nach oben

Global Journal of Flexible Systems Management

Erschienen in:

23.08.2022 | Original Research

Factors Influencing the Implementation of Industry 4.0 for Sustainability in Manufacturing

verfasst von: Veepan Kumar, Prem Vrat, Ravi Shankar

Erschienen in: Global Journal of Flexible Systems Management | Ausgabe 4/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Digital transformation leveraging Industry 4.0 is referred to as a strategic solution to handle the challenges given by growing competition and unpredictable customer demands in today’s highly competitive business environment. However, transitioning to Industry 4.0 for sustainable manufacturing would require a thorough understanding of key implementation factors. The objective of this paper is to examine and validate the interrelationships among the factors influencing the implementation of Industry 4.0 for achieving sustainability in manufacturing. To accomplish this objective, the paper used an integrated methodological approach (i.e., TISM and PLS-SEM) to model the factors influencing Industry 4.0 implementation. The total interpretive structural equation modeling (TISM) technique was used to develop the hierarchical structural model in order to investigate the interrelationships among the Industry 4.0 implementation factors. The partial least squares structural equation modeling (PLS-SEM) approach was used to validate the interrelationships identified through TISM. Initially, implementation factors of Industry 4.0 for sustainable manufacturing have been identified. Following the identification of the factors, the opinion of experts was sought through a questionnaire-based survey to finalize them. The hypotheses were analyzed to test the significance of interrelationships among different constructs of Industry 4.0 factors. The findings indicate that factors like environmental regulations for sustainability, adequate labor laws for workforce working in the digital environment, continuous support and commitment from top management, effective restructuring of the organization, adequate support from different stakeholders, and strategic roadmap for digital transformation and branding of green image have the maximum influence on Industry 4.0 implementation for sustainability. Furthermore, the obtained results were in accordance when validated using PLS-SEM. This research will assist practitioners in gaining a thorough understanding of the significance of various implementation factors and their interrelationships.

Vorheriger Artikel Competencies for Managing Activities in Agile Projects

Nächster Artikel Do Companies Adopt Big Data as Determinants of Sustainability: Evidence from Manufacturing Companies in Jordan

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Acioli, C., Scavarda, A., & Reis, A. (2021). Applying Industry 4.0 technologies in the COVID–19 sustainable chains. International Journal of Productivity and Performance Management, 70(5), 988–1016.CrossRef

Adebanjo, D., Laosirihongthong, T., Samaranayake, P., & Teh, P. L. (2021). Key enablers of industry 4.0 development at firm level: Findings from an emerging economy. IEEE Transactions on Engineering Management. https://doi.org/10.1109/TEM.2020.3046764CrossRef

Agarwal, V., Mathiyazhagan, K., Malhotra, S., & Saikouk, T. (2021). Analysis of challenges in sustainable human resource management due to disruptions by Industry 4.0: An emerging economy perspective. International Journal of Manpower. https://doi.org/10.1108/IJM-03-2021-0192CrossRef

Agrawal, S., & Singh, R. K. (2019). Analyzing disposition decisions for sustainable reverse logistics: Triple bottom line approach. Resources, Conservation and Recycling. https://doi.org/10.1016/j.resconrec.2019.104448CrossRef

AIMA-KPMG report. (2018). Industry 4.0: India inc. gearing up for change. In Report by All India Management Association (AIMA) and KPMG. Retrieved January 5, 2022 from http://resources.aima.in/presentations/AIMA-KPMG-industry-4-0-report.pdf

Al-Gahtani, K., Alsulaihi, I., El-Hawary, M., & Marzouk, M. (2016). Investigating sustainability parameters of administrative buildings in Saudi Arabia. Technological Forecasting and Social Change, 105, 41–48.CrossRef

Antonakis, J., Bendahan, S., Jacquart, P., & Lalive, R. (2010). On making causal claims: A review and recommendations. The Leadership Quarterly, 21(6), 1086–1120.CrossRef

Armstrong, J. S., & Overton, T. S. (1977). Estimating nonresponse bias in mail surveys. Journal of Marketing Research, 14(3), 396–402.CrossRef

