nach oben

Erschienen in:

2019 | OriginalPaper | Buchkapitel

Topological Optimization of a Structural Naval Component Manufactured in FDM

verfasst von : A. Mancuso, G. Pitarresi, A. Saporito, D. Tumino

Erschienen in: Advances on Mechanics, Design Engineering and Manufacturing II

Verlag: Springer International Publishing

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this paper, a topological optimization procedure has been applied on a real component of the deck of a sailing multi-hull in order to find the internal shape that best save the material used in the manufacturing process without a relevant loss of structural rigidity. The multi-hull boat is a 16 feet length catamaran equipped with an asymmetric foil on both centerboards and with a symmetric foil on both rudders. The task of the analyzed object is to act as a cylindrical support for the screw that drives the rotation of the centerboard. The process adopted to manufacture this object is the Fused Deposition Modeling (FDM) technique, because of its high versatility and its relative low-cost impact. The aim of this work is to verify the applicability of FDM to structural naval component subjected to demanding loads during navigation and, at the same time, to investigate on the robustness of a topology optimization strategy in creating new shapes that recent additive manufacturing are able to create.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Investigation of Aluminum Alloy Properties During Helical Roller Burnishing Through Finite Element Simulations and Experiments

Nächstes Kapitel The Influence of Build Orientation on the Flatness Error in Artifact Produced by Direct Metal Laser Sintering (DMLS) Process

Rezaie R, Badrossamay M, Ghaie A, Moosavi H (2013) Topology optimization for fused deposition modeling process. In: Lauwers B, Kruth J-P (eds) The Seventeenth CIRP Conference on Electro Physical and Chemical Machining (ISEM), Procedia CIRP 6:521–526. https://doi.org/10.1016/j.procir.2013.03.098

Cirello A, Cucinotta F, Ingrassia T, Nigrelli V, Sfravara F (in press) Fluid-structure interaction of downwind sails: a new computational method. J Mar Sci Technol. https://doi.org/10.1007/s00773-018-0533-7

Mancuso A, Pitarresi G, Tumino D (in press) Using FEM simulation to predict structural performances of a sailing dinghy. Int J Interact Des Manufs

Cappello F, Ingrassia T, Mancuso A, Nigrelli V (2005) Methodical redesign of a semitrailer. WIT Trans Built Environ 80:359–369

Mirzendehdel AM, Rankouhi B, Suresh K (2018) Strength-based topology optimization for anisotropic parts. Addit Manuf 19:104–113. https://doi.org/10.1016/j.addma.2017.11.007CrossRef

Di Angelo L, Di Stefano P, Marzola A (2017) Surface quality prediction in FDM additive manufacturing. Int J Adv Manuf Technol 93(9–12):3655–3662. https://doi.org/10.1007/s00170-017-0763-6

Ahsan AMMN, Habib MA, Khoda B (2015) Resource based process planning for additive manufacturing. Comput Aided Des 69:112–125. https://doi.org/10.1016/j.cad.2015.03.006

Thrimurthulu K, Pandey PM, Reddy NV (2004) Optimum part deposition orientation in fused deposition modeling. Mach Tools Manuf 44(6):585–594. https://doi.org/10.1016/j.ijmachtools.2003.12.004CrossRef

Rattanawong W, Masood SH, Iovenitti P (2001) A volumetric approach to part-build orientations in rapid prototyping. J Mater Process Technol 119(1–3):348–353. https://doi.org/10.1016/S0924-0136(01)00924-4CrossRef

10.

Ahna D, Kimb H, Lee S (2007) Fabrication direction optimization to minimize post-machining in layer manufacturing. Int J Mach Tools Manuf 47(3):593–606. https://doi.org/10.1016/j.ijmachtools.2006.05.004CrossRef

11.

Zwier MP, Wits WW (2016) Design for additive manufacturing: automated build orientation selection and optimization. In: Alexopoulos A (ed) 5th CIRP Global Web Conference Research and Innovation for Future Production, Procedia CIRP 55:128–133. https://doi.org/10.1016/j.procir.2016.08.040

12.

Ahsan N, Khoda B (2016) AM optimization framework for part and process attributes through geometric analysis. Addit Manuf 11:85–96. https://doi.org/10.1016/j.addma.2016.05.013CrossRef

13.

Mirulla AI, Bragonzoni L, Zaffagnini S, Bontempi M, Nigrelli V, Ingrassia T (in press) Virtual simulation of an osseointegrated trans-humeral prosthesis: A falling scenario. Injury. https://doi.org/10.1016/j.injury.2018.03.004

14.

Ingrassia T, Nalbone L, Nigrelli V, Ricotta V, Pisciotta D (in press) Biomechanical analysis of the humeral tray positioning in reverse shoulder arthroplasty design. Int J Interact Des Manuf. https://doi.org/10.1007/s12008-017-0418-8

15.

He X, Liao Y, Liang X (2013) Mechanical properties Analysis on honeycomb sandwich structure considering flexural rigidity of face sheets. Adv Mater Res 705:216–222. https://doi.org/10.4028/www.scientific.net/AMR.705.216CrossRef

16.

Da DC, Cui XY, Long K, Li GY (2017) Concurrent topological design of composite structures and the underlying multi-phase materials. Comput Struct 179:1–14. https://doi.org/10.1016/j.compstruc.2016.10.006CrossRef

Titel: Topological Optimization of a Structural Naval Component Manufactured in FDM
verfasst von: A. Mancuso
G. Pitarresi
A. Saporito
D. Tumino
Verlag: Springer International Publishing
Buch: Advances on Mechanics, Design Engineering and Manufacturing II
Print ISBN: 978-3-030-12345-1

Electronic ISBN: 978-3-030-12346-8

Copyright-Jahr: 2019
DOI: https://doi.org/10.1007/978-3-030-12346-8_44

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partner

Marktübersichten