Skip to main content
Fachgebiete
Automobil + Motoren Bauwesen + Immobilien Business IT + Informatik Elektrotechnik + Elektronik Energie + Nachhaltigkeit Finance + Banking Management + Führung Marketing + Vertrieb Maschinenbau + Werkstoffe Versicherung + Risiko
DE
EN
Themenseiten
Organisationspsychologie Projektmanagement Marketing Smart Manufacturing
Bücher
Zeitschriften
Weitere Formate
Podcasts Webinare Technik Webinare Wirtschaft Kongresse Veranstaltungskalender Awards
Jetzt Einzelzugang starten
Zugang für Unternehmen
Referenzkunden
ATZ-Fachkongress

Chassis.tech plus 2024


4 Kongresse in einer Veranstaltung

Treffen Sie in München die Fachleute von Chassis, Lenkung, Bremsen sowie Reifen/Räder.
Erweiterte Suche
Anmelden
nach oben
Metallurgical and Materials Transactions A
Erschienen in: Metallurgical and Materials Transactions A 12/2011

01.12.2011 | Symposium: Austenite Formation and Decomposition IV

Austenite Stability Effects on Tensile Behavior of Manganese-Enriched-Austenite Transformation-Induced Plasticity Steel

verfasst von: P. J. Gibbs, E. De Moor, M. J. Merwin, B. Clausen, J. G. Speer, D. K. Matlock

Erschienen in: Metallurgical and Materials Transactions A | Ausgabe 12/2011

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Manganese enrichment of austenite during prolonged intercritical annealing was used to produce a family of transformation-induced plasticity (TRIP) steels with varying retained austenite contents. Cold-rolled 0.1C-7.1Mn steel was annealed at incremental temperatures between 848 K and 948 K (575 °C and 675 °C) for 1 week to enrich austenite in manganese. The resulting microstructures are comprised of varying fractions of intercritical ferrite, martensite, and retained austenite. Tensile behavior is dependent on annealing temperature and ranged from a low strain-hardening “flat” curve to high strength and ductility conditions that display positive strain hardening over a range of strain levels. The mechanical stability of austenite was measured using in-situ neutron diffraction and was shown to depend significantly on annealing temperature. Variations in austenite stability between annealing conditions help explain the observed strain hardening behaviors.
Vorheriger Artikel Effect of Heating Rate on the Austenite Formation in Low-Carbon High-Strength Steels Annealed in the Intercritical Region
Nächster Artikel ALEMI: A Ten-Year History of Discussions of Alloying-Element Interactions with Migrating Interfaces

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Jetzt informieren
Fußnoten
1
THERMO-CALC is a trademark of Thermo-Calc, Stockholm.
 
