nach oben

Cellulose

04.12.2019 | Original Research

Effect of lignin content on the microstructural characteristics of lignocellulose nanofibrils

verfasst von: Haocheng Fu, Wenhua Gao, Bin Wang, Jinsong Zeng, Zheng Cheng, Jun Xu, Kefu Chen

Erschienen in: Cellulose

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The microstructure and properties of lignocellulosic fibers usually change during the drying process due to the hornification of fibers. The water retention ability of fibers is an effective way to reflect the degree of fiber hornification. In this study, the effects of lignin content on the microstructural properties of dried-redispersed LCNFs (DLCNFs) were extensively explored. The results showed that the high content of lignin could maintain the microstructural integrity of DLCNFs. The water retention value and hornification degree of high lignin content DLCNFs (22.1%, w/w) were 289.8% and 6.9%, which were much lower than those of low lignin content (6.2%, w/w) DLCNFs. This was probably because that the crosslinking between lignin and carbohydrate effectively prevented the hydrogen bonding formation in the interior-fibers and exterior-fibers, and reduced the irreversible hornicficatoin of LCNFs. This study will be beneficial for the development of the LCNF drying mechanism.

Graphic abstract

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Ago M, Ferrer A, Rojas OJ (2016) Starch-based biofoams reinforced with lignocellulose nanofibrils from residual palm empty fruit bunches: water sorption and mechanical strength. ACS Sustain Chem Eng 4:5546–5552. https://doi.org/10.1021/acssuschemeng.6b01279 CrossRef

Bian HY, Chen LH, Dai HQ et al (2017a) Integrated production of lignin containing cellulose nanocrystals (LCNC) and nanofibrils (LCNF) using an easily recyclable di-carboxylic acid. Carbohydr Polym 167:167–176. https://doi.org/10.1016/j.carbpol.2017.03.050 CrossRefPubMed

Bian HY, Chen LH, Gleisner R et al (2017b) Producing wood-based nanomaterials by rapid fractionation of wood at 80 °C using a recyclable acid hydrotrope. Green Chem 19:3370–3379. https://doi.org/10.1039/c7gc00669a CrossRef

Bian H, Wei L, Lin C et al (2018) Lignin-containing cellulose nanofibril-reinforced polyvinyl alcohol hydrogels. ACS Sustain Chem Eng 6:4821–4828. https://doi.org/10.1021/acssuschemeng.7b04172 CrossRef

Carrillo CA, Laine J, Rojas OJ (2014) Microemulsion systems for fiber deconstruction into cellulose nanofibrils. ACS Appl Mater Interfaces 6:22622–22627. https://doi.org/10.1021/am5067332 CrossRefPubMed

Chen Y, Fan D, Han Y et al (2017) Length-controlled cellulose nanofibrils produced using enzyme pretreatment and grinding. Cellulose 24:5431–5442. https://doi.org/10.1007/s10570-017-1499-z CrossRef

Chen Y, Fan D, Han Y et al (2018) Effect of high residual lignin on the properties of cellulose nanofibrils/films. Cellulose 25:6421–6431. https://doi.org/10.1007/s10570-018-2006-x CrossRef

Delgado-Aguilar M, Tarres Q, Pelach MA et al (2015) Are cellulose nanofibers a solution for a more circular economy of paper products? Environ Sci and Technol 49:12206–12213. https://doi.org/10.1021/acs.est.5b02676 CrossRef

Ding QJ, Zeng JS, Wang B et al (2018) Effect of retention rate of fluorescent cellulose nanofibrils on paper properties and structure. Carbohyd Polym 186:73–81. https://doi.org/10.1016/j.carbpol.2018.01.040 CrossRef

Ding QJ, Zeng JS, Wang B et al (2019) Effect of nanocellulose fiber hornification on water fraction characteristics and hydroxyl accessibility during dehydration. Carbohyd Polym 207:44–51. https://doi.org/10.1016/j.carbpol.2018.11.075 CrossRef

Espinosa E, Sanchez R, Gonzalez Z et al (2017a) Rapidly growing vegetables as new sources for lignocellulose nanofibre isolation: physicochemical, thermal and rheological characterisation. Carbohyd Polym 175:27–37. https://doi.org/10.1016/j.carbpol.2017.07.055 CrossRef

Espinosa E, Sanchez R, Otero R et al (2017b) A comparative study of the suitability of different cereal straws for lignocellulose nanofibers isolation. Int Journal Biol Macromol 103:990–999. https://doi.org/10.1016/j.ijbiomac.2017.05.156 CrossRef