Babiceanu, R. F., & Seker, R. (2017). Cybersecurity and resilience modelling for software-defined networks-based manufacturing applications. International workshop on service orientation in holonic and multi-agent manufacturing (pp. 167–176). Springer.CrossRef

Bag, S., Telukdarie, A., Pretorius, J. H. C., & Gupta, S. (2021). Industry 4.0 and supply chain sustainability: Framework and future research directions. Benchmarking: an International Journal, 28(5), 1410–1450. https://doi.org/10.1108/BIJ-03-2018-0056CrossRef

Bai, C., Dallasega, P., Orzes, G., & Sarkis, J. (2020). Industry 4.0 technologies assessment: A sustainability perspective. International Journal of Production Economics. https://doi.org/10.1016/j.ijpe.2020.107776CrossRef

Bai, C., Orzes, G., & Sarkis, J. (2022). Exploring the impact of Industry 4.0 technologies on social sustainability through a circular economy approach. Industrial Marketing Management, 101, 176–190.CrossRef

Belaud, J. P., Prioux, N., Vialle, C., & Sablayrolles, C. (2019). Big data for agri-food 4.0: Application to sustainability management for by-products supply chain. Computers in Industry, 111, 41–50.CrossRef

Büchi, G., Cugno, M., & Castagnoli, R. (2020). Smart factory performance and Industry 40. Technological Forecasting and Social Change. https://doi.org/10.1016/j.techfore.2019.119790CrossRef

Butt, J. (2020). A strategic roadmap for the manufacturing industry to implement industry 4.0. Designs, 4(2), 11.CrossRef

Chauhan, C., Sharma, A., & Singh, A. (2019). A SAP-LAP linkages framework for integrating Industry 4.0 and circular economy. Benchmarking an International Journal, 28(5), 1638–1664.CrossRef

Chen, P. T., & Kuo, S. C. (2017). Innovation resistance and strategic implications of enterprise social media websites in Taiwan through knowledge sharing perspective. Technological Forecasting and Social Change, 118, 55–69.CrossRef

Chiarini, A. (2020). Industry 4.0, quality management and TQM world. A systematic literature review and a proposed agenda for further research. The TQM Journal, 32(4), 603–616.CrossRef

Chin, W. W. (1998). The partial least squares approach to structural equation modeling. Modern Methods for Business Research, 295(2), 295–336.

Ching, N. T., Ghobakhloo, M., Iranmanesh, M., Maroufkhani, P., & Asadi, S. (2021). Industry 4.0 applications for sustainable manufacturing: A systematic literature review and a roadmap to sustainable development. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2021.130133CrossRef

Contador, J. C., Satyro, W. C., Contador, J. L., & Spinola, M. D. M. (2020). Flexibility in the Brazilian industry 4.0: Challenges and opportunities. Global Journal of Flexible Systems Management, 21(Suppl 1), S15–S31.

Dalenogare, L. S., Benitez, G. B., Ayala, N. F., & Frank, A. G. (2018). The expected contribution of Industry 4.0 technologies for industrial performance. International Journal of Production Economics, 204, 383–394. https://doi.org/10.1016/j.ijpe.2018.08.019CrossRef

de Sousa Jabbour, A. B. L., Jabbour, C. J. C., Foropon, C., & Godinho Filho, M. (2018). When titans meet–Can industry 4.0 revolutionise the environmentally-sustainable manufacturing wave? The role of critical success factors. Technological Forecasting and Social Change, 132, 18–25.CrossRef

de Sousa Jabbour, A. B. L., Jabbour, C. J. C., Godinho Filho, M., & Roubaud, D. (2018a). Industry 4.0 and the circular economy: a proposed research agenda and original roadmap for sustainable operations. Annals of Operations Research, 270(1), 273–286.

