Skip to main content
Fachgebiete
Automobil + Motoren Bauwesen + Immobilien Business IT + Informatik Elektrotechnik + Elektronik Energie + Nachhaltigkeit Finance + Banking Management + Führung Marketing + Vertrieb Maschinenbau + Werkstoffe Versicherung + Risiko
DE
EN
Themenseiten
Organisationspsychologie Projektmanagement Marketing Smart Manufacturing
Bücher
Zeitschriften
Weitere Formate
Podcasts Webinare Technik Webinare Wirtschaft Kongresse Veranstaltungskalender Awards
Jetzt Einzelzugang starten
Zugang für Unternehmen
Referenzkunden
MTZ-Fachkongress

Antriebe und Energiesysteme von morgen


Austausch von Automobil- und Energiewirtschaft

Am 14./15. Mai geht es in Chemnitz um die Mobilitätswende durch Elektro- und Wasserstofffahrzeuge.
Erweiterte Suche
Anmelden
nach oben
The International Journal of Advanced Manufacturing Technology
Erschienen in: The International Journal of Advanced Manufacturing Technology 3-4/2020

03.10.2020 | ORIGINAL ARTICLE

Dynamic performance test under complicated motion states for five-axis machine tools based on double ballbar

verfasst von: Qicheng Ding, Wei Wang, Li Du, Jiexiong Ding, Jing Zhang, Liping Wang

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 3-4/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

During five-axis CNC machining, the dynamic tracking error caused by imperfect servo dynamic performance is becoming the major factor affecting the accuracy during high-speed and high-precision manufacturing. The double ballbar (DBB) test is one of the commonly used dynamic performance tests, but existing DBB test methods do not have satisfactory test capability for the requirement of complex freeform surface machining. In this paper, on the basis of summarized of dynamic tracking error’s mechanism and characteristics, an improved dynamic performance test based on DBB, which is named the circle-8 test, is proposed. In this test, a provenly efficient RTCP test trajectory is used to rebuild the DBB test process, which includes complex movements of all the five motion axes. To exhibit the improvement of the circle-8 test, this test and the BK3 test of ISO standard, which is considered as a comparison, are conducted in a five-axis machine tool with a tilting rotary table. According to the simulation and experiment results, for common dynamic inaccuracy situations, the circle-8 test always has better sensitivity of dynamic performance test than BK3 test. The above-improved dynamic performance test can be applied to provide effective data for the research of modeling and error reduction of five-axis machine tools.
Vorheriger Artikel Porous collagen scaffold micro-fabrication: feature-based process planning for computer numerically controlled laser systems
Nächster Artikel Detection and visualization of chatter in gear hobbing based on combination of time and frequency domain analysis

