Skip to main content
Fachgebiete
Automobil + Motoren Bauwesen + Immobilien Business IT + Informatik Elektrotechnik + Elektronik Energie + Nachhaltigkeit Finance + Banking Management + Führung Marketing + Vertrieb Maschinenbau + Werkstoffe Versicherung + Risiko
DE
EN
Themenseiten
Organisationspsychologie Projektmanagement Marketing Smart Manufacturing
Bücher
Zeitschriften
Weitere Formate
Podcasts Webinare Technik Webinare Wirtschaft Kongresse Veranstaltungskalender Awards
Jetzt Einzelzugang starten
Zugang für Unternehmen
Referenzkunden
ATZ-Fachkongress

Chassis.tech plus 2024


4 Kongresse in einer Veranstaltung

Treffen Sie in München die Fachleute von Chassis, Lenkung, Bremsen sowie Reifen/Räder.
Erweiterte Suche
Anmelden
nach oben
Journal of Materials Science
Erschienen in: Journal of Materials Science 17/2017

22.05.2017 | Composites

Stress-induced damage evolution in cast AlSi12CuMgNi alloy with one- and two-ceramic reinforcements

verfasst von: S. Cabeza, T. Mishurova, G. Garcés, I. Sevostianov, G. Requena, G. Bruno

Erschienen in: Journal of Materials Science | Ausgabe 17/2017

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Two composites, consisting of an as-cast AlSi12CuMgNi alloy reinforced with 15 vol% Al2O3 short fibres and with 7 vol% Al2O3 short fibres + 15 vol% SiC particles, were studied. Synchrotron computed tomography disclosed distribution, orientation, and volume fraction of the different phases. In-situ compression tests during neutron diffraction in direction parallel to the fibres plane revealed the load partition between phases. Internal damage (fragmentation) of the Si phase and Al2O3 fibres was directly observed in CT reconstructions. Significant debonding between Al matrix and SiC particles was also found. Finally, based on the Maxwell scheme, a micromechanical model was utilized for the new composite with two-ceramic reinforcements; it rationalizes the experimental data and predicts the evolution of all internal stress components in each phase.
Vorheriger Artikel Three-dimensional in situ observations of compressive damage mechanisms in syntactic foam using X-ray microcomputed tomography
Nächster Artikel Structure and mechanical/abrasive wear behavior of a purely natural composite: black-fiber palm wood

