nach oben

Experimental Mechanics

Erschienen in:

24.04.2018

Simulation of Pipe-Manufacturing Processes Using Sheet Bending-Flattening

verfasst von: J. Moon, H. J. Jeong, S.-H. Joo, S. S. Sohn, K.-S. Kim, S. Lee, H. S. Kim

Erschienen in: Experimental Mechanics | Ausgabe 6/2018

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this study, a suitable method to simulate pipe-manufacturing processes (i.e., bending, unbending, and flattening) was developed to reproduce the process and the mechanical properties of the pipe. To verify the reliability of the strain distribution and plastic deformation behavior predicted by the proposed method, experimentally-derived strain by digital image correlation (DIC) and finite element analyses were employed. Hardness and tensile tests were performed on bent-flattened specimens. The finite element method confirmed that the proposed method can predict the yield strength of pipes.

Vorheriger Artikel Dynamic Electromechanical Characterization of Ferroelectrics at Cryogenic Temperatures

Nächster Artikel Identification of Heterogeneous Elastoplastic Behaviors Using the Constitutive Equation Gap Method

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Shin SY, Hwang B, Lee S, Kim NJ, Ahn SS (2007) Correlation of microstructure and charpy impact properties in API X70 and X80 line-pipe steels. Mater Sci Eng A 458:281–289CrossRef

Aleshin VV, Kobyakov VV, Seleznev VE (2011) A simulation technology for a full cycle of steel line pipe manufacturing operations. Adv Mech Eng 2011:1–7

Kim NJ (1983) The physical metallurgy of HSLA linepipe steels-a review. JOM 35:21–27CrossRef

Sung HK, Lee DH, Shin SY, Lee S, Ro Y, Lee CS, Hwang B (2015) Effects of finish cooling temperature on tensile properties after thermal aging of strain-based API X60 linepipe steels. Metall Mater Trans A 46:3989–3998CrossRef

Tanguy B, Luu TT, Perrin G, Pineau A, Besson J (2008) Plastic and damage behaviour of a high strength X100 pipeline steel: experiments and modelling. Int J Press Vessel Pip 85:322–335CrossRef

Corona E, Kyriakides S (1988) On the collapse of inelastic tubes under combined bending and pressure. Int J Solids Struct 24:505–535CrossRef

Shanmugam S, Ramisetti NK, Misra RDK, Hartmann J, Jansto SG (2008) Microstructure and high strength-toughness combination of a new 700MPa Nb-microalloyed pipeline steel. Mater Sci Eng A 478:26–37CrossRef

Herynk MD, Kyriakides S, Onoufriou A, Yun HD (2007) Effects of the UOE/UOC pipe manufacturing processes on pipe collapse pressure. Int J Mech Sci 49:533–553CrossRef

Kato C, Otoguro Y, Kado S, Hisamatsu Y (1978) Grooving corrosion in electric resistance welded steel pipe in sea water. Corros Sci 18:61–74CrossRef

10.

Lin M-B, Gao K, Wang C-J, Volinsky AA (2012) Failure analysis of the oil transport spiral welded pipe. Eng Fail Anal 25:169–174CrossRef

11.

Chandel JD, Singh NL (2011) Formation of X-120M line pipe through J-C-O-E technique. Eng 3:400–410CrossRef

12.

API specification 5L (2004) Specification for line pipe. 43rd edn. API, pp 9–16

13.

Walsh WJ, Preston D (2010) Yield strength of line pipe: analysis of forming operations and flattened straps. 8th Int. pipeline Conf. Calgary, Alberta, Canada, pp 891-905

14.

Huang XP, Cui WC (2006) Effect of Bauschinger effect and yield criterion on residual stress distribution of autofrettaged tube. J Press Vessel Technol 128:212–216CrossRef

15.

Kostryzhev A, Strangwood M, Davis CL (2007) Influence of microalloying precipitates on Bauschinger effect during UOE forming of line pipe steels. Mater Sci Technol 22:166–172

16.

Kostryzhev A, Strangwood M, Davis CL (2010) Mechanical property development during UOE forming of large diameter pipeline steels. Mater Manuf Process 25:41–47CrossRef

17.