Ferrer A, Quintana E, Filpponen I et al (2012) Effect of residual lignin and heteropolysaccharides in nanofibrillar cellulose and nanopaper from wood fibers. Cellulose 19:2179–2193. https://doi.org/10.1007/s10570-012-9788-z CrossRef

Gierlinger N, Goswami L, Schmidt M et al (2008) In situ FT-IR microscopic study on enzymatic treamtment of poplar wood crosssections. Biomacromol 9:2194–2201. https://doi.org/10.1021/bm800300b CrossRef

Horseman T, Tajvidi M, Diop CIK et al (2017) Preparation and property assessment of neat lignocellulose nanofibrils (LCNF) and their composite films. Cellulose 24:2455–2468. https://doi.org/10.1007/s10570-017-1266-1 CrossRef

Iwamoto S, Endo T (2014) 3 nm thick lignocellulose nanofibers obtained from esterified wood with maleic anhydride. ACS Macro Letters 4:80–83. https://doi.org/10.1021/mz500787p CrossRef

Kang L, Li JP, Zeng JS et al (2019) A water solvent-assisted condensation polymerization strategy of superhydrophobic lignocellulosic fibers for efficient oil/water separation. J Mater Chem A 7:16447–16457. https://doi.org/10.1039/c9ta04815d CrossRef

Kumagai A, Lee SH, Endo T (2013) Thin film of lignocellulosic nanofibrils with different chemical composition for QCM-D study. Biomacromol 14:2420–2426. https://doi.org/10.1021/bm400553s CrossRef

Kwak HW, You J, Lee ME et al (2019) Prevention of cellulose nanofibril agglomeration during dehydration and enhancement of redispersibility by hydrophilic gelatin. Cellulose 26:4357–4369. https://doi.org/10.1007/s10570-019-02387-z CrossRef

Lanzalunga O, Bietti MJ (2000) Photo- and radiation chemical induced degradation of lignin model compounds. J Photochem Photobiol B 56:85–108CrossRef

Lei ZH, Wang SD, Fu HC et al (2019) Thermal pyrolysis characteristics and kinetics of hemicellulose isolated from Camellia Oleifera Shell. Bioresour Technol 282:228–235. https://doi.org/10.1016/j.biortech.2019.02.131 CrossRefPubMed

Li JP, Kang L, Wang B et al (2018) Controlled release and long-term antibacterial activity of dialdehyde nanofibrillated cellulose/silver nanoparticle composites. ACS Sustain Chem Eng 7:1146–1158. https://doi.org/10.1021/acssuschemeng.8b04799 CrossRef

Liu YX (2018) Strong and flexible nanocomposites of carboxylated cellulose nanofibril dispersed by industrial lignin. ACS Sustain Chem Eng 6:5524–5532. https://doi.org/10.1021/acssuschemeng.8b00402 CrossRef

Luo XL, Zhu JY (2011) Effects of drying-induced fiber hornification on enzymatic saccharification of lignocelluloses. Enzyme Microb Technol 48:92–99. https://doi.org/10.1016/j.enzmictec.2010.09.014 CrossRefPubMed

Lyne LM, Galay W (1954) Studies in the fundamentals of wet web strength. Tappi 37:698–704

Ma QL, Zhu JY, Gleisner R et al (2018) Valorization of wheat straw using a recyclable hydrotrope at low temperatures (≤ 90 °C). ACS Sustain Chem Eng 6:14480–14489. https://doi.org/10.1021/acssuschemeng.8b03135 CrossRef

Min DY, Li Q, Chiang V et al (2014) The influence of lignin–carbohydrate complexes on the cellulase-mediated saccharifcation I: transgenic black cottonwood (western balsam poplar, California poplar) P. trichocarpa including the xylan down-regulated and the lignin down-regulated lines. Fuel 119:207–213. https://doi.org/10.1016/j.fuel.2013.07.046 CrossRef

Mo WX, Li B, Li YP et al (2019) Overcoming the drying-induced pore closure of APMP poplar fibers in old newsprint by surfactant treatment to promote enzymatic hydrolysis of the cellulose. Cellulose 26:5529–5541. https://doi.org/10.1007/s10570-019-02471-4 CrossRef

Nair SS, Yan N (2015) Effect of high residual lignin on the thermal stability of nanofibrils and its enhanced mechanical performance in aqueous environments. Cellulose 22:3137–3150. https://doi.org/10.1007/s10570-015-0737-5 CrossRef

Nogi M, Iwamoto S, Nakagaito AN, Yano H et al (2009) Optically Transparent Nanofiber Paper. Adv Materc 21:1595–1598. https://doi.org/10.1002/adma.200803174 CrossRef

