nach oben

Metallurgist

Erschienen in:

06.08.2022

Mathematical Model of the Accelerated Cooling of Metal in Thick-Plate Hot Rolling

verfasst von: S. I. Platov, S. M. Gorbatyuk, M. L. Lobanov, K. B. Maslennikov, N. V. Urtsev, R. R. Dema, E. Yu Zvyagina

Erschienen in: Metallurgist | Ausgabe 3-4/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The paper describes the issues in predicting the consumer properties of thick-plate pipe products manufactured at the hot rolling mill 5000 of the Magnitogorsk Iron and Steel Works. The modeling of the thermal state of the billet on the mill train during the controlled rolling with subsequent accelerated cooling is also discussed.

The work is mainly focused on the construction of a layer-by-layer cooling trajectory of the billet during accelerated cooling. Some results obtained by this model are compared with those of experimental rolling under the current conditions of the production facility.

Vorheriger Artikel Implementation of Steelmaker’s Assistant Software Module in a Ladle-Furnace Unit

Nächster Artikel Prospects of Extracting Metals from Technogenic Wastes Using Concentrated Solar Radiation

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Steel Pipes for Wires in the Oil and Gas Industry. General Specifications, GOST ISO 3183–2015, replaced GOST of ISO 3183–2012; put in force 06/01/2016.

S. I. Platov, K. B. Maslennikov, V. L. Kornilov, V. A. Nekit, and N. V. Urtsev, “Aspects of microstructure prediction in the production of thick-plate pipe rolled products,” Proizvod. Prokata, No. 11, 6–12 (2019).

E. Weberberger, V. Zayruk, G. Mitter, and R. Konnert, “Increasing the productivity and product quality of the company’s broadband hot rolling mill,” Chern. Metally, No. 1, 26–32 (2008).

S. I. Platov, K. B. Maslennikov, and M. L. Lobanov, Technology for Predicting Strength Characteristics in the Production of Thick-Plate Pipe Rolled Products. Perspective Materials and Technologies, a monograph in 2 volumes, vol. 2, edited by the corresponding member V. V. Rubanik, UO VGTU, Vitebsk (2019).

A. R. Gareev, S. A. Murikov, S. I. Platov, V. N. Urtsev, and A. V. Shmakov, “Calculation of thermomechanical regimes and practical settings of the broadband hot rolling mill during experimental rolling of a complex rolled stock,” Proizvod. Prokata, No. 5, 14–17 (2015).

S. I. Platov, K. B. Maslennikov, and M. L. Lobanov, Influence of Thermomechanical Processing Parameters on the Microstructure of Thick-Plate Pipe Rolled Products, collection of writings of the international symposium Perspective Materials and Technologies, Vitebsk Gos. Tekhnologich. Univ., Vitebsk, 516–517 (2019).

S. P. Romanov, S. M. Gorbatyuk, I. G. Morozova, et al., Certificate 2021610620 RF. Certificate of State Registration of a Computer Program. Program for Automated Control of the Cooling System of Hot Rolling Mill Rolls, applicant National University of Science and Technology “MISiS”, No. 2020666350, appl. 12/10/2020; publ. 01/15/2021. Register of computer programs.

I. A. Artemiev, M. L. Krasnov, G. M. Rusakov, and S. V. Danilov, “Determination of thermal effects of diffusionless phase transformations in low-carbon low-alloy steels at high cooling rates,” Diagn. Res. Mech. Mater. Struct., No. 6, 173–183 (2018); https://doi.org/10.17804/2410-9908.2018.6.173-183.

S. I. Platov, R. R. Dema, and S. I. Lukyanov, “Development and implementation of technology for cooling rolling rolls in order to improve their performance on the broad-strip mill 2000 of Magnitogorsk Iron and Steel Works,” Vest. Magnitogorskogo Gos. Tekhn. Univ. G. I. Nosova, No. 2 (38), 100–101 (2012).

10.

S. I. Platov, K. B. Maslennikov, N. V. Urtsev, et al., “Model of layer-by-layer cooling trajectory in rolled products by TMCP,” Mater. Sci. Forum, 1037, 390–399 (2021); https://doi.org/10.4028/www.scientific.net/MSF.1037.390.CrossRef

11.

