nach oben

Arabian Journal for Science and Engineering

Erschienen in:

06.09.2021 | Research Article-Mechanical Engineering

Investigation of Mechanical Properties and Optimization of Forming Parameters of Al7075-B₄C-Fly Ash Hybrid Aluminium Matrix Composite

verfasst von: Mohit Kumar Sahu, Raj Kumar Sahu

Erschienen in: Arabian Journal for Science and Engineering | Ausgabe 7/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The present need for lightweight, high-strength materials in advanced applications has prompted researchers to concentrate on hybrid aluminium matrix composites (HAMCs). For automotive applications, boron carbide (B₄C) and fly ash (FA)-reinforced HAMCs are viable options. Mechanical characterization of stir-casted B₄C and FA-reinforced Al7075 HAMCs was done in this study. The compositions of the examined composites are (x = 2; y = 2), (x = 2; y = 4), (x = 2; y = 6), (x = 2; y = 8), and (x = 2; y = 10), where x is the weight per cent of FA and y is the weight per cent of B₄C, according to the prior research. The composite with (x = 2; y = 8) was determined to have the best mechanical characteristics and was considered for further cold upsetting process optimization. Cold upsetting is one of the types of forming process used in automotive applications. Aspect ratio, load, and friction factor were used as input parameters in this procedure. The formability index and barrel radius, on the other hand, are response parameters that reflect the process' performance. The Grey-Taguchi technique was chosen for optimization since it is appropriate for multi-response optimization problems of this nature. The findings were the optimal combination of parameters and the per cent contribution of significant parameters. Finally, the validation experiment was carried out using the best possible combination of parameters, and the validation results are in excellent agreement with the suggested outcomes. This study may offer a more in-depth performance evaluation of boron carbide and fly ash-reinforced HAMCs.

Vorheriger Artikel Effect of /Water and CuO/Water Nanofluids on Heat Transfer Enhancement Flows Through Twisted Clockwise–Counter-Clockwise Square Duct

Nächster Artikel Periodical Analysis of Convective Heat Transfer Along Electrical Conducting Cone Embedded in Porous Medium

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Ravishankar, B.; Nayak, S.K.; Kader, M.A.: Hybrid composites for automotive applications–A review. J. Reinf. Plast. Compos. (2019). https://doi.org/10.1177/0731684419849708CrossRef

Singh, J.; Chauhan, A.: Characterization of hybrid aluminum matrix composites for advanced applications-A review. J. Mater. Res. Technol. 5, 159–169 (2016). https://doi.org/10.1016/j.jmrt.2015.05.004CrossRef

Idrisi, A.H.; Mourad, A.H.I.: Conventional stir casting versus ultrasonic assisted stir casting process: mechanical and physical characteristics of AMCs. J. Alloys Compd. 805, 502–508 (2019). https://doi.org/10.1016/j.jallcom.2019.07.076CrossRef

Shin, J.H.; Bae, D.H.: Effect of the TiO2 nanoparticle size on the decomposition behaviors in aluminum matrix composites. Mater. Chem. Phys. 143, 1423–1430 (2014). https://doi.org/10.1016/j.matchemphys.2013.11.057CrossRef

David, R.; Dasgupta, R.; Prasad, B.K.: Effect of fine TiC particle reinforcement on the dry sliding wear behavior of in situ synthesized ZA27 alloy. J. Tribol. (2019). https://doi.org/10.1115/1.4041257CrossRef

Sugiawati, V.A.; Vacandio, F.; Galeyeva, A., et al.: Enhanced electrochemical performance of electropolymerized self-organized TiO2 nanotubes fabricated by anodization of Ti grid. Front. Phys. 7, 1–8 (2019). https://doi.org/10.3389/fphy.2019.00179CrossRef

Schöttner, L.; Nefedov, A.; Yang, C., et al.: Structural evolution of α-Fe2O3(0001) surfaces under reduction conditions monitored by infrared spectroscopy. Front. Chem. 7, 1–12 (2019). https://doi.org/10.3389/fchem.2019.00451CrossRef

Sahu, M.K.; Sahu, R.K.: Experimental investigation, modelling, and optimization of wear parameters of B 4 C and fly-ash reinforced aluminum hybrid composite. Front. Phys. 8, 1–14 (2020)CrossRef

Lakshmanan, M.; SelwinRajadurai, J.; Chakkravarthy, V.; Rajakarunakaran, S.: Wear and EBSD studies on (SiC/NiTi) reinforced Al7075 composite. Mater. Lett. 272, 127879 (2020). https://doi.org/10.1016/j.matlet.2020.127879CrossRef

10.