Literatur
1.
“Advanced High Strength Steel Application Guidelines,” International Iron and Steel Institute, Committee on Automotive Applications, Middletown, OH, www.​worldautosteel.​org
2.
E. De Moor, P.J. Gibbs, J.G. Speer, J.G. Schroth, and D.K. Matlock: Iron Steel Technol., 2010, Nov., pp. 1–11.
3.
D.K. Matlock and J.G. Speer: Proc. 3rd Int. Conf. on New Developments in Advanced High-Strength Steels. H.C. Lee, ed., Korean Institute of Metals and Materials, Seoul, 2006, pp. 774–81.
4.
D.K. Matlock and J.G. Speer: Proc. Microstructure and Texture in Steels and Other Materials, A. Haldar, S. Suwas, and B. Bhattacharjee, eds., Springer, London, 2009, pp. 185–205.
5.
D.K. Matlock, P.J. Gibbs, J.G. Speer, R.H. Wagoner, and J.G. Schroth: Proc. NSF CMMI Research and Innovation Conf., NSF, Washington DC, 2009, paper for Grant No. 0729114.
6.
E. De Moor, D.K. Matlock, J.G. Speer, and M.J. Merwin: Scripta Metall., 2010, vol. 64, pp. 185–88.CrossRef
7.
THERMO-CALC Tcw5.0.2.30, Computer Software, Thermo-Calc Software AB, PC, Stockholm, Sweden, 2009.
8.
B. Lee and B. Sundman: THERMO-CALC Steels Database V2, Scientific Group Thermodata Europe, Stockholm, Sweden, 1999.
9.
10.
H. Huang, O. Matsumura, and T. Furukawa: Mater. Sci. Technol., 1994, vol. 10 (7), pp. 621–26.
11.
M.J. Merwin: SAE Technical Paper No. 2007-01-0336, SAE, Warrendale, PA, 2007.
12.
M.J. Merwin: Mater. Sci. Forum, 2007, vols. 539–543, pp. 4327–32.CrossRef
13.
M.J. Merwin: Proc. MS&T 2007, Detroit, MI, Sept. 16–20, 2007, pp. 515–36.
14.
T. Furukawa, H. Huang, and O. Matsumura: Mater. Sci. Technol., 1994, vol. 10 (11), pp. 964–69.
15.
D. Shu, S. Park, C. Lee, and S. Kim: Metall. Mater. Trans. A, 2008, vol. 40A, pp. 264–68.
16.
17.
S.W. Lee, K.Y. Lee, and B.C. De Cooman: Mater. Sci. Forum, Jun. 2010, vols. 654–656, pp. 286–89.CrossRef
18.
B.C. De Cooman, S Lee, and S.S. Kumar: Proc. 2nd Int. Conf. on Super-High Strength Steels, Associacione Italiana di Metalluricia, Verona, Italy, Oct. 17–20, 2010.
19.
G.B. Olson and M. Cohen: Metall. Trans. A, 1975, vol. 6A, pp. 791–95.
20.
J. Burke: Kinetics of Phase Transformations in Metals, 1st ed., Pergamon Press, Oxford, United Kingdom, 1965, pp. 51–52.
21.
O. Matsumura, Y. Sakuma, and H. Takechi: Scripta Metall., 1987, vol. 21, pp. 1301–06.CrossRef
22.
L. Samek, E. De Moor, J. Penning, and B.C. De Cooman: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 109–24.CrossRef
23.
E. De Moor, S. Lacroix, A.J. Clarke, J. Penning, and J.G. Speer: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2568–95.
24.
2008 Annual Book of ASTM Standards, vol. 03.01, Metals-Mechanical Testing; Elevated and Low Temperature Testing; Metallography, “Standard Test Methods for Tension Testing of Metallic Materials,” ASTM E-8/E 8M–08, ASTM, Philadelphia, PA, pp. 64–88.
25.
M. Bourke, D.C. Dunand, and E. Ustundag: Appl. Phys. A: Mater. Sci. Proc., 2002, vol. 74, pp. S1707–S1709.CrossRef
26.
27.
A.C. Larson and R.B. Von Dreele: “GSAS. General Structure Analysis System,” Report No. LAUR 86-748, Los Alamos National Laboratory, Los Alamos, NM, 1986.
28.
29.
C. Crussard: Rev. Metall. (Paris), 1953, vol. 10, pp. 697–710.
30.
D.K. Matlock, G. Krauss, and F. Zia Ebrahimi: in Deformation, Processing, and Structure, G. Krauss ed., ASM, Metals Park, OH, 1984, pp. 47 and 87.
31.
W.B. Morrison and R.L. Miller: Proc. Ultrafine-Grain Metals, J.J. Burke, ed., Syracuse, NY, 1970, pp. 183–211.
32.
D.K. Matlock, G. Krauss, L.F. Ramos, and G.S. Huppi: in Structure and Properties of Dual Phase Steels, R.A. Kot and J.W. Morris, eds., TMS-AIME, Warrendale, PA, 1979, pp. 62 and 90.
33.
H. Han, C. Oh, G. Kim, and O. Kwon: Mater. Sci. Eng. A, 2009, vol. 499, pp. 462–68.CrossRef
34.
T. Nakamura and K. Wakasa: Tetsu-to-Hagané, 1975, vol. 61, p. 69.
35.
D.C. Ludwigson and J.A. Burger: J. Iron Steel Inst., 1969, vol. 192, p. 63.
36.
T. Angel: J. Iron Steel Inst., 1954, vol. 177, p. 165.
37.
H. Schumann: Arch. Eisenhüttenwes, 1967, vol. 38 (8), pp. 647–56.
38.
Q. Gu, J. Van Humbeeck, and L. Delaey: J. de Phys. IV, 1994, pp. C3-135–C3-144.
39.
S.-J. Lee, S. Lee, and B.C. De Cooman: Scripta Metall., 2010, vol. 64, pp. 649–52.CrossRef
40.
G. Frommeyer, U. Brüx, and P. Neumann: ISIJ Int., 2003, vol. 43, pp. 438–46.CrossRef
41.
42.
G.B. Olson: in Structure and Properties of Dual Phase Steels, R.A. Kot and J.W. Morris, eds., TMS-AIME, Warrendale, PA, 1979, pp. 391–424.
43.
G.B. Olson and M. Cohen: Metall. Trans. A, 1982, vol. 13A, pp. 1907–14.
44.
45.
P. Hodgson, M.R. Hickson, and R.K. Gibbs: Mater. Sci. Forum, 1998, vols. 284–286, pp. 63–72.CrossRef
46.
R. Song, D. Ponge, D. Raabe, J.G. Speer, and D.K. Matlock: Mater. Sci. Eng. A, 2006, vol. 441, pp. 1–17.CrossRef
47.
48.
L. Brake, G. Mertens, J. Penning, B.C. De Cooman, M. Liebeherr, and N. Akdut: Metall. Mater. Trans. A, 2006, vol. 37A, pp, 307–17.CrossRef
49.
50.
Y.K. Lee and C.S. Choi: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 355–60.CrossRef
Metadaten
Titel
Austenite Stability Effects on Tensile Behavior of Manganese-Enriched-Austenite Transformation-Induced Plasticity Steel
verfasst von
P. J. Gibbs
E. De Moor
M. J. Merwin
B. Clausen
J. G. Speer
D. K. Matlock
Publikationsdatum
01.12.2011
Verlag
Springer US
Erschienen in
Metallurgical and Materials Transactions A / Ausgabe 12/2011
Print ISSN: 1073-5623
Elektronische ISSN: 1543-1940
DOI
https://doi.org/10.1007/s11661-011-0687-y

Weitere Artikel der Ausgabe 12/2011

Metallurgical and Materials Transactions A 12/2011 Zur Ausgabe

Symposium: Austenite Formation and Decomposition IV

Nitrogen Effects in Dual-Phase Sheet Steel

Symposium: Austenite Formation and Decomposition IV

Effect of Heating Rate on the Austenite Formation in Low-Carbon High-Strength Steels Annealed in the Intercritical Region

OriginalPaper

Notched Tensile and Impact Fracture of Ti-15-3 Laser Welds

Symposium: Austenite Formation and Decomposition IV

Localized Deformation in Multiphase, Ultra-Fine-Grained 6 Pct Mn Transformation-Induced Plasticity Steel

Symposium: Austenite Formation and Decomposition IV

Kinetic Transition during Ferrite Growth in Fe-C-Mn Medium Carbon Steel

Symposium: Austenite Formation and Decomposition IV

Quenched and Partitioned Microstructures Produced via Gleeble Simulations of Hot-Strip Mill Cooling Practices

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Zur Marktübersicht
    Bildnachweise