nach oben

Research in Engineering Design

Erschienen in:

01.10.2012 | Original Paper

A method to assess the effects of engineering change propagation

verfasst von: Edwin C. Y. Koh, Nicholas H. M. Caldwell, P. John Clarkson

Erschienen in: Research in Engineering Design | Ausgabe 4/2012

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This paper presents a modelling method that seeks to support the prediction and management of undesired engineering change (EC) propagation during the design and development of complex products. The method builds on the house of quality and the change prediction method to model the effects of potential change propagation brought about by different change options. The objective is to better reflect how well each change option can address the product requirements. The method was applied to the design of a jet engine fan during a case study with an aerospace company. The findings suggest that this modelling approach is suitable for assessing the effects of potential EC propagation and can support companies in effective exploration of the design space.

Vorheriger Artikel Multilayer network model for analysis and management of change propagation

Nächster Artikel Developing a parameter linkage-based method for searching change propagation paths

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Ahmad N, Wynn DC, Clarkson PJ (2010) Development and evaluation of a tool to estimate the impact of design change. In: Proceedings of the international design conference (DESIGN’10), Dubrovnik, Croatia

Almefelt L, Berglund F, Nilsson P, Malmqvist J (2006) Requirements management in practice: findings from an empirical study in the automotive industry. Res Eng Des 17:113–134CrossRef

Ariyo OO (2007) Change propagation in complex design: predicting detailed changes cases with multi-levelled product models. PhD Dissertation, University of Cambridge

Ariyo OO, Eckert CM, Clarkson PJ (2004) Tolerance margins as constraining factors of changes in complex products. In: Proceedings of the integrated product development workshop (IPD’04), Magdeburg, Germany

Aurich JC, Roessing M (2007) Engineering change impact analysis in production using VR. In: Cunha P, Maropoulos P (eds) Digital enterprise technology: perspectives and future challenges. Springer, New York, pp 75–82

Bergsjö D, Ćatić A, Malmqvist J (2008) Implementing a service-oriented PLM architecture focusing on support for engineering change management. Int J Prod Lifecycle Manag 3:335–355CrossRef

Bischof A, Blessing L (2008) Guidelines for the development of flexible products. In: Proceedings of the international design conference (DESIGN’08), Dubrovnik, Croatia

Browning TR (2001) Applying the design structure matrix to system decomposition and integration problems: a review and new directions. IEEE Trans Eng Manag 48:292–306CrossRef

Clark KB, Fujimoto T (1991) Product development performance: strategy, organisation and management in the world auto industries. Harvard Business School Press, Boston

Clarkson PJ, Simons C, Eckert CM (2004) Predicting change propagation in complex design. J Mech Des 126:765–797CrossRef

Cohen T, Navathe SB, Fulton RE (2000) C-FAR, change favourable representation. Comput Aided Des 32:321–338CrossRef

Conrad J, Deubel T, Kohler C, Wanke S, Weber C (2007) Change impact and risk analysis (CIRA)—combining the CPM/PDD theory and FMEA methodology for an improved engineering change management. In: Proceedings of the international conference on engineering design (ICED’07), Paris, France

Coughlan PD (1992) Engineering change and manufacturing engineering deployment in new product development. In: Susman GI (ed) Integrating design and manufacturing for competitive advantage. Oxford University Press, New York, pp 157–177

Danilovic M, Browning TR (2007) Managing complex product development projects with design structure matrices and domain mapping matrices. Int J Proj Manag 25:300–314CrossRef

Diprima M (1982) Engineering change control and implementation considerations. Prod Invent Manag 23:81–87

Eckert CM, Clarkson PJ, Zanker W (2004) Change and customisation in complex engineering domains. Res Eng Des 15:1–21CrossRef

Eckert CM, de Weck O, Keller R, Clarkson PJ (2009) Engineering change: drivers, sources, and approaches in industry. In: Proceedings of the international conference on engineering design (ICED’09), Stanford, CA, USA

Fricke E, Schulz AP (2005) Design for changeability (DFC): principles to enable changes in systems throughout their entire lifecycle. Syst Eng 8:342–359CrossRef

Fricke E, Gebhard B, Negele H, Igenbergs E (2000) Coping with changes: causes, findings and strategies. Syst Eng 3:169–179CrossRef

Giffin ML, de Weck O, Buonova G, Keller R, Eckert CM, Clarkson PJ (2009) Change propagation analysis in complex technical systems. ASME J Mech Design 131. doi:10.1115/1.3149847

Gotel O, Finkelstein A (1994) An analysis of the requirements traceability problem. In: Proceedings of the international conference on requirements engineering (ICRE’94), Colorado Springs, Colorado, USA

Guenov MD, Barker SG (2005) Application of axiomatic design and design structure matrix to the decomposition of engineering systems. Syst Eng 8:29–40CrossRef

Hauser JR, Clausing D (1988) The house of quality. Harv Bus Rev 66:63–73

Hedge GG, Kekre S, Kekre S (1992) Engineering changes and time delays: a field investigation. Int J Prod Econ 28:341–352CrossRef

Ho CJ, Li J (1997) Progressive engineering changes in multi-level product structures. Omega Int J Manag Sci 25:585–594CrossRef

Hsiao SW, Liu E (2005) A structural component-based approach for designing product family. Comput Ind 56:13–38CrossRef

Isaac S, Navon R (2008) Feasibility study of an automated tool for identifying the implications of changes in construction projects. J Constr Eng Manag 134:139–145CrossRef

Isaac S, Navon R (2009) Modeling building projects as a basis for change control. Autom Constr 18:656–664CrossRef

Jarke M, Loucopoulos P, Lyytinen K, Mylopoulos J (2011) The brave new world of design requirements. Inf Syst 36(7):992–1008CrossRef

