nach oben

Journal of Materials Engineering and Performance

Erschienen in:

10.08.2021

Combined Effect of Microstructure and Gaseous Environments on Oxidative and Adhesive Wear of Dual-Phase Steel

verfasst von: Y. Zhang, A. Jourani

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 12/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Wear tests on dual-phase steels with varying martensite volume fractions (MVF) were carried out in argon, nitrogen, carbon dioxide, and air atmospheres. As MVF decreases, so does the friction coefficient in air. Under CO₂ conditions, this trend is reversed. The friction coefficient in the Ar and N₂ gaseous environments is independent of the MVF. When compared to other gaseous environments, the wear rate in the CO₂ environment is significantly lower. The friction coefficient in Ar and N₂ atmospheres is slightly higher than in air atmosphere. When compared to other gaseous environments, there is very little wear in the CO₂ environment. Furthermore, in the CO₂ atmosphere, adhesive wear and material removal were significantly reduced in comparison to other atmospheres; on the other hand, more adhesive wear was observed in the Ar and N₂ atmospheres than in other atmospheres. Whatever the gaseous environment, the oxidative and mild adhesive wear mechanisms are dominant for low martensite volume fraction. In contrast, except for CO₂, the main wear mechanism for high martensite volume fractions is severe adhesive wear. It is also worth noting that the size of the debris decreases as the martensite volume fraction decreases.

Vorheriger Artikel Microstructure Evolution of B4C/Al Interface: A First-Principle Study

Nächster Artikel Superelastic Behavior of Additively Manufactured Nylon-12 Lattice Structures

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

K. Holmberg and A. Erdemir, Global Impact of Friction on Energy Consumption, Economy and Environment, Fme Trans., 2015, 43(3), p 181–185.

M. Calcagnotto, Y. Adachi, D. Ponge and D. Raabe, Deformation and Fracture Mechanisms in Fine-and Ultrafine-Grained Ferrite/Martensite Dual-Phase Steels and the Effect of Aging, Acta Mater., 2011, 59(2), p 658–670. https://doi.org/10.1016/j.actamat.2010.10.002CrossRef

D. Ji, M. Zhang, D. Zhu, S. Luo and L. Li, Influence of Microstructure and Pre-Straining on the Bake Hardening Response for Ferrite-Martensite Dual-Phase Steels of Different Grades, Mater. Sci. Eng. A, 2017, 708, p 129–141. https://doi.org/10.1016/j.msea.2017.09.127CrossRef

C. Trevisiol, A. Jourani and S. Bouvier, Effect of Martensite Volume Fraction and Abrasive Particles Size on Friction and Wear Behaviour of a Low Alloy Steel, Tribol. Int., 2017, 113, p 411–425. https://doi.org/10.1016/j.triboint.2016.11.001CrossRef

F. Yaghoobi, R. Jamaati and H.J. Aval, Simultaneous Enhancement of Strength and Ductility in Ferrite-Martensite Steel via Increasing the Martensite Fraction, Mater. Chem. Phys., 2021, 259, p 124204. https://doi.org/10.1016/j.matchemphys.2020.124204CrossRef

T. Akagak and D. Rigney, Sliding Friction and Wear of Metals in Vacuum, Wear, 1991, 149(1–2), p 353–374. https://doi.org/10.1016/0043-1648(91)90385-8CrossRef

K. Fukuda and J. Sugimura, Influences of gases on the tribological properties of pure Iron. In: Proceedings of the ASME/STLE 2011 International Joint Tribology Conference, Los Angeles, California, USA, October 24–26, 2011, p 241–243. https://doi.org/10.1115/IJTC2011-61205

H. Mishina, Atmospheric Characteristics in Friction and Wear of Metals, Wear, 1992, 152(1), p 99–110. https://doi.org/10.1016/0043-1648(92)90207-OCrossRef

H. Mishina, Chemisorption of Diatomic Gas Molecules and Atmospheric Characteristics in Adhesive Wear and Friction of Metals, Wear, 1995, 180(1–2), p 1–7. https://doi.org/10.1016/0043-1648(95)80003-4CrossRef

10.

A.F. Smith, The unlubricated Reciprocating Sliding Wear of 316 Stainless Steel in CO₂ at 20–600 °C, Tribol. Int., 1986, 19(2), p 65–71. https://doi.org/10.1016/0301-679X(86)90077-0CrossRef

11.

J. Sugimura, B. Ono, M. Hashimoto, H. Tanaka and H. Tanaka, Sliding Experiments of Steels in Gaseous Hydrogen, Tribol. Interface Eng. Ser., 2005, 48, p 465–473. https://doi.org/10.1016/S0167-8922(05)80048-3CrossRef

12.