Manikandan, R.; Arjunan, T.V.; Akhil, A.R.: Studies on micro structural characteristics, mechanical and tribological behaviours of boron carbide and cow dung ash reinforced aluminium (Al 7075) hybrid metal matrix composite. Compos. Part B Eng. 183, 107668 (2020). https://doi.org/10.1016/j.compositesb.2019.107668CrossRef

11.

Kim, S.W.; Kim, D.Y.; Kim, W.G.; Woo, K.D.: The study on characteristics of heat treatment of the direct squeeze cast 7075 wrought Al alloy. Mater. Sci. Eng. A 304–306, 721–726 (2001). https://doi.org/10.1016/S0921-5093(00)01594-XCrossRef

12.

Bodunrin, M.O.; Alaneme, K.K.; Chown, L.H.: Aluminium matrix hybrid composites: a review of reinforcement philosophies; mechanical, corrosion and tribological characteristics. J. Mater. Res. Technol. 4, 434–445 (2015). https://doi.org/10.1016/j.jmrt.2015.05.003CrossRef

13.

Gudipudi, S.; Nagamuthu, S.; Subbian, K.S.; Chilakalapalli, S.P.R.: Enhanced mechanical properties of AA6061-B4C composites developed by a novel ultra-sonic assisted stir casting. Eng. Sci. Technol. Int. J. (2020). https://doi.org/10.1016/j.jestch.2020.01.010CrossRef

14.

Oluwatosin, M.; Keneth, K.; Heath, L.: Aluminium matrix hybrid composites: a review of reinforcement philosophies; mechanical, corrosion and tribological characteristics. Integr. Med. Res. (2015). https://doi.org/10.1016/j.jmrt.2015.05.003CrossRef

15.

Sahu, M.K; Sahu, R.K.: Aluminum based hybrid metal matrix composites: A review of selection philosophy and mechanical properties for advanced aluminum based hybrid metal matrix composites: A review of selection philosophy and mechanical properties for advanced applications. Int. J. Mech. Prod. Eng. Res. Dev. 10, 8–28 (2020)

16.

Sahu, M.K.; Sahu, R.K.: Fabrication of aluminum matrix composites by stir casting technique and stirring process parameters optimization. In: Vijayaram, T. (ed.) Advanced Casting Techniques, pp. 111–126. IntechOpen (2018). https://doi.org/10.5772/intechopen.73485

17.

Sahu, M.K.; Valarmathi, A.; Baskaran, S., et al.: Multi-objective optimization of upsetting parameters of Al-TiC metal matrix composites: a grey Taguchi approach. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 228, 1501–1507 (2014). https://doi.org/10.1177/0954405413519434CrossRef

18.

Sahu, M.K.; Sahu, R.K.: Synthesis, microstructure and hardness of Al 7075/B4C/Fly-ash composite using stir casting method. Mater. Today Proc. 27, 2401–2406 (2019). https://doi.org/10.1016/j.matpr.2019.09.150CrossRef

19.

Lei, Z.; Bi, J.; Chen, Y., et al.: Effect of TiB2 content on microstructural features and hardness of TiB2/AA7075 composites manufactured by LMD. J. Manuf. Process. 53, 283–292 (2020). https://doi.org/10.1016/j.jmapro.2020.02.036CrossRef

20.

Jiang, B.; Zhenglong, L.; Xi, C., et al.: Microstructure and mechanical properties of TiB2-reinforced 7075 aluminum matrix composites fabricated by laser melting deposition. Ceram. Int. 45, 5680–5692 (2019). https://doi.org/10.1016/j.ceramint.2018.12.033CrossRef

21.

Gao, M.; Kang, H.; Chen, Z., et al.: Enhanced strength-ductility synergy in a boron carbide reinforced aluminum matrix composite at 77 K. J. Alloys Compd. 818, 153310 (2020). https://doi.org/10.1016/j.jallcom.2019.153310CrossRef

22.

