Skip to main content
Fachgebiete
Automobil + Motoren Bauwesen + Immobilien Business IT + Informatik Elektrotechnik + Elektronik Energie + Nachhaltigkeit Finance + Banking Management + Führung Marketing + Vertrieb Maschinenbau + Werkstoffe Versicherung + Risiko
DE
EN
Themenseiten
Organisationspsychologie Projektmanagement Marketing Smart Manufacturing
Bücher
Zeitschriften
Weitere Formate
Podcasts Webinare Technik Webinare Wirtschaft Kongresse Veranstaltungskalender Awards
Jetzt Einzelzugang starten
Zugang für Unternehmen
Referenzkunden
ATZ-Fachkongress

Chassis.tech plus 2024


4 Kongresse in einer Veranstaltung

Treffen Sie in München die Fachleute von Chassis, Lenkung, Bremsen sowie Reifen/Räder.
Erweiterte Suche
Anmelden
nach oben
Metallurgical and Materials Transactions B
Erschienen in: Metallurgical and Materials Transactions B 6/2019

04.09.2019

In Situ Observation of Acicular Ferrite Nucleation and Growth at Different Cooling Rate in Ti-Zr Deoxidized Steel

verfasst von: Yongkun Yang, Dongping Zhan, Hong Lei, Guoxing Qiu, Yulu Li, Zhouhua Jiang, Huishu Zhang

Erschienen in: Metallurgical and Materials Transactions B | Ausgabe 6/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

The effects of cooling rate on acicular ferrite (AF) nucleation, growth, and inclusion characteristics in Ti-Zr deoxidation steel were studied by utilizing the high temperature confocal laser scanning microscope (HT-CLSM). The results indicated that with the increase of cooling rate, the ferrite start nucleation temperature decreased, and the difference of first nucleation temperature between AF and ferrite side plate (FSP) reduced. When the cooling rate increased to 10.0 °C/s, AF and FSP simultaneously nucleated at 564.5 °C. In addition, the AF actual growth rate rose with the increase of cooling rate and reached 30.13 µm/s at 10.0 °C/s cooling rate. The AF ratio in microstructure increased first and then decreased with the cooling rate increase and was up to the maximum 45.83 pct at 1.0 °C/s cooling rate. For inclusion characteristics, cooling rates had no obvious effect on inclusion types, but had a great influence on inclusions size distribution. With the cooling rate increase, the inclusion average diameter reduced, and diminished to 1.39 µm at 10.0 °C/s cooling rate. Finally, the AF nucleation on the Ti-Zr-Mn-O-S + TiN inclusion could be explained by the low lattice misfit between ferrite and TiN that precipitated on the Ti-Zr-Mn-O-S inclusion surface.
Vorheriger Artikel Experimental and Numerical Study of Coating Thickness Using Multi-slot Air Knives
Nächster Artikel Investigation on the Surface Vortex Formation During Mechanical Stirring with an Axial-Flow Impeller Used in an Aluminum Process