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Jetzt informieren
Anhänge
Nur mit Berechtigung zugänglich
Literatur
1.
Cho YH, Im YR, Kwon SW, Lee HC (2003) The effect of alloying elements on the microstructure and mechanical properties of Al-12Si cast alloys. Mater Sci Forum 339:426–432
2.
Rohatgi PK, Sharma RC, Praphakar KV (1975) Microstructure and mechanical properties of unidirectionally solidified Al–Si–Ni ternary eutectic. Metall Trans A 6:596–675
3.
Hukai S, Takeuchi K, Tanaka E (1964) On the elevated-temperature strengths of some aluminum cast alloys for piston. J Soc Mater Sci 13:190–196CrossRef
4.
Moustafa MA, Samuel FH, Doty HW (2003) Effect of solution heat treatment and additives on the hardness, tensile properties and fracture behaviour of Al–Si automotive alloys. J Mater Sci 38:4523–4534. doi:10.​1023/​A:​1027385619114 CrossRef
5.
Ammar HR, Moreau C, Samuel AM, Samuel FH, Doty HW (2008) Influences of alloying elements, solution treatment time and quenching media on quality indices of 413-type Al–Si casting alloys. Mater Sci Eng A 489:426–438CrossRef
6.
Yunguo L, Yang Y, Wu Y, Wang L, Liu X (2010) Quantitative comparison of three Ni-containing phases to the elevated-temperature properties of Al–Si piston alloys. Mater Sci Eng A527:7132–7137
7.
Asghar Z, Requena G, Sket F (2015) Multiscale tomographic analysis of heterogeneous cast Al–Si–X alloys. J Microsc 259:1–9CrossRef
8.
Asghar Z, Requena G, Boller E (2011) Three-dimensional rigid multiphase networks providing high-temperature strength to cast AlSi10Cu5Ni1-2 piston alloys. Acta Mater 59:6420–6432CrossRef
9.
Zolotorevsky VS, Belov NA, Glazoff MV (2007) Casting aluminum alloys. Elsevier, Amsterdam
10.
Clyne TW, Whiters PJ (1995) An introduction to metal matrix composites. Cambridge Solid State Science, Cambridge
11.
Dragone T, Nix W (1990) Geometric factors affecting the internal stress distribution and high temperature creep rate of discontinuous fiber reinforced metals. Acta Metall Mater 38:1941–1953CrossRef
12.
Dlouhy A, Eggeler G, Merk N (1995) A micromechanical model for creep in short fibre reinforced aluminium alloys. Acta Metall Mater 43:535–550CrossRef
13.
Requena G, Degischer HP (2006) Creep behaviour of unreinforced and short fibre reinforced AlSi12CuMgNi piston alloy. Mater Sci Eng A 420:265–275CrossRef
14.
Llorca J, Needleman A, Suresh S (1991) An analysis of the effects of matrix void growth on deformation and ductility in metal-ceramic composites. Acta Metal Mater 39:2317–2335CrossRef
15.
16.
Garcés G, Bruno G, Wanner A (2007) Load transfer in short fibre reinforced metal matrix composites. Acta Mater 55:5389–5400CrossRef
17.
Garces G, Bruno G, Wanner A (2006) Residual stresses in deformed random-planar aluminium/Saffil® short-fibre composites. Mater Sci Eng A 417:73–81CrossRef
18.
Garcés G, Bruno G, Wanner A (2006) Internal stress evolution in a random-planar short fiber aluminum composite. Scr Mater 55:163–166CrossRef
19.
Michaud V, Mortensen A (2001) Infiltration processing of fibre reinforced composites: governing phenomena. Compos A 32:981–996CrossRef
20.
Fitzpatrick ME, Withers PJ, Baczmanski A, Hutchings MT, Levy R, Ceretti M, Lodini A (2002) Changes in the misfit stresses in an Al-SiCp metal matrix composite under plastic strain. Acta Mater 50:1031–1040CrossRef
21.
Winand H, Whitehouse A, Whiters P (2000) An investigation of the isothermal creep response of Al-based composites by neutron diffraction. Mater Sci Eng A 284:103–113CrossRef
22.
Requena G, Degischer HP (2005) Effects of particle reinforcement on creep behaviour of AlSi1MgCu. Zeitschrift für Metallkunde 96:805–811
23.