David Raja Selvam, J.; Dinaharan, I.; Rai, R.S.; Mashinini, P.M.: Dry sliding wear behaviour of in-situ fabricated TiC particulate reinforced AA6061 aluminium alloy. Tribol – Mater. Surf. Interfaces 13, 1–11 (2019). https://doi.org/10.1080/17515831.2018.1550971CrossRef

23.

Chen, F.; Chen, Z.; Mao, F., et al.: TiB2 reinforced aluminum based in situ composites fabricated by stir casting. Mater. Sci. Eng. A 625, 357–368 (2015). https://doi.org/10.1016/j.msea.2014.12.033CrossRef

24.

Azadi, M.; Zolfaghari, M.; Rezanezhad, S.; Azadi, M.: Effects of SiO2nano-particles on tribological and mechanical properties of aluminum matrix composites by different dispersion methods. Appl. Phys. A Mater. Sci. Process. (2018). https://doi.org/10.1007/s00339-018-1797-9CrossRef

25.

Reddy, T.P.; Kishore, S.J.; Theja, P.C.; Rao, P.P.: Development and wear behavior investigation on aluminum-7075/B4C/fly ash metal matrix composites. Adv. Compos. Hybrid Mater. (2020). https://doi.org/10.1007/s42114-020-00145-5CrossRef

26.

Viala, J.C.; Bouix, J.; Gonzalez, G.; Esnouf, C.: Chemical reactivity of aluminium with boron carbide. J. Mater. Sci. 32, 4559–4573 (1997). https://doi.org/10.1023/A:1018625402103CrossRef

27.

Baradeswaran, A.; Elaya Perumal, A.: Influence of B4C on the tribological and mechanical properties of Al 7075–B4C composites. Compos. Part B Eng. 54, 146–152 (2013). https://doi.org/10.1016/j.compositesb.2013.05.012CrossRef

28.

Callister, W.D.; Rethwisch, D.G.: Materials Science and Engineering: an Introduction, p. 665–715. Wiley, New York (2007)

29.

Shorowordi, K.M.; Laoui, T.; Haseeb, A.S.M.A., et al.: Microstructure and interface characteristics of B4C, SiC and Al2O3 reinforced Al matrix composites: a comparative study. J. Mater. Process. Technol. 142, 738–743 (2003). https://doi.org/10.1016/S0924-0136(03)00815-XCrossRef

30.

Emmy Prema, C.; Suresh, S.; Ramanan, G.; Sivaraj, M.: Characterization, corrosion and failure strength analysis of Al7075 influenced with B4C and Nano-Al2O3 composite using online acoustic emission. Mater. Res. Express (2020). https://doi.org/10.1088/2053-1591/ab6257CrossRef

31.

Sivaprasad, K.; Babu, S.P.K.; Natarajan, S., et al.: Study on abrasive and erosive wear behaviour of Al 6063/TiB2 in situ composites. Mater. Sci. Eng. A 498, 495–500 (2008). https://doi.org/10.1016/j.msea.2008.09.003CrossRef

32.

Samer, N.; Andrieux, J.; Gardiola, B., et al.: Microstructure and mechanical properties of an Al-TiC metal matrix composite obtained by reactive synthesis. Compos. Part A Appl. Sci. Manuf. 72, 50–57 (2015). https://doi.org/10.1016/j.compositesa.2015.02.001CrossRef

33.

Wang, X.; Zhang, N.; Zhang, Y., et al.: Multiple flocculant prepared with dealkalized red mud and fly ash: properties and characterization. J. Water Process. Eng. (2020). https://doi.org/10.1016/j.jwpe.2020.101173CrossRef

34.

Arunachalam, S.; Chelladurai, S.J.S.: Optimization of dry sliding wear parameters of AA336 aluminum alloy-boron carbide and fly ash reinforced hybrid composites by stir casting process. Materwiss Werksttech 51, 189–198 (2020). https://doi.org/10.1002/mawe.201900069CrossRef

35.

Behera, M.P.; Dougherty, T.; Singamneni, S.: Conventional and additive manufacturing with metal matrix composites: a perspective. Proced. Manuf. 30, 159–166 (2019). https://doi.org/10.1016/j.promfg.2019.02.023CrossRef

36.

Chandra B.; Kumar J.; Singh H.; Kumar J.: (2015) Production technologies of metal matrix composite-a review. In: 4th International Conference Advanced Material Manufacturing Technology 5762:9

37.