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Jetzt informieren
Literatur
1.
S. S. Babu, H. K. D. H. Bhadeshia:, Mater. T. JIM, 1991, vol. 32, pp. 679-88.
2.
S. Ohkita, Y. Horii: ISIJ Int., 1995, vol. 35, pp. 1170-82.
3.
B. W. Zhou, G. Q. Li, X. L. Wan, Y. Li, K. M. Wu: Met. Mater. Int., 2016, vol. 22, pp. 267-75.
4.
Y. Shao, C. X. Liu, Z. S. Yan, H. J. Li, Y. C. Liu: J. Mater. Sci. Technol., 2018, vol. 34, pp. 737-44.
5.
W. M. Mu, P. G. Jönsson, K. Nakajima: High Temp. Mat. Proc., 2017, vol. 36, pp. 309-25.
6.
D. S. Sarma, A. V. Karasev, P. G. Jönsson: ISIJ Int., 2009, vol. 49, pp. 1063-74.
7.
X. F. Zhang, P. Han, H. Terasaki, M. Sato, Y. Komizo: J. Mater. Sci. Technol., 2012, vol. 28, pp. 241-48.
8.
D. Zhang, Y. Shintaku, S. Suzuki, Y. Komizo: J. Mater. Sci., 2012, vol. 47, pp. 5524-28.
9.
M. M. Song, B. Song, S. H. Zhang, Z. B. Yang, Z. L. Xue, S. Q. Song, R. S. Xu, Z. B. Tong: J. Iron. Steel Res. Int., 2018, vol. 25, pp. 1033-42.
10.
Z. Z. Liu, Y. Kobayashi, F. Yin, M. Kuwabara, K. Nagai: ISIJ Int., 2007, vol. 47, pp. 1781-88.
11.
Q. Huang, X. H. Wang, M. Jiang, Z. Y. HU: Steel Res. Int., 2016, vol. 87, pp. 445-55.
12.
M. M. Song, B. Song, C. L. Hu, W. B. Xin, G. Y. Song: ISIJ Int., 2015 vol. 55, pp. 1468-73.
13.
M. Fattahi, N. Nabhani, M. Hosseini, N. Arabian, E. Rahimi: Micron, 2013, vol. 45, pp. 107-14.
14.
J. Pu, S. F. Yu, Y. Y. Li: J. Alloy Compd., 2017, vol. 692, pp. 351-58.
15.
J. M. Gregg, H. K. D. H. Bhadeshia: Acta Mater., 1997, vol. 45, pp. 739-48.
16.
Y. Morikage, K. Oi, F. Kawabata, K. Amano: Tetsu-to-Hagané, 1998, vol. 84, pp.510-15.
17.
W. Z. Mu, P. G. Jönsson, K. Nakajima: J. Mater. Sci., 2016, vol. 51, pp. 2168-80.
18.
J. H. Shim, Y. W. Cho, S. H. Chung, J. D. Shim, D. N. Lee: Acta Mater., 1999, vol. 47, pp. 2751-60.
19.
L. Cheng, C. Xu, L. L. Lu, L. Yu, K. M. Wu: J. Alloy Compd., 2018, vol. 742, pp. 112-22.
20.
W. Z. Mu, P. G. Jönsson, K. Nakajima: ISIJ Int., 2014, vol. 54, pp. 2907-16.
21.
I. Madariaga, J. L. Romero, I. Gutiérrez: Metall. Mater. Trans. A, 1998, vol. 29, pp. 1003-15.
22.
X. B. Li, Y. Min, C. J. Liu, M. F. Jiang: Steel Res. Int., 2016, vol. 87, pp. 622-32.
23.
C. K. Lin, Y. C. Pan, Y. H. F. Su, G. R. Lin, W. S. Hwang, J. C. Kuo: Mater. Charact., 2018, vol. 141, 318-27.
24.
Z. Zhang, R. A. Farrar: Mater. Sci. Technol., 1996, vol. 12, pp. 237-60.
25.
W. Z. Mu, H. H. Mao, P. G. Jönsson, K. Nakajima: Steel Res. Int., 2016, vol. 87, pp. 311-19.
26.
B. Wen, B. Song, N. Pan, Q. Y. Hu, J. H. Mao: Ironmaking Steelmaking, 2011, vol. 38, pp. 577-83.
27.
S. H. Zhang, N. Hattori, M. Enomoto, T. Tarui: ISIJ Int., 1996, vol. 36, pp. 1301-09.
28.
B. L. Bramfitt: Metall. Mater. Trans. B, 1970, vol. 1, pp. 1987-95.
29.
M. Militzer, R. Pandi, E. B. Hawbolt: Metall. Mater. Trans. A, 1996, vol. 27, pp. 1547-56.
30.
C. J. Shang, L. J. Hu, S. W. Yang, X. M. Wang, Y. T. Zhao, X. L. He: Acta Metall. Sin., 2005, vol. 41, pp. 471-76.
31.
G. Thewlis, J. A. Whiteman, D. J. Senogles: Mater. Sci. Technol., 1997, vol. 13, pp. 257-74.
32.
Y. C. Liu, D. J. Wang, F. Sommer, E. J. Mittemeijer: Acta Mater., 2008, vol. 56, pp. 3833-42.
33.
Y. J. Kang, S. H. Jeong, J. H. Kang, C. H. Lee: Metall. Mater. Trans. A, 2016, vol. 47, pp. 2842-54.
34.
W. Z. Mu, P. Hedström, H. Shibata, P. G. Jönsson, K. Nakajima: JOM, 2018, vol. 70, pp. 2283-95.
