nach oben

Journal of Materials Engineering and Performance

Erschienen in:

01.11.2014

Three-Dimensional Visualization of Material Flow During Friction Stir Welding of Steel and Aluminum

verfasst von: Yoshiaki Morisada, Takuya Imaizumi, Hidetoshi Fujii, Muneo Matsushita, Rinsei Ikeda

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 11/2014

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Material flow is a key phenomenon to obtain sound joints by friction stir welding (FSW), and it is highly dependent of the welded material. It is well known that the optimal FSW condition depends on the welded material. However, the material flow during FSW has not been totally clarified in spite of many researches. Especially, the material flow of steel during FSW is still unclear. It seems difficult to understand the material flow by the traditional method such as the tracer method or observation of the microstructure in the stir zone. Therefore, in this study, the material flow of steel was three dimensionally visualized by x-ray radiography using two pairs of x-ray transmission real-time imaging systems, and was then compared with the material flow of aluminum. The result revealed the effect of the welded material on the material flow during FSW.

Vorheriger Artikel Microstructure and Mechanical Properties of Friction Stir-Welded Mg-2Nd-0.3Zn-0.4Zr Magnesium Alloy

Nächster Artikel Sulfide Stress Cracking and Electrochemical Corrosion of Precipitation Hardening Steel After Plasma Oxy-Nitriding

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P. Temple-Smith, C.J. Dawes, International Patent Application No. PCT/GB92/02203, 1991

C.J. Dawes and W.M. Thomas, Friction Stir Process Welds Aluminum Alloys, Weld. J., 1996, 75, p 41–47

S.H.C. Park, Y.S. Sato, and H. Kokawa, Effect of Micro-texture on Fracture Location in Friction Stir Weld of Mg Alloy AZ61 During Tensile Test, Scripta Mater., 2003, 49, p 161–166CrossRef

H.J. Liu, H. Fujii, M. Maeda et al., Tensile Properties and Fracture Locations of Friction Stir Welded Joints of 2017-T351 Aluminum Alloy, J. Mater. Process. Technol., 2003, 142, p 692–696CrossRef

K.E. Knipstron and B. Pekkari, Friction Stir Welding Process Goes Commercial, Weld. J., 1997, 76, p 55–63

A. Heidarzadeha, H. Khodaverdizadeha, A. Mahmoudia et al., Tensile Behavior of Friction Stir Welded AA 6061-T4 Aluminum Alloy Joints, Mater. Des., 2012, 37, p 166–173CrossRef

G. Liu, L.E. Murr, C.-S. Niou et al., Microstructural Aspects of the Friction-Stir Welding of 6061-T6 Aluminum, Scripta Mater., 1997, 37, p 355–361CrossRef

G. Çam and S. Mıstıkoğlu, Recent Developments in Friction Stir Welding of Al-Alloys, J. Mater. Eng. Perform., 2014, 23, p 1936–1953CrossRef

G. Çam, Friction Stir Welded Structural Materials: Beyond Al-Alloys, Int. Mater. Rev., 2011, 56, p 1–48CrossRef

10.

A.P. Reynolds, W. Tang, T. Gnaupel-Herold et al., Structure, Properties, Residual Stress of 304L Stainless Steel Friction Stir Welds, Scripta Mater., 2003, 48, p 1289–1294CrossRef

11.

S.H.C. Park, Y.S. Sato, H. Kokawa et al., Rapid Formation of the Sigma Phase in 304 Stainless Steel During Friction Stir Welding, Scripta Mater., 2003, 49, p 1175–1180CrossRef

12.

R. Ueji, H. Fujii, L. Cui et al., Friction Stir Welding of Ultrafine Grained Plain Low-Carbon Steel Formed by the Martensite Process, Mater. Sci. Eng. A, 2006, 423, p 324–330CrossRef

13.

H. Fujii, L. Cui, N. Tsuji et al., Friction Stir Welding of Carbon Steel, Mater. Sci. Eng. A, 2006, 429, p 50–57CrossRef

14.

Y. Morisada, H. Fujii, T. Mizuno et al., Nanostructured tool Steel Fabricated by Combination of Laser Melting and Friction Stir Processing, Mater. Sci. Eng. A, 2009, 505, p 157–162CrossRef

15.

Y. Morisada, H. Fujii, T. Mizuno et al., Modification of Nitride Layer on Cold-Work Tool Steel by Laser Melting and Friction Stir Processing, Surf. Coat. Techol., 2009, 204, p 386–390CrossRef

16.

W.M. Thomas, P.L. Threadgill, and E.D. Nicholas, Feasibility of Friction Stir Welding Steel, Sci. Technol. Weld. Join., 1999, 4, p 365–372CrossRef

17.