Bi, J.; Bin, C.Y.; Chen, X., et al.: Densification, microstructural features and tensile properties of selective laser melted AlMgSiScZr alloy from single track to block specimen. J. Cent. South Univ. 28, 1129–1143 (2021). https://doi.org/10.1007/s11771-021-4685-yCrossRef

38.

Selvam, J.D.R.; Smart, D.S.S.R.; Dinaharan, I.: Microstructure and some mechanical properties of fly ash particulate reinforced AA6061 aluminum alloy composites prepared by compocasting. Mater. Des. 49, 28–34 (2013). https://doi.org/10.1016/j.matdes.2013.01.053CrossRef

39.

Kok, M.: Production and mechanical properties of Al2O3 particle-reinforced 2024 aluminium alloy composites. J. Mater. Process. Technol. 161, 381–387 (2005). https://doi.org/10.1016/j.jmatprotec.2004.07.068CrossRef

40.

Sahu, M.K.; Sahu, R.K.: Optimization of stirring parameters using CFD simulations for HAMCs synthesis by stir casting process. Trans. Indian Inst. Met. 70, 2563–2570 (2017). https://doi.org/10.1007/s12666-017-1119-5CrossRef

41.

Hirscvogel, M.; Dommelen, H.V.: Some applications of cold and warm forging. J. Mater. Process. Tech. 35, 343–356 (1992). https://doi.org/10.1016/0924-0136(92)90326-NCrossRef

42.

Hartlen, D.C.; Doman, D.A.: A constitutive model fitting methodology for ductile metals using cold upsetting tests and numeric optimization techniques. J. Eng. Mater. Technol. Trans. ASME 141, 1–8 (2019). https://doi.org/10.1115/1.4040592CrossRef

43.

Joseph, R.T.M.; Kanmani, D.S.: Effect of selective heating on formability and densification of powder metallurgy preforms during upsetting. Trans. Indian Inst. Met. 72, 1289–1298 (2019). https://doi.org/10.1007/s12666-019-01625-zCrossRef

44.

Prabhakar, P.P.S.M.; Sathish, V.A.S.: Multi-objective optimization of cold upsetting parameters for aluminium metal matrix composites. Trans. Indian Inst. Met. 71, 909–914 (2018). https://doi.org/10.1007/s12666-017-1222-7CrossRef

45.

Narayanasamy, R.; Anandakrishnan, V.; Pandey, K.S.: Some aspects on plastic deformation of copper and copper-titanium carbide powder metallurgy composite preforms during cold upsetting. Int. J. Mater. Form. 1, 189–209 (2008). https://doi.org/10.1007/s12289-008-0383-7CrossRef

46.

Ananthanarayanan, R.; Ahmed, Z.; Prasad, A.; Narayan, S.: Strain hardening analysis and modelling of its parameters for sintered Al and Al-1%C preforms during cold upsetting. J. Mater. Res. Technol. 8, 1789–1797 (2019). https://doi.org/10.1016/j.jmrt.2018.12.009CrossRef

47.

Shirvanimoghaddam, K.; Khayyam, H.; Abdizadeh, H., et al.: Boron carbide reinforced aluminium matrix composite: physical, mechanical characterization and mathematical modelling. Mater. Sci. Eng. A 658, 135–149 (2016). https://doi.org/10.1016/j.msea.2016.01.114CrossRef

48.

Baradeswaran, A.; Vettivel, S.C.; Elaya Perumal, A., et al.: Experimental investigation on mechanical behaviour, modelling and optimization of wear parameters of B4C and graphite reinforced aluminium hybrid composites. Mater. Des. 63, 620–632 (2014). https://doi.org/10.1016/j.matdes.2014.06.054CrossRef

49.

Subramaniam, B.; Natarajan, B.; Kaliyaperumal, B.; Chelladurai, S.J.S.: Wear behaviour of aluminium 7075 - bBoron carbide- coconut shell fly ash reinforced hybrid metal matrix composites. Mater. Res. Express 6, 449–456 (2019). https://doi.org/10.1088/2053-1591/ab4052CrossRef

50.

Mahanta, S.; Chandrasekaran, M.; Samanta, S.; Arunachalam, R.: Multi-response ANN modelling and analysis on sliding wear behavior of Al7075/B4C/fly ash hybrid nanocomposites. Mater. Res. Express (2019). https://doi.org/10.1088/2053-1591/ab28d8CrossRef

51.

