nach oben

Innovative Infrastructure Solutions

Erschienen in:

01.12.2019 | Practice-oriented papers

Experimental study on the effect of hot climate on the performance of roller-compacted concrete pavement

verfasst von: Moussa Deghfel, Abdelaziz Meddah, Miloud Beddar, Mohamed Aziz Chikouche

Erschienen in: Innovative Infrastructure Solutions | Ausgabe 1/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The aim of this paper is to investigate the effect of hot climate on the performance of roller-compacted concrete which is used for pavement. Mixes were placed in different environments in order to simulate the local climate conditions. Large-scale test has been carried out to assess the mechanical strength development in function of curing mode, temperature treatment and silica fume addition. Compressive strength, splitting tensile strength, shrinkage and capillary absorption of water were evaluated according to the program tests. The main results showed that an increase in temperature (over 40°) affects negatively the physical and mechanical properties due to malformation of hydration products, while cure methods showed a higher efficiency of the improvement in such properties. However, it should be noted that the wet cure method gave the best results as it provides appropriate and effective conditions to the hydration process. Regarding the effect of silica fume addition, even an improvement in the compressive strength was confirmed; however, it has a negative impact on the shrinkage.

Vorheriger Artikel Response of micropiles in different seismic conditions

Nächster Artikel Behavior of vertical and batter piles under lateral, uplift and combined loads in non-cohesive soil

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Debieb F, Courard L, Kenai S, Degeimbre R (2009) Roller compacted concrete with contaminated recycled aggregates. Constr Build Mater 23:3382–3387. https://doi.org/10.1016/j.conbuildmat.2009.06.031 CrossRef

Marchand J, Gagne R, Ouellet E, Lepage S (1997) Mixture proportioning of roller compacted concrete-a review. ACI Spec Publ SP-171:457–487

Meddah A, Bensaci H, Beddar M, Bali A (2017) Study of the effects of mechanical and chemical treatment of rubber on the performance of rubberized roller-compacted concrete pavement. Innov infrastruct Solut. https://doi.org/10.1007/s41062-017-0068-5 CrossRef

Benouadah A, Beddar M, Meddah A (2017) Physical and mechanical behaviour of a roller compacted concrete reinforced with polypropylene fiber. J Fundam Appl Sci 9:623–635. https://doi.org/10.4314/jfas.v9i2.1 CrossRef

Meddah A, Beddar M, Bali A (2014) Use of shredded rubber tire aggregates for roller compacted concrete pavement. J Clean Prod 72:187–192. https://doi.org/10.1016/j.jclepro.2014.02.052 CrossRef

Ramezanianpour AA, Mohammadi A, Dehkordi ER, Chenar QB (2017) Mechanical properties and durability of roller compacted concrete pavements in cold regions. Constr Build Mater 146:260–266. https://doi.org/10.1016/j.conbuildmat.2017.04.099 CrossRef

Ait-Aider H, Hannachi NE, Mouret M (2007) Importance of W/C ratio on compressive strength of concrete in hot climate conditions. Build Environ 42:2461–2465. https://doi.org/10.1016/j.buildenv.2006.05.003 CrossRef

Berhane Z (1992) The behaviour of concrete in hot climates. Mater Struct 25:157–162CrossRef

El-Chabib H, Ibrahim A (2013) The performance of high-strength flowable concrete made with binary, ternary, or quaternary binder in hot climate. Constr Build Mater 47:245–253. https://doi.org/10.1016/j.conbuildmat.2013.05.062 CrossRef

10.

Nazir A, Saeed A (2004) Investigation of extreme weather conditioning. In: 29th Conference on our world in concrete & structures. Singapore, Pergamon

11.

Meddah A (2015) Caractérisation d’un béton compacté contenant des déchets pneumatiques. ENP d’Alger

12.

Nanni A, Meamarian N (1993) Laboratory consolidation methods applied to compacted concrete for pavements. J Mater Civ Eng 5:137–143. https://doi.org/10.1061/(ASCE)0899-1561(1993)5:1(137) CrossRef

13.

ASTM D1557 (1991) Standard test method for laboratory compaction characteristics of soil using modified effort

14.

ASTM C 470/C 470 M (1998) Standard specification for molds for forming concrete test cylinders vertically

15.

ASTM C1435 (2008) Standard practice for molding roller-compacted concrete in cylinder molds using a vibrating hammer, C1435/C1435M-08. 1–5. https://doi.org/10.1520/C1435

16.

Meddah A, Beddar M, Bali A (2014) Experimental study of compaction quality for roller compacted concrete pavement containing rubber tire wastes. In: Sustainability, eco-efficiency and conservation in transportation infrastructure asset management—Proceedings of the 3rd international conference on transportation infrastructure, ICTI 2014CrossRef

17.

ASTM C 39/C 39M (1999) Standard test method for compressive strength of cylindrical concrete specimens

18.