Han SY, Sohn SS, Shin SY, Bae J-H, Kim HS, Lee S (2012) Effects of microstructure and yield ratio on strain hardening and Bauschinger effect in two API X80 linepipe steels. Mater Sci Eng A 551:192–199CrossRef

18.

Sohn SS, Han SY, Shin SY, Bae J-H, Kim K, Kim NJ, Kim HS, Lee S (2012) Analysis and estimation of yield strength of API X80 linepipe steel pipe by low-cycle fatigue tests. Met Mater Int 18:597–606CrossRef

19.

Hu SJ, Marciniak Z, Duncan JL (2002) Mechanics of sheet metal forming, 2nd edn. Butterworth-Heinemann, Oxford, pp 82–107

20.

Sohn SS, Han SY, Shin SY, Bae J-H, Lee S (2013) Analysis and estimation of the yield strength of API X70 and X80 linepipe steels by double-cycle simulation tests. Met Mater Int 19:377–388CrossRef

21.

Choi MK, Huh H (2014) Effect of punch speed on amount of springback in U-bending process of auto-body steel sheets. Proced Eng 81:963–968CrossRef

22.

Lim H, Lee MG, Sung JH, Kim JH, Wagoner RH (2012) Time-dependent springback of advanced high strength steels. Int J Plast 29:42–59CrossRef

23.

ASTM E 8–04 (2005) Standard test methods for tension testing of metallic materials. Annual book of ASTM standards. American Society for Testing and Materials, Philadelphia

24.

Maximov JT, Duncheva GV, Kuzmanov TV (2008) Modelling of hardening behaviour of cold expanded holes in medium-carbon steel. J Constr Steel Res 64:261–267CrossRef

25.

Altan T, Tekkaya AE (2012) Sheet metal forming: fundamentals. ASM Int, Ohio, pp 89–98

26.

Li W, Shi S, Wang F, Zhang Z, Ma T, Li J (2012) Numerical simulation of friction welding processes based on ABAQUS environment. J Eng Sci Technol Rev 5:10–19

27.

Dassault Systémes Simulia Corp. (2013) Abaqus 6.12 Documentation. Providence, RI, USA

28.

Zhang LC, Lu G, Leong SC (1997) V-shaped sheet forming by deformable punches. J Mater Process Technol 63:134–139CrossRef

29.

Pavlina EJ, Van Tyne CJ (2008) Correlation of yield strength and tensile strength with hardness for steels. J Mater Eng Perform 17:888–893CrossRef

30.

Choi CW, Koh HJ, Lee S (2000) Analysis and prevention of yield strength drop during spiral piping of two high-strength API-X70 steels. Metall Mater Trans A 31:2669–2674CrossRef

31.

Zou T, Li D, Wu G, Peng Y (2016) Yield strength development from high strength steel plate to UOE pipe. Mater Design 89:1107–1122CrossRef

Titel: Simulation of Pipe-Manufacturing Processes Using Sheet Bending-Flattening
verfasst von: J. Moon
H. J. Jeong
S.-H. Joo
S. S. Sohn
K.-S. Kim
S. Lee
H. S. Kim
Publikationsdatum: 24.04.2018
Verlag: Springer US
Erschienen in: Experimental Mechanics / Ausgabe 6/2018
Print ISSN: 0014-4851
Elektronische ISSN: 1741-2765
DOI: https://doi.org/10.1007/s11340-018-0397-0

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 6/2018

Signal Gain Mechanism for a Hollow Transmission Pressure bar with an end cap

A Unified Potential Drop Calibration Function for Common Crack Growth Specimens

Experimental Characterization of the Shear Properties of 3D–Printed ABS and Polycarbonate Parts

Ultraviolet Diffraction Assisted Image Correlation (UV-DAIC) for Single-Camera 3D Strain Measurement at Extreme Temperatures

Mechanical Characterization of a Convex Shell (Contact Lens) with Meridional Thickness Variation

Study of Photoplastic Behaviour of Polycarbonate using Digital Image Correlation

Premium Partner

Marktübersichten