I. Velkavrh, F. Ausserer, S. Klien, J. Brenner, P. Forêt and A. Diem, The Effect of Gaseous Atmospheres on Friction and Wear of Steel–Steel Contacts, Tribol. Int., 2014, 79, p 99–110. https://doi.org/10.1016/j.triboint.2014.05.027CrossRef

13.

I. Velkavrh, F. Ausserer, S. Klien, J. Voyer, A. Ristow, J. Brenner and A. Diem, The Influence of Temperature on Friction and Wear of Unlubricated Steel/Steel Contacts in Different Gaseous Atmospheres, Tribol. Int., 2016, 98, p 155–171. https://doi.org/10.1016/j.triboint.2016.02.022CrossRef

14.

A.F. Smith, Influence of Environment on the Unlubricated Wear of 316 Stainless Steel at Room Temperature, Tribol. Int., 1986, 19(1), p 3–10. https://doi.org/10.1016/0301-679X(86)90088-5CrossRef

15.

Z.B. Cai, M.H. Zhu, J.F. Zheng, X.S. Jin and Z.R. Zhou, Torsional Fretting Behaviors of LZ50 Steel in Air and Nitrogen, Tribol. Int., 2009, 42(11–12), p 1676–1683. https://doi.org/10.1016/j.triboint.2009.04.031CrossRef

16.

P. Karlsson, A. Gåård and P. Krakhmalev, Influence of Tool Steel Microstructure on Friction and Initial Material Transfer, Wear, 2014, 319(1–2), p 12–18. https://doi.org/10.1016/j.wear.2014.07.002CrossRef

17.

M.A. Moore, The Relationship Between the Abrasive Wear Resistance, Hardness and Microstructure of Ferritic Materials, Wear, 1974, 28(1), p 59–68. CrossRef

18.

C. Trevisiol, A. Jourani and S. Bouvier, Effect of Hardness, Microstructure, Normal Load and Abrasive Size on Friction and on Wear Behaviour of 35NCD16 Steel, Wear, 2017, 388–389, p 101–111. https://doi.org/10.1016/j.wear.2017.05.008CrossRef

19.

C. Trevisiol, A. Jourani and S. Bouvier, Effect of Microstructures with the Same Chemical Composition and Similar Hardness Levels on Tribological Behavior of a Low Alloy Steel, Tribol. Int., 2018, 127, p 389–403. https://doi.org/10.1016/j.triboint.2018.06.019CrossRef

20.

W. Tuckart, L. Iurman and E. Forlerer, Influence of Microstructure on Tribologically Mixed Layers, Wear, 2011, 271(5–6), p 792–801. https://doi.org/10.1016/j.wear.2011.03.012CrossRef

21.

O.A. Zambrano, J.A. Gómez, J.J. Coronado and S.A. Rodríguez, The Sliding Wear Behaviour of Steels with the Same Hardness, Wear, 2019, 418–419, p 201–207. CrossRef

22.

R. Davies, Influence of Martensite Composition and Content on the Properties of Dual Phase Steels, Metall. Trans. A, 1978, 9(5), p 671–679. CrossRef

23.

A.K. Jha, B.K. Prasad, O.P. Modi, S. Das and A.H. Yegneswaran, Correlating Microstructural Features and Mechanical Properties with Abrasion Resistance of a High Strength Low Alloy Steel, Wear, 2003, 254(1–2), p 120–128. https://doi.org/10.1016/S0043-1648(02)00309-5CrossRef

24.

R. Nadlene, H. Esah, S. Norliana and M.M. Irwan, Study on the Effect of Volume Fraction of Dual Phase Steel to Corrosion Behaviour and Hardness, World Acad. Sci. Eng. Technol., 2011, 5(2), p 564–567.

25.

A. Saai, O.S. Hopperstad, Y. Granbom and O.G. Lademo, Influence of Volume Fraction and Distribution of Martensite Phase on the Strain Localization in Dual Phase Steels, Procedia Mater. Sci., 2014, 3, p 900–905. https://doi.org/10.1016/j.mspro.2014.06.146CrossRef

26.

H. Saghafian and S. Kheirandish, Correlating Microstructural Features with Wear Resistance of Dual Phase Steel, Mater. Lett., 2007, 61(14–15), p 3059–3063. https://doi.org/10.1016/j.matlet.2006.11.001CrossRef

27.