35.
W. Z. Mu, N. Dogan, K. S. Coley: JOM, 2018, vol. 70, pp. 1199-09.
36.
T. Hanamura, H. Shibata, Y. Waseda, H. Nakajima, S. Torizuka, T. Takanashi, K. Nagai: ISIJ Int., 1999, vol. 39, pp. 1188-93.
37.
D. Zhang, H. Terasaki, Y. Komizo: Acta Mater., 2010, vol. 58, pp. 1369-78.
38.
W. Z. Mu, H. Shibata, P. Hedström, P. G. Jönsson, K. Nakajima: Steel Res. Int., 2016, vol. 87, pp. 10-14.
39.
X. D. Zou, J. C. Sun, H. Matsuura, C. Wang: Metall. Mater. Trans. B, 2018, vol. 49, pp. 2168-73.
40.
M. Wakoh, T. Sawai, S. Mizoguchi: Tetsu-to-Hagané, 1996, vol. 82, pp. 593-98.
41.
X. L. Wan, K. M. Wu, G. Huang, R. Wei, L. Cheng: Int. J. Min. Met. Mater., 2014, vol. 21, pp. 878-85.
42.
D. Zhang, Y. Shintaku, S. Suzuki, Y. Komizo: Metall. Mater. Trans. A, 2012, vol. 43, pp. 447-58.
43.
I. deS. Bott, P. R. Rios: Scripta Mater., 1998, vol. 38, pp. 1269-74.
44.
J. S. Liu, J. Yanagimoto: ISIJ Int., 2007, vol. 47, pp. 1188-94.
45.
J. S. Byun, J. H. Shim, Y. W. Cho, D. N. Lee: Acta Mater., 2003, vol. 51, pp. 1593-06.
46.
H. K. D. H. Bhadeshia, J. W. Christian: Metall. Mater. Trans. A, 1990, vol. 21, pp. 767-97.
47.
L. Cheng, K. M. Wu: Acta Mater., 2009, vol. 57, pp. 3754-62.
48.
M. M. Hosseinioun, G. Moeini: Mater. Test., 2016, vol. 58, pp. 848-59.
49.
K. M. Wu, Y. Inagawa, M. Enomoto: Mater. Charact., 2004, vol. 52, pp. 121-27.
50.
C. K. Lin, Y. C. Pan, W. S. Hwang, Y. C. Fang, Y. H. Su, G. R. Lin, Y. F. Wu: Ironmaking Steelmaking, 2019, vol. 46, pp. 176-83.
51.
N. Kikuchi, S. Nabeshima, T. Yamashita, Y. Kishimoto, S. Sridhar, T. Nagasaka: ISIJ Int., 2011, vol. 51, pp. 2019-28 .
52.
S. S. Babu: Curr. Opin. Solid. St. M., 2004, vol. 8, pp. 267-78.
53.
H. H. Jin, J. H. Shim, Y. W. Cho, H. C. Lee: ISIJ Int., 2003, vol. 43, pp. 1111-13.
54.
Y. Tomita, N. Saito, T. Tsuzuki, Y. Tokunaga, K. Okamoto: ISIJ Int., 1994, vol. 34, pp. 829-35
Metadaten
Titel
In Situ Observation of Acicular Ferrite Nucleation and Growth at Different Cooling Rate in Ti-Zr Deoxidized Steel
verfasst von
Yongkun Yang
Dongping Zhan
Hong Lei
Guoxing Qiu
Yulu Li
Zhouhua Jiang
Huishu Zhang
Publikationsdatum
04.09.2019
Verlag
Springer US
Erschienen in
Metallurgical and Materials Transactions B / Ausgabe 6/2019
Print ISSN: 1073-5615
Elektronische ISSN: 1543-1916
DOI
https://doi.org/10.1007/s11663-019-01668-z

Weitere Artikel der Ausgabe 6/2019

Metallurgical and Materials Transactions B 6/2019 Zur Ausgabe

OriginalPaper

Highly Efficient Separation/Recycling Palladium(II) Ions from Aqueous Solutions by Silica Gel-Coated Graphene Oxide Modified with Mercapto Groups

OriginalPaper

Microstructure and Properties of Inconel 718 Fabricated by Directed Energy Deposition with In-Situ Ultrasonic Impact Peening

OriginalPaper

The Decarburization Kinetics of Metal Droplets in Emulsion Zone

OriginalPaper

The Effect of Melt Ultrasound Treatment on the Microstructure and Age Hardenability of Al-4 Wt Pct Cu/TiC Composite

OriginalPaper

Cationic Effect of Ferrous Ions on Sulfide Capacity of CaO-FetO-Al2O3-SiO2 Slag System

OriginalPaper

Numerical Prediction of Oscillation Behaviors of a Multiphase Core–Shell Droplet During Interfacial Tension Measurement

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Zur Marktübersicht
    Bildnachweise