Jarratt T, Clarkson PJ, Eckert CM (2005) Engineering change. In: Clarkson PJ, Eckert CM (eds) Design process improvement: a review of current practice. Springer, London, pp 262–285

Jarratt T, Eckert CM, Caldwell NHM, Clarkson PJ (2011) Engineering change: an overview and perspective on the literature. Res Eng Des 22:103–124CrossRef

Keller R (2007) Predicting change propagation: algorithms, representations, software tools. PhD Dissertation, University of Cambridge

Kocar V, Akgunduz A (2010) ADVICE: a virtual environment for engineering change management. Comput Ind 61:15–28CrossRef

Koh ECY, Keller R, Eckert CM, Clarkson PJ (2008) Influence of feature change propagation on product attributes in concept selection. In: Proceedings of the international design conference (DESIGN’08), Dubrovnik, Croatia

Kohler C, Conrad J, Wanke S, Weber C (2008) A matrix representation of the CPM/PDD approach as a means for change impact analysis. In: Proceedings of the international design conference, (DESIGN’08), Dubrovnik, Croatia

Lee GH, Kusiak A (2001) The house of quality for design rule priority. Int J Adv Manuf Technol 17:288–296CrossRef

Lee HJ, Ahn HJ, Kim JW, Park SJ (2006) Capturing and reusing knowledge in engineering change management: a case of automobile development. Inf Syst Front 8:375–394CrossRef

Leech DJ, Turner BT (1985) Engineering design for profit. Ellis Horwood, Chichester

Lindemann U, Maurer M, Braun T (2009) Structural complexity management. Springer, BerlinCrossRef

Ma Y, Chen G, Thimm G (2008) Change propagation algorithm in a unified feature modelling scheme. Comput Ind 59:110–118CrossRef

Martin MV, Ishii K (2002) Design for variety: developing standardized and modularized product platform architectures. Res Eng Des 13:213–235

Maull R, Hughes D, Bennett J (1992) The role of the bill-of-materials as a CAD/CAPM interface and the key importance of engineering change control. Comput Control Eng J 3:63–70CrossRef

Ollinger GA, Stahovich TF (2004) RedesignIT—a model-based tool for managing design changes. J Mech Des 126:208–216CrossRef

Palani Rajan PK, Van Wie M, Campbell MI, Wood KL, Otto KN (2005) An empirical foundation for product flexibility. Des Stud 26:405–438CrossRef

Pikosz P, Malmqvist J (1998) A comparative study of engineering change management in three Swedish companies. In: Proceedings of the ASME design engineering technical conference (DETC’98), Atlanta, GA, USA

Pugh S (1990) Total design: integrated methods for successful product engineering. Addison Wesley, Reading

Rios J, Roy R, Lopez A (2007) Design requirements change and cost impact analysis in airplane structures. Int J Prod Econ 109:65–80CrossRef

Rouibah K, Caskey KR (2003) Change management in concurrent engineering from a parameter perspective. Comput Ind 50:15–34CrossRef

Rutka A, Guenov M, Lemmens Y, Schmidt-Schäffer T, Coleman P, Rivière A (2006) Methods for engineering change propagation analysis. In: Proceedings of the 25th international congress of the aeronautical sciences (ICAS 2006), Hamburg, Germany

Simons CS (2000) Change propagation in product design. MPhil Dissertation, University of Cambridge

Smith RP, Eppinger SD (1997) A predictive model of sequential iteration in engineering design. Manag Sci 43:1104–1120MATHCrossRef

Sudin MN, Ahmed S (2009) Investigation of change in specifications during a product’s lifecycle. In: Proceedings of the international conference on engineering design (ICED’09), Stanford, CA, USA

Suh ES, de Weck O, Chang D (2007) Flexible product platform: framework and case study. Res Eng Des 18:67–89CrossRef

Sutinen K, Gustafsson G, Malmqvist J (2004) Computer support for requirements management in an international product development project. In: Proceedings of DETC’04: ASME 2004 design engineering technical conferences and computers and information in engineering conference

Tang D, Xu R, Tang J, He R (2008) Design structure matrix-based engineering change management for product development. Int J Internet Manuf Serv 1:231–245CrossRef

Terwiesch C, Loch CH (1999) Managing the process of engineering change orders: the case of the climate control system in automobile development. J Prod Innov Manag 16:160–172CrossRef

Ulrich KT, Eppinger SD (1995) Product design and development. McGraw-Hill, New York

Wanstrom C, Medbo P, Johansson MI (2001) Engineering change from a logistics perspective. In: Proceedings of the nordic logistics research network conference (NOFOMA), Reykjavik, Iceland

Weber M, Weisbrod J (2002) Requirements engineering in automotive development—experiences and challenges. In: Proceedings of the IEEE joint international conference on requirements engineering (RE’02)

Weber C, Werner H, Deubel T (2003) A different view on product data management/product life-cycle management and its future potentials. J Eng Des 14:447–464CrossRef

Titel: A method to assess the effects of engineering change propagation
verfasst von: Edwin C. Y. Koh
Nicholas H. M. Caldwell
P. John Clarkson
Publikationsdatum: 01.10.2012
Verlag: Springer-Verlag
Erschienen in: Research in Engineering Design / Ausgabe 4/2012
Print ISSN: 0934-9839
Elektronische ISSN: 1435-6066
DOI: https://doi.org/10.1007/s00163-012-0131-3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2012

Multilayer network model for analysis and management of change propagation

Developing a parameter linkage-based method for searching change propagation paths

Reasons for change propagation: a case study in an automotive OEM

Managing design variety, process variety and engineering change: a case study of two capital good firms

Guest editorial

Premium Partner

Marktübersichten