nach oben

Clean Technologies and Environmental Policy

Erschienen in:

01.05.2006 | Original Paper

Correct identification of limiting water data for water network synthesis

verfasst von: Dominic Chwan Yee Foo, Zainuddin Abdul Manan, Mahmoud M. El-Halwagi

Erschienen in: Clean Technologies and Environmental Policy | Ausgabe 2/2006

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Data extraction is one of the most critical steps in carrying out a process integration study for managing water usage and discharge. Correct identification of limiting water data during process integration for water minimisation has a significant impact on the water savings achievable for a given process. This paper presents the procedure and heuristics to extract the correct limiting water data from a process plant. In addition to limiting data on pollutant concentration, the paper discusses the optimal data extraction rules pertaining to flowrate of water demand and segregation of mixed streams. The paper also quantifies the consequences of inappropriate data extraction. Two case studies are used to illustrate the insights and consequences of data extraction in water minimisation problems.

Vorheriger Artikel Genetic algorithm with adaptive and dynamic penalty functions for the selection of cleaner production measures: a constrained optimization problem

Nächster Artikel Potential electricity savings by variable speed control of compressor for air conditioning systems

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Almutlaq AM, El-Halwagi MM (2005) An algebraic approach to targeting waste discharge and impure fresh usage via material recycle/reuse networks. Clean Technol Environ Policy 7:294–305 CrossRef

Aly S, Abeer S, Awad M (2005) A new systematic approach for water network design. Clean Technol Environ Policy 7(3):154–161CrossRef

Castro P, Matos H, Fernandes MC, Nunes CP (1999) Improvements for mass-exchange networks design. Chem Eng Sci 54:1649–1665CrossRef

Dhole VR, Ramchandani N, Tainsh RA, Wasilewski M (1996) Make your process water pay for itself. Chem Eng 103:100–103

Dunn RF, Bush G (2001) Process integration technology for CLEANER production. J Clean Prod 9:1–23CrossRef

Dunn RF, Wenzel H (2001) Process integration design methods for water conservation and wastewater reduction in industry, Part 1: design for single contaminant. Clean Prod Process 3:307–318

El-Halwagi MM (1997) Pollution prevention through process integration: systematic design tools. Academic, San Diego

El-Halwagi MM, Manousiouthakis V (1989) Synthesis of mass exchange networks. AIChE J 35(8):1233–1244CrossRef

El-Halwagi MM, Gabriel F, Harrel D (2003) Rigorous graphical targeting for resource conservation via material reuse/recycle networks. Ind Eng Chem Res 42:4319–4328CrossRef

Feng X, Seider WD (2001) New structure and design method for water networks. Ind Eng Chem Res 40:6140–6146CrossRef

Hallale N (2002) A new graphical targeting method for water minimisation. Adv Env Res 6(3):377–390CrossRef

Koppol APR, Bagajewicz MJ (2003) Financial risk management in the design of water utilization systems in process plants. Ind Eng Chem Res 42:5249–5255CrossRef

Koppol APR, Bagajewicz MJ, Dericks BJ, Savelski MJ (2003) On zero discharge solutions in the process industry. Adv Env Res 8:151–171CrossRef

Kuo W-CJ, Smith R (1998) Design of water-using systems involving regeneration. Trans Inst Chem Eng 76(Part B):94–114

Linnhoff B, Townsend DW, Boland D, Hewitt GF, Thomas BEA, Guy AR, Marshall RH (1982) A user guide on process integration for the efficient use of energy. Trans Inst Chem Eng, Rugby

Manan ZA, Tan YL, Foo DCY (2004) Targeting the minimum water flowrate using water cascade analysis technique. AIChE J 50(12):3169–3183CrossRef

Mann JG, Liu YA (1999) Industrial water reuse and wastewater minimisation. McGraw Hill, New York

Olesen SG, Polley GT (1997) A simple methodology for the design of water networks handling single contaminants. Trans IChemE Part A 75:420–426CrossRef

Parthasarathy G, Krishnagopalan G (2001) Systematic reallocation of aqueous resources using mass integration in a typical pulp mill. Adv Env Res 5:61–79CrossRef

Polley GT, Polley HL (2000) Design better water networks. Chem Eng Prog 96(2):47–52

Prakash R, Shenoy UV (2005) Targeting and design of water networks for fixed flowrate and fixed contaminant load operations. Chem Eng Sci 60(1):255–268CrossRef

Sorin M, Bédard S (1999) The global pinch point in water reuse networks. Trans Inst Chem Eng 77(Part B):305–308

Tan R, Foo DCY, Manan ZA (2004) Assessing the sensitivity of water reuse network to noisy mass loads using Monte Carlo simulation. Paper presented at the 18th symposium of Malaysian Chemical Engineers (SOMChE 2004), Universiti Teknologi Petronas, Tronoh, Perak

Vaidyanathan R, Wilks T, Manousiouthakis V, Wilson S (1998) Design “clean” chemical processes. Hydrocarbon Process 77(4):79–84

Wang YP, Smith R (1994) Wastewater minimisation. Chem Eng Sci 49:981–1006CrossRef

Wang YP, Smith R (1995) Wastewater minimization with flowrate constraints. Trans Trans Inst Chem Eng 79(Part A):889–904

Wenzel H, Dunn RF, Gottrup L, Kringelum J (2002) Process integration design methods for water conservation and wastewater reduction in industry, Part 3: experience of industrial application. Clean Technol Environ Policy 4:16–25CrossRef

Titel: Correct identification of limiting water data for water network synthesis
verfasst von: Dominic Chwan Yee Foo
Zainuddin Abdul Manan
Mahmoud M. El-Halwagi
Publikationsdatum: 01.05.2006
Verlag: Springer-Verlag
Erschienen in: Clean Technologies and Environmental Policy / Ausgabe 2/2006
Print ISSN: 1618-954X
Elektronische ISSN: 1618-9558
DOI: https://doi.org/10.1007/s10098-006-0037-8

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2006

Sustainable engineering: a model for engineering education in the twenty-first century?

Approaches to the modelling of energy utilisation in product life cycles

Genetic algorithm with adaptive and dynamic penalty functions for the selection of cleaner production measures: a constrained optimization problem

D. Zaelke, D. Kaniaru, E. Kružíková (eds): Making law work: environmental compliance and sustainable development, vol 1 and 2

Clean technologies and environmental policy WEBWATCH

An artificial neural network based micro-hydropower generation scheduling: considering demand profile and environmental impact