X. Xu, S. van der Zwaag and W. Xu, The Effect of Martensite Volume Fraction on the Scratch and Abrasion Resistance of a Ferrite–Martensite Dual Phase Steel, Wear, 2016, 348–349, p 80–88. https://doi.org/10.1016/j.wear.2015.11.017CrossRef

28.

X. Xu, W. Xu, F.H. Ederveen and S. van der Zwaag, Design of Low Hardness Abrasion Resistant Steels, Wear, 2013, 301(1–2), p 89–93. https://doi.org/10.1016/j.wear.2013.01.002CrossRef

29.

V. Abouei, H. Saghafian and S. Kheirandish, Effect of Microstructure on the Oxidative Wear Behavior of Plain Carbon Steel, Wear, 2007, 262(9–10), p 1225–1231. https://doi.org/10.1016/j.wear.2006.11.009CrossRef

30.

R. Tyagi, S.K. Nath and S. Ray, Effect of Martensite Content on Friction and Oxidative Wear Behavior of 0.42 Pct Carbon Dual-Phase Steel, Metall. Mater. Trans. A, 2002, 33(11), p 3479–3488. CrossRef

31.

R. Tyagi, S.K. Nath and S. Ray, Modelling of Dry Sliding Oxidation-Modified Wear in Two Phase Materials, Wear, 2003, 255(1–6), p 327–332. https://doi.org/10.1016/S0043-1648(03)00209-6CrossRef

32.

N. Kim and G. Thomas, Effects of Morphology on the Mechanical Behavior of a Dual Phase Fe/2Si/0.1 C Steel, Metall. Trans. A, 1987, 12(3), p 483–489. CrossRef

33.

S. Mediratta, V. Ramaswamy and P.R. Rao, Influence of Ferrite-Martensite Microstructural Morphology on the Low Cycle Fatigue of a Dual-Phase Steel, Int. J. Fatigue, 1985, 7(2), p 107–115. CrossRef

34.

S. Hashmi, Comprehensive Materials Processing, Newnes, 2014, 12, p 581–604.

35.

X. Xu, S. van der Zwaag and W. Xu, The Effect of Ferrite–Martensite Morphology on the Scratch and Abrasive Wear Behaviour of a Dual Phase Construction Steel, Wear, 2016, 348, p 148–157. https://doi.org/10.1016/j.wear.2015.12.005CrossRef

36.

E. Fereiduni and S.G. Banadkouki, Reliability/Unreliability of Mixture Rule in a Low Alloy Ferrite–Martensite Dual Phase Steel, J. Alloys Compd., 2013, 577, p 351–359. https://doi.org/10.1016/j.jallcom.2013.05.209CrossRef

37.

L. Valeria, H.N. Lorusso and H.G. Svoboda, Effect of Carbon Content on Microstructure and Mechanical Properties of Dual Phase Steels, Procedia Mater. Sci., 2015, 8, p 1047–1056. https://doi.org/10.1016/j.mspro.2015.04.167CrossRef

38.

O.P. Modi, P. Pandit, D.P. Mondal, B.K. Prasad, A.H. Yegneswaran and A. Chrysanthou, High-Stress Abrasive Wear Response of 0.2% Carbon Dual Phase Steel: Effects of Microstructural Features and Experimental Conditions, Mater. Sci. Eng. A, 2007, 458(1–2), p 303–311. https://doi.org/10.1016/j.msea.2006.12.083CrossRef

39.

P. Movahed, S. Kolahgar, S.P.H. Marashi, M. Pouranvari and N. Parvin, The Effect of Intercritical Heat Treatment Temperature on the Tensile Properties and Work Hardening Behavior of Ferrite–Martensite Dual Phase Steel Sheets, Mater. Sci. Eng. A, 2009, 518(1–2), p 1–6. https://doi.org/10.1016/j.msea.2009.05.046CrossRef

40.

F.P. Bowden and G. Rowe, The Adhesion of Clean Metals, Proc. R. Soc. Lond. Ser. A, 1956, 233(1195), p 429–442. CrossRef

41.

D.H. Buckley, Surface Effects in Adhesion, Friction, Wear, and Lubrication, Vol 5 Elsevier, London, 1981.

42.

A. Merstallinger, M. Sales, E. Semerad and B.D. Dunn, Assessment of Cold Welding Between Separable Contact Surfaces due to Impact and Fretting Under Vacuum, ESA Sci. Tech. Mem., 2009, 279, p 57.

43.

F.P. Bowden and J. Young, Friction of Clean Metals and the Influence of Adsorbed Films, Proc. R. Soc. Lond. Ser. A, 1951, 208(1094), p 311–325. CrossRef

44.

