environ Geol 52:715–718

Akkoyun O, Toprak ZF (2012) Fuzzy-based quality classification model for natural building stone blocks. Eng Geol 133–134:66–75

Alonso FJ, Ordaz J, Valdeón L, Esbert RM (1987) Revisión crítica del ensayo de cristalización de sales. Mater Construcc 37(206):53–60

Andrade PS, Saraiva AA (2010) Physical and mechanical characterization of phyllites and metagreywackes in central Portugal. Bull Eng Geol Environ 69:207–214

Angeli M, Bigas J-P, Benavente D, Menéndez B, Hébert R, David C (2007) Salt crystallization in pores: quantification and estimation of damage. Environ Geol 52:205–213

Angeli M, Benavente D, Bigas J-P, Menéndez B, Hébert R, David C (2008) Modification of the porous network by salt crystallization in experimentally weathered sedimentary stones. Mater Struct 41:1091–1108

Antão AMC, Rodrigues CMG (2000) Avaliação da influência da porosidade e granulometria na alterabilidade de granitos da Guarda. In: Sociedade Portuguesa de Geotecnia, Faculdade de Engenharia da Universidade do Porto, editors. Actas do VII Congresso Nacional de Geotecnia, Porto, vol 1, pp 3–10

Arikan F, Ulusay R, Aydin N (2007) Characterization of weathered acidic volcanic rocks and a weathering classification based on a rating system. Bull Eng Geol Environ 66(4):415–430

Arman H, Ramazanoglu S, Akinci A (2007) Mechanical and physical properties of the Kandira stone, Kandira, Turkey. Bull Eng Geol Environ 66:331–333

ASTM (2000) Standard test method for laboratory determination of pulse velocities and ultrasonic elastic constants of rock. ASTM-D2845-00, American Society for Testing and Materials, pp 7

Aydin A (2009) ISRM suggested method for determination of the Schmidt hammer rebound hardness: revised version. Int J Rock Mech Min Sci 46:627–634

Aydin A, Basu A (2005) The Schmidt hammer in rock material characterization. Eng Geol 81:1–14

Azzoni A, Bailo F, Rondena E, Zaninetti A (1992) Mechanical, chemical and petrographical evaluation of stone degradation induced by different laboratory techniques. In: Delgado Rodrigues et al (eds) Proceedings of 7th international congress on deterioration and conservation of stone, Lisbon, pp 827–836

Basu A, Aydin A (2004) A method for normalization of Schmidt hammer rebound values. Int J Rock Mech Min Sci 41:1211–1214

Basu A, Celestino TB, Bortolucci AA (2009) Evaluation of rock mechanical behaviors under uniaxial compression with reference to assessed weathering grades. Rock Mech Rock Eng 42:73–93

Begonha A (2009) Mineralogical study of the deterioration of granite stones of two Portuguese churches and characterization of the salt solutions in the porous network by the presence of diatoms. Mat Charact 60:621–635

Benavente D, García del Cura MA, Fort R, Ordóñez S (2004) Durability estimation of porous building stones from pore structure and strength. Eng Geol 74:113–127

Benavente D, Martínez-Martínez J, Cueto N, García-del-Cura MA (2007) Salt weathering in dual-porosity building dolostones. Eng Geol 94:215–226

Brea TR, Lamas BP, Hermo BS (2008) Artificial weathering of granite. Mater Construcc 58(289–290):179–189

Buyuksagisa IS, Goktanb RM (2007) The effect of Schmidt hammer type on uniaxial compressive strength prediction of rock. Int J Rock Mech Min Sci 44:299–307

Carvalho JF, Henriques P, Falé P, Luís G (2008) Decision criteria for the exploration of ornamental-stone deposits: application to the marbles of the Portuguese Estremoz Anticline. Int J Rock Mech Min Sci 45(8):1306–1319

CEN (2004) Natural stones—determination of abrasion. EN 14157. European Standard, p 19

Ceryan S, Tudes S, Ceryan N (2008a) A new quantitative weathering classification for igneous rocks. Environ Geol 55:1319–1336

Ceryan S, Tudes S, Ceryan N (2008b) Influence of weathering on the engineering properties of Harsit granitic rocks (NE Turkey). Bull Eng Geol Environ 67:97–104

Chaki S, Takarli M, Agbodjan WP (2008) Influence of thermal damage on physical properties of a granite rock: porosity, permeability and ultrasonic wave evolutions. Constr Build Mater 22(7):1456–1461