Deng, Z., Kim, D., & Yuan, X. (2016). Assessing endogeneity issues in international marketing research. International Marketing Review, 33(3), 483–512.CrossRef

Devaraj, S., Vaidyanathan, G., & Mishra, A. N. (2012). Effect of purchase volume flexibility and purchase mix flexibility on e-procurement performance: An analysis of two perspectives. Journal of Operations Management, 30(7–8), 509–520.CrossRef

Devi, K. S., Paranitharan, K. P., & Agniveesh, A. I. (2021). Interpretive framework by analysing the enablers for implementation of Industry 4.0: An ISM approach. Total Quality Management & Business Excellence, 32(13–14), 1494–1514.CrossRef

Dillman, D. A. (1978). Mail and telephone surveys: The total design method. Wiley.

Duarte, S., & Cruz-Machado, V. (2017). xploring linkages between lean and green supply chain and the industry 40. International conference on management science and engineering management (pp. 1242–1252). Springer.

Dubey, R., & Ali, S. S. (2014). Identification of flexible manufacturing system dimensions and their interrelationship using total interpretive structural modelling and fuzzy MICMAC analysis. Global Journal of Flexible Systems Management, 15(2), 131–143.CrossRef

Dwivedi, A., Agrawal, D., Jha, A., Gastaldi, M., Paul, S. K., & D’Adamo, I. (2021). Addressing the challenges to sustainable initiatives in value chain flexibility: Implications for Sustainable Development Goals. Global Journal of Flexible Systems Management, 22(Suppl 2), S179–S197.CrossRef

Ejsmont, K., Gladysz, B., & Kluczek, A. (2020). Impact of industry 4.0 on sustainability—bibliometric literature review. Sustainability, 12(14), 5650.CrossRef

Erol, S., Schumacher, A., & Sihn, W. (2016). Strategic guidance towards Industry 40–a three-stage process model. In International conference on competitive manufacturing (Vol. 9, No. 1, pp. 495–501).

Falk, R. F., & Miller, N. B. (1992). A primer for soft modeling. University of Akron Press.

Fatorachian, H., & Kazemi, H. (2018). A critical investigation of Industry 4.0 in manufacturing: Theoretical operationalisation framework. Production Planning & Control, 29(8), 633–644.CrossRef

Foidl, H., & Felderer, M. (2015). Research challenges of industry 4.0 for quality management. International conference on enterprise resource planning systems (pp. 121–137). Springer.

Fornell, C., Larcker, D. F. (1981). Structural equation models with unobservable variables and measurement error: Algebra and statistics.

Gardas, B. B., Raut, R. D., & Narkhede, B. (2019). Determinants of sustainable supply chain management: A case study from the oil and gas supply chain. Sustainable Production and Consumption, 17, 241–253.CrossRef

Gbededo, M. A., Liyanage, K., & Garza-Reyes, J. A. (2018). Towards a life cycle sustainability analysis: A systematic review of approaches to sustainable manufacturing. Journal of Cleaner Production, 184, 1002–1015.CrossRef

Ghobakhloo, M. (2018). The future of manufacturing industry: A strategic roadmap toward Industry 4.0. Journal of Manufacturing Technology Management, 29(6), 910–936.CrossRef

Ghobakhloo, M. (2020). Industry 4.0, digitization, and opportunities for sustainability. Journal of Cleaner Production, 252, 119869. https://doi.org/10.1016/j.jclepro.2019.119869CrossRef

Ghosh, P., Jha, A., & Sharma, R. R. K. (2020). Managing carbon footprint for a sustainable supply chain: A systematic literature review. Modern Supply Chain Research and Applications, 2(3), 123–141.CrossRef

Gupta, H., Kumar, A., & Wasan, P. (2021). Industry 4.0, cleaner production and circular economy: An integrative framework for evaluating ethical and sustainable business performance of manufacturing organizations. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2021.126253CrossRef

Hair, J. F., Jr., Hult, G. T. M., Ringle, C., & Sarstedt, M. (2017). A primer on partial least squares structural equation modeling (PLS-SEM) (2nd ed.). Sage.

