nach oben

International Journal on Interactive Design and Manufacturing (IJIDeM)

Erschienen in:

07.01.2022 | Original Paper

Thermal simulation of wire arc additive manufacturing: a new material deposition and heat input modelling

verfasst von: Akram Chergui, François Villeneuve, Nicolas Béraud, Frédéric Vignat

Erschienen in: International Journal on Interactive Design and Manufacturing (IJIDeM) | Ausgabe 1/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Wire arc additive manufacturing allows the production of metallic parts by the deposition of weld beads using arc-welding technologies. This low-cost additive manufacturing technology has the ability to manufacture large-scale parts at a high deposition rate. However, the quality of the obtained parts is greatly affected by the various thermal phenomena present during the manufacturing process. Numerical simulation remains an effective tool for studying such phenomena. In this paper, a new finite element method is proposed in order to model material deposition and heat input in WAAM process. This method allows to gradually construct the mesh representing the deposited zones along the deposition path. The heat source model from Goldak is adapted and combined with the proposed material deposition technique considering the power distribution between the filler material and the molten pool. The effectiveness of the new method is validated through a set of experimentations, one of which is detailed in this paper.

Vorheriger Artikel Analysis of the manufacturing flexibility parameters with effective performance metrics: a new interactive approach based on modified TOPSIS-Taguchi method

Nächster Artikel A methodological study of leaf spring by material comparison and Taguchi’s DOE

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vayre, B., Vignat, F., Villeneuve, F.: Metallic additive manufacturing: state-of-the-art review and prospects. Mech. Ind. 13(2), 89–96 (2012). https://doi.org/10.1051/meca/2012003CrossRef

Lopes Nunes, M., Pereira, A.C., Alves, A.C.: Smart products development approaches for industry 4.0. Proced. Manuf. 13, 1215–1222 (2017). https://doi.org/10.1016/j.promfg.2017.09.035CrossRef

Liberini, M., et al.: Selection of optimal process parameters for wire arc additive manufacturing. Proced. CIRP 62, 470–474 (2017). https://doi.org/10.1016/j.procir.2016.06.124CrossRef

Derekar, K.S.: A review of wire arc additive manufacturing and advances in wire arc additive manufacturing of aluminium. Mater. Sci. Technol. 34(8), 895–916 (2018). https://doi.org/10.1080/02670836.2018.1455012CrossRef

Zhao, Y., Jia, Y., Chen, S., Shi, J., Li, F.: Process planning strategy for wire-arc additive manufacturing: thermal behavior considerations. Addit. Manuf. 32, 100935 (2020). https://doi.org/10.1016/j.addma.2019.100935CrossRef

Montevecchi, F., Venturini, G., Grossi, N., Scippa, A., Campatelli, G.: Heat accumulation prevention in wire-arc-additive-manufacturing using air jet impingement. Manuf. Lett. 17, 14–18 (2018). https://doi.org/10.1016/j.mfglet.2018.06.004CrossRef

Wang, Z., Zimmer-Chevret, S., Léonard, F., et al.: Prediction of bead geometry with consideration of interlayer temperature effect for CMT-based wire-arc additive manufacturing. Weld. World 65, 2255–2266 (2021). https://doi.org/10.1007/s40194-021-01192-2CrossRef

Béraud, N., Vignat, F., Villeneuve, F., Dendievel, R.: Improving dimensional accuracy in EBM using beam characterization and trajectory optimization. Addit. Manuf. 14, 1–6 (2017). https://doi.org/10.1016/j.addma.2016.12.002CrossRef

Vignat, F., Béraud, N., Villeneuve, F.: Rapid thermal simulation of powder bed additive manufacturing.In: 2018 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), pp. 1498–1502. Bangkok, (2018), doi: https://doi.org/10.1109/IEEM.2018.8607695

10.

Stavropoulos, P., Foteinopoulos, P.: Modelling of additive manufacturing processes: a review and classification. Manuf. Rev. 5, 2 (2018). https://doi.org/10.1051/mfreview/2017014CrossRef

11.

Xiong, J., Lei, Y., Li, R.: Finite element analysis and experimental validation of thermal behavior for thin-walled parts in GMAW-based additive manufacturing with various substrate preheating temperatures. Appl. Therm. Eng. 126, 43–52 (2017). https://doi.org/10.1016/j.applthermaleng.2017.07.168CrossRef

12.