P.J. Konkol, J.A. Mathars, R. Johnson et al., Friction Stir Welding of HSLA-65 Steel for Shipbuilding, J. Ship Prod., 2003, 19, p 159–164

18.

T.J. Lienert, W.L. Stellwag, B.B. Grimmett et al., Friction Stir Welding Studies on Mild Steel, Weld. J., 2003, 82, p 1s–9sCrossRef

19.

S.H.C. Park, Y.S. Sato, H. Kokawa et al., Rapid Formation of the Sigma Phase in 304 Stainless Steel During Friction Stir Welding, Scripta Mater., 2003, 49, p 1175–1180CrossRef

20.

K. Colligan, Material Flow Behavior During Friction Stir Welding of Aluminum, Weld. Res., 1999, 78, p 229–237

21.

M. Guerra, C. Schmidta, J.C. McClurea et al., Flow Patterns During Friction Stir Welding, Mater. Charact., 2003, 49, p 95–101CrossRef

22.

Y. Li, L.E. Murr, and J.C. McClure, Flow Visualization and Residual Microstructures Associated with the Friction-Stir Welding of 2024 Aluminum to 6061 Aluminum, Mater. Sci. Eng. A, 1999, 271, p 213–219CrossRef

23.

P. Su, A. Gerlich, T.H. North et al., Intermixing in Dissimilar Friction Stir Spot Welds, Metall. Mater. Trans. A, 2007, 38A, p 584–595CrossRef

24.

B.C. Liechty and B.W. Webb, The Use of Plasticine as an Analog to Explore Material Flow in Friction Stir Welding, J. Mater. Process. Technol., 2007, 184, p 240–250CrossRef

25.

G. Buffa, J. Huaa, R. Shivpuri et al., Design of the Friction Stir Welding Tool Using the Continuum Based FEM Model, Mater. Sci. Eng. A, 2006, 419, p 381–388CrossRef

26.

Y. Shimoda, M. Tsubai, T. Yasui et al., Experimental and Numerical Studies of Material Flow During Welding by Friction Stirring, J. Jpn. Weld. Soc., 2011, 29, p 114–118CrossRef

27.

H. Pashazadeh, J. Teimournezhad, and A. Masoumi, Numerical investigation on the Mechanical, Thermal, Metallurgical and Material Flow Characteristics in Friction Stir Welding of Copper Sheets with Experimental Verification, Mater. Des., 2014, 55, p 619–632CrossRef

28.

G.Q. Chen, Q.Y. Shi, Y. Fujiya et al., Simulation of Metal Flow During Friction Stir Welding Based on the Model of Interactive Force Between Tool and Material, J. Mater. Eng. Perform., 2014, 23, p 1321–1328CrossRef

29.

Y. Morisada, H. Fujii, Y. Kawahito et al., Three-Dimensional Visualization of Material Flow During Friction Stir Welding by Two Pairs of X-ray Transmission Systems, Scripta Mater., 2011, 65, p 1085–1088CrossRef

30.

Y. Morisada, H. Fujii, T. Nagaoka et al., Fullerene/A5083 Composites Fabricated by Material Flow During Friction Stir Processing, Composites A, 2007, 38, p 2097–2101CrossRef

31.

Y. Morisada, T. Imaizumi, and H. Fujii, Clarification of Defect Formation Mechanism in Friction Stir Welding by X-ray Radiography, J. Jpn. Weld. Soc., 2014, 32, p 31–37CrossRef

Titel: Three-Dimensional Visualization of Material Flow During Friction Stir Welding of Steel and Aluminum
verfasst von: Yoshiaki Morisada
Takuya Imaizumi
Hidetoshi Fujii
Muneo Matsushita
Rinsei Ikeda
Publikationsdatum: 01.11.2014
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 11/2014
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-014-1202-6

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 11/2014

Texture Optimization for Intermediate Si-Containing Non-oriented Electrical Steel

Corrosion Resistance Enhancement of AZ91D Magnesium Alloy by Electroless Ni-Co-P Coating and Ni-Co-P-SiO2 Nanocomposite

Inverse Thermal Analysis of Ti-6Al-4V Deep-Penetration Welds Using Volumetric Constraints

Microstructure and Corrosion Behavior of Electrodeposited Ni-Co-ZrC Coatings

Effect of Ultrasonic Shot Peening on Microstructure and Mechanical Properties of High-Nitrogen Austenitic Stainless Steel

Sintering Behavior and Mechanical Properties of NiAl, Al2O3, and NiAl-Al2O3 Composites

Premium Partner

Marktübersichten