ASTM C496 (2006) Standard test method for splitting tensile strength of cylindrical concrete specimens. ASTM Int 04:1–5. https://doi.org/10.1520/C0496 CrossRef

19.

ASTM C157/C 157M (2003) Standard test method for length change of hardened hydraulic-cement mortar and Concrete. ASTM Int C:1–7

20.

ASTM 1585 (2013) Standard Test method for measurement of rate of absorption of water by hydraulic-cement concretes. ASTM Int 4–9 https://doi.org/10.1520/C1585-13.2

21.

Shoukry SN, William GW, Downie B, Riad MY (2011) Effect of moisture and temperature on the mechanical properties of concrete. Constr Build Mater 25:688–696. https://doi.org/10.1016/j.conbuildmat.2010.07.020 CrossRef

22.

Lawson J, Phan L, Davis F (2000) Mechanical properties of high performance concrete after exposure to elevated temperatures. NISTIR 6475, National technical information service technology administration US Department of commerce springfield, Virginia

23.

Phan LT, Carino NJ (2003) Code provisions for high strength concrete strength-temperature relationship at elevated temperatures. Mater Struct Constr 36:91–98. https://doi.org/10.1617/13811 CrossRef

24.

ACI committee 305 (1991) Hot weather concreting. ACI 305R-91. ACI Mater J

25.

Mittelacher M (1992) Compressive strength and the rising temperature of field concrete. Concr Int 14:29–33

26.

Gallucci E, Zhang X, Scrivener K (Jun 2006) Influence de la temperature sur le developpement microstructural des betons. In: Septième édition des Journées scientifiques du Regroupement francophone pour la recherche et la formation sur le béton (RF)2B, Toulouse

27.

Wang Q, Feng JJ, Yan PY (2011) An explanation for the negative effect of elevated temperature at early ages on the late-age strength of concrete. J Mater Sci 46:7279–7288. https://doi.org/10.1007/s10853-011-5689-z CrossRef

28.

Zacac M, Garrault S, Korb J-P, Nonat, A (2007) Effect of temperature on the development of C-S-H during early hydration of C3S. In: 12th International congress on the chemistry of cement, Jul 2007, Montreal, Canada, pp W1-06.2

29.

Escalante-Garcia JI (2003) Nonevaporable water from neat OPC and replacement materials in composite cements hydrated at different temperatures. Cem Concr Res 33:1883–1888. https://doi.org/10.1016/S0008-8846(03)00208-4 CrossRef

30.

Kurdowski W (2014) Cement and concrete chemistry. Springer, BerlinCrossRef

31.

Lura P, Van Breugel K, Maruyama I (2001) Effect of curing temperature and type of cement on early-age shrinkage of high-performance concrete. Cem Concr Res 31:1867–1872. https://doi.org/10.1016/S0008-8846(01)00601-9 CrossRef

32.

Chu I, Kwon SH, Amin MN, Kim JK (2012) Estimation of temperature effects on autogenous shrinkage of concrete by a new prediction model. Constr Build Mater 35:171–182. https://doi.org/10.1016/j.conbuildmat.2012.03.005 CrossRef

33.

Maruyama I, Teramoto A (2013) Temperature dependence of autogenous shrinkage of silica fume cement pastes with a very low water-binder ratio. Cem Concr Res 50:41–50. https://doi.org/10.1016/j.cemconres.2013.03.017 CrossRef

34.

Bouziadi F, Boulekbache B, Hamrat M (2016) The effects of fibres on the shrinkage of high-strength concrete under various curing temperatures. Constr Build Mater 114:40–48. https://doi.org/10.1016/j.conbuildmat.2016.03.164 CrossRef

35.

Bjontegaard Hammer TA, Sellevold EJ (2004) On the measurement of free deformation of early age cement paste and concrete. Cem Concr Compos 26:427–435. https://doi.org/10.1016/S0958-9465(03)00065-9 CrossRef

36.

Jiang C, Yang Y, Wang Y et al (2014) Autogenous shrinkage of high performance concrete containing mineral admixtures under different curing temperatures. Constr Build Mater 61:260–269. https://doi.org/10.1016/j.conbuildmat.2014.03.023 CrossRef

37.

Yang YZ, Li MG, Deng HW, Liu Q (2014) Effects of temperature on drying shrinkage of concrete. Appl Mech Mater 584–586:1176–1181. https://doi.org/10.4028/www.scientific.net/amm.584-586.1176 CrossRef

38.

Goto Seishi, Roy Della M (1981) The effect of w/c ratio and curing temperature on the permeability of hardened cement paste. Cem Concr Res 11:575–579CrossRef

39.

Joshaghani A, Balapour M, Ramezanianpour AA (2018) Effect of controlled environmental conditions on mechanical, microstructural and durability properties of cement mortar. Constr Build Mater 164:134–149. https://doi.org/10.1016/j.conbuildmat.2017.12.206 CrossRef

40.