Çoganoğlu I, Çelik SB (2008) Estimation of uniaxial compressive strength from point load strength, Schmidt hardness and P-wave velocity. Bull Eng Geol Environ 67:491–498

Conca JL, Cubba R (1986) Abrasion resistance hardness testing of rock materials. Int J Rock Mech Min Sci Geomech Abstr 23:141–149

Cultrone G, Russo LG, Calabrò C, Uroševič M, Pezzino A (2008) Influence of pore system characteristics on limestone vulnerability: a laboratory study. Environ Geol 54:1271–1281

Diamantis K, Gartzos E, Migiros G (2009) Study on uniaxial compressive strength, point load strength index, dynamic and physical properties of serpentinites from Central Greece: test results and empirical relations. Eng Geol 108:199–207

Dwivedia RD, Goela RK, Prasada VVR, Sinhab A (2008) Thermo-mechanical properties of Indian and other granites. Int J Rock Mech Min Sci 45:303–315

Eren O, Bahali M (2005) Some engineering properties of natural building cut stones of Cyprus. Constr Build Mater 19:213–222

Ericson K (2004) Geomorphological surfaces of different age and origin in granite landscapes: an evaluation of the Schmidt hammer test. Earth Surf Process Landf 29:495–509

Fener M, Ince I (2012) Influence of orthoclase phenocrysts on point load strength of granitic rocks. Eng Geol 141–142:24–32

Fener M, Kahraman S, Bilgil A, Gunaydin O (2005) A comparative evaluation of indirect methods to estimate the compressive strength of rocks. Rock Mech Rock Eng 38(4):329–343

Fookes PG, Gourley CS, Ohikere C (1988) Rock weathering in engineering time. Q J Eng Geol Hydrogeol 21:33–57

Fort R, Buergo MA, Perez-Monserrat E, Varas MJ (2010) Characterisation of monzogranitic batholiths as a supply source for heritage construction in the northwest of Madrid. Eng Geol 115(3):149–157

Frascá MHBO, Yamamoto JK (2006) Ageing tests for dimension stone—experimental studies of granitic rocks from Brazil. In: Proceedings 10th IAEG international congress. The Geological Society of London, IAEG2006 Paper number 224

García BP (1992) Evaluación “in situ” de la alteración de rocas monumentales graníticas mediante ultrasonidos. PhD Dissertation, University of Oviedo

García-del-Cura MA, Benavente D, Bernabéu A, Martínez-Martínez J (2008) The effect of surface finishes on outdoor granite and limestone pavers. Mater Construcc 58(289–290):65–79

Gómez-Heras M, Smith BJ, Fort R (2006) Surface temperature differences between minerals in crystalline rocks: implications for granular disaggregation of granites through thermal fatigue. Geomorphology 78:236–249

Gupta V (2009) Non-destructive testing of some Higher Himalayan Rocks in the Satluj Valley. Bull Eng Geol Environ 68:409–416

Gupta AS, Rao KS (2000) Weathering effects on the strength and deformational behaviour of crystalline rocks under uniaxial compression state. Eng Geol 56:257–274

Gupta V, Sharma R (2012) Relationship between textural, petrophysical and mechanical properties of quartzites: a case study from northwestern Himalaya. Eng Geol 135–136:1–9

Gürer A, Bayrak M, Gürer ÖF, Şahin SY (2008) Deliniation of weathering in the Çatalca granite quarry with the very low frequency (VLF) electromagnetic method. Pure Appl Geophys 165:429–441

Hall K, Arocena JM, Boelhouwers J, Liping Z (2005) The influence of aspect on the biological weathering of granites: observations from the Kunlun Mountains, China. Geomorphology 67:71–188

Haskins D (2006) Chemical and mineralogical weathering indices as applied to a granite saprolite in South Africa. In: Proceedings 10th IAEG international congress. The Geological Society of London, IAEG2006 Paper number 465

Hoseinie SH, Ataei M, Osanloo M (2009) A new classification system for evaluating rock penetrability. Int J Rock Mech Min Sci 46(8):1329–1340

Hyslop EK, Albornoz-Parra L (2008) Developing a future repairs strategy for a sandstone city: a petrographic investigation of building stone in Glasgow, Scotland. Mater Charact 60:636–643

Ihalainen PE, Uusinoka RPJ (1994) Comparison of weathering resistance of some building stones based on treatments simulating differente external conditions. In Oliveira R et al (eds) Proceedings of the 7th international IAEG congress, pp 3613–3618

