nach oben

Journal of Intelligent Manufacturing

Erschienen in:

16.04.2021

Machine learning-based optimization of process parameters in selective laser melting for biomedical applications

verfasst von: Hong Seok Park, Dinh Son Nguyen, Thai Le-Hong, Xuan Van Tran

Erschienen in: Journal of Intelligent Manufacturing | Ausgabe 6/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Titanium-based alloy products manufactured by Selective Laser Melting (SLM) have been widely used in biomedical applications, owing to their high biocompatibility, significantly good mechanical properties. In order to improve the Ti–6Al–4V SLM-fabricated part quality and help the manufacturing engineers choose optimal process parameters, an optimization methodology based on an artificial neural network was developed to relate four key process parameters (laser power, laser scanning speed, layer thickness, and hatch distance) and two target properties of a part fabricated by the SLM technique (density ratio and surface roughness). A supervised learning deep neural network based on the backpropagation algorithm was applied to optimize input parameters for a given set of quality part outputs. Several methods were utilized to solve undesired problems occurring during neural network training to increase the model accuracy. The model’s performance was proven with a value of R² of 99% for both density ratio and surface roughness. A selection system was then built, allowing users to choose the optimal process parameters for fabricated products whose properties meet a specific user requirement. Experiments performed with the optimal process parameters recommended by the optimization system strongly confirmed its reliability by providing the ultimate part qualities nearly identical to those defined by the user with only about 0.9–4.4% of errors at the maximum. Finally, a graphical user interface was developed to facilitate the choice of the optimum process parameters for the desired density ratio and surface roughness.

Vorheriger Artikel A path planning algorithm for PCB surface quality automatic inspection

Nächster Artikel Discovering critical KPI factors from natural language in maintenance work orders

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Abadi, M., Barham, P., Chen, J., Chen, Z., Davis, A., Dean, J., et al. (2016). TensorFlow: A system for large-scale machine learning (pp. 265–283). Presented at the 12th USENIX Symposium on Operating Systems Design and Implementation. https://www.usenix.org/conference/osdi16/technical-sessions/presentation/abadi

Acharya, R., Sharon, J. A., & Staroselsky, A. (2017). Prediction of microstructure in laser powder bed fusion process. Acta Materialia, 124, 360–371. https://doi.org/10.1016/j.actamat.2016.11.018CrossRef

Ali, H., Ghadbeigi, H., & Mumtaz, K. (2018). Effect of scanning strategies on residual stress and mechanical properties of Selective Laser Melted Ti6Al4V. Materials Science and Engineering: A, 712, 175–187. https://doi.org/10.1016/j.msea.2017.11.103CrossRef

Alrbaey, K., Wimpenny, D., Tosi, R., Manning, W., & Moroz, A. (2014). On optimization of surface roughness of selective laser melted stainless steel parts: A statistical study. Journal of Materials Engineering and Performance, 23, 2139–2148. https://doi.org/10.1007/s11665-014-0993-9CrossRef

ASTM International. (2013). Standard terminology for additive manufacturing technologies: designation F2792-12a. . ASTM International.

Ataee, A., Li, Y., Brandt, M., & Wen, C. (2018). Ultrahigh-strength titanium gyroid scaffolds manufactured by selective laser melting (SLM) for bone implant applications. Acta Materialia, 158, 354–368. https://doi.org/10.1016/j.actamat.2018.08.005CrossRef

Bian, P., Shao, X., & Du, J. (2019). Finite Element analysis of thermal stress and thermal deformation in typical part during SLM. Applied Sciences, 9(11), 2231. https://doi.org/10.3390/app9112231CrossRef

Boivineau, M., Cagran, C., Doytier, D., Eyraud, V., Nadal, M.-H., Wilthan, B., & Pottlacher, G. (2006). Thermophysical properties of solid and liquid Ti–6Al–4V (TA6V) alloy. International Journal of Thermophysics, 27(2), 507–529. https://doi.org/10.1007/PL00021868CrossRef

Dadbakhsh, S., Hao, L., & Sewell, N. (2012). Effect of selective laser melting layout on the quality of stainless steel parts. Rapid Prototyping Journal, 18(3), 241–249. https://doi.org/10.1108/13552541211218216CrossRef