Mohamed F (1998) Correlation between creep behavior in Al-based solid solution alloys and powder metallurgy Al alloys. Mater Sci Eng A 245:242–256CrossRef
24.
Whitehouse A, Winand H, Clyne T (1998) The effect of processing route and reinforcement geometry on isothermal creep behaviour of particulate and short fibre MMCs. Mater Sci Eng A 242:57–69CrossRef
25.
Ma Z, Tjong S (1999) The performance of aluminium-matrix composites with nanometric particulate Si–N–C reinforcement. Compos Sci Technol 59:263–270CrossRef
26.
Shinichi T, Senichi Y (1986) Mechanical properties of aluminum reinforced with continuous silicon-carbide fibres and whiskers or particulates. Trans Jpn Inst Metals 27:709–716CrossRef
27.
De Bondt S, Froyen L, Deruyttere A (1991) Squeeze casting of hybrid Al2O3-SiC fiber-particle composites. Mater Sci Eng A 135:29–32CrossRef
28.
Mondal AK, Blawert C, Kumar S (2015) Corrosion behaviour of creep-resistant AE42 magnesium alloy-based hybrid composites developed for powertrain applications. Mater Corros 66(10):1150–1158CrossRef
29.
Kumara S, Dieringa H, Kainer KU (2005) Effect of particulate content on the thermal cycling behaviour of the magnesium alloy based hybrid composites. Compos A 36:321–325CrossRef
30.
Cardinal S, Mili MR, Merle P (1998) Improvement of high pressure infiltration behaviour of alumina platelet preforms—manufacture and characterization of hybrid preforms. Compos A 29:1433–1441CrossRef
31.
Kruglova A, Engstler M, Gaiselmann G, Stenzel O, Schmidt V, Roland M, Diebels S, Mücklich F (2016) 3D connectivity of eutectic Si as a key property defining strength of Al–Si alloys. Compos Mater Sci 120:99–107CrossRef
32.
Requena G, Garcés G, Asghar Z, Marks E, Staron P, Cloetens P (2011) The effect of the connectivity of rigid phases on strength of Al–Si alloys. Adv Eng Mater 13:674–684CrossRef
33.
Prangnel PB, Barnes SJ, Roberts SM, Withers PJ (1996) The effect of particle distribution on damage formation in particulate reinforced metal matrix composites deformed in compression. Mater Sci Eng A 220:41–56CrossRef
34.
Altinkok N (2015) Use of artificial neural network for prediction of physical properties and tensile strengths in particle reinforced aluminum matrix composites. J Mater Sci 40:1767–1770. doi:10.​1007/​s10853-005-0689-5 CrossRef
35.
Cabeza S, Mishurova T, Bruno G, Garcés G, Requena G (2016) The role of reinforcement orientation on the damage evolution of AlSi12CuMgNi + 15% Al2O3 under compression. Scr Mater 122:115–118CrossRef
36.
Babout L, Maire E, Fougeres R (2004) Damage initiation in model metallic materials: X-ray tomography and modelling. Acta Mater 52:2475–2487CrossRef
37.
Maire E, Bordreuil C, Babout L, Boyer JC (2005) Damage initiation and growth in metals. Comparison between modelling and tomography experiments. J Mech Phys Solids 53:2411–2434CrossRef
38.
Tavangar R, Weber L, Mortensen A (2005) Damage evolution in Saffil alumina short-fibre reinforced aluminium during tensile testing. Mater Sci Eng A 395:27–34CrossRef
39.
Budiansky B, Hutchinson JW, Slutsky DR (1982) Void growth and collapse in viscous solids. In: Mechanics of Solids. Pergamon, New York, pp 13–46
40.
Charles Y, Estevez R, Bréchet Y, Maire E (2010) Modelling the competition between interface debonding and particle fracture using a plastic strain dependent cohesive zone. Eng Fract Mech 77:705–718CrossRef
41.
Maire E, Babout L, Buffiere JY, Fougeres R (2001) Recent results on 3D characterisation of microstructure and damage of metal matrix composites and a metallic foam using X-ray tomography. Mater Sci Eng A 319:216–219CrossRef
42.
Babout L, Maire E, Buffiere JY, Fougeres R (2001) Characterization by X-ray computed tomography of decohesion, porosity growth and coalescence in model metal matrix composites. Acta Mater 49:2055–2063CrossRef