Hair, J. F., Ringle, C. M., & Sarstedt, M. (2011). PLS-SEM: Indeed a silver bullet. Journal of Marketing Theory and Practice, 19(2), 139–152.CrossRef

Hair, J. F., Risher, J. J., Sarstedt, M., & Ringle, C. M. (2019). When to use and how to report the results of PLS-SEM. European Business Review, 31(1), 2–24.CrossRef

Hair, J. F., Jr., Sarstedt, M., Hopkins, L., & Kuppelwieser, V. G. (2014). Partial least squares structural equation modeling (PLS-SEM): An emerging tool in business research. European Business Review, 26(2), 106–121.CrossRef

Harikannan, N., Vinodh, S., & Gurumurthy, A. (2020). Sustainable industry 4.0–an exploratory study for uncovering the drivers for integration. Journal of Modelling in Management, 16(1), 357–376.CrossRef

Harman, H. H. (1967). Modem factor analysis. University of Chicago.

Helo, P., & Hao, Y. (2017). Cloud manufacturing system for sheet metal processing. Production Planning & Control, 28(6–8), 524–537.CrossRef

Henseler, J., Ringle, C. M., & Sinkovics, R. R. (2009). The use of partial least squares path modeling in international marketing. New challenges to international marketing (Vol. 20, pp. 277–319). Emerald Group Publishing Limited.CrossRef

Herrmann, C., Schmidt, C., Kurle, D., Blume, S., & Thiede, S. (2014). Sustainability in manufacturing and factories of the future. International Journal of Precision Engineering and Manufacturing-Green Technology, 1(4), 283–292.CrossRef

Hizam-Hanafiah, M., Soomro, M. A., & Abdullah, N. L. (2020). Industry 40 readiness models: A systematic literature review of model dimensions. Information, 11(7), 364.CrossRef

Hofmann, E., & Rüsch, M. (2017). Industry 4.0 and the current status as well as future prospects on logistics. Computers in Industry, 89, 23–34.CrossRef

Horváth, D., & Szabó, R. Z. (2019). Driving forces and barriers of Industry 4.0: Do multinational and small and medium-sized companies have equal opportunities? Technological Forecasting and Social Change, 146, 119–132.CrossRef

Ivascu, L. (2020). Measuring the implications of sustainable manufacturing in the context of industry 4.0. Processes, 8(5), 585.CrossRef

Jain, V., & Ajmera, P. (2021). Modelling the enablers of industry 4.0 in the Indian manufacturing industry. International Journal of Productivity and Performance Management, 70(6), 1233–1262.CrossRef

Jasti, N. V. K., & Kota, S. (2021). Development of lean enterprise implementation methodology: An ISM approach. The TQM Journal, 33(2), 315–337.CrossRef

Junior, J. A. G., Busso, C. M., Gobbo, S. C. O., & Carreão, H. (2018). Making the links among environmental protection, process safety, and industry 4.0. Process Safety and Environmental Protection, 117, 372–382.CrossRef

Kagermann, H., Wahlster, W., & Helbig, J. (2013). Recommendations for implementing the strategic initiative industrie 4.0–final report of the industry 4.0 working group communication promoters group of the industry-science research alliance, acatech: Frankfurt am Main.

Kamble, S. S., Gunasekaran, A., & Gawankar, S. A. (2018). Sustainable industry 4.0 framework: A systematic literature review identifying the current trends and future perspectives. Process Safety and Environmental Protection, 117, 408–425.CrossRef

Kamble, S. S., Gunasekaran, A., Ghadge, A., & Raut, R. (2020). A performance measurement system for industry 4.0 enabled smart manufacturing system in SMMEs-A review and empirical investigation. International Journal of Production Economics, 229, 107853. https://doi.org/10.1016/j.ijpe.2020.107853CrossRef

Kannan, D., Diabat, A., & Shankar, K. M. (2014). Analyzing the drivers of end-of-life tire management using interpretive structural modeling (ISM). The International Journal of Advanced Manufacturing Technology, 72(9–12), 1603–1614.CrossRef

Khaba, S., & Bhar, C. (2018). Analysing the barriers of lean in Indian coal mining industry using integrated ISM-MICMAC and SEM. Benchmarking: an International Journal, 25(7), 2145–2168.CrossRef

