Material properties and nondestructive evaluation of laminated veneer lumber (LVL) made from Pinus oocarpa and P. kesiya

This study aimed at evaluating the mechanical, physical and biological properties of laminated veneer lumber (LVL) made from Pinus oocarpa Schiede ex Schltdl (PO) and Pinus kesiya Royle ex Gordon (PK) and at providing a nondestructive characterization thereof. Four PO and four PK LVL boards from 22 randomly selected 2-mm thickness veneers were produced according to the following characteristics: phenol-formaldehyde (190 g/m²), hot-pressing at 150°C for 45 min and 2.8 N/mm² of specific pressure. After board production, nondestructive evaluation was conducted, and stress wave velocity (v ₀) and dynamic modulus of elasticity (E _Md ) were determined. The following mechanical and physical properties were then evaluated: static bending modulus of elasticity (E _M ), modulus of rupture (f _M ), compression strength parallel to grain (f _c,0), shear strength parallel to glue-line (f _v,0), shear strength perpendicular to glue-line (f _v,90), thickness swelling (TS), water absorption (WA), and permanent thickness swelling (PTS) for 2, 24, and 96-hour of water immersion. Biological property was also evaluated by measuring the weight loss by Trametes versicolor (Linnaeus ex Fries) Pilát (white-rot) and Gloeophyllum trabeum (Persoon ex Fries.) Murrill (brown-rot). After hot-pressing, no bubbles, delamination nor warping were observed for both species. In general, PK boards presented higher mechanical properties: E _M , E _Md , f _M , f _c,0 whereas PO boards were dimensionally more stable, with lower values of WA, TS and PTS in the 2, 24, and 96-hour immersion periods. Board density, f _v,0, f _v,90 and rot weight loss were statistically equal for PO and PK LVL. The prediction of flexural properties of consolidated LVL by the nondestructive method used was not very efficient, and the fitted models presented lower predictability.