Pehanich JL, Blankenhorn PR, Silsbee MR (2004) Wood fiber surface treatment level effects on selected mechanical properties of wood fiber-cement composites. Cem Concr Res 34:59–65. https://doi.org/10.1016/S0008-8846(03)00193-5 CrossRef

Peng Y, Gardner DJ, Han Y (2012) Drying cellulose nanofibrils:in search of a suitable method. Cellulose 19:91–102. https://doi.org/10.1007/s10570-011-9630-z CrossRef

Peng Y, Nair SS, Chen HY et al (2018) Effects of Lignin Content on Mechanical and Thermal Properties of Polypropylene Composites Reinforced with Micro Particles of Spray Dried Cellulose Nanofibrils. ACS Sustain Chem Eng 6:11078–11086. https://doi.org/10.1021/acssuschemeng.8b02544 CrossRef

Qing Y, Sabo R, Wu YQ et al (2015) Self-assembled optically transparent cellulose nanofibril films: effect of nanofibril morphology and drying procedure. Cellulose 22:1091–1102. https://doi.org/10.1007/s10570-015-0563-9 CrossRef

Rojo E, Peresin MS, Sampson WW, Hoeger IC, Vartiainen J, Laine Rojas OJ (2015) Comprehensive elucidation of the effect of residual lignin on the physical, barrier, mechanical and surface properties of nanocellulose films. Green Chem 17(3):1853–1866. https://doi.org/10.1039/c4gc02398f CrossRef

Sehaqui H, Liu A, Zhou Q et al (2010) Fast preparation procedure for large, flat cellulose and cellulose/inorganic nanopaper structures. Biomacromol 11:2195–2198. https://doi.org/10.1021/bm100490s CrossRef

Sehaqui H, Allais M, Zhou Q et al (2011) Wood cellulose biocomposites with fibrous structures at micro- and nanoscale. Compos Sci and Technol 71:382–387. https://doi.org/10.1016/j.compscitech.2010.12.007 CrossRef

Spence KL, Venditti RA, Habibi Y et al (2010a) The effect of chemical composition on microfibrillar cellulose films from wood pulps: mechanical processing and physical properties. Bioresour Technol 101:5961–5968. https://doi.org/10.1016/j.biortech.2010.02.104 CrossRefPubMed

Spence KL, Venditti RA, Rojas OJ et al (2010b) The effect of chemical composition on microfibrillar cellulose films from wood pulps: water interactions and physical properties for packaging applications. Cellulose 17:835–848. https://doi.org/10.1007/s10570-010-9424-8 CrossRef

Vallejos ME, Felissia FE, Area MC et al (2016) Nanofibrillated cellulose (CNF) from eucalyptus sawdust as a dry strength agent of unrefined eucalyptus handsheets. Carbohydr Polym 139:99–105. https://doi.org/10.1016/j.carbpol.2015.12.004 CrossRefPubMed

Wang SD, Chen JC, Yang GH et al (2017) Efficient conversion of Hubrid Pennisetum to glucose by oxygen-aqueous alkaline ionic liquid media pretreatment under benign conditions. Bioresour Technol 243:335–338. https://doi.org/10.1016/j.biortech.2017.06.134 CrossRefPubMed

Xiang ZY, Anthony R, Tobimatsu Y et al (2014) Emulsifying properties of an arabinoxylan–protein gum from distillers’ grains and the co-production of animal feed. Cellulose 21:3623–3635. https://doi.org/10.1007/s10570-014-0379-z CrossRef

Xie F, Zhao T, Wan H et al (2019) Structural and physicochemical characteristics of rice bran dietary fiber by cellulase and high-pressure homogenization. Applied Sciences 9:1270. https://doi.org/10.3390/app9071270 CrossRef

Zhang N, Tao P, Lu Y, Nie S et al (2019) Effect of lignin on the thermal stability of cellulose nanofibrils produced from bagasse pulp. Cellulose 26:7823–7835. https://doi.org/10.1007/s10570-019-02657-w CrossRef

Titel: Effect of lignin content on the microstructural characteristics of lignocellulose nanofibrils
verfasst von: Haocheng Fu
Wenhua Gao
Bin Wang
Jinsong Zeng
Zheng Cheng
Jun Xu
Kefu Chen
Publikationsdatum: 04.12.2019
Verlag: Springer Netherlands
Erschienen in: Cellulose
Print ISSN: 0969-0239
Elektronische ISSN: 1572-882X
DOI: https://doi.org/10.1007/s10570-019-02859-2