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Jetzt informieren
Literatur
1.
Andolfatto L, Lavernhe S, Mayer J (2011) Evaluation of servo, geometric and dynamic error sources on five-axis high-speed machine tool. Int J Mach Tools Manuf 51(10–11):787–796
2.
Slamani M, Mayer R, Balazinski M, Zargarbashi SH, Engin S, Lartigue C (2010) Dynamic and geometric error assessment of an XYC axis subset on five-axis high-speed machine tools using programmed end point constraint measurements. Int J Adv Manuf Technol 50(9–12):1063–1073
3.
Jia Z-y, Ma J-w, Song D-n, Wang F-j, Liu W (2018) A review of contouring-error reduction method in multi-axis CNC machining. Int J Mach Tools Manuf 125:34–54
4.
Lei W-T, Wang W-C, Fang T-C (2014) Ballbar dynamic tests for rotary axes of five-axis CNC machine tools. Int J Mach Tools Manuf 82:29–41
5.
Lin M-T, Wu S-K (2013) Modeling and analysis of servo dynamics errors on measuring paths of five-axis machine tools. Int J Mach Tools Manuf 66:1–14
6.
Jiang Z, Ding J, Ding Q, Du L, Wang W (2018) An attempt of error tracing and compensation method of the linkage error of five-axis CNC Machine tool. In: ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers Digital Collection
7.
Jiang Z, Ding J, Zhang J, Du L, Wang W (2018) Research on error tracing method of five-axis CNC machine tool linkage error. J Braz Soc Mech Sci Eng 40(4):209
8.
Jia Z, Song D, Ma J, Gao Y (2017) Pre-compensation for continuous-path running trajectory error in high-speed machining of parts with varied curvature features. Chin J Mech Eng 30(1):37–45
9.
Zhang D, Chen Y, Chen Y (2016) Iterative pre-compensation scheme of tracking error for contouring error reduction. Int J Adv Manuf Technol 87(9–12):3279–3288
10.
Song D-n, Ma J-w, Jia Z-y, Gao Y-y (2017) Estimation and compensation for continuous-path running trajectory error in high-feed-speed machining. Int J Adv Manuf Technol 89(5–8):1495–1508
11.
Zhang K, Yuen A, Altintas Y (2013) Pre-compensation of contour errors in five-axis CNC machine tools. Int J Mach Tools Manuf 74:1–11
12.
Yang S, Ghasemi AH, Lu X, Okwudire CE (2015) Pre-compensation of servo contour errors using a model predictive control framework. Int J Mach Tools Manuf 98:50–60
13.
Zhang L, Wu T, Huang F (2014) A coupling motional control method based on parametric predictive and variable universe fuzzy control for multi-axis CNC machine tools. Int J Adv Manuf Technol 74(5-8):1097–1114
14.
Yang J, Altintas Y (2015) A generalized on-line estimation and control of five-axis contouring errors of CNC machine tools. Int J Mach Tools Manuf 88:9–23
15.
Yang J, Zhang H-T, Ding H (2017) Contouring error control of the tool center point function for five-axis machine tools based on model predictive control. Int J Adv Manuf Technol 88(9–12):2909–2919
16.
Wu J, Xiong Z, Ding H (2015) Integral design of contour error model and control for biaxial system. Int J Mach Tools Manuf 89:159–169
17.
Zhong G, Shao Z, Deng H, Ren J (2017) Precise position synchronous control for multi-axis servo systems. IEEE Trans Ind Electron 64(5):3707–3717
18.
Zhang J, Ding J, Li Q, Jiang Z, Ding Q, Du L, Wang W (2019) A new contouring error estimation for the high form accuracy of a multi-axis CNC machine tool. Int J Adv Manuf Technol 101(5–8):1403–1421
19.
Erkorkmaz K, Altintas Y (2001) High speed CNC system design. Part I: Jerk limited trajectory generation and quintic spline interpolation. Int J Mach Tool Manu 41(9):1323–1345
20.
Lee AC, Lin M-T, Pan Y-R, Lin W-Y (2011) The feedrate scheduling of NURBS interpolator for CNC machine tools. Comput Aided Des 43(6):612–628
21.
Dong J, Wang T, Li B, Ding Y (2014) Smooth feedrate planning for continuous short line tool path with contour error constraint. Int J Mach Tool Manu 76:1–12
22.
Lin MT, Tsai MS, Yau HT (2007) Development of a dynamics-based NURBS interpolator with real-time look-ahead algorithm. Int J Mach Tool Manu 47(15):2246–2262
23.
Calleja A, Bo P, González H, Bartoň M, de Lacalle LNL (2018) Highly accurate 5-axis flank CNC machining with conical tools. Int J Adv Manuf Technol 97(5-8):1605–1615
24.
Bo P, Bartoň M, Pottmann H (2017) Automatic fitting of conical envelopes to free-form surfaces for flank CNC machining. Comput Aided Des 91:84–94
25.
Bo P, Bartoň M, Plakhotnik D, Pottmann H (2016) Towards efficient 5-axis flank CNC machining of free-form surfaces via fitting envelopes of surfaces of revolution. Comput Aided Des 79:1–11
26.
NAS979 (1969) Uniform cutting test-NAS series. metal cutting equipment. NAS, USA
27.
Wang W, Jiang Z, Li Q, Tao W (2015) A new test part to identify performance of five-axis machine tool-Part II validation of S part. Int J Adv Manuf Technol 79(5-8):739–756
28.
Wang W, Jiang Z, Tao W, Zhuang W (2015) A new test part to identify performance of five-axis machine tool—part I: geometrical and kinematic characteristics of S part. Int J Adv Manuf Technol 79(5–8):729–738