43.
Prangnel PB, Barnes SJ, Roberts SM, Withers PJ (1996) The effect of particle distribution on damage formation in particulate reinforced metal matrix composites deformed in compression. Mater Sci Eng A 220:41–56CrossRef
44.
Weck A, Wilkinson DS, Maire E (2008) Observation of void nucleation, growth and coalescence in a model metal matrix composite using X-ray tomography. Mater Sci Eng A 488:435–444CrossRef
45.
Paganin D, Mayo SC, Gureyev TE, Miller PR, Wilkins SW (2002) Simultaneous phase and amplitude extraction from a single defocused image of a homogeneous object. J Microsc 206:33–40CrossRef
46.
Weitkamp T, Haas D, Wegrzynek D, Rack A (2011) ANKAphase: software for single-distance phase-retrieval from inline X-ray phase contrast radiographs. J Synchrotron Rad 18:617–629CrossRef
47.
Hoelzel M, Gan WM, Hofmann M, Randau C, Seidl G, Jüttner PH, Schmahl WW (2013) Rotatable multifunctional load frames for neutron diffractometers at FRMII—design, specifications and applications. Nuc Instr Methods Phys Res A 711:101–105CrossRef
48.
Roy S, Gibmeier J, Kostov V, Weidenmann KA, Nagel A, Wanner A (2011) Internal load transfer in a metal matrix composite with a three-dimensional interpenetrating structure. Acta Mater 59:1424–1435CrossRef
49.
Wern H (2000) XEC program version 1.0, Ottweiler, Germany
50.
Tolnai D, Requena G, Cloetens P, Lendvai J, Degischer HP (2013) Effect of solution heat treatment on the internal architecture and compressive strength of an AlMg4.7Si8 alloy. Mater Sci Eng A 585:480–487CrossRef
51.
Garces G, Bruno G, Wanner A (2006) Residual stresses in random-planar aluminium/Saffil® short-fibre composites deformed in different loading modes. Int J Mater Res 97:1312–1319CrossRef
52.
Hutchings MT, Withers PJ, Holden TM, Lorentzen T (2005) Introduction to the characterization of residual stresses by neutron diffraction. Taylor and Francis, Boca Raton
53.
Withers PJ, Stobbs WM, Pedersen OB (1989) The application of the Eshelby method of internal stress determination to short fibre metal matrix composites. Acta Metall 37:3061–3084CrossRef
54.
Rice JR, Tracey DM (1969) On the ductile enlargement of voids in triaxial stress fields. J Mech Phys Solids 17:201–217CrossRef
55.
Allen AJ, Bourke MAM, Dawes S, Hutchings MT, Withers PJ (1992) The analysis of internal strains measured by neutron diffraction in Al/SiC metal matrix composites. Acta Metall Mater 40:2361–2373CrossRef
56.
Pragnell PB, Stobbs WM, Withers PJ (1992) Considerations in the use of yield asymmetries for the analysis of internal stresses in metal matrix composites. Mater Sci Eng A 159:51–63CrossRef
57.
Sevostianov I, Kachanov M (2009) Connections between elastic and conductive properties of heterogeneous materials. In: van der Giessen E, Aref H (eds) Advances in applied mechanics, vol 42. Academic Press, New York, pp 69–252
58.
Maxwell JC (1873) A treatise on electricity and magnetism. Clarendon Press, Oxford
59.
Sevostianov I, Giraud A (2013) Generalization of Maxwell homogenization scheme for elastic material containing inhomogeneities of diverse shape. Int J Eng Sci 64:23–36CrossRef
60.
Sevostianov I (2014) On the shape of effective inclusion in the Maxwell homogenization scheme for anisotropic elastic composites. Mech Mater 75:45–59CrossRef
61.
Mishurova T, Cabeza S, Bruno G, Sevostianov I (2016) Average phase stress concentrations in multiphase metal matrix composites under compressive loading. Int Eng Sci 115–118
62.
Sevostianov I, Kachanov M (2015) On the possibility to represent effective properties of a material with inhomogeneities in terms of a single concentration parameter. Int J Solids Struct 52:197–204CrossRef