Ingham JP (2005) Predicting the frost resistance of building stone. Q J Eng Geol Hydrogeol 38:387–399

Ismael IS, Hassan MS (2008) Characterization of some Egyptian serpentinites used as ornamental stones. Chin J Geochem 27:140–149

ISRM (1978) Suggested methods for determining hardness and abrasiveness of rocks. Int J Rock Mech Min Sci Geomech Abstr 15:89–97

ISRM (1981) Basic geotechnical description of rock masses. International Society of Rock Mechanics, Commission on the Classification of Rock and Rock Masses. Int J Rock Mech Min Sci Geomech Abstr 18:85–110

Kahraman S (2001) A correlation between P-wave velocity, number of joints and Schmidt hammer rebound number. Int J Rock Mech Min Sci 38:729–733

Kahraman S (2002) Estimating the direct P-wave velocity value of intact rock from indirect laboratory measurements. Int J Rock Mech Min Sci 39:101–104

Kahraman S (2007) The correlations between the saturated and dry P-wave velocity of rocks. Ultrasonics 46:341–348

Kahraman S, Gunaydin O (2007) Empirical methods to predict the abrasion resistance of rock aggregates. Bull Eng Geol Environ 66(4):449–455

Kao C-S, Carvalho FCS, Labuz JF (2011) Micromechanisms of fracture from acoustic emission. Int J Rock Mech Min Sci 48:666–673

Karaca Z, Yılmaz NG, Goktan RM (2012) Considerations on the European Standard EN 14157 test methods: abrasion resistance of natural stones used for flooring in buildings. Rock Mech Rock Eng 45:103–111

Katz O, Reches Z, Roegiers J-C (2000) Evaluation of mechanical rock properties using a Schmidt Hammer. Int J Rock Mech Min Sci 37:723–728

Kayabali K, Selcuk L (2010) Nail penetration test for determining the uniaxial compressive strength of rock. Int J Rock Mech Min Sci 47(2):265–272

Kılıç A, Teymen AA (2008) Determination of mechanical properties of rocks using simple methods. Bull Eng Geol Environ 67:237–244

Kolaitai E, Papadopoulos Z (1993) Evaluation of Schmidt rebound hammer testing: a critical approach. Bull IAEG 48:67–76

Kramadibrata S, Simangunsong GM, Matsui K, Shimada H (2011) Role of acoustic emission for solving rock engineering problems in Indonesian underground mining. Rock Mech Rock Eng 44:281–289

Labus M (2008) Evaluation of weathering-resistance classes in clastic rocks on the example of Polish sandstones. Environ Geol 54:283–289

Lama RD, Vutukuri VS (1978) Handbook on mechanical properties—testing technics and results, vol II. Trans Tech Publications, Clausthal

Li YH, Liu JP, Zhao XD, Yang YJ (2010) Experimental studies of the change of spatial correlation length of acoustic emission events during rock fracture process. Int J Rock Mech Min Sci 47:1254–1262

Lin QX, Liu YM, Tham LG, Tang CA, Lee PKK, Wang J (2009) Time-dependent strength degradation of granite. Int J Rock Mech Min Sci 46:1103–1114

Lindqvist JE, Akesson U, Malaga K (2007) Microstructure and functional properties of rock materials. Mater Charact 58:1183–1188

Luodes H, Selenon O, Pääkkönen K (2000) Evaluation of dimension stone in gneissic rock—a case history from southern Finland. Eng Geol 52:209–223

Mahmutoğlu Y (2006) The effects of strain rate and saturation on a micro-cracked marble. Eng Geol 82:137–144

Marini P, Bellopede R, Perino L, Regibus C (2011) Optimisation of an abrasion resistance test method on natural stones. Bull Eng Geol Environ 70:133–138

Martínez-Martínez J, Benavente D, García-del-Cura MA (2012) Comparison of the static and dynamic elastic modulus in carbonate rocks. Bull Eng Geol Environ 71(2):263–268

Moreiras STF, Paraguassú AB, Ribeiro RP (2007) Dimension stone for building façades: methodology for structural design. Bull Eng Geol Environ 67:53–57

Nasseri MHB, Mohanty B (2008) Fracture toughness anisotropy in granitic rocks. Int J Rock Mech Min Sci 45:167–193