29.
Song Z, Cui Y (2011) S-shape detection test piece and a detection method for detecting the precision of the numerical control milling machine. US Patent US8061052B2
30.
ISO 10791 (2020) Test conditions for machining centers-part 7: accuracy of finished test pieces
31.
Weikert S (2004) R-test, a new device for accuracy measurements on five axis machine tools. CIRP Ann 53(1):429–432
32.
Jywe W, Hsu T-H, Liu C-H (2012) Non-bar, an optical calibration system for five-axis CNC machine tools. Int J Mach Tools Manuf 59:16–23
33.
Hong C, Ibaraki S (2013) Non-contact R-test with laser displacement sensors for error calibration of five-axis machine tools. Precis Eng 37(1):159–171
34.
Ding J, Zhou Z, Liu F, Du L, Wang W, Jiang Z, Song Z, Jiang J, Huang Z, Deng M (2015) Five-axis machine tool cutter posture and cutter tip position error synchronous detection mechanism. In: Europe Patent EP3238875B1
35.
Zhong L, Bi Q, Huang N, Wang Y (2018) Dynamic accuracy evaluation for five-axis machine tools using S trajectory deviation based on R-test measurement. Int J Mach Tools Manuf 125:20–33
36.
Jiang Z, Ding J, Zhang J, Ding Q, Li Q, Du L, Wang W (2019) Research on detection of the linkage performance for five-axis CNC machine tools based on RTCP trajectories combination. Int J Adv Manuf Technol 100(1–4):941–962
37.
Ding Q, Wang W, Jiang Z, Zhang J, Du L (2019) Comparison of the generating method and detecting ability of RTCP trajectories for five-axis CNC machine tool. J Mech Eng 55(20):116–127 (in Chinese)
38.
Bryan J (1982) A simple method for testing measuring machines and machine tools. Part 2: construction details. Precis Eng 4(3):125–138
39.
Bryan J (1982) A simple method for testing measuring machines and machine tools part 1: principles and applications. Precis Eng 4(2):61–69
40.
Lei W, Sung M, Liu W, Chuang Y (2007) Double ballbar test for the rotary axes of five-axis CNC machine tools. Int J Mach Tools Manuf 47(2):273–285
41.
Lei W, Paung I, Yu C-C (2009) Total ballbar dynamic tests for five-axis CNC machine tools. Int J Mach Tools Manuf 49(6):488–499
42.
Le Flohic J, Paccot F, Bouton N, Chanal H (2018) Model-based method for feed drive tuning applied to serial machine tool. Int J Adv Manuf Technol 95(1–4):735–745
43.
ISO 10791 (2009) Test conditions for machining centers-part 6: accuracy of feeds, speeds and interpolations
44.
Kato N, Sato R, Tsutsumi M (2012) 3D circular interpolation motion equivalent to cone-frustum cutting in five-axis machining centers and its sensitivity analysis. Procedia Cirp 1 (none)
45.
Kato N, Tsutsumi M, Sato R (2013) Analysis of circular trajectory equivalent to cone-frustum milling in five-axis machining centers using motion simulator. Int J Mach Tool Manu 64:1–11
46.
Kato N, Tsutsumi M, Tsuchihashi Y, Sato R, Ihara Y (2013) Sensitivity analysis in ball bar measurement of three-dimensional circular movement equivalent to cone-frustum cutting in five-axis machining centers. J Adv Mech Des Syst Manuf 7(3):317–332
47.
Tsutsumi M, Yumiza D, Utsumi K, Sato R (2007) Evaluation of synchronous motion in five-axis machining centers with a tilting rotary table. J Adv Mech Des Syst Manuf 1(1):24–35
48.
Tsai CY, Lin PD (2009) The mathematical models of the basic entities of multi-axis serial orthogonal machine tools using a modified Denavit–Hartenberg notation. Int J Adv Manuf Technol 42(9–10):1016–1024
Metadaten
Titel
Dynamic performance test under complicated motion states for five-axis machine tools based on double ballbar
verfasst von
Qicheng Ding
Wei Wang
Li Du
Jiexiong Ding
Jing Zhang
Liping Wang
Publikationsdatum
03.10.2020
Verlag
Springer London
Erschienen in
The International Journal of Advanced Manufacturing Technology / Ausgabe 3-4/2020
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI
https://doi.org/10.1007/s00170-020-06101-3

Weitere Artikel der Ausgabe 3-4/2020

The International Journal of Advanced Manufacturing Technology 3-4/2020 Zur Ausgabe

ORIGINAL ARTICLE

Detection and visualization of chatter in gear hobbing based on combination of time and frequency domain analysis

ORIGINAL ARTICLE

Teleoperation of industrial robot manipulators based on augmented reality

ORIGINAL ARTICLE

Manufacturing of the surfaces of spline fitting connection

ORIGINAL ARTICLE

Effect of plate thickness on weld pool dynamics and keyhole-induced porosity formation in laser welding of Al alloy

ORIGINAL ARTICLE

The effect of processing parameters on the mechanical characteristics of PLA produced by a 3D FFF printer

ORIGINAL ARTICLE

Study of the microstructures and mechanical properties of ZK61 magnesium alloy cylindrical parts with inner ribs formed by hot power spinning

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Zur Marktübersicht
    Bildnachweise