63.
Mori T, Tanaka K (1973) Average stress in matrix and average elastic energy of materials with misfitting inclusions. Acta Metall 21:571–574CrossRef
64.
Benveniste Y (1987) A new approach to the application of Mori–Tanaka’s theory in composite materials. Mech Mater 6:147–157CrossRef
65.
Lasagni F, Acuna JA, Degischer HP (2008) Interpenetrating hybrid reinforcement in Al2O3 short fiber preforms infiltrated by Al–Si alloys. Metall Mater Trans A 39–6:1466–1474CrossRef
66.
Hill R (1963) Elastic properties of reinforced solids: some theoretical principles. J Mech Phys Solids 11:357–372CrossRef
67.
Wu TT (1966) The effect of inclusion shape on the elastic moduli of a two-phase material. Int J Solids Struct 2:1–8CrossRef
68.
Mogilevskaya SG, Stolarski HK, Crouch SL (2012) On Maxwell’s concept of equivalent inhomogeneity: when do the interactions matter? J Mech Phys Solids 60:391–441CrossRef
69.
Ashby MF (1970) The deformation of plastically non-homogeneous materials. Philos Mag 9–21:399–424CrossRef
70.
71.
Johannesson B (2001) Effect of reinforcement geometry on matrix stresses in three aluminium metal matrix composite systems. Scr Mater 45:993–1000CrossRef
72.
Müller A, Weidner A, Biermann H (2015) Influence of reinforcement geometry on the very high-cycle fatigue behavior of aluminium-matrix-composites. Mater Sci Forum 825–826
73.
Maire E, Babout L, Buffiere JY, Fougeres R (2001) Recent results on 3D characterisation of microstructure and damage of metal matrix composites and a metallic foam using X-ray tomography. Mater Sci Eng A 319:216–219CrossRef
74.
Flom Y, Arsenault RJ (1986) Interfacial bond strength in an aluminium alloy 6061—SiC composite. Mater Sci Eng A 77:191–197CrossRef
75.
Li S, Arsenault RJ, Jena P (1988) Quantum chemical study of adhesion at the SiC/Al interface. J Appl Phys 64:6246–6253CrossRef
76.
Requena G, Garcés G, Danko S, Pirling T, Boller E (2009) The effect of eutectic Si on the strength of short-fibre-reinforced Al. Acta Mater 57:3199–3210CrossRef
77.
Requena G, Garcés G, Rodriguez M, Pirling T, Cloetens P (2009) 3D architecture and load partition in eutectic Al–Si alloys. Adv Eng Mater 11:1007–1014
78.
Kushch VI, Sevostianov I (2016) Maxwell homogenization scheme as a rigorous method of micromechanics: application to effective conductivity of a composite with spheroidal particles. Int J Eng Sci 98:36–50CrossRef
Metadaten
Titel
Stress-induced damage evolution in cast AlSi12CuMgNi alloy with one- and two-ceramic reinforcements
verfasst von
S. Cabeza
T. Mishurova
G. Garcés
I. Sevostianov
G. Requena
G. Bruno
Publikationsdatum
22.05.2017
Verlag
Springer US
Erschienen in
Journal of Materials Science / Ausgabe 17/2017
Print ISSN: 0022-2461
Elektronische ISSN: 1573-4803
DOI
https://doi.org/10.1007/s10853-017-1182-7

Weitere Artikel der Ausgabe 17/2017

Journal of Materials Science 17/2017 Zur Ausgabe

Composites

Structure and mechanical/abrasive wear behavior of a purely natural composite: black-fiber palm wood

Energy materials

Recent developments in electrochemical sensors based on nanomaterials for determining glucose and its byproduct H2O2

Energy materials

Relationship between microstructure and dielectric property of hydroxyl-terminated butadiene–acrylonitrile copolymer-based polyurethanes

Ceramics

Enhanced electrical energy storage properties in La-doped (Bi0.5Na0.5)0.93Ba0.07TiO3 lead-free ceramics by addition of La2O3 and La(NO3)3

Ceramics

Ultralow thermal conductivity of cerium-doped Nd2Zr2O7 over a wide doping range

Ceramics

High-temperature thermal conductivity of biomorphic SiC/Si ceramics

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Zur Marktübersicht
    Bildnachweise