Xiong, J., Li, R., Lei, Y., Chen, H.: Heat propagation of circular thin-walled parts fabricated in additive manufacturing using gas metal arc welding. J. Mater. Process. Technol. 251, 12–19 (2018). https://doi.org/10.1016/j.jmatprotec.2017.08.007CrossRef

13.

Montevecchi, F., Venturini, G., Scippa, A., Campatelli, G.: Finite element modelling of wire-arc-additive-manufacturing process. Proced. CIRP 55, 109–114 (2016). https://doi.org/10.1016/j.procir.2016.08.024CrossRef

14.

Montevecchi, F., Venturini, G., Grossi, N., Scippa, A., Campatelli, G.: Finite element mesh coarsening for effective distortion prediction in wire arc additive manufacturing. Addit. Manuf. 18, 145–155 (2017). https://doi.org/10.1016/j.addma.2017.10.010CrossRef

15.

Ding, J., et al.: Thermo-mechanical analysis of wire and arc additive layer manufacturing process on large multi-layer parts. Comput. Mater. Sci. 50(12), 3315–3322 (2011). https://doi.org/10.1016/j.commatsci.2011.06.023CrossRef

16.

Michaleris, P.: Modeling metal deposition in heat transfer analyses of additive manufacturing processes. Finite Elem. Anal. Des. 86, 51–60 (2014). https://doi.org/10.1016/j.finel.2014.04.003CrossRef

17.

Hu, J., Tsai, H.L.: Heat and mass transfer in gas metal arc welding. Part I: the arc. Int. J. Heat Mass Transf. 50(5–6), 833–846 (2007). https://doi.org/10.1016/j.ijheatmasstransfer.2006.08.025CrossRefMATH

18.

Goldak, J., Chakravarti, A., Bibby, M.: A new element model for welding heat source. Metall. Mater. Trans. B 15, 299–305 (1984). https://doi.org/10.1007/BF02667333CrossRef

19.

Chergui, A., Beraud, N., Vignat, F., Villeneuve, F.: Finite element modeling and validation of metal deposition in wire arc additive manufacturing. In: Roucoules, L., Paredes, M., Eynard, B., Morer Camo, P., Rizzi, C. (eds.) Advances on mechanics, design engineering and manufacturing III. JCM 2020. Lecture notes in mechanical engineering. Springer, Cham (2021). https://doi.org/10.1007/978-3-030-70566-4_11CrossRef

20.

DuPont, J.N., Marder, A.R.: Thermal efficiency of arc welding processes. Weld. J.-Incl. Weld. Res. Suppl. 74(12), 406s-416s (1995)

21.

El-Sayed, M.M., Shash, A.Y., Abd-Rabou, M.: Finite element modeling of aluminum alloy AA5083-O friction stir welding process. J. Mater. Process. Technol. 252, 13–24 (2018). https://doi.org/10.1016/j.jmatprotec.2017.09.008CrossRef

22.

Manokruang, S., Vignat, F., Museau, M., Limousin, M.: Process parameters effect on weld beads geometry deposited by wire and arc additive manufacturing (WAAM). In: Roucoules, L., Paredes, M., Eynard, B., Morer Camo, P., Rizzi, C. (eds.) Advances on mechanics, design engineering and manufacturing III. JCM 2020. Lecture notes in mechanical engineering. Springer, Cham (2021)

Titel: Thermal simulation of wire arc additive manufacturing: a new material deposition and heat input modelling
verfasst von: Akram Chergui
François Villeneuve
Nicolas Béraud
Frédéric Vignat
Publikationsdatum: 07.01.2022
Verlag: Springer Paris
Erschienen in: International Journal on Interactive Design and Manufacturing (IJIDeM) / Ausgabe 1/2022
Print ISSN: 1955-2513
Elektronische ISSN: 1955-2505
DOI: https://doi.org/10.1007/s12008-021-00824-7

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Weitere Artikel der Ausgabe 1/2022

Silicon carbide die sintering layer: manufacturing process optimization and modeling

Prediction of surface roughness of titanium alloy in abrasive waterjet machining process

Identification of the key manufacturing parameters impacting the prediction accuracy of support vector machine (SVM) model for quality assessment

Effect of extruder temperature and printing speed on the tensile strength of fused deposition modeling (FDM) 3D printed samples: a meta-analysis study

iWeek experience: the innovation challenges of digital transformation in industry

Design rules application in manufacturing industries: a state of the art survey and proposal of a context-aware approach

Premium Partner