Pinto SR, Macedo ALA, Medeiros-Junior RA (2018) Effect of preconditioning temperature on the water absorption of concrete. J Build Pathol Rehabil 3:1–10. https://doi.org/10.1007/s41024-018-0032-6 CrossRef

41.

Wasserman R, Bentur A (2013) Efficiency of curing technologies: strength and durability. Mater Struct Constr 46:1833–1842. https://doi.org/10.1617/s11527-013-0021-9 CrossRef

42.

Bushlaibi AH, Alshamsi AM (2002) Efficiency of curing on partially exposed high-strength concrete in hot climate. Cem Concr Res 32:949–953. https://doi.org/10.1016/S0008-8846(02)00735-4 CrossRef

43.

Al-Gahtani AS (2010) Effect of curing methods on the properties of plain and blended cement concretes. Constr Build Mater 24:308–314. https://doi.org/10.1016/j.conbuildmat.2009.08.036 CrossRef

44.

Maslehuddin M, Ibrahim M, Shameem M et al (2013) Effect of curing methods on shrinkage and corrosion resistance of concrete. Constr Build Mater 41:634–641. https://doi.org/10.1016/j.conbuildmat.2012.12.064 CrossRef

45.

McCarter WJ, Ben-Saleh AM (2001) Influence of practical curing methods on evaporation of water from freshly placed concrete in hot climates. Build Environ 36:919–924. https://doi.org/10.1016/S0360-1323(00)00048-2 CrossRef

46.

Nabil B, Aissa A, Aguida BI (2011) Use of a new approach (design of experiments method) to study different procedures to avoid plastic shrinkage cracking of concrete in hot climates. J Adv Concr Technol 9:149–157. https://doi.org/10.3151/jact.9.149 CrossRef

47.

Bella N, Bella IA, Asroun A (2017) A review of hot climate concreting, and the appropriate procedures for ordinary jobsites in developing countries. In: MATEC Web of Conferences, vol 120, p 02024. https://doi.org/10.1051/matecconf/201712002024 CrossRef

48.

Taylor H (1997) Cement chemistry. Tomas Telford, WestminsterCrossRef

49.

Bhanja S, Sengupta B (2005) Influence of silica fume on the tensile strength of concrete. Cem Concr Res 35:743–747. https://doi.org/10.1016/j.cemconres.2004.05.024 CrossRef

50.

Mohamed HA (2011) Effect of fly ash and silica fume on compressive strength of self-compacting concrete under different curing conditions. Ain Shams Eng J 2:79–86. https://doi.org/10.1016/j.asej.2011.06.001 CrossRef

51.

Hu J, Stroeven P (2004) Properties of the interfacial transition zone in model concrete. Interface Sci 12:389–397. https://doi.org/10.1023/B:INTS.0000042337.39900.fb CrossRef

52.

Xuan DX, Shui ZH, Wu SP (2009) Influence of silica fume on the interfacial bond between aggregate and matrix in near-surface layer of concrete. Constr Build Mater 23:2631–2635. https://doi.org/10.1016/j.conbuildmat.2009.01.006 CrossRef

53.

Al-Amoudi OSB, Maslehuddin M, Shameem M, Ibrahim M (2007) Shrinkage of plain and silica fume cement concrete under hot weather. Cem Concr Compos 29:690–699. https://doi.org/10.1016/j.cemconcomp.2007.05.006 CrossRef

54.

Ghassemzadeh F, Shekarchi M, Sajedi S, et al (2012) Effect of silica fume and GGBS on shrinkage in the high performance concrete. In: Concr Under Sev Cond Two Vol Set c:1007–1012. https://doi.org/10.1201/b10552-128 CrossRef

55.

Hooton RD (1993) Influence of silica fume replacement of cement on physical properties and resistance to sulfate attack, freezing and thawing, and alkali-silica reactivity. ACI Mater J 90:143–151. https://doi.org/10.14359/4009 CrossRef

Titel: Experimental study on the effect of hot climate on the performance of roller-compacted concrete pavement
verfasst von: Moussa Deghfel
Abdelaziz Meddah
Miloud Beddar
Mohamed Aziz Chikouche
Publikationsdatum: 01.12.2019
Verlag: Springer International Publishing
Erschienen in: Innovative Infrastructure Solutions / Ausgabe 1/2019
Print ISSN: 2364-4176
Elektronische ISSN: 2364-4184
DOI: https://doi.org/10.1007/s41062-019-0246-8

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Weitere Artikel der Ausgabe 1/2019

Load transfer and creep behavior of open-ended pipe piles in frozen and unfrozen ground

Thermal imbalance due to application of geothermal energy piles and mitigation strategies for sustainable development in cold regions: a review

Development of full-scale laboratory accelerated pavement testing facility: a step toward performance assessment of geosynthetics reinforced pavement

Response of buried uPVC pipes subjected to earthquake shake

Seismic assessment of the historical third tower in San Marino based on a 3D laser scanner survey (3D-LSS)

Effect of addition of construction–demolition waste on strength characteristics of high plastic clays