Nespereira J, Blanco JA, Yenes M, Pereira D (2009) Irregular silica cementation in sandstones and its implication on the usability as building stone. Eng Geol 115(3):167–174

Ortiz MAP (1996) Características intrínsecas y parámetros fractográficos que condicionan la alteración del granito. PhD Dissertation, University of Oviedo

Park HD, Kim SS, Chon HT (1998) Durability of ornamental stone exposed to various weathering environments in Korea. In: Moore DP, Hungr O (eds) Proceedings of the 8th international congress of IAEG, Balkema, pp 2953–2955

Prikryl R, Lokajícek T, Li C, Rudajev V (2003) Acoustic emission characteristics and failure of uniaxially stressed granitic rocks: the effect of rock fabric. Rock Mech Rock Eng 36(4):255–270

Quick GW, Sirivivatnanon V (2008) Predicting iron staining of siderite-bearing microsyenites intended for dimension stone use. Constr Build Mater 22:257–263

Ray AK, Singh GSP, Banerjee G (2006) Influence of petrographic constituents on the softening characteristics of Coal Measures rocks. Int J Rock Mech Min Sci 43:494–502

Reuschlé T, Haore SG, Darot M (2006) The effect of heating on the microstructural evolution of La Peyratte granite deduced from acoustic velocity measurements. Earth Plan Sci Lett 243:692–700

Rigopoulos I, Tsikouras B, Panagiotis Pomonis P, Hatzipanagiotou K (2010) The influence of alteration on the engineering properties of dolerites: the examples from the Pindos and Vourinos ophiolites (northern Greece). Int J Rock Mech Min Sci 47:69–80

RILEM (1980) Essais recommandés pour mesurer l’altération des pierres et évaluer l’efficacité des méthodes de traitemente. Matériaux et Constructions 75:175–253

Rivas T, Prieto B, Silva B (2000) Influence of rift and bedding plane on the physico-mechanical properties of granitic rocks. Implications for the deterioration of granitic monuments. Build Environ 35:387–396

Rodríguez-Rey A, Montoto A, Calleja L, Ruiz de Argandoña VG, Suárez del Río LM (1986) Control de artefactos desarrollados en la preparación de muestras rocosas para SEM. In: Bravo AL, Aballe M (eds) Proceedings of yhe Congreso Nacional de Microscopia Electrónica, pp 88–92

Seo YS, Jeong C, Kim JS, Ichikawa Y (2002) Microscopic observation and contact stress analysis of granite under compression. Eng Geol 63:259–275

Sevilla BJ, Garcia MRR, Perza IM (1995) Características térmicas de rocas ornamentales. Coeficiente de dilatación. Rev Edif 21:66

Shalabi FI, Cording EJ, Al-Hattamleh OH (2007) Estimation of rock engineering properties using hardness tests. Eng Geol 90:138–147

Sharma PK, Singh TN (2008) A correlation between P-wave velocity, impact strength index, slake durability index and uniaxial compressive strength. Bull Eng Geol Environ 67:17–22

Sharma PK, Khandelwal M, Singh TN (2011) A correlation between Schmidt hammer rebound numbers with impact strength index, slake durability index and P-wave velocity. Int J Earth Sci (Geol Rundsch) 100:189–195

Siegesmund S, Dürrast H (2011) Physical and mechanical properties of rocks. In: Siegesmund S, Snethlage R (eds) Stone in architecture—properties, durability, 4th edn. Springer, Berlin, pp 97–226

Siegesmund S, Török A (2011) Building stones. In: Siegesmund S, Snethlage R (eds) Stone in architecture—properties, durability, 4th edn. Springer, Berlin, pp 11–96

Silva ZSG, Simão JAR (2009) The role of salt fog on alteration of dimension stone. Constr Build Mater 23:3321–3327

Smith BJ, Přikryl R (2007) Diagnosing decay: the value of medical analogy in understanding the weathering of building stones. Geol Soc Lond Special Publ 271:1–8

Sonmez H, Tuncay E, Gokceoglu C (2004) Models to predict the uniaxial compressive strength and the modulus of elasticity for Ankara Agglomerate. Int J Rock Mech Min Sci 41(5):717–729

Soriano RV, Lado MMC (1998) El revestimiento petreo en fachadas ventiladas de edificios. In: Federación Española de la Piedra Natural (ed) Proc II Congresso Internacional de la Piedra, Madrid, p 11