Kiel, D., Müller, J. M., Arnold, C., & Voigt, K. I. (2017). Sustainable industrial value creation: Benefits and challenges of industry 4.0. International Journal of Innovation Management, 21(08), 1740015.CrossRef

Kiraz, A., Canpolat, O., Özkurt, C., & Taşkın, H. (2020). Analysis of the factors affecting the Industry 4.0 tendency with the structural equation model and an application. Computers & Industrial Engineering. https://doi.org/10.1016/j.cie.2020.106911CrossRef

Krishnan, S., Gupta, S., Kaliyan, M., Kumar, V., & Garza-Reyes, J. A. (2021). Assessing the key enablers for Industry 4.0 adoption using MICMAC analysis: A case study. International Journal of Productivity and Performance Management, 70(5), 1049–1071.CrossRef

Kumar, V., Shankar, R., & Vrat, P. (2022). An analysis of Industry 4.0 implementation-variables by using SAP-LAP and e-IRP approach. Benchmarking: an International Journal. 29(5), 1606–1639. https://doi.org/10.1108/BIJ-03-2021-0153CrossRef

Kumar, V., Vrat, P., & Shankar, R. (2021). Prioritization of strategies to overcome the barriers in Industry 4.0: A hybrid MCDM approach. Opsearch, 58, 711–750.CrossRef

Kumar, V., Vrat, P., & Shankar, R. (2021a). A graph-theoretic approach to evaluate the intensity of barriers in the implementation of Industry 4.0. International Journal of Innovation and Technology Management (IJITM), 18(08), 1–41.

Lee, M. X., Lee, Y. C., & Chouu, C. J. (2017). Essential implications of the digital transformation in industry 4.0. Journal of Scientific & Industrial Research, 76, 465–467.

Lezzi, M., Lazoi, M., & Corallo, A. (2018). Cybersecurity for Industry 4.0 in the current literature: A reference framework. Computers in Industry, 103, 97–110.CrossRef

Li, Y., Dai, J., & Cui, L. (2020). The impact of digital technologies on economic and environmental performance in the context of industry 4.0: A moderated mediation model. International Journal of Production Economics, 229, 107777. https://doi.org/10.1016/j.ijpe.2020.107777CrossRef

Lin, D., Lee, C. K., Lau, H., & Yang, Y. (2018). Strategic response to Industry 4.0: An empirical investigation on the Chinese automotive industry. Industrial Management & Data Systems, 118(3), 589–605.CrossRef

Lupi, F., Mabkhot, M. M., Finžgar, M., Minetola, P., Stadnicka, D., Maffei, A., ... & Lanzetta, M. (2022). Toward a sustainable educational engineer archetype through Industry 4.0. Computers in Industry. https://doi.org/10.1016/j.compind.2021.103543.

Luthra, S., Kumar, A., Zavadskas, E. K., Mangla, S. K., & Garza-Reyes, J. A. (2020). Industry 4.0 as an enabler of sustainability diffusion in supply chain: an analysis of influential strength of drivers in an emerging economy. International Journal of Production Research, 58(5), 1505–1521.CrossRef

Luthra, S., & Mangla, S. K. (2018). Evaluating challenges to Industry 4.0 initiatives for supply chain sustainability in emerging economies. Process Safety and Environmental Protection, 117, 168–179.CrossRef

Maarouf, A. M. (2018). The buyer–supplier relationship in industry 4.0. In 11th IBA Bachelor Thesis Conference, Netherlands, University of Twente, The Faculty of Behavioural, Management and Social Sciences.

Mabkhot, M. M., Ferreira, P., Maffei, A., Podržaj, P., Mądziel, M., Antonelli, D., ... & Lohse, N. (2021). Mapping industry 4.0 enabling technologies into united nations sustainability development goals. Sustainability, 13(5), 2560.