Dahl, G. E., Sainath, T. N., & Hinton, G. E. (2013). Improving deep neural networks for LVCSR using rectified linear units and dropout (pp. 8609–8613). Presented at the 2013 IEEE International Conference on Acoustics, Speech and Signal Processing. https://doi.org/10.1109/ICASSP.2013.6639346

Dilip, J. J. S., Zhang, S., Teng, C., Zeng, K., Robinson, C., Pal, D., & Stucker, B. (2017). Influence of processing parameters on the evolution of melt pool, porosity, and microstructures in Ti-6Al-4V alloy parts fabricated by selective laser melting. Progress in Additive Manufacturing, 2(3), 157–167. https://doi.org/10.1007/s40964-017-0030-2CrossRef

Dimter, M., Mayer, R., Hummeler, L., Salzberger, R., Kotila, J., & Syvanen, T. (2008). Method and device for manufacturing a three-dimensional object. https://patents.google.com/patent/US20080241392A1/en

Duchi, J., Hazan, E., & Singer, Y. (2011). Adaptive subgradient methods for online learning and stochastic optimization. The Journal of Machine Learning Research, 12, 2121–2159.

Edwards, P., & Ramulu, M. (2014). Fatigue performance evaluation of selective laser melted Ti–6Al–4V. Materials Science and Engineering: A, 598, 327–337. https://doi.org/10.1016/j.msea.2014.01.041CrossRef

Fausett, L. (2006). Fundamentals of neural networks: Architectures, algorithms, and applications. . Prentice-Hall.

Fergani, O., Berto, F., Welo, T., & Liang, S. Y. (2017). Analytical modelling of residual stress in additive manufacturing. Fatigue & Fracture of Engineering Materials & Structures, 40(6), 971–978. https://doi.org/10.1111/ffe.12560CrossRef

Gao, W., & Zhou, Z.-H. (2016). Dropout Rademacher complexity of deep neural networks. Science China Information Sciences, 59(7), 072104. https://doi.org/10.1007/s11432-015-5470-zCrossRef

Garg, A., Lam, J. S. L., & Savalani, M. M. (2018). Laser power based surface characteristics models for 3-D printing process. Journal of Intelligent Manufacturing, 29(6), 1191–1202. https://doi.org/10.1007/s10845-015-1167-9CrossRef

Geetha, M., Singh, A. K., Asokamani, R., & Gogia, A. K. (2009). Ti based biomaterials, the ultimate choice for orthopaedic implants: A review. Progress in Materials Science, 54(3), 397–425. https://doi.org/10.1016/j.pmatsci.2008.06.004CrossRef

Glorot, X., & Bengio, Y. (2010). Understanding the difficulty of training deep feedforward neural networks. In Proceedings of the Thirteenth International Conference on Artificial Intelligence and Statistics (pp. 249–256).

Gnecco, G., & Sanguineti, M. (2009). The weight-decay technique in learning from data: An optimization point of view. Computational Management Science, 6(1), 53–79. https://doi.org/10.1007/s10287-008-0072-5CrossRef

Gong, H., Rafi, K., Gu, H., Janaki Ram, G. D., Starr, T., & Stucker, B. (2015). Influence of defects on mechanical properties of Ti–6Al–4V components produced by selective laser melting and electron beam melting. Materials & Design, 86, 545–554. https://doi.org/10.1016/j.matdes.2015.07.147CrossRef

Goodfellow, I., Bengio, Y., & Courville, A. (2016). Deep learning. . The MIT Press.

Hanzl, P., Zetek, M., Bakša, T., & Kroupa, T. (2015). The influence of processing parameters on the mechanical properties of SLM parts. Procedia Engineering, 100, 1405–1413. https://doi.org/10.1016/j.proeng.2015.01.510CrossRef

Hu, Z., Qin, X., Li, Y., Yuan, J., & Wu, Q. (2020). Multi-bead overlapping model with varying cross-section profile for robotic GMAW-based additive manufacturing. Journal of Intelligent Manufacturing, 31(5), 1133–1147. https://doi.org/10.1007/s10845-019-01501-zCrossRef

Huiskes, R., Ruimerman, R., van Lenthe, G. H., & Janssen, J. D. (2000). Effects of mechanical forces on maintenance and adaptation of form in trabecular bone. Nature, 405(6787), 704–706. https://doi.org/10.1038/35015116CrossRef

Jin, X., Xu, C., Feng, J., Wei, Y., Xiong, J., & Yan, S. (2016). Deep learning with S-shaped rectified linear activation units. In 30th AAAI Conference on Artificial Intelligence, AAAI 2016.