Soroush H, Fahimifar A (2003) Evaluation of some physical and mechanical properties of rocks using ultrasonic pulse technique and presenting equations between dynamic and static elastic constants. In: Technology roadmap for rock mechanics (Proceedings of the 10th congress of the ISRM). South African Institute of Mining and Metallurgy; vol 2, pp 1113–1118

Sousa LMO (2000) Estudo da fracturação e das características físico-mecânicas de granitos da região de Trás-os-Montes com vista à sua utilização como rocha ornamental. PhD Dissertation, University of Trás-os-Montes e Alto Douro (Portugal)

Sousa LMO (2007) Granite fracture index to check suitability of granite outcrops for quarrying. Eng Geol 92(3–4):146–159

Sousa LMO (2010) Evaluation of joints in granitic outcrops for dimension stone exploitation. Q J Eng Geol Environ 42:85–94

Sousa LMO (2013) The influence of the characteristics of quartz and mineral deterioration on the strength of granitic dimensional stones. Environ Earth Sci 69(4):1333–1346

Sousa LMO, Gonçalves BMM (2012) Color assessment of granitic rocks and implications for their ornamental utilization. Color Res Appl 37(5):375–383

Sousa LMO, Gonçalves BMM (2013) Differences in the quality of polishing between sound and weathered granites. Environ Earth Sci 69(4):1347–1359

Sousa LMO, Suárez del Río LM, Calleja L, Ruiz de Argandoña V, Rey AR (2005) Influence of microfractures and porosity on the physico-mechanics properties and weathering of ornamental granites. Eng Geol 77:153–168

Steiger M, Charola E, Sterflinger K (2011) Weathering and deterioration. In: Siegesmund S, Snethlage R (eds) Stone in architecture—properties, durability, 4th edn. Springer, Berlin, pp 227–316

Suárez del Río LM (1982) Estudo petrofísico de materiales graniticos geomecanicamnete diferentes. PhD Dissertation, University of Oviedo

Suárez del Río LM, López F, Esteban FJ, Tejado JJ, Mota M, González I, San Emeterio JL, Ramos A (2006) Ultrasonic characterization of granites obtained from industrial quarries of Extremadura (Spain). Ultrasonics 24(1):1057–1061

Szczepaniak M, Nawrocka D, Mrozek-Wysocka M (2008) Applied geology in analytical characterization of stone materials from historical building. Appl Phys A 90:89–95

Takarli M, Prince W, Siddique R (2008) Damage in granite under heating/cooling cycles and water freeze–thaw condition. Int J Rock Mech Min Sci 45:1164–1175

Tercan AE, Ozcelik Y (2006) Canonical ridge correlation of mechanical and engineering index properties. Int J Rock Mech Min Sci 43:58–65

Tiryaki B, Dikmen C (2006) Effects of rock properties on specific cutting energy in linear cutting of sandstones by picks. Rock Mech Rock Eng 39:89–120

Topal T, Sözmen B (2003) Deterioration mechanisms of tuffs in Midas monument. Eng Geol 68:201–223

Török Á, Vásárhelyi B (2010) The influence of fabric and water content on selected rock mechanical parameters of travertine, examples from Hungary. Eng Geol 115:237–245

Tsui N, Flatt RJ, Scherer GW (2003) Crystallization damage by sodium sulfate. J Cult Herit 4:109–115

Tuğrul A (2004) The effect of weathering on pore geometry and compressive strength of selected rock types from Turkey. Eng Geol 75:215–227

Tuğrul A, Zarif IH (1999) Correlation of mineralogical and textural characteristics with engineering properties of selected granitic rocks from Turkey. Eng Geol 51:303–317

Vázquez P, Alonso FJ, Esbert RM, Ordaz J (2010) Ornamental granites: relationships between p-waves velocity, water capillary absorption and the crack network. Constr Build Mater 24:2536–2541

Vázquez P, Luque A, Alonso FJ, Grossi CM (2013) Surface changes on crystalline stones due to salt crystallisation. Environ Earth Sci 69(4):1237–1248

Vilhelm J, Rudajev V, Lokajíček T, Veverka J (2008) Correlation analysis of the ultrasonic emission from loaded rock samples—the study of interaction of microcracking nucleation centres. Rock Mech Rock Eng 41(5):695–714

Wanne TS, Young RP (2008) Bonded-particle modeling of thermally fractured granite. Int J Rock Mech Min Sci 45:789–799