I. V. Vier, A. V. Kozyulina, and S. A. Murikov, Mathematical Modeling of Temperature Fields in the Work Rolls of a Hot Rolling Mill, Proceedings Phase and Structural Transformations in Steels, No. 2, ed. V. N. Urtsev, Magnitogorsk, 374–384 (2002).

12.

A. R. Gareev, A. V. Shmakov, S. A. Murikov, V. N. Urtsev, and D. Kh. Devyatov, “Creation of a software package for calculating the thermal state of metal in a hot-rolling-mill line,” Metallurgist, 55, Is. 11–12, 935–940 (2012).

13.

S. A. Snitko, A. V. Yakovchenko, and S. M. Gorbatyuk, “Accounting method for residual technological stresses in modeling the stress-deformed state of a railway wheel disk. Report 2,” Izv. Ferr. Metall., 64(7), 477–483 (2021); https://doi.org/10.17073/0368-0797-2021-7-477-483.

14.

E. A. Maksimov, R. L. Shatalov, “Mathematical model for calculating the parameters of straightening section profiles on a roller straightening machine,” Chernye Metally, No. 6, 14–18 (2021); https://doi.org/10.17580/chm.2021.06.03.CrossRef

15.

I. Pocebneva, Y. Deniskin, A. Yerokhin, V. Artiukh, and V. Vershinin, Simulation of an Aerodynamic Profile with Sections of ad hoc Concavity, E3S Web of Conf., 110, No. 01074 (2019); https://doi.org/10.1051/e3sconf/201911001074.

16.

A. S. Smolyakov, S. I. Shakhov, and R. Kerimov, “Modernization of Baku Steel Company Metallurgical Plant Section CBCM for producing round pipe billets,” Metallurgist, 61, No. 7-8, 543–548 (2017); https://doi.org/10.1007/s11015-017-0530-9.

17.

Y. V. Gamin, S. P. Galkin, B. A. Romantsev, A. N. Koshmin, A. V. Goncharuk, and M. V. Kadach, “Influence of radial-shear rolling conditions on the metal consumption rate and properties of D16 aluminum alloy rods,” Metallurgist, 65, No. 5-6, 650–659 (2021); https://doi.org/10.1007/s11015-021-01202-0.CrossRef

18.

A. N. Shapovalov, R. R. Dema, R. N. Amirov, and O. R. Latypov, “Improvement of the secondary cooling mode for continuous casting of round billets at Ural Steel JSC,” CIS Iron Steel Rev., 22, 15–19 (2021); https://doi.org/10.17580/cisisr.2021.02.03.CrossRef

Titel: Mathematical Model of the Accelerated Cooling of Metal in Thick-Plate Hot Rolling
verfasst von: S. I. Platov
S. M. Gorbatyuk
M. L. Lobanov
K. B. Maslennikov
N. V. Urtsev
R. R. Dema
E. Yu Zvyagina
Publikationsdatum: 06.08.2022
Verlag: Springer US
Erschienen in: Metallurgist / Ausgabe 3-4/2022
Print ISSN: 0026-0894
Elektronische ISSN: 1573-8892
DOI: https://doi.org/10.1007/s11015-022-01348-5

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3-4/2022

Implementation of Steelmaker’s Assistant Software Module in a Ladle-Furnace Unit

Investigation of the Structure of Sintered Blanks from Powder Mixture of R6M5K5 High-Speed Steel Containing Diffusion-Alloyed Powder

Development and Industrial Operation of an Intelligent System to Detect Markings of a Cast Billet at A. A. Ugarov Oskol Electrometallurgical Plant

Nanostructural Analysis and Adsorption Capacity of Blast-Furnace Slags

Electro-Spark Treatment with Low-Melting Al–Si and Al–Ca Electrodes in Order to Improve Wear and Oxidation Resistance of EP741NP Alloy Prepared by Selective Laser Melting

Main Production Methods for Steels of Super Duplex 25Cr Type and Features of Technology for Their Production Under Zlatoust Metallurgical Plant Conditions

Premium Partner

Marktübersichten