Kasperovich, G., & Hausmann, J. (2015). Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting. Journal of Materials Processing Technology, 220, 202–214. https://doi.org/10.1016/j.jmatprotec.2015.01.025CrossRef

Keskar, N. S., Mudigere, D., Nocedal, J., Smelyanskiy, M., & Tang, P. T. P. (2017). On large-batch training for deep learning: Generalization gap and sharp minima. In International conference on learning representations. http://arxiv.org/abs/1609.04836

Kingma, D. P., & Ba, J. (2015). Adam: A Method for Stochastic Optimization. In International conference on learning representations.

Kuhn, M., & Johnson, K. (2013). Applied predictive modeling. . Springer-Verlag. https://doi.org/10.1007/978-1-4614-6849-3CrossRef

Kwon, O., Kim, H. G., Ham, M. J., Kim, W., Kim, G.-H., Cho, J.-H., et al. (2020). A deep neural network for classification of melt-pool images in metal additive manufacturing. Journal of Intelligent Manufacturing, 31(2), 375–386. https://doi.org/10.1007/s10845-018-1451-6CrossRef

Li, C., Fu, C. H., Guo, Y. B., & Fang, F. Z. (2016). A multiscale modeling approach for fast prediction of part distortion in selective laser melting. Journal of Materials Processing Technology, 229, 703–712. https://doi.org/10.1016/j.jmatprotec.2015.10.022CrossRef

Li, Y., Yang, C., Zhao, H., Qu, S., Li, X., & Li, Y. (2014). New developments of Ti-based alloys for biomedical applications. Materials, 7(3), 1709–1800. https://doi.org/10.3390/ma7031709CrossRef

Masuo, H., Tanaka, Y., Morokoshi, S., Yagura, H., Uchida, T., Yamamoto, Y., & Murakami, Y. (2017). Effects of defects, surface roughness and hip on fatigue strength of Ti-6Al-4V manufactured by additive manufacturing. Procedia Structural Integrity, 7, 19–26. https://doi.org/10.1016/j.prostr.2017.11.055CrossRef

Mukherjee, T., Zhang, W., & DebRoy, T. (2017). An improved prediction of residual stresses and distortion in additive manufacturing. Computational Materials Science, 126, 360–372. https://doi.org/10.1016/j.commatsci.2016.10.003CrossRef

Nair, V., & Hinton, G. E. (2010). Rectified linear units improve restricted boltzmann machines. In Proceedings of the 27th international conference on international conference on machine learning (pp. 807–814).

Narayan, S. (1997). The generalized sigmoid activation function: Competitive supervised learning. Information Sciences, 99(1), 69–82. https://doi.org/10.1016/S0020-0255(96)00200-9CrossRef

Nguyen, D. S., Park, H. S., & Lee, C. M. (2019). Effect of cleaning gas stream on products in selective laser melting. Materials and Manufacturing Processes, 34(4), 455–461. https://doi.org/10.1080/10426914.2018.1512132CrossRef

Nguyen, D. S., Park, H. S., & Lee, C. M. (2020). Optimization of selective laser melting process parameters for Ti-6Al-4V alloy manufacturing using deep learning. Journal of Manufacturing Processes, 55, 230–235. https://doi.org/10.1016/j.jmapro.2020.04.014CrossRef

O’Brien, F. J. (2011). Biomaterials & scaffolds for tissue engineering. Materials Today, 14(3), 88–95. https://doi.org/10.1016/S1369-7021(11)70058-XCrossRef

Panda, B., Shankhwar, K., Garg, A., & Savalani, M. M. (2019). Evaluation of genetic programming-based models for simulating bead dimensions in wire and arc additive manufacturing. Journal of Intelligent Manufacturing, 30(2), 809–820. https://doi.org/10.1007/s10845-016-1282-2CrossRef

Parry, L., Ashcroft, I. A., & Wildman, R. D. (2016). Understanding the effect of laser scan strategy on residual stress in selective laser melting through thermo-mechanical simulation. Additive Manufacturing, 12, 1–15. https://doi.org/10.1016/j.addma.2016.05.014CrossRef

Pleass, C., & Jothi, S. (2018). Influence of powder characteristics and additive manufacturing process parameters on the microstructure and mechanical behaviour of Inconel 625 fabricated by Selective Laser Melting. Additive Manufacturing, 24, 419–431. https://doi.org/10.1016/j.addma.2018.09.023CrossRef