Narayanasamy, R.; Ramesh, T.; Pandey, K.S.: Workability studies on cold upsetting of Al-Al2O3 composite material. Mater. Des. 27, 566–575 (2006). https://doi.org/10.1016/j.matdes.2004.12.005CrossRef

52.

Khanawapee, U.; Butdee, S.: Materials today: proceedings a study of barreling and DEFORM 3D simulation in cold upsetting of. Mater. Today Proc. (2020). https://doi.org/10.1016/j.matpr.2020.02.252CrossRef

53.

Kanca, E.; Eyercioglu, O.: Determination of barreling of aluminum solid cylinders during cold upsetting using genetic algorithm. Matéria (Rio de Janeiro) (2019). https://doi.org/10.1590/s1517-707620190001.0621CrossRef

54.

Krishna, M.G.: Fabrication and cold upsetting behaviour Of Al-5. 4ZN alloy/coal ash/sic particles reinforced composites. Int. J. Mech. Eng. Technol. 10, 298–303 (2019)MathSciNet

55.

Surace, R.; De Filippis, L.A.C.; Ludovico, A.D.; Boghetich, G.: Application of Taguchi method for the multi-objective optimization of aluminium foam manufacturing parameters. Int. J. Mater. Form. 3, 1–5 (2010). https://doi.org/10.1007/s12289-009-0409-9CrossRef

56.

Haddad, M.J.; Tajik, M.; Tehrani, A.F., et al.: An experimental investigation of cylindrical wire electrical discharge turning process using Taguchi approach. Int. J. Mater. Form. 2, 167–179 (2009). https://doi.org/10.1007/s12289-009-0401-4CrossRef

57.

Canute, X.; Majumder, M.C.: Mechanical and tribological behaviour of stir cast aluminium/boron carbide/fly ash composites. J. Eng. Sci. Technol. 13, 755–777 (2018)

58.

Baradeswaran, A.; Perumal, A.E.: Study on mechanical and wear properties of Al 7075/Al2O3/graphite hybrid composites. Compos. Part B Eng. 56, 464–471 (2014). https://doi.org/10.1016/j.compositesb.2013.08.013CrossRef

59.

Manisekar, K.; Narayanasamy, R.: Effect of friction on barrelling in square and rectangular billets of aluminium during cold upset forging. Mater. Des. 28, 592–598 (2007). https://doi.org/10.1016/j.matdes.2005.07.017CrossRef

60.

Malayappan, S.; Narayanasamy, R.: Observations of barrelling in aluminium solid cylinders during cold upsetting using different lubricants. Mater. Sci. Technol. 19, 1705–1708 (2003). https://doi.org/10.1179/026708303225009454CrossRef

61.

Vujovic, V.; Shabaik, A.H.: A new workability criterion for ductile metals. J. Eng. Mater. Technol. Trans. ASME (1986). https://doi.org/10.1115/1.3225876CrossRef

62.

Narayanasamy, R.; Pandey, K.S.: Phenomenon of barrelling in aluminium solid cylinders during cold upset-forming. J. Mater. Process. Technol. 70, 17–21 (1997). https://doi.org/10.1016/S0924-0136(97)00035-6CrossRef

63.

Kiran, T.S.; Kumar, M.P.; Basavarajappa, S.; Viswanatha, B.M.: Dry sliding wear behavior of heat treated hybrid metal matrix composite using Taguchi techniques. Mater. Des. (2014). https://doi.org/10.1016/j.matdes.2014.06.007CrossRef

64.

Haq, A.N.; Marimuthu, P.; Jeyapaul, R.: Multi response optimization of machining parameters of drilling Al/SiC metal matrix composite using grey relational analysis in the Taguchi method. Int. J. Adv. Manuf. Technol. 37, 250–255 (2008). https://doi.org/10.1007/s00170-007-0981-4CrossRef

65.

Fernlund, G.; Wells, J.; Fahrang, L., et al.: Causes and remedies for porosity in composite manufacturing. IOP Conf. Ser. Mater. Sci. Eng. (2016). https://doi.org/10.1088/1757-899X/139/1/012002CrossRef

66.