D.H. Buckley, Friction, Wear, and Lubrication in Vacuum, Vol 277 NASA, Washington, 1971.

45.

A. Jourani, Effect of Roughness Geometries in Contact Mechanics, Int. J. Mater. Prod. Technol., 2015, 51(2), p 127–138. https://doi.org/10.1504/IJMPT.2015.071771CrossRef

46.

A. Jourani, M. Bigerelle, L. Petit and H. Zahouani, Local Coefficient of Friction, Sub-Surface Stresses and Temperature Distribution During Sliding Contact, Int. J. Mater. Prod. Technol., 2010, 38(1), p 44–56. https://doi.org/10.1504/IJMPT.2010.031894CrossRef

47.

J. Mølgaard, A Discussion of Oxidation, Oxide Thickness and Oxide Transfer in Wear, Wear, 1976, 40(3), p 277–291. https://doi.org/10.1016/0043-1648(76)90120-4CrossRef

48.

H. So, D.S. Yu and C.Y. Chuang, Formation and Wear Mechanism of Tribo-Oxides and the Regime of Oxidational Wear of Steel, Wear, 2002, 253(9–10), p 1004–1015. https://doi.org/10.1016/S0043-1648(02)00230-2CrossRef

49.

S.Q. Wang, M.X. Wei and Y.T. Zhao, Effects of the Tribo-Oxide and Matrix on Dry Sliding Wear Characteristics and Mechanisms of a Cast Steel, Wear, 2010, 269(5–6), p 424–434. https://doi.org/10.1016/j.wear.2010.04.028CrossRef

50.

M.X. Wei, K.M. Chen, S.Q. Wang and X.H. Cui, Analysis for Wear Behaviors of Oxidative Wear, Tribol. Lett., 2011, 42(1), p 1–7. https://doi.org/10.1007/s11249-010-9741-yCrossRef

51.

Q.Y. Zhang, K.M. Chen, L. Wang, X.H. Cui and S.Q. Wang, Characteristics of Oxidative Wear and Oxidative Mildwear, Tribol. Int., 2013, 61, p 214–223. https://doi.org/10.1016/j.triboint.2013.01.003CrossRef

52.

E.E. Nunez, K. Polychronopoulou and A.A. Polycarpou, Lubricity Effect of Carbon Dioxide used as an Environmentally Friendly Refrigerant in Air-Conditioning and Refrigeration Compressors, Wear, 2010, 270(1–2), p 46–56. https://doi.org/10.1016/j.wear.2010.09.005CrossRef

53.

X. Wu, P. Cong, H. Nanao, I. Minami and S. Mori, Tribological Behaviors of 52100 Steel in Carbon Dioxide Atmosphere, Tribol. Lett., 2004, 17(4), p 925–930. https://doi.org/10.1007/s11249-004-8101-1CrossRef

54.

S.Q. Wang, M.X. Wei, F. Wang, X.H. Cui and C. Dong, Transition of Mild Wear to Severe Wear in Oxidative Wear of H21 Steel, Tribol. Lett., 2008, 32(2), p 67–72. https://doi.org/10.1007/s11249-008-9361-yCrossRef

55.

S.Q. Wang, M.X. Wei, F. Wang and Y.T. Zhao, Transition of Elevated-Temperature Wear Mechanisms and the Oxidative Delamination Wear in Hot-Working Die Steels, Tribol. Int., 2010, 43(3), p 577–584. https://doi.org/10.1016/j.triboint.2009.09.006CrossRef

Titel: Combined Effect of Microstructure and Gaseous Environments on Oxidative and Adhesive Wear of Dual-Phase Steel
verfasst von: Y. Zhang
A. Jourani
Publikationsdatum: 10.08.2021
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 12/2021
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-021-06090-8

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 12/2021

Effects of Acetylene Flow Rate on Structure, Mechanical Properties, and Tribological Properties of Cr-CHx Coatings Deposited by Radio Frequency Magnetron Sputtering

Direct Electrochemical Reduction of Mixtures of Iron and Copper Oxides

Influence of Different Welding Processes on Microstructure, Hardness, and Wear Behavior of Martensitic Hardfaced Cladding

Effects of Short-Term Thermal Aging on the Fracture Behavior of 3D-Printed Polymers

Tribological Behaviors and Friction-Induced Vibration and Noise Performance of TC4 with Bionic Coating Prepared by Laser Additive Manufacturing

Melt Pool Turbulence Effects on the Interface between Dissimilar Materials Manufactured by Directed Energy Deposition with Laser and Powder

Premium Partner

Marktübersichten