Wells T, Hancock G, Fryer J (2008) Weathering rates of sandstone in a semi-arid environment (Hunter Valley, Australia). Environ Geol 54:1047–1057

Wong RHC, Chau KT, Wang P (1996) Microcracking and grain size effect in Yuen Long marbles. Int J Rock Mech Min Sci Geomech Abstr 33:479–485

Woo I, Fleurisson J-L, Park H-J (2006) Classification of weathering for granite and granite gneiss in South Korea. In: Proceedings 10th IAEG international congress. The Geological Society of London, IAEG2006 Paper number 131

Xu X, Gao F, Shen X, Xie H (2008) Mechanical characteristics and microcosmic mechanisms of granite under temperature loads. J China Univ Min Technol 18:413–417

Yagiz S (2009) Predicting uniaxial compressive strength, modulus of elasticity and index properties of rocks using the Schmidt hammer. Bull Eng Geol Environ 68:55–63

Yaşar E, Erdoğan Y (2004) Estimation of rock physicomechanical properties using hardness methods. Eng Geol 71:281–288

Yavuz AB, Topal T (2007) Thermal and salt crystallization effects on marble deterioration: examples from Western Anatolia, Turkey. Eng Geol 90:30–40

Yavuz AB, Turk N, Koca MY (2005) Material properties of the Menderes Massif Marbles from SW Turkey. Eng Geol 82:91–106

Yavuz H, Altindag R, Sarac S, Ugur I, Sengun N (2006) Estimating the index properties of deteriorated carbonate rocks due to freeze–thaw and thermal shock weathering. Int J Rock Mech Min Sci 43:767–775

Yavuz H, Demirdag S, Caran S (2010) Thermal effect on the physical properties of carbonate rocks. Int J Rock Mech Min Sci 47:94–103

Yildiz A, Kuşcu M, Dumlupunar I, Aritan AE, Bağcı M (2010) The determination of the mineralogical alteration index and the investigation of the efficiency of the hydrothermal alteration on physico-mechanical properties in volcanic rocks from Köprülü, Afyonkarahisar, West Turkey. Bull Eng Geol Environ 69:51–61

Yilmaz I (2009) A new testing method for indirect determination of the unconfined compressive strength of rocks. Int J Rock Mech Min Sci 46:1349–1357

Yilmaz I (2010) Use of the core strangle test for tensile strength estimation and rock mass classification. Int J Rock Mech Min Sci 47:845–850

Yilmaz I, Sendir H (2002) Correlation of Schmidt hardness with unconfined compressive strength and Young’s modulus in gypsum from Sivas (Turkey). Eng Geol 66:211–219

Yu S, Oguchi CT (2010) Role of pore size distribution in salt uptake, damage, and predicting salt susceptibility of eight types of Japanese building stones. Eng Geol 115:226–236

Zedef V, Kocak K, Doyen A, Ozsen H, Kekec B (2007) Effect of salt crystallization on stones of historical buildings and monuments, Konya, Central Turkey. Build Environ 42:1453–1457

Zhang X-P, Wong LNY, S-J Wang, Han G-Y (2011) Engineering properties of quartz mica schist. Eng Geol 121:135–149

Zhang L, Ding X, Budhu M (2012) A rock expert system for the evaluation of rock properties. Int J Rock Mech Min Sci 50:124–132

Zorlu K (2008) Description of the weathering states of building stones by fractal geometry and fuzzy inference system in the Olba ancient city (Southern Turkey). Eng Geol 101:124–133

Titel: Petrophysical properties and durability of granites employed as building stone: a comprehensive evaluation
verfasst von: Luís M. O. Sousa
Publikationsdatum: 01.05.2014
Verlag: Springer Berlin Heidelberg
Erschienen in: Bulletin of Engineering Geology and the Environment / Ausgabe 2/2014
Print ISSN: 1435-9529
Elektronische ISSN: 1435-9537
DOI: https://doi.org/10.1007/s10064-013-0553-9

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 2/2014

Estimation of limestone rock mass deformation modulus using empirical equations

Study of the unexpected collapse of the Ampurdán tunnel (Spain) using a finite elements model

Deterministic seismic hazard assessments for Taiwan considering non-controlling seismic sources

“Plagioclase solution degree index”: a new index to evaluate the weathering degree of granite

Landfill site selection utilizing TOPSIS methodology and clay liner geotechnical characterization: a case study for Ankara, Turkey

EPB tunneling challenges in bouldery ground: a new experience on the Tabriz metro line 1, Iran