Machado, C. G., Winroth, M. P., & Ribeiro da Silva, E. H. D. (2020). Sustainable manufacturing in Industry 4.0: An emerging research agenda. International Journal of Production Research, 58(5), 1462–1484.CrossRef

Marzouk, M., & Elkadi, M. (2016). Estimating water treatment plants costs using factor analysis and artificial neural networks. Journal of Cleaner Production, 112, 4540–4549.CrossRef

Mbakop, A. M., Voufo, J., Biyeme, F., & Meva’a, J. R. L. (2022). Moving to a flexible shop floor by analyzing the information flow coming from levels of decision on the shop floor of developing countries using artificial neural network: Cameroon, case study. Global Journal of Flexible Systems Management, 23(2), 255–270.CrossRef

Moktadir, M. A., Ali, S. M., Kusi-Sarpong, S., & Shaikh, M. A. A. (2018). Assessing challenges for implementing Industry 4.0: Implications for process safety and environmental protection. Process Safety and Environmental Protection, 117, 730–741.CrossRef

Müller, J. M., Kiel, D., & Voigt, K. I. (2018). What drives the implementation of Industry 4.0? The role of opportunities and challenges in the context of sustainability. Sustainability, 10(1), 247.CrossRef

Murugaiyan, P., & Ramasamy, P. (2021). Analyzing interrelated enablers of industry 4.0 for implementation in present industrial scenario. Management Research Review, 44(9), 1241–1262.CrossRef

Narkhede, B. E., Raut, R. D., Roy, M., Yadav, V. S., & Gardas, B. (2020). Implementation barriers to lean-agile manufacturing systems for original equipment manufacturers: An integrated decision-making approach. The International Journal of Advanced Manufacturing Technology, 108(9), 3193–3206.CrossRef

Osterrieder, P., Budde, L., & Friedli, T. (2020). The smart factory as a key construct of industry 4.0: A systematic literature review. International Journal of Production Economics, 221, 107476. https://doi.org/10.1016/j.ijpe.2019.08.011CrossRef

Podsakoff, P. M., & Organ, D. W. (1986). Self-reports in organizational research: Problems and prospects. Journal of Management, 12(4), 531–544.CrossRef

Ramirez-Peña, M., Sotano, A. J. S., Pérez-Fernandez, V., Abad, F. J., & Batista, M. (2020). Achieving a sustainable shipbuilding supply chain under I4. 0 perspective. Journal of Cleaner Production, 244, 118789. https://doi.org/10.1016/j.jclepro.2019.118789CrossRef

Reeb, D., Sakakibara, M., & Mahmood, I. P. (2012). From the editors: Endogeneity in international business research. Journal of International Business Studies, 43(3), 211–218.CrossRef

Ringle C. M, Wende S, Becker J.M (2015). “SmartPLS 3.” Boenningstedt: SmartPLS GmbH, http://www.smartpls.com

Ringle, C. M., Sarstedt, M., & Straub, D. W. (2012). A critical look at the use of PLS-SEM in MIS quarterly. Misquarterly, 36(1), iii–xiv.

Rojko, A. (2017). Industry 4.0 concept: Background and overview. International Journal of Interactive Mobile Technologies, 11(5).

Sarkar, B. D., & Shankar, R. (2021). Understanding the barriers of port logistics for effective operation in the Industry 4.0 era: Data-driven decision making. International Journal of Information Management Data Insights. https://doi.org/10.1016/j.jjimei.2021.100031CrossRef

Sassanelli, C., & Terzi, S. (2022). The D-BEST reference model: A flexible and sustainable support for the digital transformation of small and medium enterprises. Global Journal of Flexible Systems Management, 23(3), 345–370.CrossRef

Schröder, C. (2016). The challenges of industry 4.0 for small and medium-sized enterprises. FriedrichEbert-Stiftung. Retrieved January 12, 2022, from http://library.fes.de/pdf-files/wiso/12683.pdf

Shamim, S., Cang, S., Yu, H., & Li, Y. (2016). Management approaches for Industry 4.0: A human resource management perspective. In 2016 IEEE congress on evolutionary computation (CEC) (pp. 5309–5316). IEEE.