Qi, X., Chen, G., Li, Y., Cheng, X., & Li, C. (2019). Applying Neural-network-based machine learning to additive manufacturing: current applications, challenges, and future perspectives. Engineering, 5(4), 721–729. https://doi.org/10.1016/j.eng.2019.04.012CrossRef

Refaeilzadeh, P., Tang, L., & Liu, H. (2009). Cross-validation. In L. Liu & M. T. Özsu (Eds.), Encyclopedia of database systems. (pp. 532–538). Springer. https://doi.org/10.1007/978-0-387-39940-9_565CrossRef

Rumelhart, D. E., Hinton, G. E., & Williams, R. J. (1986). Learning representations by back-propagating errors. Nature, 323(6088), 533–536. https://doi.org/10.1038/323533a0CrossRef

Song, B., Dong, S., Zhang, B., Liao, H., & Coddet, C. (2012). Effects of processing parameters on microstructure and mechanical property of selective laser melted Ti6Al4V. Materials & Design, 35, 120–125. https://doi.org/10.1016/j.matdes.2011.09.051CrossRef

Sun, J., Yang, Y., & Wang, D. (2013). Parametric optimization of selective laser melting for forming Ti6Al4V samples by Taguchi method. Optics & Laser Technology, 49, 118–124. https://doi.org/10.1016/j.optlastec.2012.12.002CrossRef

Sun, W., Ma, Y., Huang, W., Zhang, W., & Qian, X. (2020). Effects of build direction on tensile and fatigue performance of selective laser melting Ti6Al4V titanium alloy. International Journal of Fatigue, 130, 105260. https://doi.org/10.1016/j.ijfatigue.2019.105260CrossRef

Trevisan, F., Calignano, F., Aversa, A., Marchese, G., Lombardi, M., Biamino, S., et al. (2018). Additive manufacturing of titanium alloys in the biomedical field: Processes, properties and applications. Journal of Applied Biomaterials & Functional Materials, 16(2), 57–67. https://doi.org/10.5301/jabfm.5000371CrossRef

Valente, E. H., Gundlach, C., Christiansen, T. L., & Somers, M. A. J. (2019). Effect of scanning strategy during selective laser melting on surface topography, porosity, and microstructure of additively manufactured Ti-6Al-4V. Applied Sciences, 9(24), 5554. https://doi.org/10.3390/app9245554CrossRef

Van Hooreweder, B., Apers, Y., Lietaert, K., & Kruth, J.-P. (2017). Improving the fatigue performance of porous metallic biomaterials produced by Selective Laser Melting. Acta Biomaterialia, 47, 193–202. https://doi.org/10.1016/j.actbio.2016.10.005CrossRef

Vanmeensel, K., Lietaert, K., Vrancken, B., Dadbakhsh, S., Li, X., Kruth, J.-P., et al. (2018). 8: Additively manufactured metals for medical applications. In J. Zhang & Y.-G. Jung (Eds.), Additive manufacturing. (pp. 261–309). Butterworth-Heinemann. https://doi.org/10.1016/B978-0-12-812155-9.00008-6CrossRef

Vayssette, B., Saintier, N., Brugger, C., Elmay, M., & Pessard, E. (2018). Surface roughness of Ti-6Al-4V parts obtained by SLM and EBM: Effect on the High Cycle Fatigue life. Procedia Engineering, 213, 89–97. https://doi.org/10.1016/j.proeng.2018.02.010CrossRef

Walker, K. F., Liu, Q., & Brandt, M. (2017). Evaluation of fatigue crack propagation behaviour in Ti-6Al-4V manufactured by selective laser melting. International Journal of Fatigue, 104, 302–308. https://doi.org/10.1016/j.ijfatigue.2017.07.014CrossRef

Wauthle, R., Vrancken, B., Beynaerts, B., Jorissen, K., Schrooten, J., Kruth, J.-P., & Van Humbeeck, J. (2015). Effects of build orientation and heat treatment on the microstructure and mechanical properties of selective laser melted Ti6Al4V lattice structures. Additive Manufacturing, 5, 77–84. https://doi.org/10.1016/j.addma.2014.12.008CrossRef