Su, H.; Gao, W.; Zhang, H., et al.: Optimization of stirring parameters through numerical simulation for the preparation of aluminum matrix composite by stir casting process. J. Manuf. Sci. Eng. Trans. ASME 132, 0610071–0610077 (2010). https://doi.org/10.1115/1.4002851CrossRef

67.

Rohatgi, P.K.; Kim, J.K.; Guo, R.Q., et al.: Age-hardening characteristics of aluminum alloy-hollow fly ash composites. Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 33, 1541–1547 (2002). https://doi.org/10.1007/s11661-002-0076-7CrossRef

68.

Nguyen, Q.B.; Gupta, M.: Microstructure and mechanical characteristics of AZ31B/Al2O 3 nanocomposite with addition of ca. J. Compos. Mater. 43, 5–17 (2009). https://doi.org/10.1177/0021998308096333CrossRef

69.

Zhang, Z.; Tremblay, R.; Dubé, D.: Microstructure and mechanical properties of ZA104 (0.3-0.6Ca) die-casting magnesium alloys. Mater. Sci. Eng. A 385, 286–291 (2004). https://doi.org/10.1016/j.msea.2004.06.063CrossRef

70.

Száraz, Z.; Trojanová, Z.; Cabbibo, M.; Evangelista, E.: Strengthening in a WE54 magnesium alloy containing SiC particles. Mater. Sci. Eng. A 462, 225–229 (2007). https://doi.org/10.1016/j.msea.2006.01.182CrossRef

71.

Nguyen, Q.B.; Gupta, M.: Enhancing compressive response of AZ31B using nano-Al2O3 and copper additions. J. Alloys. Compd. 490, 382–387 (2010). https://doi.org/10.1016/j.jallcom.2009.09.188CrossRef

72.

Muraliraja, R.; Arunachalam, R.; Al-Fori, I., et al.: Development of alumina reinforced aluminum metal matrix composite with enhanced compressive strength through squeeze casting process. Proc. Inst. Mech. Eng. Part L J. Mater. Des. Appl. (2018). https://doi.org/10.1177/1464420718809516CrossRef

73.

Dey, A.; Pandey, K.M.: Magnesium metal matrix composites - a review. Rev. Adv. Mater. Sci. 42, 58–67 (2015)

74.

Prasad, S.V.; Asthana, R.: Aluminum metal-matrix composites for automotive applications: tribological considerations. Tribol. Lett. 17, 445–453 (2004). https://doi.org/10.1023/B:TRIL.0000044492.91991.f3CrossRef

75.

Puh F.; Jurkovic Z.; Perinic M., et al.: (2016) Optimizacija parametara obrade tokarenja s više kriterija kvalitete uporabom Grey relacijske analize. Teh Vjesn 23:377–382. https://doi.org/10.17559/TV-20150526131717

76.

Selvarajan, L.; Sathiya Narayanan, C.; Jeyapaul, R.; Manohar, M.: Optimization of EDM process parameters in machining Si3N4-TiN conductive ceramic composites to improve form and orientation tolerances. Meas. J. Int. Meas. Confed. 92, 114–129 (2016). https://doi.org/10.1016/J.MEASUREMENT.2016.05.018CrossRef

Titel: Investigation of Mechanical Properties and Optimization of Forming Parameters of Al7075-B4C-Fly Ash Hybrid Aluminium Matrix Composite
verfasst von: Mohit Kumar Sahu
Raj Kumar Sahu
Publikationsdatum: 06.09.2021
Verlag: Springer Berlin Heidelberg
Erschienen in: Arabian Journal for Science and Engineering / Ausgabe 7/2022
Print ISSN: 2193-567X
Elektronische ISSN: 2191-4281
DOI: https://doi.org/10.1007/s13369-021-06117-1

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 7/2022

An Interval Discretization Method for Workspace Determination of Parallel Mechanisms

Development of an Empirical Model for Variable Power Consumption Machining Processes: A Case of End Facing

Modeling and Multiparametric Effect on Void Content in Composite Tape Winding

Development and Characterization of Epoxy-Based Polymeric Composite with Bio-particulates as Filler Material

Finite Element Analysis of the Thermo-mechanical Behaviour of Defect-Free Cylindrical Roller Bearing in Operation

Design and Development of IEG Control and Characterization of Micro-holes Generated Using In-house Developed µ-ECM Setup

Premium Partner

Marktübersichten