Sharma, R., Jabbour, C. J. C., & de Sousa Jabbour, A. B. L. (2020). Sustainable manufacturing and industry 4.0: What we know and what we don’t. Journal of Enterprise Information Management, 34(1), 230–266.CrossRef

Shayganmehr, M., Kumar, A., Garza-Reyes, J. A., & Moktadir, M. A. (2021). Industry 4.0 enablers for a cleaner production and circular economy within the context of business ethics: A study in a developing country. Journal of Cleaner Production, 281, 125280.CrossRef

Shibin, K. T., Dubey, R., Gunasekaran, A., Luo, Z., Papadopoulos, T., & Roubaud, D. (2018). Frugal innovation for supply chain sustainability in SMEs: Multi-method research design. Production Planning & Control, 29(11), 908–927.CrossRef

Sikdar, S. K., Sengupta, D., & Mukherjee, R. (2017). Measuring progress towards sustainability. Springer International Publishing, 10, 978–983.

Singh, A. (2017). Developing a conceptual framework of waste management in the organizational context. Management of Environmental Quality: An International Journal, 28(6), 786–806.CrossRef

Sony, M., & Naik, S. (2020a). Key ingredients for evaluating Industry 4.0 readiness for organizations: a literature review. Benchmarking: an International Journal, 27(7), 2213–2232.CrossRef

Sony, M., & Naik, S. (2020b). Critical factors for the successful implementation of Industry 4.0: A review and future research direction. Production Planning & Control, 31(10), 799–815.CrossRef

Stanisławski, R., & Szymonik, A. (2021). Impact of selected intelligent Systems in Logistics on the creation of a sustainable market position of manufacturing companies in Poland in the context of industry 4.0. Sustainability, 13(7), 3996.CrossRef

Stock, T., Obenaus, M., Kunz, S., & Kohl, H. (2018). Industry 4.0 as enabler for a sustainable development: A qualitative assessment of its ecological and social potential. Process Safety and Environmental Protection, 118, 254–267.CrossRef

Stock, T., & Seliger, G. (2016). Opportunities of sustainable manufacturing in industry 4.0. Procedia CIRP, 40, 536–541.CrossRef

Sung, T. K. (2018). Industry 4.0: A Korea perspective. Technological Forecasting and Social Change, 132, 40–45.CrossRef

Sushil. (2012). Interpreting the interpretive structural model. Global Journal of Flexible Systems Management, 13(2), 87–106.

Sushil. (2018). How to check correctness of total interpretive structural models?. Annals of Operations Research, 270(1–2), 473–487

Sushil, & Dinesh, K. K. (2022). Structured literature review with TISM leading to an argumentation based conceptual model. Global Journal of Flexible Systems Management, 23(3), 387–407.CrossRef

Swarnakar, V., Singh, A. R., Antony, J., Tiwari, A. K., Cudney, E., & Furterer, S. (2020). A multiple integrated approach for modelling critical success factors in sustainable LSS implementation. Computers & Industrial Engineering. https://doi.org/10.1016/j.cie.2020.106865CrossRef

Teknikföretagen (2017). Made in Sweden 2030 – strategic agenda for innovation in production. http://www.teknikforetagen.se/globalassets/i-debatten/publikationer/produktion/made-in-sweden-2030-engelsk.pdf

Toktaş-Palut, P. (2022). Analyzing the effects of Industry 4.0 technologies and coordination on the sustainability of supply chains. Sustainable Production and Consumption, 30, 341–358.CrossRef

Tseng, M. L., Zhu, Q., Sarkis, J., & Chiu, A. S. (2018). Responsible consumption and production (RCP) in corporate decision-making models using soft computation. Industrial Management & Data Systems, 118(2), 322–329.CrossRef

Ullah, I., & Narain, R. (2021). Analyzing the barriers to implementation of mass customization in Indian SMEs using integrated ISM-MICMAC and SEM. Journal of Advances in Management Research, 18(2), 323–349.CrossRef