Xia, C., Pan, Z., Polden, J., Li, H., Xu, Y., & Chen, S. (2021). Modelling and prediction of surface roughness in wire arc additive manufacturing using machine learning. Journal of Intelligent Manufacturing. https://doi.org/10.1007/s10845-020-01725-4CrossRef

Xiong, J., Zhang, G., Hu, J., & Wu, L. (2014). Bead geometry prediction for robotic GMAW-based rapid manufacturing through a neural network and a second-order regression analysis. Journal of Intelligent Manufacturing, 25(1), 157–163. https://doi.org/10.1007/s10845-012-0682-1CrossRef

Yan, C., Hao, L., Hussein, A., & Young, P. (2015). Ti–6Al–4V triply periodic minimal surface structures for bone implants fabricated via selective laser melting. Journal of the Mechanical Behavior of Biomedical Materials, 51, 61–73. https://doi.org/10.1016/j.jmbbm.2015.06.024CrossRef

Yan, X., Yin, S., Chen, C., Huang, C., Bolot, R., Lupoi, R., et al. (2018). Effect of heat treatment on the phase transformation and mechanical properties of Ti6Al4V fabricated by selective laser melting. Journal of Alloys and Compounds, 764, 1056–1071. https://doi.org/10.1016/j.jallcom.2018.06.076CrossRef

Yánez, A., Cuadrado, A., Martel, O., Afonso, H., & Monopoli, D. (2018). Gyroid porous titanium structures: A versatile solution to be used as scaffolds in bone defect reconstruction. Materials & Design, 140, 21–29. https://doi.org/10.1016/j.matdes.2017.11.050CrossRef

Yap, C. Y., Chua, C. K., & Dong, Z. L. (2016). An effective analytical model of selective laser melting. Virtual and Physical Prototyping, 11(1), 21–26. https://doi.org/10.1080/17452759.2015.1133217CrossRef

Yap, C. Y., Chua, C. K., Dong, Z. L., Liu, Z. H., Zhang, D. Q., Loh, L. E., & Sing, S. L. (2015). Review of selective laser melting: Materials and applications. Applied Physics Reviews, 2(4), 041101. https://doi.org/10.1063/1.4935926CrossRef

Yun, K., Huyen, A., & Lu, T. (2018). Deep neural networks for pattern recognition. In Advances in pattern recognition research (pp. 49–79).

Zareidoost, A., Yousefpour, M., Ghaseme, B., & Amanzadeh, A. (2012). The relationship of surface roughness and cell response of chemical surface modification of titanium. Journal of Materials Science Materials in Medicine, 23(6), 1479–1488. https://doi.org/10.1007/s10856-012-4611-9CrossRef

Zhang, L. C., & Attar, H. (2016). Selective laser melting of titanium alloys and titanium matrix composites for biomedical applications: A review. Advanced Engineering Materials, 18(4), 463–475. https://doi.org/10.1002/adem.201500419CrossRef

Zhao, Y., Aoyagi, K., Yamanaka, K., & Chiba, A. (2020). Role of operating and environmental conditions in determining molten pool dynamics during electron beam melting and selective laser melting. Additive Manufacturing, 36, 101559. https://doi.org/10.1016/j.addma.2020.101559CrossRef

Zimmermann, H.-J. (1975). Description and optimization of fuzzy systems†. International Journal of General Systems, 2(1), 209–215. https://doi.org/10.1080/03081077508960870CrossRef

Titel: Machine learning-based optimization of process parameters in selective laser melting for biomedical applications
verfasst von: Hong Seok Park
Dinh Son Nguyen
Thai Le-Hong
Xuan Van Tran
Publikationsdatum: 16.04.2021
Verlag: Springer US
Erschienen in: Journal of Intelligent Manufacturing / Ausgabe 6/2022
Print ISSN: 0956-5515
Elektronische ISSN: 1572-8145
DOI: https://doi.org/10.1007/s10845-021-01773-4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 6/2022

Fuzzy harmony search based optimal control strategy for wireless cyber physical system with industry 4.0

Discovering critical KPI factors from natural language in maintenance work orders

A framework for a knowledge based cold spray repairing system

A systematic mapping of semi-formal and formal methods in requirements engineering of industrial Cyber-Physical systems

Nonparametric-copula-entropy and network deconvolution method for causal discovery in complex manufacturing systems

Machine learning in continuous casting of steel: a state-of-the-art survey

Premium Partner

Marktübersichten