Umar, M., Khan, S. A. R., Yusliza, M. Y., Ali, S., & Yu, Z. (2021). Industry 4.0 and green supply chain practices: An empirical study. International Journal of Productivity and Performance Management. https://doi.org/10.1108/IJPPM-12-2020-0633CrossRef

Vaidya, S., Ambad, P., & Bhosle, S. (2018). Industry 4.0–a glimpse. Procedia Manufacturing, 20, 233–238.CrossRef

Waibel, M. W., Steenkamp, L. P., Moloko, N., & Oosthuizen, G. A. (2017). Investigating the effects of smart production systems on sustainability elements. Procedia Manufacturing, 8, 731–737.CrossRef

Wamba, S. F., & Queiroz, M. M. (2022). Industry 4.0 and the supply chain digitalisation: A blockchain diffusion perspective. Production Planning & Control, 33(2–3), 193–210.CrossRef

Wang, H., Gu, Y., Li, L., Liu, T., Wu, Y., & Zuo, T. (2017). Operating models and development trends in the extended producer responsibility system for waste electrical and electronic equipment. Resources, Conservation and Recycling, 127, 159–167.CrossRef

Witkowski, K. (2017). Internet of things, big data, industry 4.0–innovative solutions in logistics and supply chains management. Procedia Engineering, 182, 763–769.CrossRef

Xu, L. D., Xu, E. L., & Li, L. (2018). Industry 4.0: State of the art and future trends. International Journal of Production Research, 56(8), 2941–2962.CrossRef

Yadav, D. K., & Barve, A. (2016). Modeling post-disaster challenges of humanitarian supply chains: A TISM approach. Global Journal of Flexible Systems Management, 17(3), 321–340.CrossRef

Yadav, G., Kumar, A., Luthra, S., Garza-Reyes, J. A., Kumar, V., & Batista, L. (2020). A framework to achieve sustainability in manufacturing organisations of developing economies using industry 4.0 technologies’ enablers. Computers in Industry, 122, 103280.CrossRef

Yilmaz, A., Dora, M., Hezarkhani, B., & Kumar, M. (2021). Lean and industry 4.0: Mapping determinants and barriers from a social, environmental, and operational perspective. Technological Forecasting and Social Change. https://doi.org/10.1016/j.techfore.2021.121320CrossRef

Zeng, X., Gong, R., Chen, W. Q., & Li, J. (2016). Uncovering the recycling potential of “New” WEEE in China. Environmental Science & Technology, 50(3), 1347–1358.CrossRef

Ziaei Nafchi, M., & Mohelská, H. (2020). Organizational culture as an indication of readiness to implement industry 4.0. Information, 11(3), 174.CrossRef

Zorrilla, M., & Yebenes, J. (2022). A reference framework for the implementation of data governance systems for industry 4.0. Computer Standards & Interfaces. https://doi.org/10.1016/j.csi.2021.103595CrossRef

Titel: Factors Influencing the Implementation of Industry 4.0 for Sustainability in Manufacturing
verfasst von: Veepan Kumar
Prem Vrat
Ravi Shankar
Publikationsdatum: 23.08.2022
Verlag: Springer India
Erschienen in: Global Journal of Flexible Systems Management / Ausgabe 4/2022
Print ISSN: 0972-2696
Elektronische ISSN: 0974-0198
DOI: https://doi.org/10.1007/s40171-022-00312-1

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Weitere Artikel der Ausgabe 4/2022

Additive Manufacturing and Green Information Systems as Technological Capabilities for Firm Performance

Unleashing the Potential of the TQM and Industry 4.0 to Achieve Sustainability Performance in the Context of a Developing Country

Modeling Enterprise Flexibility and Competitiveness for Indian Pharmaceutical Firms: A Qualitative Study

Adoption of Battery Management System in Utility Grid: An Empirical Study Using Structural Equation Modeling

Do Companies Adopt Big Data as Determinants of Sustainability: Evidence from Manufacturing Companies in Jordan

Do Leadership Styles Influence Employee Information Systems Security Intention? A Study of the Banking Industry

Premium Partner